Cisco Prime Network Device Package Third-Party VNE Reference Guide, 3.8 and 3.9
VNE Customization Builder
Downloads: This chapterpdf (PDF - 329.0KB) The complete bookPDF (PDF - 12.85MB) | Feedback

VNE Customization Builder

Table Of Contents

VNE Customization Builder

About the VCB

VCB Template Reference

Juniper Template Reference

Module Templates

Event Templates

Alcatel Template Reference

Module Templates

Event Templates

Huawei Template Reference

Module Templates

Event Templates

Tellabs Template Reference

Module Templates

Event Templates

RAD Template Reference

Module Templates

Event Templates

Occam Template Reference

Module Templates

Event Templates


VNE Customization Builder


This chapter introduces the Virtual Network Element Customization Builder (VCB) in Cisco Prime Network (Prime Network).

This chapter contains the following topics:

About the VCB

VCB Template Reference

About the VCB

The VCB is a command-line tool for Prime Network admin users to add—to an installed Prime Network system and for their own support—network elements (NEs), modules, and events, thereby extending what is delivered in Prime Network software. The VCB is installed when you install Prime Network and is targeted at professional service organizations and other power users.

Use the VCB to customize VNE drivers in the installed Prime Network at the customer site for additional discovery and recognition of the following:

Cards—Enable Prime Network to recognize cards that would otherwise be treated as "Unknown".

Syslogs and traps—Enable Prime Network to process a syslog or a trap as a Prime Network event.

Traps in a MIB—Provide MIBs as input to the VCB to produce a list of unsupported traps for a particular MIB, alternatively to produce an editable script to run to add the unsupported traps as Prime Network events.

NE maintenance software—Enable VNE driver to recognize a maintenance software release of a device assuming that the management interface has not changed.

Devices that extend an NE type—Clone from an existing VNE driver to manage new devices which has compatible management interface and fit within an existing supported device family.


Note Prime Network 3.9 supports only Cards and Syslogs/Traps that are associated with managed element.


Use the VCB to create user-defined VNE drivers for discovery of unsupported devices based on U-VNE templates. When using a U-VNE template, you must investigate the management interface instrumentation in the device and determine how closely it matches with those used in the U-VNE template.

Customizations using the VCB affect VNE drivers and update the Prime Network registry in a safe manner. The VCB enables you to roll back easily; you can remove:

All VCB customizations with one command, restoring your system to a factory-defined state.

Selective VCB customizations, using one command per customization that you want to remove.

Because VCB customizations are carried forward during an upgrade to a new version of Prime Network, your customizations continue to override any new or updated VNE drivers or newly supported events and modules. The ability to remove changes selectively enables you to discontinue particular overrides only and take advantage of any newly added support.

Briefly, the VCB works as follows:

You select vcb commands and templates and supply parameters.

The VCB writes extensions into a local registry file, site.xml, thereby avoiding impact on the Prime Network code. You do not need to know a great deal about the Prime Network registry to use the VCB.

You verify the extension using your test resources, such as a simulator

VCB displays the details of the Cisco and the non-Cisco drivers in different tabs in the VCB GUI as Prime Network 3.9 supports separate installation directories and registry service for Cisco and non-Cisco drivers. Non-Cisco VNEs do not support pluggable module specification, and the pluggable module information is retrieved from the network element itself.


Note The Non-Cisco Drivers tab in VCB GUI is displayed only after successful installation of non-Cisco device package in Prime Network.


For more information about VNE Customization Builder, see Cisco Active Network Abstraction 3.9 Customization User Guide.

VCB Template Reference

Module Templates


Note Module templates are applicable to standard modules only (not pluggable modules). You do not need to use a module template to add a pluggable module.


Module templates define a set of port layers—from the connector at Layer 0 to encapsulation at
Layer 2—that are applicable to a module. For example, typical port layers for an OC3 ATM card are:

Layer 0—Fiber Optic

Layer 1—OC-3

Layer 2—ATM

Use module templates to enable developed VNEs to recognize new modules.


Note You cannot add modules to generic U-VNEs.


Module templates ensure that each port is modeled with the correct port layer information based on the ifType obtained from the SNMP MIB output.

Event Templates

Event templates work together to extract information from a syslog or a trap and to generate the keys and the location ID for associating a Prime Network event with a managed element device component.

For more information, see the Cisco Active Network Abstraction 3.9 Customization User Guide.

Module Groups and Module Specification Files


Note Unlike the modeling that Prime Network does for standard modules, Prime Network models only the ports for pluggable modules. The only module group for pluggable modules is the pluggable-ports-spec file. The remainder of this section applies to standard modules only (not pluggable modules).


