Cisco Virtual Network Management Center GUI Configuration Guide, Release 2.1
Configuring VM Managers
Downloads: This chapterpdf (PDF - 1.12MB) The complete bookPDF (PDF - 4.96MB) | Feedback

Configuring VM Managers

Configuring VM Managers

This section includes the following topics:

VM Manager Overview


Note


This feature is not supported on Hyper-V Hypervisor.

VNMC connects to vCenter on port 80. A vCenter extension file is required to establish a connection between VNMC and vCenter. The extension file is exported from VNMC and linked on the VM Managers tab. You install the vCenter extension file as a plugin on all vCenter servers to which you want to connect.

You can configure a VM Manager (vCenter) in VNMC under Administration or Resource Management, depending on your environment and requirements. For more information, see the following topics:

Note


In VMware, a VM can be nested within resources. However, when you view the VM properties in VNMC, only the higher level resource is displayed. For example, you can add a VM that is part of a resource pool that resides in a virtual application (vApp). When you view this VM in VNMC, only the vApp name is displayed and not that of the resource pool.


Configuring VM Managers Under Administration

Adding a VM Manager Under Administration

This procedure describes how to add a VM Manager under Administration. For information on adding a VM Manager under Resource Management, see Adding a VM Manager Under Resource Management.

Before You Begin

A vCenter extension file is required to establish a secure connection between the vCenter and the VM Manager. Export the vCenter extension file by clicking Export vCenter Extension, and installing it as a plugin on all the vCenter servers.

You can find the Export vCenter Extension option in the following locations:
  • Choose Resource Management > Resources > Virtual Machines > VM Managers.
  • Choose Administration > VM Managers > VM Managers.

For detailed information on configuring VNMC connectivity with vCenter, see the Cisco Virtual Network Management Center Quick Start Guide, available at http:/​/​www.cisco.com/​en/​US/​products/​ps11213/​tsd_​products_​support_​series_​home.html.

Procedure
    Step 1   Choose Administration > VM Managers > VM Managers.
    Step 2   Click Add VM Manager.
    Step 3   In the Add VM Manager dialog box, complete the following fields, then click OK:
    Field Description

    Name

    VM Manager name, containing 2 to 256 characters. The name can contain alphanumeric characters, hyphen (-), underscore (_), period (.), and colon (:). You cannot change the name after it is saved.

    Description

    VM Manager description, containing 1 to 256 characters. The description can contain alphanumeric characters, hyphen (-), underscore (_), period (.), and colon (:).

    Hostname/IP Address

    Hostname or IP address of the VM Manager.

    Port Number

    Port to use for communications with the VM Manager.

    After you add a VM Manager, VNMC fetches the VMs available on vCenter with Nexus 1000V port profiles attached, and displays them under Resource Management > Resources > Virtual Machines.


    Editing a VM Manager

    When you edit a VM Manager, you can change its administrative state as long as the VM Manager has the appropriate operational state:
    • To change the administrative state to enabled, the operational state must be down.
    • To change the administrative state to disabled, the operational state must be up.

    If your request to change the administrative state fails, resubmit the request when the system has the correct operational state.

    Procedure
      Step 1   Choose Administration > VM Managers > VM Managers.
      Step 2   In the VM Managers tab, select the VM Manager you want to edit, then click Edit.
      Step 3   In the Edit VM Manager dialog box, edit the information as required, then click OK.
      Field Description

      Name

      VM Manager name (read-only).

      Description

      Description of the VM Manager.

      Hostname/IP Address

      VM Manager hostname or IP address (read-only).

      Port Number

      Port to use for communications with the VM Manager (read-only).

      Admin State

      One of the following administrative states for the VM Manager:
      • enable—When a vCenter is added to VNMC with the administrative state of enable, the system fetches all VM inventory from vCenter. Any changes that occur to the VM on vCenter are also fetched.
      • disable—When a vCenter is added to VNMC with the administrative state of disable, the system displays all discovered VMs from vCenter. Any changes that occur to the VMs on the vCenter are not fetched. The changes will be fetched by VNMC when the admin state is changed to enable.

      Type

      VM Manager vendor (read-only).

      Version

      VM Manager version (read-only).

