Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Configuration Guide, Release 5.1.x
Downloads: This chapterpdf (PDF - 707.0 KB) The complete bookPDF (PDF - 9.49 MB) | Feedback



action capabilities-conflict command HC-137

action discovery-timeout command HC-137

action uni-directional link-fault command HC-138

aggregate none command HC-203

ais-shut command HC-506

aps group command HC-428, HC-504

aps submode

channel command HC-428, HC-504

interface loopback command HC-504

See aps group command

atm address-registration command HC-59

atm ilmi-config disable command HC-61

atm ilmi-keepalive command HC-59

ATM interface

address registration and callback functions HC-59

ATM overview HC-14

attaching a vc-class HC-55, HC-56, HC-58

bringing up HC-23, HC-71


IP address and subnet mask HC-37


OAM F5 loopback HC-52

OAM management HC-52

optional parameters HC-25, HC-71


traffic shaping HC-34, HC-53

VC class HC-51, HC-74

VP tunnel HC-33, HC-36


interface HC-28


subinterface HC-27, HC-28

VP tunnel HC-34

F4 OAM overview HC-16


disabling HC-60, HC-61

enabling HC-58, HC-59

overview HC-16

OAM packets HC-34

prerequisites HC-14

vc-class, attaching HC-54

VC class-mapping overview HC-15


connectivity HC-38

ILMI configuration HC-60, HC-62

VP tunnel

displaying HC-35, HC-38

overview HC-16


bert pattern command HC-545, HC-547

buckets archive command HC-203

bundle command HC-721

Bundle-Ether command HC-306

bundle id command HC-306, HC-311


cablelength command HC-520, HC-526, HC-533

channel command HC-428, HC-504

channel-group command HC-537, HC-679, HC-684, HC-720

Channelized ATM HC-62

Channelized SONET, configuring HC-415, HC-420, HC-461, HC-464, HC-781, HC-785, HC-826