A module group is the name of a vendor-specific module specification file that is stored in the Prime Network registry. A module specification file is an XML file that lists supported modules and other properties, such as port layers and sysOID. When you use vcb module commands to add, modify, or delete a module:

You provide the name of a module specification file as an argument to the -group option.

The VCB modifies the module specification file: adding, updating, or deleting the module definition.


Note The VCB allows you to update and delete only those modules that you added using the VCB.


Juniper Template Reference

This section contains the following topic:

Module Templates

Event Templates

Module Templates

This section contains the following topics:

Module Groups and Module Specification Files

Module Templates by Technology

For more information, see Module Templates

Module Groups and Module Specification Files

For more information, see Module Groups and Module Specification Files.

Prime Network 3.9 enables you to extend the juniper-junos-physicalspec and juniper-screenos-physicalspec module specification files.

Table 13-1 summarizes the technologies that are supported and the module templates that are provided in the module specification files. For more information about a module template, use the link in the Technologies column.

Table 13-1 Module Group Summary for Standard Modules—Prime Network Version 3.8.x and 3.9.x 

Module Group
Technologies
Template Names

juniper-junos-physicalspec

Ethernet (Fixed)

A10GigaEthernet

gigaEthernet

fxp

ethernet-over-baseband

gigabit ethernet over baseband

gigabit-ethernet-over-fiber

POS (Fixed)

ppp over oc48

POS (Multiloader)

ppp over oc12

ppp over oc192

ppp-over-oc3

Channelized T1/E1 (Fixed)

E3Default

E1

ATM (Fixed)

atmDefault

atm over oc12

atm over ds3

ATM (Multiloader)

layer2-over-ds3

layer2-over-oc12

layer2-over-oc48

layer2-over-oc3

Multitechnology

MultiTechnologiesModuleDefault

 

empty-port-loader

juniper-screenos-physicalspec

Generic

DefaultLoader

Ethernet (Fixed)

SfpGigaEthernetDefault

FastEthernetDefault

 

empty-port-loader


Module Templates by Technology

This section presents module templates organized by technology:

Ethernet (Fixed)

POS (Fixed)

POS (Multiloader)

Channelized T1/E1 (Fixed)

ATM (Fixed)

ATM (Multiloader)

Multitechnology

Generic

Ethernet (Fixed)

Table 13-2 lists module templates for Etherenet (Fixed).

Table 13-2 Module Templates—Ethernet (Fixed) 

Template Name
Layer 0
Layer 1
Layer 2
Examples Modules

A10GigaEthernet

Fiber optic

EthernetCSMA/CD

10 Gigabit Ethernet

PIC:1×10GE(LAN),XENPAK

gigaEthernet

Fiber optic

EthernetCSMA/CD

Gigabit Ethernet

PIC: 10×1GE(LAN)

fxp

RJ45

EthernetCSMA/CD

Ethernet

FPC

ethernet-over-baseband

RJ45

EthernetCSMA/CD

Ethernet

PIC: 4×F/E, 10 BASE-TX

gigabit ethernet over baseband

RJ45

EthernetCSMA/CD

Ethernet

PIC: 2×F/E, 100 BASE-TX

gigabit-ethernet-over-fiber

Fiber optic

EthernetCSMA/CD

Ethernet

PIC: 1×10GE(LAN/WAN) IQ2

SfpGigaEthernetDefault

RJ45

EthernetCSMA/CD

Gigabit Ethernet

Management-Board II, Processing- 8G2

FastEthernetDefault

RJ45

EthernetCSMA/CD

Fast Ethernet

Management-Board II, Processing- 8G2


POS (Fixed)

Table 13-3 lists module templates for POS (Fixed).

Table 13-3 Module Templates—POS (Fixed) 

Template Name
Layer 0
Layer 1
Layer 2
Examples Modules

ppp over oc48

Fiber optic

OC48

PPP

 

POS (Multiloader)

Table 13-4 lists module templates for POS (Multiloader).

Table 13-4 Module Templates—POS (Multiloader) 

Template Name
Layer 0
Layer 1
Layer 2
Examples Modules

ppp over oc12

Fiber optic

OC12

PPP

 

ppp over oc192

Fiber optic

OC192

PPP

PIC: 1×OC-192 SM SR1

ppp-over-oc3

Fiber optic

OC3

PPP

jnxM20QuadSonetOc3


Channelized T1/E1 (Fixed)

Table 13-5 lists module templates for Channelized T1/E1 (Fixed).

