attribute-set xro
To specify an attribute set for LSP diversity for GMPLS UNI, use the attribute-set xro command in MPLS-TE configuration mode. To remove the settings, use the no form of this command.
attribute-set xro attribute-set
no attribute-set xro attribute-set
Syntax Description
attribute-set |
Specifies the attribute set. |
Command Default
No default behavior or values
Command Modes
MPLS-TE configuration
Command History
Release | Modification |
---|---|
Release 4.3.0 |
This command was introduced. |
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator for assistance.
An XRO attribute-set can be specified as part of the path-option, if required. An empty XRO attribute set results in the GMPLS tunnel being signaled with no exclusions, and therefore no XRO.
Task ID
Task ID |
Operations |
---|---|
ouni |
read, write |
Examples
The following example shows how to configure attribute set attr01:
RP/0/RP0/CPU0:router(config)# mpls traffic-eng
RP/0/RP0/CPU0:router(config-mpls-te)# attribute-set xro attr01
RP/0/RP0/CPU0:router(config-te-attribute-set)#