Guest

Cisco ASR 9000 Series Aggregation Services Routers

New and Changed Commands in Cisco IOS XR Software, Release 5.2.x, for Cisco ASR 9000 Series Aggregation Services Routers

  • Viewing Options

  • PDF (1.1 MB)
  • Feedback
New and Changed Commands

New and Changed Commands

This list summarizes the commands which were newly added and changed in Cisco IOS XR Software, Release 5.2.x, and gives you the location where the commands are documented.

To read additional information about Cisco IOS XR Software features, see the Release Notes:

Release Notes

The latest versions of Cisco IOS XR Software documents are available at:

Cisco IOS XR Software Documents

Configuration Guides

Command References

Commands Newly Added and Changed in Release 5.2.x

Command History

Table 1 Commands newly added and changed for Cisco ASR 9000 Series Routers
Command Change Description
Release 5.2.0  
event

The exception event was added for service rollback failure due to multi-action CoA request failure.

encapsulation ambiguous dot1ad

The support for outer VLAN range was added in BNG.

encapsulation ambiguous dot1q

The support for outer VLAN range was added in BNG.

shape average (BNG)

$shape-rate =rate option was added to support QoS shaper parameterization in BNG.

subscriber session limit

The session_limit was made an optional parameter for the no form of this command.

show subscriber session

The output of show subscriber session all username command was modified to display the fields, Username , Interface , State and Subscriber IP Addr , instead of Type , Interface , State and Username

bulk-port-alloc (NAT44)

The minimum size for bulk port allocation was reduced to 8.

nat-mode

This command was introduced.

show cgn nat44 inside-vrf counters

Additional counters were introduced.

show cgn nat44 static-map

This command was introduced.

static-mapping-file direction

This command was introduced.

lanmode on

This command was introduced.

report sd-ber

This command was introduced.

report sf-ber disable

This command was introduced.

threshold sd-ber

This command was introduced.

threshold sf-ber

This command was introduced.

show dhcp ipv4 client

This command was introduced.

show dhcp ipv4 client statistics

This command was introduced.

clear dhcp ipv4 client

This command was introduced.

clear dhcp ipv4 client statistics

This command was introduced.

show tech support dhcp ipv4 client

This command was introduced.

tunnel vrf

This command was introduced.

interface nve

This command was introduced.

member

This command was introduced.

member vni

This command was introduced.

overlay-encapsulation

This command was introduced.

show nve interface

This command was introduced.

show nve peers

This command was introduced.

show nve vni

This command was introduced.

source-interface loopback

This command was introduced.

match dscp

The min-value and max-value variables were added.

match protocol

The min-value and max-value variables were added.

policy-map

The pbr keyword was added.

bidirectional

This command was introduced.

show mpls traffic-eng tunnels bidirectional-associated

This command was introduced.

show mfib hardware route logical

This command was changed from show mfib hardware route internal to show mfib hardware route logical.

options

This command was introduced.

address-family (BGP)

The following keywords were added: flowspec, vpnv4 multicast

bgp multipath as-path

This command was introduced.

next-hop-unchanged

The multipath keyword was added.

show bgp

The command output was modified to include the following: Flowspec configuration information, VPNv4 multicast prefixes

class-map type traffic (BGP-flowspec)

This command was introduced.

class type traffic

This command was introduced.

drop (BGP-flowspec)

This command was introduced.

flowspec

This command was introduced.

flowspec disable

This command was introduced.

local-install

This command was introduced.

match destination-address

This command was introduced.

match destination-port

The min-value and max-value variables were added.

match fragment-type

This command was introduced.

match icmp code

This command was introduced.

match icmp type

This command was introduced.

match packet length

This command was introduced.

match source-address

This command was introduced.

match source-port

The min-value and max-value variables were added.

match tcp flag

This command was introduced.

redirect (BGP Flowspec)

This command was introduced.

service-policy

This command was introduced.

show flowspec

This command was introduced.

show pbr internal

This command was introduced.

show pbr trace

This command was introduced.

bfd bundle per-member mode

This command was introduced.

bfd encap mode

This command was introduced.

bfd fast-detect (EIGRP)

This command was introduced.

bfd minimum-interval (EIGRP)

This command was introduced.

bfd multiplier (EIGRP)

This command was introduced.

show eigrp interfaces

The command output was modified to display BFD information.

show eigrp neighbors

The command output was modified to display BFD information.

prefix-sid index

This command was introduced.

segment-routing

This command was introduced.

show isis database

The output of this command when verbose keyword is used is modified to display adjacency prefix segment IDs.

show isis route

The output of this command when detail keyword is used is modified to display prefix segment ID index values.

if route-aggregated

This command was introduced.

remove as-path private-as

This command was introduced.

rpl set-exit-as-abort

This command was introduced.

set administrative-distance

This command was introduced.

show openflow hardware capabilities

This command was introduced.

show openflow interface switch

This command was introduced.

show policy-map transient targets summary

This command was introduced.

show policy-map transient list type pbr

This command was introduced.

show policy-map transient type pbr pmap-name

This command was introduced.

show table-cap table-type

This command was introduced.

license smart enable

This command was introduced.

show license all

This command was introduced.

show license certificate

This command was introduced.

show license entitlement

This command was introduced.

show license features

This command was introduced.

show license ha

This command was introduced.

show license pool

This command was introduced.

show license register-status

This command was introduced.

show license scheduler

This command was introduced.

show license status

This command was introduced.

show license udi

This command was introduced.

show license version

This command was introduced.

hw-module cts-enable all

This command was introduced.

show controllers NP configSram

This command was introduced.

crypto ca trustpool import url

This command was introduced.

crypto ca trustpool policy

This command was introduced.

show crypto ca trustpool policy

This command was introduced.