Guest

Cisco ONS 15454 Series Multiservice Provisioning Platforms

Release Notes for Cisco ONS 15454 SDH, Release 9.1

  • Viewing Options

  • PDF (489.4 KB)
  • Feedback
Release Notes for Cisco ONS 15454 SDH Release 9.1

Table Of Contents

Release Notes for Cisco ONS 15454 SDH
Release 9.1

Contents

Changes to the Release Notes

Using the Bug ToolKit

Search Bugs

Export to Spreadsheet

New Features and Functionality

Common Hardware

40-SMR1-C and 40-SMR2-C Cards

OPT-RAMP-CE Card

TDC-CC and TDC-FC Cards

Tunable SFPs and XFPs

TXP_MR_10EX_C, MXP_2.5G_10EX_C, and MXP_MR_10DMEX_C Cards

New Software Features and Functionality

10G Ethernet LAN to WAN Conversion

ADM-10G Card Enhancement

Automatic Node Setup Enhancements

Backup NTP/SNTP Server

Booster and OSC-CSM Enhancements

Cisco CRS-1 Router Configuration

Gigabit Ethernet Xponder Card Enhancements

Network Functional View

Onboard Failure Logging

Payload Enhancements on TXP_MR_2.5G and TXPP_MR_2.5G Cards

Photonic Path Trace

Protection Switching Module Standalone

Shared Risk Link Groups

Shelf Voltage and Temperature

TL1

TL1 Command Changes

TL1 ENUM Changes

Related Documentation

Release-Specific Documents

Platform-Specific Documents

Obtaining Documentation and Submitting a Service Request


Release Notes for Cisco ONS 15454 SDH
Release 9.1


Revised: October 2009, OL-18465-01

Release notes contain the new features and enhancements for the Cisco ONS 15454 SDH platform. For detailed information regarding features, capabilities, hardware, and software introduced with this release, refer to the "Release 9.1" version of the Cisco ONS 15454 Procedure Guide; Cisco ONS 15454 Reference Manual; Cisco ONS 15454 Troubleshooting Guide; and Cisco ONS 15454 SONET TL1 Command Guide. For the latest version of the Release Notes for Cisco ONS 15454 Release 9.1, visit the following URL:

http://www.cisco.com/en/US/products/hw/optical/ps2006/prod_release_notes_list.html

Cisco also provides Bug Toolkit, a web resource for tracking defects. To access Bug Toolkit, visit the following URL:

http://tools.cisco.com/Support/BugToolKit/action.do?hdnAction=searchBugs

Contents

Changes to the Release Notes

Using the Bug ToolKit

New Features and Functionality

Related Documentation

Obtaining Documentation and Submitting a Service Request

Changes to the Release Notes

This section documents supplemental changes that have been added to the Release Notes for Cisco ONS 15454 SDH Release 9.1 since the production of the Cisco ONS 15454 SDH System Software CD for Release 9.1.

Using the Bug ToolKit

In Cisco ONS 15454 SDH Software Release 9.1 and later, use the Bug ToolKit to view the list of outstanding and resolved bugs in a release. This section explains how to use the Bug ToolKit.

Search Bugs

This section explains how to use the Bug ToolKit to search for a specific bug or to search for all the bugs in a specified release.


Step 1 Go to http://tools.cisco.com/Support/BugToolKit/action.do?hdnAction=searchBugs.

You will be prompted to log into Cisco.com. After you login, the Bug Toolkit page opens.

Step 2 Click Launch Bug Toolkit.

Step 3 To search for a specific bug, enter the bug ID in the Search for Bug ID field and click Go in the Search Bugs tab.

To search for all the bugs in a specified release, enter the following search criteria in the Search Bugs tab:

Select Product Category—Select Optical Networking.

Select Products—Select Cisco ONS 15400 Series from the list.

Software Version—Select 9.10 to view the list of outstanding and resolved bugs in Cisco ONS 15454 SDH Software Release 9.1.

Search for Keyword(s)—Separate search phrases with boolean expressions (AND, NOT, OR) to search within the bug title and details.

Advanced Options—You can either perform a search using the default search criteria or define custom criteria for an advanced search. To customize the advanced search, select Use custom settings for severity, status, and others and provide the following information:

Severity—Select the severity level.

Status—Select Open, Fixed, or Terminated.

Select Open to view all the open bugs. To filter the open bugs, clear the Open check box and select the appropriate sub-options that appear below the Open check box. The sub-options are New, Held, More, Open, Waiting, Assigned, Forwarded, Postponed, Submitted, and Information Required. For example, if you want to view only new bugs in Cisco ONS 15454 SDH Software Release 9.1, only select New.

Select Fixed to view fixed bugs. To filter fixed bugs, clear the Fixed check box and select the appropriate sub-options that appear below the fixed check box. The sub-options are Resolved or Verified.

Select Terminated to view terminated bugs. To filter terminated bugs, clear the Terminated check box and select the appropriate sub-options that appear below the terminated check box. The sub-options are Closed, Junked, and Unreproducible. Select multiple options as required.

Advanced—Select the Show only bugs containing bug details check box to view only those bugs that contain detailed information, such as symptoms and workarounds.

Modified Date—Select this option if you want filter bugs based on the date on which the bugs were last modified.

Results Displayed Per Page—Select the appropriate option from the list to restrict the number of results that appear per page.

Click Search. The Bug Toolkit displays the list of bugs based on the specified search criteria.

Export to Spreadsheet

The Bug ToolKit provides the following options to export bugs to a spreadsheet:

Click Export All to Spreadsheet link in the Search Results page under the Search Bugs tab. Specify file name and folder name to save the spreadsheet. All the bugs retrieved by the search will be exported.

Click Export All to Spreadsheet link in the My Notifications tab. Specify file name and folder name to save the spreadsheet. All the saved bugs in all the groups will be exported.

If you are unable to export the spreadsheet, log into the Technical Support Website at
http://www.cisco.com/cisco/web/support/index.html for more information or call Cisco TAC (1-800-553-2447).

New Features and Functionality

This section highlights new features and functionality for Release 9.1. For detailed documentation of each of these features, consult the user documentation.

Common Hardware

Cisco ONS 15454 SDH Software Release 9.1 supports the following new hardware:

40-SMR1-C and 40-SMR2-C Cards

OPT-RAMP-CE Card

TDC-CC and TDC-FC Cards

Tunable SFPs and XFPs

TXP_MR_10EX_C, MXP_2.5G_10EX_C, and MXP_MR_10DMEX_C Cards

40-SMR1-C and 40-SMR2-C Cards

The 40-SMR1-C and 40-SMR2-C cards integrate the following functional blocks onto a single line card:

Optical preamplifier

Optical booster amplifier

Optical service channel (OSC) filter

2x1 wavelength cross-connect (WXC) or a 4x1 WXC

Optical channel monitor (OCM)

The 40-SMR1-C and 40-SMR2-C cards can manage up to 40 channels spaced at 100GHz on each port. The cards are optically passive and provide bidirectional capability. The cards can be installed in Slots 1 to 6 and 12 to 17.

