The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This chapter contains these sections:
■Uninstalling Cisco CP Express Admin View
■Upgrading Cisco CP Express Admin View to a Later Version
■Retrieving Lost or Misplaced Files
To uninstall the Cisco CP Express Admin View from the flash memory of the router, perform these steps:
1. On the router, navigate to the directory in which the Cisco CP Express Admin View files are located using this command:
2. Use the delete command to remove all Cisco CP Express Admin View files and folders from the router’s flash memory.
NOTE : Ensure that you delete the files extracted from the ccpexpressAdmin_3_4_en.tar file.
When a new version of the Cisco CP Express Admin View is available, perform these steps to upgrade to the new version:
1. Follow the steps detailed in the Uninstalling Cisco CP Express Admin View to uninstall an existing version of the Cisco CP Express Admin View.
2. Follow the steps detailed in the Downloading Cisco CP Express Admin View to download the Cisco CP Express Admin View installation files.
3. Follow the steps detailed in the Installing Cisco CP Express Admin View to install the Cisco CP Express Admin View.
CAUTION : Exercise care while handling the Cisco CP Express Admin View files.
If you accidentally delete any of these files, perform these steps:
1. From the router’s flash memory, delete the files you extracted from the cisco-config-pro-exp-admin-k9-3_4-en.zip file. For more information, see the Uninstalling Cisco CP Express Admin View.
2. Follow the procedure detailed in Downloading Cisco CP Express Admin View to download the files.
3. Copy the files to the router’s flash memory, and follow the procedure detailed in the Installing Cisco CP Express Admin View to extract and install the Admin View files.