Guest

Cisco ONS 15454 Series Multiservice Provisioning Platforms

Installing the ONS 15454 SDH Fiber Guides

  • Viewing Options

  • PDF (245.2 KB)
  • Feedback
Installing the ONS 15454 SDH Fiber Guides

Table Of Contents

Installing the ONS 15454 SDH Fiber Guides

Fiber Guide Kit

Install the Fiber Guides

Related Documentation

Obtaining Documentation and Submitting a Service Request


Installing the ONS 15454 SDH Fiber Guides


Product Name: 15454E-FGD-KIT=

This document provides installation procedures for installing the ONS 15454 SDH Fiber Guides, to allow the shelf assembly to be installed in a 19 in.IEC rack (IEC-297-1), or 19/23 in. ASNI rack (forward-mount), and an ETSI rack, as defined in ETS 300 119-1[2,3,4]. This Fiber Guide kit provides guides to facilitate forward-mounting (38 mm from front) the ONS 15454 SDH shelf assembly. Use this document in conjunction with the Cisco ONS 15454 SDH Procedure Guide.

This document contains the following sections:

"Fiber Guide Kit" section

"Install the Fiber Guides" section

"Fiber Guide Location" section

"Obtaining Documentation and Submitting a Service Request" section

This document contains the following procedures:

"Install the Fiber Guides" procedure

Fiber Guide Kit

The Fiber Guide kit for the ONS 15454 SDH shelf includes the following items.

Fiber Guides (2, left and right mount)

Pan Head M3.0 x 12mm mounting screws (6)

Install the Fiber Guides


Step 1 Verify the type of fiber guides installed on your shelf assembly. The guides provided in this kit are intended to allow you to forward mount the shelf in the following racks.

19in racks as defined in IEC 297-1(2)

19 in. or 23 in. ASNI racks as defined in ETS 300 119-1 (2,3,4)

19 in. ETSI racks as defined in ETS 300 119-1 (2,3,4)

Step 2 Remove the existing guides, if required. The guides are secured with three screws.

Step 3 Align the fiber guide screw holes against the shelf assembly screw holes. "Fiber Guide Location" section gives the location on the shelf assembly.

Step 4 Insert the screws (3 places) and tighten.

Step 5 Repeat for the other side of the assembly.


Figure 1 Fiber Guide Location

Refer to Cisco ONS 15454 SDH Procedure Guide for procedures to install the shelf assembly in a rack.

Related Documentation

DOC-7815258= Cisco ONS 15454 SDH Procedure Guide

DOC-7815260= Cisco ONS 15454 SDH Troubleshooting Guide

DOC-7815259= Cisco ONS 15454 SDH Reference Manual

Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

Subscribe to the What's New in Cisco Product Documentation as an RSS feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service. Cisco currently supports RSS Version 2.0.