      Operational State

      One of the following operational states (read-only):
      • up
      • unreachable
      • bad-credentials
      • comm-err
      • admin-down
      • unknown

      Operational State Reason

      Provides the reason for the operational state if the operational state is anything other than up (read-only).


      Deleting a VM Manager

      Procedure
        Step 1   Choose Administration > VM Managers > VM Managers.
        Step 2   In the VM Managers tab, select the VM Manager you want to delete, then click Delete.
        Step 3   When prompted, confirm the deletion.

        Configuring VM Managers Under Resource Management

        Adding a VM Manager Under Resource Management

        This procedure describes how to add a VM Manager under Resource Management. For information on installing a VM Manager under Administration, see Adding a VM Manager Under Administration.

        Before You Begin

        A vCenter extension file is required to establish a secure connection between the vCenter and the VM Manager. Export the vCenter extension file by clicking Export vCenter Extension, and installing it as a plugin on all the vCenter servers.

        You can find the Export vCenter Extension option in the following locations:
        • Choose Resource Management > Resources > Virtual Machines > VM Managers.
        • Choose Administration > VM Managers > VM Managers.

        For detailed information on configuring VNMC connectivity with vCenter, see the Cisco Virtual Network Management Center Quick Start Guide, available at http:/​/​www.cisco.com/​en/​US/​products/​ps11213/​tsd_​products_​support_​series_​home.html.

        Procedure
          Step 1   Choose Resource Management > Resources > Virtual Machines > VM Managers.
          Step 2   Click Add VM Manager.
          Step 3   In the Add VM Manager dialog box, complete the following fields, then click OK:
          Field Description

          Name

          VM Manager name, containing 2 to 256 characters. The name can contain alphanumeric characters, hyphen (-), underscore (_), period (.), and colon (:). You cannot change the name after it is saved.

          Description

          VM Manager description, containing 1 to 256 characters. The description can contain alphanumeric characters, hyphen (-), underscore (_), period (.), and colon (:).

          Hostname/IP Address

          Hostname or IP address of the VM Manager.

          Port Number

          Port to use for communications with the VM Manager.

          After you add a VM Manager, VNMC fetches the VMs available on vCenter with Nexus 1000V port profiles attached, and displays them under Resource Management > Resources > Virtual Machines.


          Editing a VM Manager

          When editing a VM Manager, you can change its administrative state as long as it has the appropriate operational state:
          • To change the administrative state to enabled, the operational state must be down.
          • To change the administrative state to disabled, the operational state must be up.

          If your request to change the administrative state fails, resubmit the request when the system has the correct operational state.

          Procedure
            Step 1   Choose Resource Management > Resources > Virtual Machines > VM Managers.
            Step 2   In the VM Managers tab, select the VM Manager you want to edit, then click Edit.
            Step 3   In the Edit VM Manager dialog box, edit the information as required, then click OK.
            Field Description

            Name

            VM Manager name (read-only).

            Description

            Description of the VM Manager.

            Hostname/IP Address

            VM Manager hostname or IP address (read-only).

            Port Number

            Port to use for communications with the VM Manager (read-only).

            Admin State

            One of the following administrative states for the VM Manager:
            • enable—When a vCenter is added to VNMC with the administrative state of enable, the system fetches all VM inventory from vCenter. Any changes that occur to the VM on vCenter are also fetched.
            • disable—When a vCenter is added to VNMC with the administrative state of disable, the system displays all discovered VMs from vCenter. Any changes that occur to the VMs on the vCenter are not fetched. The changes will be fetched by VNMC when the admin state is changed to enable.

            Type

            VM Manager vendor (read-only).

            Version

            VM Manager version (read-only).

            Operational State

            One of the following operational states (read-only):
            • up
            • unreachable
            • bad-credentials
            • comm-err
            • admin-down
            • unknown

            Operational State Reason

            Provides the reason for the operational state if the operational state is anything other than up (read-only).


            Deleting a VM Manager

            Procedure
              Step 1   Choose Resource Management > Resources > Virtual Machines > VM Managers.
              Step 2   In the VM Managers tab, select the VM Manager you want to delete, then click Delete.
              Step 3   When prompted, confirm the deletion.