Cisco ONS 15454 SDH TL1 Command Guide, Release 7.0
Chapter 6, CLR Commands
Downloads: This chapterpdf (PDF - 143.0KB) The complete bookPDF (PDF - 11.48MB) | Feedback

CLR Commands

Table Of Contents

CLR Commands

6.1  CLR-COND-SECU


CLR Commands


This chapter provides CLR (clear) commands for the Cisco ONS 15454 SDH.

6.1  CLR-COND-SECU

Clear Security Condition

Usage Guidelines

This command clears the specified standing condition.


Note In Software Release 6.0 and later, only the INTRUSION-PSWD parameter value is supported.


Category

Security

Security

Superuser

Input Format

CLR-COND-SECU:[<TID>]::<CTAG>[::<SECUALMTYPE>];

Input Example

CLR-COND-SECU:CISCO::123::INTRUSION-PSWD:

Input Parameters

Table 6-1 CLR-COND-SECU Input Parameters 

Parameter and Values
Description

SECUALMTYPE

Secure alarm type. Defaults to INTRUSION-PSWD

Parameter type is SECUALMTYPE—security alarm type

•INTRUSION-PSWD

Condition raised after an invalid password is used during login. Condition is raised only if the password is used a specified number of times.