The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Contents
A - E - F - G - H - I - L - M - N - O - R - S - T
Index
A
AIS 1E
EJECTOR-FLAPS-OPEN 1F
FC-REDUNDANCY-LOST 1FEC-MISM 1FPD-NEED-UPGRADE 1G
GFP-UP-MISMATCH 1H
HI-LASERBIAS 1HI-RXPOWER 1HI-TXPOWER 1HOLDOVER-NOT-READY 1I
IMPROPRMVL 1INSTALL-IN-PROGRESS 1ISSU-IN-PROGRESS 1L
LF 1LO-RXPOWER 1LO-TXPOWER 1LOF 1LOS 1M
MEA 1N
NA Conditions 1O
ODUk-AIS-PM 1ODUk-BDI-PM 1ODUk-BIAE 1ODUk-IAE 1ODUk-LCK-PM 1ODUk-OCI-PM 1ODUk-SD-PM 1ODUk-SF-PM 1ODUk-TIM_PM 1OPUk-CSF 1OPUk-PTIM 1OTN Critical Alarms 1OTN Major Alarms 1OTUk-BDI 1OTUk-IAE 1OTUk-LOM 1OTUk-SD 1OTUk-SF 1R
RDI 1RF 1RP-REDUNDANCY-LOST 1S
SD-L 1SF-L 1SIGLOSS 1T
TCA 1TE-LOS 1TE-PORT-UNAVAILABLE 1TIM 1TIMING-FPGA-SEU 1TIMING-ISOLATED-RACK 1TIMING-LOAD-ERROR 1TIMING-PCI-ERROR 1TIMING-PLL-VAL-ERROR 1