|
|
|
getVirtualSensorStatistics :
Analysis Engine is busy
|
Analysis Engine is busy because the virtual sensor has not finished initializing. |
show statistics virtual-sensor |
getVirtualSensorStatistics : Analysis Engine is busy rebuilding regex tables. This may take a while. |
Analysis Engine is busy building cache files immediately after the sensor has been imaged. |
show statistics virtual-sensor |
editConfigDeltaSignatureDefinition : Analysis Engine is busy rebuilding regex tables. This may take a while. |
Analysis Engine is busy building cache files immediately after the sensor has been imaged. |
service signature-definition |
Invalid command received. |
The .conf file and code are out of synchronization, which should never occur in the field. |
All commands |
Invalid port number was entered. |
An out-of-range port number was entered in URI. |
copy, upgrade, show tech-support |
Invalid scheme was entered. |
Internal tables are out of synchronization, which should never occur in the field. |
copy, upgrade, show tech-support |
Unknown scheme was entered. |
An invalid scheme was entered in URI. |
copy, upgrade, show tech-support |
The filename <file> is not a valid upgrade file type. |
Attempt to install the wrong file for your platform and version. |
upgrade |
idsPackageMgr: digital
signature of the update was
not valid
|
The signature update or service pack is corrupt. Contact TAC. |
upgrade |
Cannot create a new event-action-rules configuration. "rules0" is currently the only configuration allowed. |
An invalid logical instance name was entered for service event action rules.1 |
service event-action-rules |
Cannot create a new signature-definition configuration. "sig0" is currently the only configuration allowed. |
An invalid logical instance name was entered for service signature definition.2 |
service signature-definition |
Cannot create a new anomaly-detection configuration. "ad0" is currently the only configuration allowed. |
An invalid logical instance name was entered for service anomaly detection.3 |
service anomaly-detection |
User does not exist. |
The administrator is attempting to change the password for a username that does not exist in the system. |
password |
Incorrect password for user account. |
The user entered an invalid password while attempting to change the password. |
password |
Empty user list. |
The curUserAccountList.xml file does not contain any entries, which should never occur in the field. |
username |
User already exists . |
An attempt to create a user that already exists in the system was made. |
username |
Cannot communicate with system processes. Please contact your system administrator. |
One or more required applications is not responding to control transactions. |
All commands |
Source and Destination are the same. |
— |
copy |
Backup config was missing. |
The user attempted to copy or erase the backup config file but no backup config file has been generated. |
copy erase |
Could not load CLI configuration files, can not complete request. |
The .conf files could not be located, which should never occur in the field. |
copy |
Error writing to <URL>. |
The URL specified in the destination could not be written. |
copy |
Error reading from <URL>. |
The URL specified in the source could not be read. |
copy |
Packet-file does not exist. |
The user attempted to copy or erase the packet-file but no packet-file has been captured. |
copy erase |
No downgrade available. |
The user attempted to downgrade a system that has not been upgraded. |
downgrade |
No packet-file available. |
The user attempted to display the file-info or the packet-file but no packet-file exists. |
packet |
Log file exists but an error occurred during read. |
The user was displaying or copying an iplog file that was overwritten. The partial file contents should still be viewable. |
packet |
Another user is currently capturing into the packet-file. Please try again later. |
— |
packet capture |
Another CLI client is currently displaying packets from the interface. |
The user must wait for the other CLI session to terminate display before this will be available. Multiple users may display the command control interface simultaneously. |
packet display |
Log does not exist. |
The user attempted to copy or display an iplog that does not exist. |
copy iplog packet display iplog |
The requested IPLOG is not complete. Please try again after the IPLOG status is 'completed.' |
The user attempted to copy or display an iplog that is not complete. |
copy iplog |
Could not create pipe /usr/cids/idsRoot/tmp/ pipe_cliPacket.<pid>.tmp |
Could not open pipe for sending iplog file. This indicates a space or resource limitation, which should not occur in the field. |
copy iplog |
The log file was overwritten while the copy was in progress. The copied log file may be viewable but is incomplete. |
The iplog was overwritten while it was being copied off the sensor. |
copy iplog |
Could not read license file. |
The license file was copied but cannot be opened. |
copy license-key |
Could not write the temporary license file location used to copy the file off the box. |
Could not open the temporary storage location /usr/cids/idsRoot/tmp/ips.lic. This indicates a space issue, which should not occur in the field. |
copy license-key |
Virtual sensor name does not exist. |
The user attempted to start or stop an iplog on a non-existent virtual sensor. |
iplog |
You do not have permission to terminate the requested CLI session. |
An operator or viewer user attempted to terminate a CLI session belonging to another user. |
clear line |
Invalid CLI ID specified, use the 'show users all' command to view the valid CLI session IDs. |
The user attempted to cancel a CLI session that does not exist. |
clear line |
The maximum allowed CLI sessions are currently open, please try again later. |
Operator or viewer user attempted to log in when the maximum number of CLI sessions were already open. |
initial login |
The maximum allowed CLI sessions are currently open, would you like to terminate one of the open sessions? |
Administrator user attempted to log in when the maximum number of CLI sessions were already open. |
initial login |
Can not communicate with system processes. Please contact your system administrator. |
The CLI cannot contact the applications on the sensor to retrieve start-up information. This is a fatal error that should never happen. The user has to log in to the service account and manually reboot the sensor. |
initial login |
The instance cannot be removed. Instance assigned to virtual sensor name. |
The user attempted to remove a configuration instance that is currently assigned to a virtual sensor. Use the default service command to reset the configuration setting to default. |
no service component instance |
Insufficient disk space to complete request. |
Not enough disk space is available to create a new instance of a configuration file. |
copy instance service component instance |