Table 13-5 Module Templates—Channelized T1/E1 (Fixed) 

Template Name
Layer 0
Layer 1
Layer 2
Examples Modules

E3 Default

BNC

DS3

-

 

E1

RJ48

DS1

PPP

PIC: 4×E1, RJ48


ATM (Fixed)

Table 13-6 lists module templates for ATM (Fixed).

Table 13-6 Module Templates—ATM (Fixed) 

Template Name
Layer 0
Layer 1
Layer 2
Examples Modules

atmDefault

Fiber optic

OC3

ATM

PIC: 2×OC-3 ATM-II IQ, SMIR

atm over oc12

Fiber optic

OC12

ATM

 

atm over ds3

BNC

DS3

ATM

jnxM20QuadSonetOc3


ATM (Multiloader)

Table 13-7 lists module templates for ATM (Multiloader).

Table 13-7 Module Templates—ATM (Multiloader) 

Template Name
Layer 0
Layer 1
Layer 2
Examples Modules

layer2-over-ds3

BNC

DS3

PPP

HDLC

Frame relay

ATM

PIC: 2×T3

PIC: 10×CHE1 IQ

layer2-over-oc12

Fiber optic

OC12

PPP

HDLC

Frame relay

ATM

PIC: 1×CHOC12 IQ SONET, SMIR

layer2-over-oc48

Fiber optic

OC48

PPP

HDLC

Frame relay

ATM

PIC: 1×STM-16 SDH, SMSR

layer2-over-oc3

Fiber optic

OC3

PPP

HDLC

Frame relay

ATM

PIC: 2×OC-3 SONET, MM


Multitechnology

Table 13-8 lists module templates for Multitechnology.

Table 13-8 Module Templates—Multitechnology 

Template Name
Layer 0
Layer 1
Layer 2
Examples Modules

MultiTechnologiesModuleDefault

RJ11

RJ45

RJ48

Fiber optic

DB60

EthernetCSMA/CD

DS1

E1

OC3

ADSL

Serial

Fast Ethernet

Gigabit Ethernet

PPP

HDLC

Frame relay

ATM

 

Generic

Table 13-9 lists module templates for Generic.

Table 13-9 Module Templates—Generic 

Template Name
Layer 0
Layer 1
Layer 2
Examples Modules

DefaultLoader

RJ45

     

Event Templates

Table 13-10 lists the repositories and parsing rules files for Juniper.

Table 13-10 Parsing Rules and Repositories 

Parsing Rules Files
Repository Files

Select based on the scheme and whether you are adding support for a trap or a syslog:

product scheme:

juniper-syslog-product-parsing-rules

juniper-trap-product-parsing-rules

ipcore scheme:

juniper-syslog-ipcore-parsing-rules

juniper-trap-ipcore-parsing-rules

juniper-netscreen-trap-ipcore-parsing-rules

Select based on whether you are supporting a syslog or a trap:

Syslog:

juniper-syslog-repository

Trap:

juniper-traps-repository

mib2-trap-repository1

juniper-netscreen-trap-repository

1 Select mib2-trap-repository when you are adding a standard MIB-II trap. Otherwise, select juniper-traps-repository.


Alcatel Template Reference

This section contains the following topic:

Module Templates

Event Templates

Module Templates

This section contains the following topics:

Module Groups and Module Specification Files

Module Templates by Technology

For more information, see Module Templates.

Module Groups and Module Specification Files

For more information, see Module Groups and Module Specification Files.

Prime Network 3.8.x and 3.9.x enables you to extend the alcatel-ess-physicalspec, alcatel-sar-physical-spec, alcatel-sr-physical-spec, and alcatelasamphysicalspec module specification files.

Table 13-11 summarizes the technologies that are supported and the module templates that are provided in the module specification files. For more information about a module template, use the link in the Technologies column.