The 40-SMR1-C and 40-SMR2-C can be used along with the 15216-MD-40-ODD (ONS 15216 40-channel mux/demux patch panel) card in terminal, ROADM, or hub nodes. The cards can be used in ring networks, linear networks, or mesh networks.

OPT-RAMP-CE Card

(DWDM only) The OPT-RAMP-CE card is a 20 dBm output power, gain-enhanced version of the OPT-RAMP-C card optimized for short spans.

TDC-CC and TDC-FC Cards

(DWDM only) The TDC-CC and TDC-FC cards reduces the chromatic dispersion of the transmission line. The cards provide a selectable set of discrete negative chromatic dispersion values to compensate for chromatic dispersion of the transmission line. The TDC-CC and TDC-FC cards operate over the entire C-band (in the range of 1529.0 nm to 1562.5 nm) and monitors the optical power at the input and the output ports.

Tunable SFPs and XFPs

The following table provides information on tunable SFPs and XFPs:

SFP or XFP
Card name

ONS-XC-10G-L2

10GE-XP and 10GE-XPE

ONS-XC-10G-I2

ADM-10G

ONS-SE-GE-BXD

GE-XP and GE-XPE

ONS-SE-GE-BXU

GE-XP and GE-XPE

ONS-SI-100-LX10

GE-XPE

ONS-XC-10G-C

OC192SR1/STM64IO Short Reach.
This card is designated as OC192-XFP or STM 64 XFP in CTC.

ONS-XC-10G-C

GE-XP, 10GE-XP, GE-XPE, and 10GE-XPE

ADM-10G

40G MXP

OTN XP

ONS-SI-100-FX

GE-XPE

ONS-SE-Z1

TXP_MR_2.5G and TXPP_MR_2.5G


TXP_MR_10EX_C, MXP_2.5G_10EX_C, and MXP_MR_10DMEX_C Cards

(DWDM only) The maximum likelihood sequence estimation (MLSE) based universal transponder (UT) modules are added to the TXP_MR_10EX_C, MXP_2.5G_10EX_C, and MXP_MR_10DMEX_C cards to support the error decorrelator functionality to enhance system performance. You can enable or disable the error decorrelator functionality using CTC or TL1. The MLSE-based UT module helps to reduce chromatic dispersion (CD) and polarization mode dispersion (PMD) without the use of a dispersion compensation unit (DCU).

New Software Features and Functionality

The following new software features are added for Release 9.1:

10G Ethernet LAN to WAN Conversion

ADM-10G Card Enhancement

Automatic Node Setup Enhancements

Backup NTP/SNTP Server

Booster and OSC-CSM Enhancements

Cisco CRS-1 Router Configuration

Gigabit Ethernet Xponder Card Enhancements

Network Functional View

Onboard Failure Logging

Payload Enhancements on TXP_MR_2.5G and TXPP_MR_2.5G Cards

Photonic Path Trace

Protection Switching Module Standalone

Shared Risk Link Groups

Shelf Voltage and Temperature

10G Ethernet LAN to WAN Conversion

(DWDM only) The OTU2_XP card can be configured to convert the 10G Ethernet LAN traffic to WAN traffic. The OTU2_XP card supports 10G Ethernet LAN Phy to 10G Ethernet WAN Phy conversion on Ports 1 (client port) and 3 (trunk port). The 10G Ethernet LAN to WAN conversion is provisionable from the CTC and TL1.

ADM-10G Card Enhancement

(DWDM only) The ADM-10G card operates on ONS 15454 SONET, ONS 15454 SDH, and DWDM networks to carry optical signals and Gigabit Ethernet signals over DWDM wavelengths for transport. The card aggregates lower bit-rate client SONET or SDH signals onto a C-band tunable DWDM trunk operating at a higher OC-192/STM-64 rate. In a DWDM network, the ADM-10G card transports traffic over DWDM by mapping Gigabit Ethernet and SONET or SDH circuits onto the same wavelength with multiple protection options.

In Release 9.1, Port 17 is configurable as trunk port in a single-card configuration mode and ILK1 in a double-card configuration mode.

Automatic Node Setup Enhancements

(DWDM only) The enhancements made to the Automatic Node Setup (ANS) parameters in Cisco ONS 15454 Software Release 9.1 are:

The Provisioning tab is automatically populated with the ANS parameters when the CTP XML file is imported into CTC.

All the ANS parameters are mapped to the physical ports of the cards.

The Provisioning tab displays the following information for each ANS parameter:

Shelf

Slot

Port (physical position in the chassis)

Value

The ANS parameters can be manually added, modified, or deleted from the Provisioning tab in CTC

Backup NTP/SNTP Server

CTC allows you to specify a backup NTP/SNTP server along with the primary NTP/SNTP server. When the primary NTP/SNTP server fails, the node uses the secondary NTP/SNTP server to synchronize its date and time. If both the primary and secondary NTP/SNTP servers fail, an SNTP-FAIL alarm is raised. The node checks for the availability of the primary or secondary NTP/SNTP server at regular intervals until it can fetch the time from any one of the NTP/SNTP servers.

Booster and OSC-CSM Enhancements

(DWDM only) The following enhancements are made to the booster and OSC-CSM cards in Release 9.1. The Booster and OSC-CSM Enhancements are supported only on DWDM platform.

The photodiodes on the cards are calibrated to new ports

Support for OSC power set-point

Support for performance monitoring (PM) parameters for all power values

Support for new alarm thresholds

Cisco CRS-1 Router Configuration

(DWDM only) In Release 9.1, Link Management Protocol (LMP) can be configured automatically or manually on the Cisco CRS-1 router using Cisco IOS XR Software Release 3.9.0 and later. If an earlier version of the Cisco IOS XR software is used, LMP cannot be configured and the router is visible in CTC (network view) as an unknown node.

Gigabit Ethernet Xponder Card Enhancements

(DWDM only) The following enhancements have been made to the GE_XP, 10GE_XP, GE_XPE, 10GE_XPE cards in Cisco ONS 15454 Software Release 9.1:

An end-to-end SVLAN circuit can be created between client ports configured in network interface (NNI) mode.

A provisional patchcord (PPC) can be created between NNI client and trunk ports provisioned in L2-over-DWDM mode.

MAC addresses can be retrieved if the card is provisioned in L2-over-DWDM mode.

Network Functional View

(DWDM only) This feature displays a graphical representation of existing physical connections at the Network level. Circuit connections, optical power, and alarms in the DWDM network can also be viewed. If a loss of signal occurs in the network, NFV finds an alternate network path and re-establishes the connection.