defined HC-586

enabling HC-705

password, configuring HC-710

ppp HC-621, HC-696

refusing HC-715

class-int command HC-55

class-vc command HC-58

clear channel HC-75

clear channel ATM HC-64, HC-75

clock source command HC-520, HC-521

controller e1 command HC-547

controller mgmtmultilink command HC-720

crc command HC-585, HC-625


default settings

flow control

Management Ethernet HC-83

mac-address (Management Ethernet) HC-83

speed (Management Ethernet) HC-82

delay trigger command HC-500

duplex command HC-86


E1 controller

default configuration values HC-520, HC-521

frame type HC-521, HC-540

E3 controller

cable length, setting HC-520

clock source, default value HC-520


clear channel HC-523

clear channel serial HC-524

national reserved bits HC-521

E3 configuration mode HC-524

frame type HC-520, HC-527

encap command (Frame Relay) HC-665, HC-673

encapsulation command HC-52, HC-585, HC-625

encapsulation frame relay command HC-665

encapsulation frame-relay command HC-664

Ethernet interface


MAC accounting HC-98, HC-117

MAC address HC-98

configuring flow control HC-98

configuring MAC accounting HC-98

configuring the IP address and subnet mask HC-114

configuring the MAC address HC-98, HC-114

configuring the MTU HC-98, HC-114

default settings

flow control HC-98

MAC accounting HC-98

MAC address HC-98

mtu HC-98


Ethernet interfaces HC-115

MAC accounting statistics HC-117

displaying Ethernet interfaces HC-115

enabling flow-control HC-114

enabling Layer 2 transport mode HC-118

Gigabit Ethernet standards HC-99

IEEE 802.3ab 1000BASE-T Gigabit Ethernet HC-100

IEEE 802.3ae 10 Gbps Ethernet HC-100

IEEE 802.3 Physical Ethernet Infrastructure HC-100

IEEE 802.3z 1000 Mbps Gigabit Ethernet HC-100

Layer 2 VPN

overview HC-98

VLAN support HC-752

using the flow-control command HC-98, HC-114

using the ipv4 address command HC-114

using the l2transport command HC-118

using the mac-accounting command HC-98

using the mac address command HC-98, HC-114

using the mtu command HC-98, HC-114

using the negotiation auto command HC-115

using the no shutdown command HC-115


802.1Q frames tagging HC-750

configuring a Layer 2 VPN attachment circuit HC-755

configuring subinterfaces HC-753

displaying VLAN interfaces HC-755, HC-759

MTU inheritance HC-751

native VLAN description HC-751

overview HC-750

removing a subinterface HC-757

subinterface overview HC-751

using the show vlan interfaces command HC-755, HC-759


f4oam disable command HC-34

failover HC-307

Fast Ethernet interface

auto-negotiation HC-98


duplex operation HC-98

MAC accounting HC-98


default settings

auto-negotiation HC-98

duplex operation HC-98

interface speed HC-98

MAC accounting HC-98

mtu HC-98

fdl HC-521

fdl ansi HC-521

fdl command HC-521, HC-536

flow-control command HC-98, HC-114

Frame Relay

configuration examples HC-687


PVC encapsulation HC-673

support type HC-665, HC-673

default configuration, modifying HC-671, HC-672

default settings HC-665


configuring HC-665, HC-673

disabling HC-665, HC-674, HC-675

enabling HC-665

overview HC-665

polling HC-666, HC-667

overview HC-664

POS interfaces HC-583

prerequisites HC-664

PVCs HC-665

serial interfaces HC-623

frame-relay intf-type command HC-665, HC-673

frame-relay intf-type dce command HC-666

frame-relay intf-type dte command HC-666

frame-relay lmi command HC-665

frame-relay lmi disable command HC-675

