The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This preface describes the objectives and organization of this document and explains how to find additional information on related products and services. This preface contains the following sections:
This document describes the Cisco ASR 1000 Series Fixed Ethernet Line Cards that are supported on the Cisco ASR 1000 Series Aggregation Services Routers. This document also describes how to install the Cisco ASR 1000 Series Fixed Ethernet Line Cards and how to troubleshoot the installation.
Note Unless otherwise noted in this document, the term Cisco ASR 1000 Series Fixed Ethernet Line Cards represents both the ASR1000-2T+20X1GE line card and the ASR1000-6TGE line card.
The Document Revision History records changes made to this document. The table shows the Cisco IOS XE software release number and document revision number pertaining to the change, the date of the change, and a brief summary of the change.
This document contains the following chapters:
|
|
|
---|---|---|
Overview of the Cisco ASR 1000 Series Fixed Ethernet Line Card |
Provides an introduction to the Cisco ASR 1000 Series Fixed Ethernet Line Cards. Also provides a compatibility summary for the Cisco ASR 1000 Series Fixed Ethernet Line Cards, characteristics of the cards, and overview. |
|
Preparing to Install the Cisco ASR 1000 Series Fixed Ethernet Line Cards |
Describes the required tools, equipment, and safety guidelines for installing the Cisco ASR 1000 Series Fixed Ethernet Line Cards. |
|
Installing and Removing the Cisco ASR 1000 Series Fixed Ethernet Line Cards |
Describes the procedures for installing and removing the Cisco ASR 1000 Series Fixed Ethernet Line Cards on a Cisco ASR 1000 Series Aggregation Services Router. |
|
Describes the procedures for installing and removing the small form-factor pluggables (SFP and XFP modules) on the Cisco ASR 1000 Series Fixed Ethernet Line Cards. |
||
Provides information about troubleshooting the installation of the Cisco ASR 1000 Series Fixed Ethernet Line Cards. It also describes the debug commands and provides packing instructions. |
This section refers you to other documentation that might be useful as you configure your Cisco ASR 1000 Series Ethernet Line Card.
http://www.cisco.com/en/US/products/ps9587/products_installation_and_configuration_guides_list.html
http://www.cisco.com/en/US/products/ps9587/products_feature_guides_list.html
http://www.cisco.com/en/US/products/ps9587/prod_command_reference_list.html
Some of the other publications pertaining to the Cisco ASR 1000 Series Aggregation Services Routers might be useful to you as you configure your Cisco ASR 1000 Series Aggregation Services Router:
– Cisco ASR 1013 Router Quick Start Guide
http://www.cisco.com/en/US/partner/docs/routers/asr1000/quick/start/guide/asr1_qs13.html
– Cisco ASR 1004 Router Quick Start Guide
http://www.cisco.com/en/US/partner/docs/routers/asr1000/quick/start/guide/asr1_qs4.html
– Cisco ASR 1006 Router Quick Start Guide
http://www.cisco.com/en/US/partner/docs/routers/asr1000/quick/start/guide/asr1_qs6.html
– Cisco IOS Quality of Service Solutions Command Reference guide at the URL: http://www.cisco.com/en/US/docs/ios/qos/command/reference/qos_book.html
Several other publications are also related to the Cisco ASR 1000 Series Aggregation Services Routers. For a complete reference of related documentation, see the Cisco ASR 1000 Series Aggregation Services Router Documentation Roadmap located at the following URL:
http://www.cisco.com/en/US/products/ps9343/products_documentation_roadmaps_list.html
Your router and the Cisco IOS software running on it contain extensive features. You can find documentation for Cisco products at the following URL:
Within the guide, the term router is generally used to refer to a variety of Cisco products (for example, routers, access servers, and switches). Routers, access servers, and other networking devices that support Cisco IOS software are shown interchangeably within examples. These products are used only for illustrative purposes, that is, an example that shows one product does not necessarily indicate that other products are not supported.
This documentation uses the following conventions:
Command syntax descriptions use the following conventions:
Nested sets of square brackets or braces indicate optional or required choices within optional or required elements. For example:
|
|
---|---|
Braces and a vertical line within square brackets indicate a required choice within an optional element. |
Examples use the following conventions:
The following conventions are used to attract the attention of the reader:
Note Means reader take note. Notes contain helpful suggestions or references to materials that may not be contained in this manual.
Tip Means the following information will help you solve a problem. The tips information might not be troubleshooting or even an action, but could be useful information, similar to a Timesaver.
For information on obtaining documentation, using the Cisco Bug Search Tool (BST), submitting a service request, and gathering additional information, see What’s New in Cisco Product Documentation at: http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html.
Subscribe to What’s New in Cisco Product Documentation, which lists all new and revised Cisco technical documentation, as an RSS feed and deliver content directly to your desktop using a reader application. The RSS feeds are a free service.