DISC Commands
This chapter provides DISC (disconnect) commands for the Cisco ONS 15454, ONS 15327 and ONS 15600.
9.1 DISC-TACC
Disconnect Test Access
Usage Guidelines
Cisco ONS 15454, ONS 15327, ONS 15600
This command disconnects the TAP and puts the connection back to its original state (no splits). For more information on TACC, refer to the Cisco ONS SONET TL1 Reference Guide.
For this command to be applicable, you must first create the TAP using the ED-<MOD_PATH> command.
Note If you send this command to an already disconnected TAP connection, an SADC error message is returned.
Note If the system cannot release TAP, an SRTN error message is returned.
Category
Troubleshooting and Test Access
Security
Maintenance
Related Commands
CHG-ACCMD-<MOD_TACC> CONN-TACC-<MOD_TACC> EX-SW-<OCN_BLSR> |
OPR-LPBK-<MOD2> RLS-LPBK-<MOD2> |
RTRV-PTHTRC-<PATH> RTRV-TACC |
Input Format
DISC-TACC:[<TID>]:<TAP>:<CTAG>;
Input Example
DISC-TACC:CISCO:8:123;
Input Parameters
Table 9-1 DISC-TACC Input Parameters
|
|
TAP |
The Test Access Path number. TAP number must be an integer with a range of 1 to 999. String Note This command only supports disconnecting one TAP at a time |