The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
The following table lists the new features supported in the 48-Port T1/E1 CEM Interface Module Configuration Guide in Cisco IOS XE 17 releases., on Cisco NCS 4201 and Cisco NCS 4202 routers.
Feature | Description |
---|---|
Cisco IOS XE Cupertino 17.8.1 |
|
The router supports the following features for the 48-Port T1/E1 Circuit Emulation (CEM) interface module:
The support for the interface module provides cost-effective delivery of CEM over a packet-based network (MPLS). |
|
Cisco IOS XE Bengaluru 17.5.1 |
|
The show controller tabular command enables you to view the performance monitoring details in tabular form as per GR-820-Core standards. |
|
Cisco IOS XE Bengaluru 17.4.1 |
|
Support for all 0s and 1s BERT patterns on T1 or E1 interfaces. |
The following table lists the new and modified features supported in the 48-Port T1/E1 CEM Interface Module Configuration Guide in Cisco IOS XE 17 releases., on Cisco NCS 4206 and Cisco NCS 4216 routers.
Feature | Description |
---|---|
Cisco IOS XE Bengaluru 17.5.1 |
|
The show controller tabular command enables you to view the performance monitoring details in tabular form as per GR-820-Core standards. |
|
Cisco IOS XE Bengaluru 17.4.1 |
|
Support for all 0s and 1s BERT patterns on T1 or E1 interfaces. |