Table 13-11 Module Group Summary for Standard Modules—Prime Network Version 3.8.x and 3.9.x 

Module Group
Technologies
Template Names

alcatel-ess-physicalspec

Ethernet(Fixed)

ethernetDefault

faEthernetDefault

gigaEthernetDefault

Channelized OCXX (Fixed)

OC3-default

OC12-default

OC48-default

 

empty-port-loader

alcatel-sar-physical-spec

Ethernet(Fixed)

ethernetDefault

ethernetRJ48Default

ethernetFiberDefault

faEthernetDefault

faEthernetRJ48Default

faEthernetFiberDefault

gigaRJ48Default

gigaEthernetFiberDefault

gigaEthernetDefault

Channelized OCXX (Fixed)

OC12-default

OC3-default

OC48-default

 

empty-port-loader

alcatel-sr-physical-spec

Ethernet(Fixed)

ethernetDefault

ethernetRJ48Default

ethernetFiberDefault

faEthernetDefault

faEthernetRJ48Default

faEthernetFiberDefault

gigaRJ48Default

gigaEthernetFiberDefault

gigaEthernetDefault

Channelized OCXX (Fixed)

OC12-default

OC3-default

OC48-default

OC192-default

 

empty-port-loader

alcatelasamphysicalspec

Ethernet(Fixed)

117

6

ATM (Fixed)

168

18

19

249

30

39

94

 

empty-port-loader


Module Templates by Technology

This section presents module templates organized by technology:

Ethernet(Fixed)

Channelized OCXX (Fixed)

Ethernet(Fixed)

Table 13-12 lists module templates for Ethernet(Fixed) for Alcatel-Lucent 7450 ESS.

Table 13-12 Module Templates—Ethernet(Fixed) for Alcatel-Lucent 7450 ESS 

Template Name
Layer 0
Layer 1
Layer 2
Examples Modules

ethernetDefault

RJ45

EthernetCSMA/CD

Ethernet

Fast Ethernet

Gigabit Ethernet

MDA 20 Ports 10/100/1000 Ethernet TX

faEthernetDefault

RJ45

EthernetCSMA/CD

Fast Ethernet

MDA 60 Ports 10/100 Ethernet TX

gigaEthernetDefault

Fiber Optic

EthernetCSMA/CD

Gigabit Ethernet

MDA 10 Ports 1-Gigabit Ethernet SFP


Table 13-13 lists module templates for Ethernet(Fixed) for Alcatel-Lucent 7705 SAR.

Table 13-13 Module Templates—Ethernet(Fixed) for Alcatel-Lucent 7705 SAR 

Template Name
Layer 0
Layer 1
Layer 2
Examples Modules

ethernetDefault

RJ45

EthernetCSMA/CD

Ethernet

Fast Ethernet

Gigabit Ethernet

MDA 6 10/100 Ethernet, 2 Port 1-Gigabit SFP

ethernetRJ48Default

RJ48

EthernetCSMA/CD

Ethernet

Fast Ethernet

Gigabit Ethernet

MDA 6 10/100 Ethernet, 2 Port 1-Gigabit SFP

ethernetFiberDefault

Fiber optic

EthernetCSMA/CD

Ethernet

Fast Ethernet

Gigabit Ethernet

MDA 6 10/100 Ethernet, 2 Port 1-Gigabit SFP

faEthernetDefault

RJ45

EthernetCSMA/CD

Fast Ethernet

MDA 6 10/100 Ethernet, 2 Port 1-Gigabit SFP

faEthernetRJ48Default

RJ48

EthernetCSMA/CD

Fast Ethernet

MDA 6 10/100 Ethernet, 2 Port 1-Gigabit SFP

faEthernetFiberDefault

Fiber optic

EthernetCSMA/CD

Fast Ethernet

MDA 6 10/100 Ethernet, 2 Port 1-Gigabit SFP

gigaEthernetDefault

RJ45

EthernetCSMA/CD

Gigabit Ethernet

MDA 6 10/100 Ethernet, 2 Port 1-Gigabit SFP

gigaRJ48Default

RJ48

EthernetCSMA/CD

Gigabit Ethernet

MDA 6 10/100 Ethernet, 2 Port 1-Gigabit SFP

gigaEthernetFiberDefault

Fiber optic

EthernetCSMA/CD

Gigabit Ethernet

MDA 6 10/100 Ethernet, 2 Port 1-Gigabit SFP


Table 13-14 lists module templates for Ethernet(Fixed) for Alcatel-Lucent ATM Subscriber Access Multiplexer.

Table 13-14 Module Templates—Ethernet(Fixed) for Alcatel-Lucent ATM Subscriber Access Multiplexer 

Template Name
Layer 0
Layer 1
Layer 2
Examples Modules

117

RJ45

EthernetCSMA/CD

Gigabit Ethernet

 

6

RJ45

EthernetCSMA/CD

Fast Ethernet

 

ATM (Fixed)

Table 13-15 lists module templates for ATM (Fixed) for Alcatel-Lucent ATM Subscriber Access Multiplexer.

