Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Configuration Guide, Release 5.1.x
New and Changed Information in Release 5.1.x
Downloads: This chapterpdf (PDF - 456.0KB) The complete bookPDF (PDF - 9.31MB) | Feedback

Table of Contents

New and Changed Information in Release 5.1.x

New and Changed Information in Release 5.1.x

This table summarizes the new and changed feature information for the Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Configuration Guide, and tells you where they are documented.

Table 2 New and Changed Features

Feature
Description
Introduced/Changed in Release
Where Documented

Mixed Speed Bundles

This feature was introduced.

Release 5.1.2

Configuring Link Bundling on the
Cisco ASR 9000 Series Router

Ethernet CFM Down MEP

This feature was introduced.

Release 5.1.2

Configuring Ethernet OAM on the
Cisco ASR 9000 Series Router

Advanced Satellite nV Topologies

This feature was introduced.

Release 5.1.1

Configuring the Satellite Network Virtualization (nV) System on the Cisco ASR 9000 Series Router

Ethernet Data Plane Loopback

This feature was introduced.

Release 5.1.0

Configuring Ethernet OAM on the Cisco ASR 9000 Series Router

Refer Ethernet OAM Commands on the Cisco ASR 9000 Series Router module in Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference for information on the commands used for configuring Ethernet Data Plane Loopback.

Sampled Traffic Mirroring

This feature was introduced.

Release 5.1.0

Configuring Traffic Mirroring on the Cisco ASR 9000 Series Router

Refer Traffic Mirroring Commands on the Cisco ASR 9000 Series Router module in Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference for information on traffic mirroring commands.