Onboard Failure Logging

(DWDM only) Onboard Failure Logging (OBFL) records events that occur during the card operation. In the event of a card failure, the event log assists in determining the root cause of failure.

The OBFL feature is supported on the following cards:

OPT-BST

OPT-PRE

40-SMR1-C

40-SMR2-C


Note To determine if OBFL is supported on the OPT-BST and OPT-PRE cards running in your system, contact the Cisco Technical Assistance Center (TAC).


Payload Enhancements on TXP_MR_2.5G and TXPP_MR_2.5G Cards

(DWDM only) The TXP_MR_2.5G and TXPP_MR_2.5G cards are enhanced to pass data transparently from a client side interface to a trunk side interface, and similarly from a trunk interface to a client interface. The following two new payloads are added to support the pass-through mode on TXP_MR_2.5G and TXPP_MR_2.5G cards:

DVB_ASI —Video Payload

ISC_1—Data Storage Payload

Photonic Path Trace

The Photonic Path Trace (PPT) validates optical paths in ONS 15454 MSTP networks. The power values on each port are measured to validate the path. For every node in the optical path, a plot of power values versus threshold values are displayed.

Protection Switching Module Standalone

(DWDM only) The Protection Switching Module (PSM) card can be used in standalone configuration. In standalone configuration, the PSM card can be equipped in any slot and supports all node configurations. The PSM card in standalone configuration provides only basic functionality such as, protection against a fiber cut, optical safety, and automatic laser shutdown (ALS). It does not provide other functionalities such as, automatic power control (APC), automatic node setup (ANS), or circuit management.

Shared Risk Link Groups

(DWDM only) SRLG is a unique 32-bit number that can be assigned to a link or an MSTP node. There are two types of SRLGs— unique and additional. If SRLG is provisioned on MSTP nodes and links, the SRLG information is used for making routing decisions. SRLGs part of the current network can be viewed as reports.

Shelf Voltage and Temperature

The CTC displays the input voltage and temperature of the ONS 15454 chassis. The voltage supplied to the shelf (in millivolts) is displayed in the voltage area of the pane in the CTC. The temperature of the shelf (in degrees Celsius) is displayed in the temperature area of the pane in the CTC.

The temperature measured by the TCC2/TCC2P sensors appear on the LCD screen in the ONS 15454 chassis.

TL1

TL1 Command Changes

New Commands

The following new TL1 commands are added:

CLR-MACTABLE

DLT-40GIGE

DLT-5GIB

DLT-8GFC

DLT-DVBASI

DLT-FFP-40GIGE

DLT-FFP-8GFC

DLT-FFP-DVBASI

DLT-FFP-FSTE

DLT-FFP-ISC1

DLT-FFP-OTU3

DLT-FSTE

DLT-ISC1

DLT-OTU3

DLT-RMONTH-40GIGE

DLT-RMONTH-8GFC

DLT-WDMANS

ED-40GIGE

ED-5GIB

ED-8GFC

ED-DVBASI

ED-FFP-40GIGE

ED-FFP-8GFC

ED-FFP-DVBASI

ED-FFP-FSTE

ED-FFP-ISC1

ED-FFP-OTU3

ED-ISC1

ED-OTU3

ENT-40GIGE

ENT-5GIB

ENT-8GFC

ENT-DVBASI

ENT-FFP-40GIGE

ENT-FFP-8GFC

ENT-FFP-DVBASI

ENT-FFP-FSTE

ENT-FFP-ISC1

ENT-FFP-OTU3

ENT-FSTE

ENT-ISC1

ENT-OTU3

ENT-RMONTH-40GIGE

ENT-RMONTH-8GFC

ENT-WDMANS

INIT-REG-40GIGE

INIT-REG-5GIB

INIT-REG-8GFC

INIT-REG-DVBASI

INIT-REG-ISC1

INIT-REG-OTU3

OPR-LPBK-40GIGE

OPR-LPBK-5GIB

OPR-LPBK-8GFC

OPR-LPBK-OTU3

OPR-PROTNSW-40GIGE

OPR-PROTNSW-8GFC

OPR-PROTNSW-DVBASI

OPR-PROTNSW-FSTE

OPR-PROTNSW-ISC1

OPR-PROTNSW-OTU3

RLS-LPBK-40GIGE

RLS-LPBK-5GIB

RLS-LPBK-8GFC

RLS-LPBK-OTU3

RLS-PROTNSW-40GIGE

RLS-PROTNSW-8GFC

RLS-PROTNSW-DVBASI

RLS-PROTNSW-FSTE

RLS-PROTNSW-ISC1

RLS-PROTNSW-OTU3

RMV-40GIGE

RMV-5GIB

RMV-8GFC

RMV-DVBASI

RMV-ISC1

RMV-OTU3

RST-40GIGE

RST-5GIB

RST-8GFC

RST-DVBASI

RST-ISC1

RST-OTU3

RTRV-40GIGE

RTRV-5GIB

RTRV-8GFC

RTRV-ALM-40GIGE

RTRV-ALM-5GIB

RTRV-ALM-8GFC

RTRV-ALM-DVBASI

RTRV-ALM-ISC1

RTRV-ALM-OTU3

RTRV-ALMTH-40GIGE

RTRV-ALMTH-5GIB

RTRV-ALMTH-8GFC

RTRV-ALMTH-DVBASI

RTRV-ALMTH-FSTE

RTRV-ALMTH-ISC1

RTRV-ALMTH-OTU3

RTRV-BWP-ETH

RTRV-COND-40GIGE

RTRV-COND-5GIB

RTRV-COND-8GFC

RTRV-COND-DVBASI

RTRV-COND-ISC1

RTRV-COND-OTU3

RTRV-COS-ETH

RTRV-CRS-ETH

RTRV-DSCP-ETH

RTRV-DVBASI

RTRV-FFP-40GIGE

RTRV-FFP-8GFC

RTRV-FFP-DVBASI

RTRV-FFP-FSTE

RTRV-FFP-ISC1

RTRV-FFP-OTU3

RTRV-ISC1

RTRV-MACTABLE

RTRV-NE-APC

RTRV-NE-WDMANS

RTRV-OCM

RTRV-OTU3

RTRV-PATH-OCH

RTRV-PM-40GIGE

RTRV-PM-5GIB

RTRV-PM-8GFC

RTRV-PM-DVBASI

RTRV-PM-ISC1

RTRV-PM-OTU3

RTRV-PMSCHED-40GIGE

RTRV-PMSCHED-5GIB

RTRV-PMSCHED-8GFC

RTRV-PMSCHED-DVBASI

RTRV-PMSCHED-ISC1

RTRV-PMSCHED-OTU3

RTRV-PROTNSW-40GIGE

RTRV-PROTNSW-8GFC

RTRV-PROTNSW-DVBASI

RTRV-PROTNSW-FSTE

RTRV-PROTNSW-ISC1

RTRV-PROTNSW-OTU3

RTRV-RMONTH-40GIGE

RTRV-RMONTH-8GFC

RTRV-SHELFSTAT

RTRV-SLV-WDMANS

RTRV-TH-40GIGE

RTRV-TH-5GIB

RTRV-TH-8GFC

RTRV-TH-DVBASI

RTRV-TH-FSTE

RTRV-TH-ISC1

RTRV-TH-OTU3

SCHED-PMREPT-40GIGE

SCHED-PMREPT-5GIB

SCHED-PMREPT-8GFC

SCHED-PMREPT-DVBASI

SCHED-PMREPT-ISC1

SCHED-PMREPT-OTU3

SET-ALMTH-40GIGE

SET-ALMTH-5GIB

SET-ALMTH-8GFC

SET-ALMTH-DVBASI

SET-ALMTH-FSTE

SET-ALMTH-ISC1

SET-ALMTH-OTU3

SET-TH-40GIGE

SET-TH-5GIB

SET-TH-8GFC

SET-TH-DVBASI

SET-TH-FSTE

SET-TH-ISC1

SET-TH-OTU3



Note In Software Release 9.1, the following OSI TL1 commands are not supported.


Changed Commands

The following new TL1 commands are changed:

ED-FSTE— A LIENBALE parameter is added to this command in Release 9.1.

RTRV-FSTE— A LIENBALE parameter is added to this command in Release 9.1.

Command Syntax Changes

The syntax of the following commands have changed:

ED-EQPT syntax changed from:

ED-EQPT[:<TID>]:<aid>:<CTAG>[:::PROTID=<protid>],[PRTYPE=<prtype>],[RVRTV=<rvrtv>],[RVTM=<rvtm>],[CARDMODE=<cardmode>],[PEERID=<peerid>],[REGENNAME=<regenname>],[PEERNAME=<peername>],[CMDMDE=<cmdmde>],[RETIME=<retime>],[SHELFROLE=<shelfrole>],[NEWSHELFID=<newshelfid>],[FRPROLE=<frprole>],[FRPSTATE=<frpstate>][:<pst>[,<sst>]];

To:

ED-EQPT[:<TID>]:<aid>:<CTAG>[:::PROTID=<protid>],[PRTYPE=<prtype>],[RVRTV=<rvrtv>],[RVTM=<rvtm>],[CARDMODE=<cardmode>],[PEERID=<peerid>],[REGENNAME=<regenname>],[PEERNAME=<peername>],[CMDMDE=<cmdmde>],[RETIME=<retime>],[SHELFROLE=<shelfrole>],[NEWSHELFID=<newshelfid>],[FRPROLE=<frprole>],[FRPSTATE=<frpstate>],[FRPHOLDOFFTIME=<frpholdofftime>][:<pst>[,<sst>]];

ED-FSTE syntax changed from:

ED-FSTE[:<TID>]:<src>:<CTAG>[:::FLOW=<flow>],[EXPDUPLEX=<expduplex>],[EXPSPEED=<expspeed>],[SELECTIVEAUTO=<selectiveauto>],[VLANCOS=<vlancosthreshold>],[IPTOS=<iptosthreshold>],[NAME=<name>],[CMDMDE=<cmdmde>],[SUPPRESS=<suppress>],[SOAK=<soak>],[LITIMER=<litimer>][:<pst>[,<sst>]];

To:

ED-FSTE[:<TID>]:<src>:<CTAG>[:::FLOW=<flow>],[EXPDUPLEX=<expduplex>],[EXPSPEED=<expspeed>],[SELECTIVEAUTO=<selectiveauto>],[VLANCOS=<vlancosthreshold>],[IPTOS=<iptosthreshold>],[NAME=<name>],[CMDMDE=<cmdmde>],[SUPPRESS=<suppress>],[SOAK=<soak>],[LITIMER=<litimer>],[FREQ=<freq>],[LOSSB=<lossb>][:<pst>[,<sst>]];

ED-NE-GEN syntax changed from:

ED-NE-GEN[:<TID>]::<CTAG>[:::NAME=<name>],[IPADDR=<ipaddr>],[IPMASK=<ipmask>],[DEFRTR=<defrtr>],[IPV6ADDR=<ipv6addr>],[IPV6PREFLEN=<ipv6preflen>],[IPV6DEFRTR=<ipv6defrtr>],[IPV6ENABLE=<ipv6enable>],[IIOPPORT=<iiopport>],[NTP=<ntp>],[SUPPRESSIP=<suppressip>],[MODE=<mode>],[SERIALPORTECHO=<serialportecho>],[OSIROUTINGMODE=<osiroutingmode>],[OSIL1BUFSIZE=<osil1bufsize>],[OSIL2BUFSIZE=<osil2bufsize>];

To:

ED-NE-GEN[:<TID>]::<CTAG>[:::NAME=<name>],[IPADDR=<ipaddr>],[IPMASK=<ipmask>],[DEFRTR=<defrtr>],[IPV6ADDR=<ipv6addr>],[IPV6PREFLEN=<ipv6preflen>],[IPV6DEFRTR=<ipv6defrtr>],[IPV6ENABLE=<ipv6enable>],[IIOPPORT=<iiopport>],[NTP=<ntp>],[SUPPRESSIP=<suppressip>],[MODE=<mode>],[MSPUBVLANID=<mspubvlanid>],[MSINTLVLANID=<msintlvlanid>],[SERIALPORTECHO=<serialportecho>],[OSIROUTINGMODE=<osiroutingmode>],[OSIL1BUFSIZE=<osil1bufsize>],[OSIL2BUFSIZE=<osil2bufsize>],[BKUPNTP=<bkupntp>];

ED-OCH syntax changed from:

ED-OCH[:<TID>]:<aid>:<CTAG>[:::EXPWLEN=<expwlen>],[VOAATTN=<voaattn>],[VOAPWR=<voapwr>],[CALOPWR=<calopwr>],[CHPOWER=<chpower>],[NAME=<portname>],[OSDBER=<sdber>],[GCC=<gcc>],[GCCRATE=<gccrate>],[DWRAP=<drwap>],[FEC=<fec>],[PAYLOADMAP=<payloadmap>],[SOAK=<soak>],[LOSSB=<lossb>],[CMDMDE=<cmdmde>],[PEERID=<peerid>],[REGENNAME=<regenname>],[PORTMODE=<portmode>],[ODUTRANSMODE=<odutransmode>][:<pst>[,<sst>]];

To:

ED-OCH[:<TID>]:<aid>:<CTAG>[:::EXPWLEN=<expwlen>],[VOAATTN=<voaattn>],[FCS=<fcs>],[VOAPWR=<voapwr>],[CALOPWR=<calopwr>],[NAME=<portname>],[OSDBER=<sdber>],[GCC=<gcc>],[GCCRATE=<gccrate>],[DWRAP=<drwap>],[FEC=<fec>],[PAYLOADMAP=<payloadmap>],[SOAK=<soak>],[LOSSB=<lossb>],[CMDMDE=<cmdmde>],[PEERID=<peerid>],[REGENNAME=<regenname>],[PORTMODE=<portmode>],[ODUTRANSMODE=<odutransmode>],[ERRORDECORRELATOR=<errordecorrelator>][:<pst>[,<sst>]];

ED-OMS syntax changed from:

ED-OMS[:<TID>]:<aid>:<CTAG>[:::EXPBAND=<expband>],[VOAATTN=<voaattn>],[VOAPWR=<voapwr>],[CALOPWR=<calopwr>],[CHPOWER=<chpower>],[NAME=<name>],[SOAK=<soak>],[CMDMDE=<cmdmde>][:<pst>[,<sst>]];

To:

ED-OMS[:<TID>]:<aid>:<CTAG>[:::EXPBAND=<expband>],[VOAATTN=<voaattn>],[VOAPWR=<voapwr>],[CALOPWR=<calopwr>],[NAME=<name>],[SOAK=<soak>],[CMDMDE=<cmdmde>][:<pst>[,<sst>]];

ED-OTS syntax changed from:

ED-OTS[:<TID>]:<aid>:<CTAG>[:::VOAATTN=<voaattn>],[VOAPWR=<voapwr>],[OFFSET=<offset>],[REFTILT=<reftilt>],[CALTILT=<caltilt>],[OSRI=<osri>],[AMPLMODE=<amplmode>],[CHPOWER=<chpower>],[EXPGAIN=<expgain>],[NAME=<name>],[SOAK=<soak>],[CMDMDE=<cmdmde>][:<pst>[,<sst>]];

To:

ED-OTS[:<TID>]:<aid>:<CTAG>[:::VOAATTN=<voaattn>],[VOAPWR=<voapwr>],[OFFSET=<offset>],[CALTILT=<caltilt>],[OSRI=<osri>],[NAME=<name>],[SOAK=<soak>],[FG=<fg>],[CG=<cg>],[CMDMDE=<cmdmde>][:<pst>[,<sst>]];

ED-WDMANS syntax changed from:

ED-WDMANS[:<TID>]:<aid>:<CTAG>[::<role>][:POWERIN=<powerIn>],[POWEROUT=<powerOut>],[POWEREXP=<powerExp>],[POWEROSC=<powerOSC>],[NTWTYPE=<ringType>],[PPMESH=<ppmesh>],[DITHER=<dither>];

To:

ED-WDMANS[:<TID>]:<aid>:<CTAG>[::<wlen>][:VOAATTN=<voaattn>],[POWEROSC=<powerosc>],[NTWTYPE=<ntwtype>],[CHLOSS=<chloss>],[GAIN=<gain>],[TILT=<tilt>],[CHPWR=<chpwr>],[AMPLMODE=<amplmode>],[RATIO=<ratio>],[OSCLOSS=<oscloss>],[DITHER=<dither>],[TOTALPWR=<totalpwr>];

ENT-EQPT syntax changed from:

ENT-EQPT[:<TID>]:<aid>:<CTAG>::<aidtype>[:PROTID=<protid>],[PRTYPE=<prtype>],[RVRTV=<rvrtv>],[RVTM=<rvtm>],[CARDMODE=<cardmode>],[PEERID=<protid>],[REGENNAME=<regenname>],[CMDMDE=<cmdmde>],[TRANSMODE=<transmode>],[RETIME=<retime>],[SHELFROLE=<shelfrole>],[FRPROLE=<frprole>],[FRPSTATE=<frpstate>][:];

To:

ENT-EQPT[:<TID>]:<aid>:<CTAG>::<aidtype>[:PROTID=<protid>],[PRTYPE=<prtype>],[RVRTV=<rvrtv>],[RVTM=<rvtm>],[CARDMODE=<cardmode>],[PEERID=<protid>],[REGENNAME=<regenname>],[CMDMDE=<cmdmde>],[TRANSMODE=<transmode>],[RETIME=<retime>],[SHELFROLE=<shelfrole>],[FRPROLE=<frprole>],[FRPSTATE=<frpstate>],[FRPHOLDOFFTIME=<frpholdofftime>][:];


Note In Software Release 9.1, the OSI TL1 commands are not supported.


Command Response Changes

The following TL1 command responses have changed:

RTRV-ALM-BITS response changes:

<aid>,[<condtype>]:<condeff>,,,[<locn>],[<dirn>],,:,

To:

<aid>,[<aidtype>]:<ntfcncde>,<condtype>,<srveff>,[<ocrdat>],[<ocrtm>],[<location>],[<direction>]:[<desc>],

RTRV-ALM-UCP response changes:

<aid>:<ntfcncde>,<condtype>,<srveff>,,,,:[<desc>],

To:

<aid>:<ntfcncde>,<condtype>,<srveff>,[<ocrdat>],[<ocrtm>],,:[<desc>],

RTRV-ALS response changes:

<slot>,[<rslt>]:[<diagtype>],[<peer>],[<aid>],[<aidtype>]

To:

<aid>,[<aidtype>]:[<alsmode>],[<alsrcint>],[<alsrcpw>],[<lsrstat>]

RTRV-BLSR response changes:

[<UID>]:[<aid>]:[<ntfcncde>],[<secualmtype>],[<time>],[<date>],[<source>],[<userid>],[<dbchgseq>],[<command>],[<aid>],,

To:

[<aid>]::[<ringid>],[<nodeid>],[<mode>],[<rvrtv>],[<rvtm>],[<srvrtv>],[<srvtm>],[<eastwork>],[<westwork>],[<eastprot>],[<westprot>]

RTRV-EQPT response changes:

<aid>:<aidtype>,<equip>,[<role>],[<status>]:[<protid>],[<prtype>],[<rvrtv>],[<rvtm>],[<cardname>],[<ioscfg>],[<cardmode>],[<peerid>],[<regenname>],[<peername>],[<transmode>],[<retime>],[<shelfrole>],[<frprole>],[<frpstate>]:<pst>,[<sst>]

To:

<aid>:<aidtype>,<equip>,[<role>],[<status>]:[<protid>],[<prtype>],[<rvrtv>],[<rvtm>],[<cardname>],[<ioscfg>],[<cardmode>],[<peerid>],[<regenname>],[<peername>],[<transmode>],[<retime>],[<shelfrole>],[<frprole>],[<frpstate>],[<frpholdofftime>]:<pst>,[<sst>]

RTRV-FSTE response changes:

<aid>::[<adminstate>],[<linkstate>],[<mtu>],[<flowctrl>],[<optics>],[<duplex>],[<speed>],[<flow>],[<expduplex>],[<expspeed>],[<vlancosthreshold>],[<iptosthreshold>],[<name>],[<suppress>],[<soak>],[<soakleft>],[<selectiveauto>],[<litimer>]:<pst>,[<sst>]

To:

<aid>:[<role>],[<status>]:[<adminstate>],[<linkstate>],[<mtu>],[<flowctrl>],[<optics>],[<duplex>],[<speed>],[<flow>],[<expduplex>],[<expspeed>],[<vlancosthreshold>],[<iptosthreshold>],[<name>],[<suppress>],[<soak>],[<soakleft>],[<selectiveauto>],[<litimer>],[<lbcl>],[<opt>],[<opr>],[<freq>],[<lossb>],[<actflow>],[<actduplex>],[<actspeed>]:<pst>,[<sst>]

RTRV-NE-GEN response changes:

<[<ipaddr>],[<ipmask>],[<defrtr>],[<ipv6addr>],[<ipv6preflen>],[<ipv6defrtr>],[<ipv6enable>],[<iiopport>],[<ntp>],[<name>],[<swver>],[<load>],[<protswver>],[<protload>],[<defdesc>],[<platform>],[<secumode>],[<suppressip>],[<mode>],[<autopm>],[<serialportecho>],[<osiroutingmode>],[<osil1bufsize>],[<osil2bufsize>]

To:

[<ipaddr>],[<ipmask>],[<defrtr>],[<ipv6addr>],[<ipv6preflen>],[<ipv6defrtr>],[<ipv6enable>],[<iiopport>],[<ntp>],[<name>],[<swver>],[<load>],[<protswver>],[<protload>],[<defdesc>],[<platform>],[<secumode>],[<suppressip>],[<mode>],[<mspubvlanid>],[<msintlvlanid>],[<autopm>],[<serialportecho>],[<osiroutingmode>],[<osil1bufsize>],[<osil2bufsize>],[<net>],[<bkupntp>]

RTRV-OCH response changes:

<aid>:,,[<role>],[<status>]:[<opticalPortType>],[<power>],[<expWlen>],[<actWlen>],[<iloss>],[<voamode>],[<voaattn>],[<voapwr>],[<voarefattn>],[<voarefpwr>],[<refopwr>],[<calopwr>],[<chpower>],[<chpowerFlg>],[<portname>],[<gcc>],[<gccrate>],[<dwrap>],[<fec>],[<payloadmap>],[<lbclcurr>],[<optcurr>],[<oprcurr>],[<osfber>],[<osdber>],[<soak>],[<soakleft>],[<lossb>],[<peerid>],[<regenname>],[<portmode>],[<odutransmode>]:<pst>,[<sst>]

To:

<aid>:,,[<role>],[<status>]:[<opticalPortType>],[<power>],[<expWlen>],[<actWlen>],[<iloss>],[<voamode>],[<voaattn>],[<fcs>],[<voapwr>],[<voarefattn>],[<voarefpwr>],[<refopwr>],[<calopwr>],[<chpower>],[<chpowerFlg>],[<addopwr>],[<addopwr>],[<portname>],[<gcc>],[<gccrate>],[<dwrap>],[<fec>],[<payloadmap>],[<lbclcurr>],[<optcurr>],[<oprcurr>],[<osfber>],[<osdber>],[<soak>],[<soakleft>],[<lossb>],[<peerid>],[<regenname>],[<portmode>],[<odutransmode>],[<errordecorrelator>]:<pst>,[<sst>]

RTRV-OTS response changes:

<aid>:,,[<role>],[<status>]:<opticalPortType>,[<power>],[<iloss>],[<voamode>],[<voaattn>],[<voapwr>],[<voarefattn>],[<voarefpwr>],[<osri>],[<amplmode>],[<amplmodeFlg>],[<chpower>],[<chpowerFlg>],[<gain>],[<expgain>],[<expgainFlg>],[<refopwr>],[<offset>],[<reftilt>],[<reftiltFlg>],[<caltilt>],[<aseopwr>],[<dculoss>],[<awgst>],[<heatst>],[<name>],[<soak>],[<soakleft>],[<wrkchannels>],[<ratio>],[<raman_status>],[<raman_quality>],[<time>],[<date>],[<raman_restore_fc>],[<time_fc>],[<date_fc>]:<pst>,[<sst>]

To:

<aid>:,,[<role>],[<status>]:<opticalPortType>,[<power>],[<oscpower>],[<iloss>],[<voamode>],[<voaattn>],[<voapwr>],[<voarefattn>],[<voarefpwr>],[<osri>],[<amplmode>],[<amplmodeFlg>],[<chpower>],[<chpowerFlg>],[<gain>],[<expgain>],[<expgainFlg>],[<refopwr>],[<offset>],[<reftilt>],[<reftiltFlg>],[<caltilt>],[<aseopwr>],[<dculoss>],[<awgst>],[<heatst>],[<name>],[<soak>],[<soakleft>],[<wrkchannels>],[<ratio>],[<raman_status>],[<raman_quality>],[<time>],[<date>],[<raman_restore_fc>],[<time_fc>],[<date_fc>],[<tdcu_fg>],[<tdcu_cg>]:<pst>,[<sst>]

TL1 ENUM Changes

ALM_THR

The following ALM_THR enum items are added:

ALM_THR_ADD_HDEG => "ADD-HDEG"

ALM_THR_ADD_HFAIL => "ADD-HFAIL"

ALM_THR_ADD_LDEG => "ADD-LDEG"

ALM_THR_ADD_LFAIL => "ADD-LFAIL"

ALM_THR is used in the following commands:

RTRV-ALMTH-MOD2O

SET-ALMTH-MOD2O

CARDMODE

The following CARDMODE enum items are added:

CARDMODE_LANWAN_SQUELCH => "10GLANWAN-LINE-SQUELCH"

CARDMODE_PSM_NORMAL => "PSM-NORMAL"

CARDMODE_PSM_STANDALONE => "PSM-STANDALONE"

CARDMODE_WXC80_BIDI => "WXC80-BIDI"

CARDMODE_WXC80_DMX => "WXC80-DMX"

CARDMODE_WXC80_MUX => "WXC80-MUX"

CARDMODE is used in the following commands:

ED-EQPT

ED-OCH

ENT-EQPT

RTRV-EQPT

RTRV-OCH

EQPT_TYPE

The following EQPT_TYPE enum items are added:

EQPT_TYPE_EQPT_ID_15216_MD_40_EVEN => "15216-MD-40-EVEN"

EQPT_TYPE_EQPT_ID_15216_MD_40_ODD => "15216-MD-40-ODD"

EQPT_TYPE_EQPT_ID_15216_MD_ID_50 => "15216-MD-ID-50"

EQPT_TYPE_EQPT_ID_40_MXP_C => "40-MXP-C"