frame-relay lmi-t391dte command HC-667

frame-relay lmi-type command HC-665, HC-673

framing command HC-520, HC-521




IEEE 802.3ad standard HC-295

if preconfiguration submode, ipv4 address command HC-9

if submode

bundle id command HC-311, HC-321

controller sonet command HC-506

duplex command HC-86

interface command HC-505

ipv4 address command HC-84, HC-399, HC-680

keepalive command HC-505, HC-723

no shutdown command HC-84, HC-311

pos crc command HC-505

See interface preconfigure command

speed command HC-87

ILMI, on ATM interfaces HC-58

interface Bundle-Ether command HC-309, HC-316

interface command HC-28

for Ethernet interfaces HC-756

for VLAN subinterfaces HC-754

forVLAN subinterfaces HC-756

loopback HC-399

null HC-400

interface loopback command HC-504

interface POS command HC-321

interface preconfigure command HC-9


Link Bundling HC-289

configuring HC-308

link failover HC-307

prerequisites HC-291

invert command HC-633

ipv4 address command HC-9, HC-28, HC-114, HC-306, HC-754

Fast Ethernet HC-84

loopback HC-399


keepalive command HC-585, HC-600

keepalive timer

description HC-586


POS link state HC-586


l2transport command HC-118


See Layer 2 VPN HC-98

See Layer 2 VPN HC-98

Layer 2 VPN

enabling Layer 2 transport mode HC-118

overview HC-98

using the l2transport command HC-118

LCP (Link Control Protocol) HC-585, HC-620

Link Aggregation Control Protocol HC-293, HC-294

link failover HC-307

LMI HC-665, HC-674, HC-675

lmi-n391dte command HC-667

lmi-n392dce command HC-666

lmi-n392dte command HC-667

lmi-n393dce command HC-666

lmi-n393dte command HC-667

lmi-t392dce command HC-666

Local Management Interface (LMI) HC-624


naming convention HC-395

loopback, naming convention HC-395

loopback command HC-500


mac accounting command HC-117

mac-accounting command HC-98

mac address command HC-98, HC-114

management ethernet interface, configuring HC-82

mdl string command HC-533

mdl transmit command HC-521, HC-533

mip auto-create command HC-142

mode command HC-524

MS-CHAP authentication

disabling HC-716

enabling HC-705, HC-706

password, configuring HC-712

ppp HC-586, HC-696, HC-712, HC-717

viewing HC-707

mtu command HC-98, HC-114, HC-585, HC-625

Multi-Chassis Link Aggregation

Access Network Redundancy Model HC-297

Core Network Redundancy Model HC-299

multilink command HC-725

multilink fragment delay command HC-722

multilink fragment-size command HC-722

multilink Frame Relay bundle interface HC-680

multilink interleave command HC-725

Multiprotocol Label Switching control processor (MPLSCP) HC-586, HC-621


naming conventions

loopback HC-395

null interface HC-395

preconfigure HC-7

national bits command HC-521, HC-527, HC-540

negotiation auto command HC-98, HC-115

Network Control Protocols (NCPs) HC-586, HC-620

no interface command HC-758

Nonstop forwarding HC-307

no shutdown command

(warning) HC-7

Fast Ethernet HC-84

for Ethernet interfaces HC-115

null interface

configuring HC-396

displaying HC-397

naming convention HC-395


oam ais-rdi command HC-52

oam-pvc manage command HC-52

oam retry command HC-52

overhead command HC-500


PAP authentication

defined HC-696

disabling HC-713

enabling HC-705, HC-706, HC-708, HC-709

ppp HC-586, HC-708

refusing HC-714

viewing HC-707

path command HC-501, HC-508

path scrambling command HC-506

ping command HC-38

ping ethernet cfm command HC-201

Point-to-Point protocol


POS (Packet-over-SONET)

