Cisco IOS XR System Security Command Reference for the Cisco XR 12000 Series Router, Release 4.3.x
Lawful Intercept Commands
Downloads: This chapterpdf (PDF - 1.15 MB) The complete bookPDF (PDF - 3.67 MB) | Feedback

Lawful Intercept Commands

Lawful Intercept Commands

This module describes the Cisco IOS XR software commands used to configure lawful intercept (LI).

For detailed information about keychain management concepts, configuration tasks, and examples, see the Implementing Lawful Intercept inthe Cisco IOS XR Software the Configuration Module .

lawful-intercept disable

To disable the Lawful Intercept (LI) feature, use the lawful-intercept disable command. To re-enable the LI feature, use the no form of this command.

lawful-intercept disable

no lawful-intercept disable

Syntax Description

This command has no keywords or arguments.

Command Default

LI feature is enabled by default only if the LI package is installed.

Command Modes

Global configuration

Command History



Release 3.7.0

This command is introduced.

Release 4.3.2

By default, Lawful Intercept (LI) is not a part of the Cisco IOS XR software. The LI package needs to be installed separately by activating the c12k-li.pie. So this command is available only after installing and activating the c12k-li.pie.

Usage Guidelines

If you disable lawful intercept, all Mediation Devices and associated TAPs are deleted.

To enable this command, you must install and activate the .

Task ID

Task ID



read, write


This example shows how to configure the lawful-intercept disable command:

RP/0/0/CPU0:router(config)# lawful-intercept disable