EQPT_TYPE_EQPT_ID_40_SMR1_C => "40-SMR1-C"

EQPT_TYPE_EQPT_ID_40_SMR2_C => "40-SMR2-C"

EQPT_TYPE_EQPT_ID_40_TXP_C => "40-TXP-C"

EQPT_TYPE_EQPT_ID_80_WXC_C => "80-WXC-C"

EQPT_TYPE_EQPT_ID_DCU => "DCU"

EQPT_TYPE_EQPT_ID_FMEC_155E_CARD_1TO3 => "FMEC-155E-1TO3"

EQPT_TYPE_EQPT_ID_FMEC_155E_CARD_UNPROT => "FMEC-155E-UNPROT"

EQPT_TYPE_EQPT_ID_OPT_RAMP_E => "OPT-RAMP-CE"

EQPT_TYPE_EQPT_ID_PP_4_SMR => "MESH-PP-SMR"

EQPT_TYPE_EQPT_ID_PP_4_SMR => "PP-4-SMR"

EQPT_TYPE_EQPT_ID_PP_MESH_4 => "PP-MESH-4"

EQPT_TYPE_EQPT_ID_PP_MESH_8 => "PP-MESH-8"

EQPT_TYPE_EQPT_ID_TDC_CC => "TDC-CC"

EQPT_TYPE_EQPT_ID_TDC_FC => "TDC-FC"

The following EQPT_TYPE is used in the following commands:

REPT-ALM-EQPT

REPT-ALM-MOD2ALM

REPT-ALM-SYNCN

REPT-EVT-EQPT

REPT-EVT-MOD2ALM

REPT-EVT-SYNCN

EQUIPMENT_TYPE

The following EQUIPMENT_TYPE enum items are added:

EQUIPMENT_TYPE_ET_15216_MD_40_EVEN => "15216-MD-40-EVEN"

EQUIPMENT_TYPE_ET_15216_MD_40_ODD => "15216-MD-40-ODD"

EQUIPMENT_TYPE_ET_15216_MD_ID_50 => "15216-MD-ID-50"

EQUIPMENT_TYPE_ET_40_MXP_C => "40-MXP-C"

EQUIPMENT_TYPE_ET_40_SMR1_C => "40-SMR1-C"

EQUIPMENT_TYPE_ET_40_SMR2_C => "40-SMR2-C"

EQUIPMENT_TYPE_ET_40_TXP_C => "40-TXP-C"

EQUIPMENT_TYPE_ET_80_WXC_C => "80-WXC-C"

EQUIPMENT_TYPE_ET_DCU => "DCU"

EQUIPMENT_TYPE_ET_OPT_RAMP_E => "OPT-RAMP-CE"

EQUIPMENT_TYPE_ET_PP_4_SMR => "MESH-PP-SMR"

EQUIPMENT_TYPE_ET_PP_4_SMR => "PP-4-SMR"

EQUIPMENT_TYPE_ET_PP_MESH_4 => "PP-MESH-4"

EQUIPMENT_TYPE_ET_PP_MESH_8 => "PP-MESH-8"

EQUIPMENT_TYPE_ET_TDC_CC => "TDC-CC"

EQUIPMENT_TYPE_ET_TDC_FC => "TDC-FC"

EQUIPMENT_TYPE is used in the following commands:

CHG-EQPT

ENT-EQPT

FRPHOLDOFFTIME

The following FRPHOLDOFFTIME enum items are added:

FRPHOLDOFF_100MSEC => "100-MSEC"

FRPHOLDOFF_1MSEC => "1-MSEC"

FRPHOLDOFF_200MSEC => "200-MSEC"

FRPHOLDOFF_2MSEC => "2-MSEC"

FRPHOLDOFF_500MSEC => "500-MSEC"

FRPHOLDOFF_50MSEC => "50-MSEC"

FRPHOLDOFF_5MSEC => "5-MSEC"

FRPHOLDOFF_DISABLED => "DISABLED"

FRPHOLDOFFTIME is used in the following commands:

ED-EQPT

ENT-EQPT

RTRV-EQPT

MAC_ADDRTYPE

The following MAC_ADDRTYPE enum items are added:

CARD_MAC => "CARD-MAC"

LEARNED_MAC => "LEARNED-MAC"

MAC_ADDRTYPE is used in the following commands:

RTRV-MACTABLE

MOD1PAYLOAD

The following MOD1PAYLOAD enum items are added:

MOD1PAYLOAD_40GIGE => "40GIGE"

MOD1PAYLOAD_5GIB => "5GIB"

MOD1PAYLOAD_8GFC => "8GFC"

MOD1PAYLOAD_DVBASI => "DVBASI"

MOD1PAYLOAD_ISC1 => "ISC1"

MOD1PAYLOAD_OTU3 => "OTU3"

MOD1PAYLOAD is used in the following commands:

ENT-MOD1

DLT-MOD1

ED-MOD1

RTRV-MOD1

MOD2

The following MOD2 enum items are added:

MOD2_M2_40GIGE => "40GIGE"

MOD2_M2_5GIB => "5GIB"

MOD2_M2_8GFC => "8GFC"

MOD2_M2_DVBASI => "DVBASI"

MOD2_M2_ISC1 => "ISC1"

MOD2_M2_OTU3 => "OTU3"

MOD2 is used in the following commands:

RTRV-FFP

RTRV-PMSCHED-ALL

RTRV-PMSCHED-MOD2

MOD2ALM

The following MOD2ALM enum items added:

MOD2ALM_M2_40GIGE => "40GIGE"

MOD2ALM_M2_5GIB => "5GIB"

MOD2ALM_M2_8GFC => "8GFC"

MOD2ALM_M2_DVBASI => "DVBASI"

MOD2ALM_M2_ISC1 => "ISC1"

MOD2ALM_M2_OTU3 => "OTU3"

MOD2ALM is used in the following commands:

RTRV-ALM-MOD2ALM

RTRV-COND-MOD2ALM

MOD2B

The following MOD2B enum items are added:

MOD2B_M2_40GIGE => "40GIGE"

MOD2B_M2_5GIB => "5GIB"

MOD2B_M2_8GFC => "8GFC"

MOD2B_M2_DVBASI => "DVBASI"

MOD2B_M2_ISC1 => "ISC1"

MOD2B_M2_OTU3 => "OTU3"

MOD2B is used in the following commands:

RTRV-ALM-ALL

RTRV-ALM-EQPT

RTRV-ALS

RTRV-COND-ALL

RTRV-COND-EQPT

RTRV-PM-MOD2

RTRV-TH-ALL

RTRV-TH-MOD2

MOD2O

The following MOD2O enum items are added:

MOD2O_M2_40GIGE => "40GIGE"

MOD2O_M2_5GIB => "5GIB"

MOD2O_M2_8GFC => "8GFC"

MOD2O_M2_DVBASI => "DVBASI"