See POS interface

pos crc command HC-422

POS interface

bringing up HC-589


CRC value HC-422, HC-585, HC-593

encapsulation type HC-585

interface encapsulation HC-422, HC-593, HC-723

keepalive timer HC-585, HC-599, HC-600, HC-723

MTU HC-422, HC-585, HC-593, HC-607

optional parameters HC-592

PPP authentication HC-586

default settings

CRC HC-585

encapsulation HC-585

keepalive HC-585

mtu HC-585

Frame Relay encapsulation HC-583

HDLC encapsulation


overview HC-585

interface configuration mode

interface command HC-723

interface multilink command HC-722, HC-725

interface pos command HC-422, HC-590, HC-593

PPP encapsulation

description HC-583

overview HC-585

subinterfaces, creating with PVCs HC-594



authentication HC-696

enabling HC-705, HC-706

password, configuring HC-710, HC-711

refusing HC-715

viewing HC-707

default configuration, modfying HC-702, HC-703

interfaces, displaying HC-705


disabling HC-716, HC-717

enabling HC-706

authenticaion HC-705

password, configuring HC-712

ppp HC-621, HC-696

viewing HC-707

overview HC-695


authentication HC-621, HC-708

disabling HC-713

enabling HC-705, HC-706, HC-708, HC-709

refusing HC-714

viewing HC-707

POS configuration example HC-735

POS interface HC-583, HC-585

prerequisites HC-694

serial configuration example HC-735

serial interface HC-617, HC-620

ppp authentication command HC-586, HC-621, HC-695, HC-706

ppp chap password command HC-711

ppp chap refuse command HC-715

ppp max-bad-auth command HC-703

ppp max-configure command HC-704

ppp max-failure command HC-704

ppp max-terminate command HC-704

ppp ms-chap password command HC-712

ppp ms-chap refuse command HC-717

ppp multilink minimum-active links command HC-725

ppp pap refuse command HC-714

ppp pap sent-username command HC-708, HC-709

ppp timeout authentication command HC-704

ppp timeout retry command HC-704


advantages HC-7

directory HC-5

naming conventions HC-7

restriction to physical interface HC-5


ATM interface HC-29

ATM subinterface HC-27, HC-57

POS subinterface HC-594, HC-596

VP tunnel HC-36

pvc command HC-28


RP, preconfiguration directory HC-5


scramble command HC-633

serial interface


CRC HC-633

interface encapsulation HC-633

IP address and subnet mask HC-630

keepalive timer HC-642

transmit delay HC-633

data stream, inverting HC-633

default settings

CRC HC-625

encapsulation HC-625

keepalive HC-625

mtu HC-625

link state HC-620, HC-621, HC-622

payload scrambling, enabling HC-633

PPP encapsulation HC-620

prerequisites HC-615

shape command HC-34

show aps command HC-429, HC-507

show atm ilmi-status command HC-60, HC-62

show atm vp-tunnel command HC-38

show atm vp-tunnel interface atm command HC-35

show bundle Bundle-Ether command HC-312

show bundle Bundle-POS command HC-322

show controllers command HC-525

show controller sonet command HC-502

show frame-relay lmi command HC-666

show interfaces command HC-113, HC-657

for Ethernet interfaces HC-115, HC-119

show lacp bundle Bundle-Ether command HC-312

show mac accounting command HC-117

show ppp interfaces command HC-705, HC-707

show version command HC-113

show vlan command HC-755, HC-759

SLARP (Serial Line Address Resolution Protocol) HC-587, HC-620, HC-623

SONET (Synchronous Optical Network)

APS HC-502

description HC-495

fast reroute (FFR) HC-507

SONET APS (SONET Automatic Protection Switching) HC-502

SONET controller

configuring HC-499

frame type HC-500

sonet submode

ais-shut command HC-506

clock source command HC-500, HC-506

delay trigger command HC-500, HC-508

framing command HC-500

loopback command HC-500

overhead command HC-500

path command HC-501, HC-508

path scrambling command HC-506

See controller sonet command


speed command HC-98

management ethernet HC-87

switched port analyzer HR-365


T1 controller

ANSI T1.403 or AT&T TR54016 performance reports HC-521, HC-536

BERT, configuring HC-547

clock source HC-521, HC-536

default configuration values HC-520, HC-521

DS0 timeslots, associating HC-537, HC-679, HC-684, HC-720

frame type HC-521, HC-536

T1 channel group, creating HC-537, HC-679, HC-684, HC-720

T1 configuration mode HC-536, HC-550, HC-678, HC-684, HC-720

yellow alarms HC-521

T3 controller

cable length, setting HC-520

clock source

configuring HC-526, HC-533, HC-719

default value HC-520

configuring HC-528


channelized T3 controller HC-530

clear channel E3 controller HC-524

clear channel T3 controller HC-528

FRF.12 end-to-end fragmentation HC-683

MDL messages HC-521

multilink Frame Relay bundle interfaces HC-678

frame type HC-520, HC-533


default E3 controller HC-526

default T3 controller HC-532

timeslots command HC-537, HC-679, HC-684, HC-720

traffic filtering HC-396

transmit-delay command HC-633

transparent switch over HC-82


uni-directional link-fault detection command HC-138



ATM interfaces HC-51, HC-54


ATM subinterfaces HC-55

configuring HC-74

creating HC-74

vc-class command HC-51

virtual interface

active/standby RPs HC-397

and active/standby RPs HC-8, HC-397

failover HC-395

naming convention HC-395

null interface definition HC-396

switchover HC-395


802.1Q frames tagging HC-750

configuring an IP address and subnet mask HC-754

configuring subinterfaces HC-753

displaying VLAN interfaces HC-755, HC-759

Layer 2 VPN

configuring an attachment circuit HC-755

Layer 2 VPN support HC-752

MTU inheritance HC-751

native VLAN description HC-751

overview HC-750

removing a VLAN subinterface HC-757

subinterface overview HC-751

using the ipv4 address command HC-754

using the no interfawn command HC-758

using the show vlan interfaces command HC-755, HC-759

VP tunnel

configuring HC-33, HC-64

creating HC-33

example HC-75

vp-tunnel command HC-34


yellow command HC-521, HC-536