Cisco 12008 Gigabit Switch Router Installation and Configuration Guide
Unpacking and Repacking the Cisco 12008
Downloads: This chapterpdf (PDF - 35.0KB) The complete bookPDF (PDF - 5.95MB) | Feedback

Unpacking and Repacking the Cisco 12008

Table Of Contents

Unpacking and Repacking the Cisco 12008

Cisco 12008 Packaging Materials

Unpacking/Packing Tools


Unpacking and Repacking the Cisco 12008


This appendix presents information about the shipping container for the Cisco 12008.

The shipping container, which includes a shipping pallet and an accessories box, has the following specifications:

Width—25.3 inches (64.3 cm)

Length—37.7 inches (95.8 cm)

Height—31.8-inches (80.8 cm)

Weight—approximately 44 lb (20 kg)

It is recommended that you save the original shipping container for the router should it become necessary at some later time to move the router to another location.

If your original shipping container has been damaged or discarded, you must order a replacement system packaging kit (order number PKG-GSR8=) in order to safely ship the router to another location.

Cisco 12008 Packaging Materials

The packaging materials for the Cisco 12008 consist of the following items:

Cardboard box

Cardboard sleeve

Foam top cap

Accessories box

Anchors (4)—two on each side panel of the router

Shipping pallet

The cardboard box slides over the cardboard sleeve, which fits snugly over the shipping pallet, as indicated in .

Figure A-1 Components of the Cisco 12008 Packaging System

Unpacking/Packing Tools

For visual guidance in unpacking or repacking the Cisco 12008, refer to .


Caution   
To prevent damage, never attempt to lift or tilt the Cisco 12008 using the handles on the power supplies. These handles are not designed to support the weight of the router

You need the items in to unpack or pack the Cisco 12008.

Table A-1 Cisco 12008 System Packaging Tools

Tool
Unpacking
Packing
Purpose

1/4-inch flat-blade screwdriver

X

X

To remove the anchors from the Cisco 12008 side panels

Wire cutters

X

 

To cut the packing straps

ESD-preventive wrist strap

X

X

To prevent ESD damage

Antistatic mat or bag

X

X

To protect boards

Packing straps or carton sealing tape

 

X

To seal box for shipping