MOD2O_M2_ISC1 => "ISC1"

MOD2O_M2_OTU3 => "OTU3"

MOD2O is used in the following commands:

RTRV-ALMTH-MOD2O

MOD2_DATA

The following MOD2_DATA enum items added:

MOD2_DATA_M2_40GIGE => "40GIGE"

MOD2_DATA_M2_8GFC => "8GFC"

MOD2_DATA is used in the following commands:

RTRV-RMONTH-ETH

OPTICAL_LINK_TYPE

The following OPTICAL_LINK_TYPE enum items are added:

OPTICAL_LINK_TYPE_OL_MPO => "MPO"

OPTICAL_LINK_TYPE is used in the following commands:

RTRV-LINK

OPTICAL_PORT_TYPE

The following OPTICAL_PORT_TYPE enum items are added:

OPTICAL_PORT_TYPE_OPT_PORT_AD_BIDI => "AD"

OPTICAL_PORT_TYPE_OPT_PORT_COM_BIDI => "COM"

OPTICAL_PORT_TYPE_OPT_PORT_EAD_BIDI => "EAD"

OPTICAL_PORT_TYPE is used in the following commands:

RTRV-OCH

RTRV-OMS

RTRV-OTS

OPTICAL_WLEN

The following OPTICAL_WLEN enum items are added:

OPTICAL_WLEN_WL_1528_77 => "1528.77"

OPTICAL_WLEN is used in the following commands:

DLT-WDMANS

ED-DWDM-CLNT

ED-FC

ED-FSTE

ED-GIGE

ED-OCH

ED-OCN-TYPE

ED-OTU2

ED-WDMANS

ENT-WDMANS

RTRV-DWDM-CLNT

RTRV-FC

RTRV-FSTE

RTRV-GIGE

RTRV-LNK

RTRV-OCH

RTRV-OCN-TYPE

RTRV-OTU2

RTRV-PATH-OCH

RTRV-WDANS

PAYLOAD

The following PAYLOAD enum items are added:

PAYLOAD_PT_40GE => "40GIGE"

PAYLOAD_PT_5GIB => "5GIB"

PAYLOAD_PT_8GFC => "8GFC"

PAYLOAD_PT_DVB_ASI => "DVBASI"

PAYLOAD_PT_FE => "FSTE"

PAYLOAD_PT_ISC1 => "ISC1"

PAYLOAD_PT_STM256 => "STM256"

PAYLOAD is used in the following commands:

RTRV-FAC

REGULATED_PORT_TYPE

The following REGULATED_PORT_TYPE enum items are added:

REGULATED_PORT_MISSING_INPUT_PWR_PARAM => "MISSING-INPUT-PWR-PARAM"

REGULATED_PORT_MISSING_OUTPUT_PWR_PARAM => "MISSING-OUTPUT-PWR-PARAM"

REGULATED_PORT_TYPE is used in the following commands:

RTRV-NE-WDMANS

TDCU_CG

The following TDCU_CG enum items are added:

TDCU_CG_0 => "0"

TDCU_CG_1 => "-110"

TDCU_CG_10 => "-1100"

TDCU_CG_11 => "-1210"

TDCU_CG_12 => "-1320"

TDCU_CG_13 => "-1430"

TDCU_CG_14 => "-1540"

TDCU_CG_15 => "-1650"

TDCU_CG_2 => "-220"

TDCU_CG_3 => "-330"

TDCU_CG_4 => "-440"

TDCU_CG_5 => "-550"

TDCU_CG_6 => "-660"

TDCU_CG_7 => "-770"

TDCU_CG_8 => "-880"

TDCU_CG_9 => "-990"

TDCU_CG is used in the following commands:

ED-OTS

RTRV-OTS

TDCU_FG

The following TDCU_FG enum items are added:

TDCU_FG_0 => "0"

TDCU_FG_1 => "-45"

TDCU_FG_10 => "-450"

TDCU_FG_11 => "-495"

TDCU_FG_12 => "-540"

TDCU_FG_13 => "-585"

TDCU_FG_14 => "-630"

TDCU_FG_15 => "-675"

TDCU_FG_2 => "-90"

TDCU_FG_3 => "-135"

TDCU_FG_4 => "-180"

TDCU_FG_5 => "-225"

TDCU_FG_6 => "-270"

TDCU_FG_7 => "-315"

TDCU_FG_8 => "-360"

TDCU_FG_9 => "-405"

TDCU_FG is used in the following commands:

ED-OTS

RTRV-OTS

WDMANS_PARAM

The following WDMANS_PARAM enum items are added:

WDMANS_PARAM_AMPLMODE => "AMPLMODE"

WDMANS_PARAM_CHLOSS => "CHLOSS"

WDMANS_PARAM_CHPWR => "CHPWR"

WDMANS_PARAM_DITHER => "DITHER"

WDMANS_PARAM_GAIN => "GAIN"

WDMANS_PARAM_HIGHSLVEXP => "HIGHSLVEXP"

WDMANS_PARAM_LOWSLVEXP => "LOWSLVEXP"

WDMANS_PARAM_NTWTYPE => "NTWTYPE"

WDMANS_PARAM_OSCLOSS => "OSCLOSS"

WDMANS_PARAM_POWEROSC => "POWEROSC"

WDMANS_PARAM_RATIO => "RATIO"

WDMANS_PARAM_TILT => "TILT"

WDMANS_PARAM_TOTALPWR => "TOTALPWR"

WDMANS_PARAM_VOAATTN => "VOAATTN"

WDMANS_PARAM is used in the following commands:

DLT-WDMANS

Related Documentation

Release-Specific Documents

Release Notes for the Cisco ONS 15454, Release 9.1

Release Notes for the Cisco ONS 15310-CL, Release 9.1

Release Notes for the Cisco ONS 15310-MA, Release 9.1

Release Notes for the Cisco ONS 15310-MA SDH, Release 9.1

Release Notes for the Cisco ONS 15600, Release 9.1

Release Notes for the Cisco ONS 15600 SDH, Release 9.1

Cisco ONS 15454 Software Upgrade Guide, Release 9.1

Platform-Specific Documents

Cisco ONS 15454 SDH Procedure Guide
Provides installation, turn up, test, and maintenance procedures

Cisco ONS 15454 SDH Reference Manual
Provides technical reference information for SONET/SDH cards, nodes, and networks

Cisco ONS 15454 SDH Troubleshooting Guide
Provides a list of SONET alarms and troubleshooting procedures, general troubleshooting information, and hardware replacement procedures

Cisco ONS 15454 SDH and Cisco ONS 15600 SDH TL1 Command Guide
Provides a comprehensive list of TL1 commands

Cisco ONS 15454 and Cisco ONS 15454 SDH Ethernet Card Software Feature and Configuration Guide
Provides technical reference and configuration information for Ethernet cards.

Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0.