clear controller fabric
To clear the fabric ASIC statistics for the specified fabric plane or all planes, use the clear controller fabric command in EXEC mode or Admin EXEC mode.
clear controller fabric {fia | crossbar-counters} location node-id
Syntax Description
fia |
clears fabric counter details. |
||
crossbar-counters |
clears crossbar counters for a slot. |
||
location node-id |
Node ID.The node-id argument is expressed in the rack/slot/module notation.
|
Command Default
No default behavior or values.
Command Modes
EXEC mode
Admin EXEC mode
Command History
Release |
Modification |
---|---|
Release 3.7.2 |
This command was introduced. |
Usage Guidelines
No specific guidelines impact the use of this command.
Task ID
Task ID |
Operations |
---|---|
drivers |
read, write |
Examples
The following example shows how to use the clear controller fabric command:
RP/0/RSP0/CPU0:router# clear controllers fabric fia location cpu/1/0
RP/0/RSP0/CPU0:router# clear controller fabric crossbar-counters spine 0