Table 13-15 Module Templates—ATM (Fixed) Alcatel-Lucent ATM Subscriber Access Multiplexer 

Template Name
Layer 0
Layer 1
Layer 2
Examples Modules

169

RJ11

SHDSL

EdgeATM

 

18

BNC

DS1

ATM

 

19

RJ48

DS1

   

249

RJ11

ADSL2

EdgeATM

 

30

BNC

DS3

ATM

 

39

FiberOptic

OC3

ATM

 

94

RJ11

ADSL

EdgeATM

 

Table 13-16 lists module templates for Ethernet(Fixed) for Alcatel-Lucent 7750/7710 SR.

Table 13-16 Module Templates—Ethernet(Fixed) for Alcatel-Lucent 7750/7710 SR 

Template Name
Layer 0
Layer 1
Layer 2
Examples Modules

ethernetDefault

RJ45

EthernetCSMA/CD

Ethernet

Fast Ethernet

Gigabit Ethernet

MDA 10-Port 10/100/1000 Ethernet Extended Performance SFP

ethernetRJ48Default

RJ48

EthernetCSMA/CD

Ethernet

Fast Ethernet

Gigabit Ethernet

MDA 10-Port 10/100/1000 Ethernet Extended Performance SFP

ethernetFiberDefault

Fiber optic

EthernetCSMA/CD

Ethernet

Fast Ethernet

Gigabit Ethernet

MDA 10-Port 10/100/1000 Ethernet Extended Performance SFP

faEthernetDefault

RJ45

EthernetCSMA/CD

Fast Ethernet

MDA 10-Port 10/100/1000 Ethernet Extended Performance SFP

faEthernetRJ48Default

RJ48

EthernetCSMA/CD

Fast Ethernet

MDA 10-Port 10/100/1000 Ethernet Extended Performance SFP

faEthernetFiberDefault

Fiber optic

EthernetCSMA/CD

Fast Ethernet

MDA 10-Port 10/100/1000 Ethernet Extended Performance SFP

gigaEthernetDefault

RJ45

EthernetCSMA/CD

Gigabit Ethernet

MDA 10-Port 10/100/1000 Ethernet Extended Performance SFP

gigaRJ48Default

RJ48

EthernetCSMA/CD

Gigabit Ethernet

MDA 10-Port 10/100/1000 Ethernet Extended Performance SFP

gigaEthernetFiberDefault

Fiber optic

EthernetCSMA/CD

Gigabit Ethernet

MDA 10-Port 10/100/1000 Ethernet Extended Performance SFP


Channelized OCXX (Fixed)

Table 13-17 lists module templates for Channelized OCXX (Fixed) for Alcatel-Lucent 7450 ESS.

Table 13-17 Module Templates—Channelized OCXX (Fixed) for Alcatel-Lucent 7450 ESS

Template Name
Layer 0
Layer 1
Layer 2
Examples Modules

OC3-default

Fiber optic

OC3

-

MDA 16 Ports OC3 SFP

OC12-default

Fiber optic

OC12

-

MDA 16 Ports OC12/OC3 SFP

OC48-default

Fiber optic

OC48

-

MDA 4 Ports OC48 SFP


Table 13-18 lists module templates for Channelized OCXX (Fixed) for Alcatel-Lucent 7705 SAR.

Table 13-18 Module Templates—Channelized OCXX (Fixed) for Alcatel-Lucent 7705 SAR

Template Name
Layer 0
Layer 1
Layer 2
Examples Modules

OC3-default

Fiber optic

OC3

-

MDA 4 Port OC3 SFP

OC12-default

Fiber optic

OC12

-

-

OC48-default

Fiber optic

OC48

-

-

OC192-default

Fiber optic

OC192

-

-


Table 13-19 lists module templates for Channelized OCXX (Fixed) for Alcatel-Lucent 7750/7710 SR.

Table 13-19 Module Templates—Channelized OCXX (Fixed) for Alcatel-Lucent 7750/7710 SR

Template Name
Layer 0
Layer 1
Layer 2
Examples Modules

OC3-default

Fiber optic

OC3

-

MDA 8-Port OC3 SFP

OC12-default

Fiber optic

OC12

-

MDA 4-Port ATM OC12/OC3

OC48-default

Fiber optic

OC48

-

MDA 2 Ports OC48 SFP

OC192-default

Fiber optic

OC192

-

MDA 1-Port OC192


Event Templates

Table 13-20 lists the repositories and parsing rules files for Alcatel.

Table 13-20 Parsing Rules and Repositories 

Parsing Rules Files
Repository Files

Select based on the scheme and whether you are adding support for a trap or a syslog:

product scheme:

alcatel-ess-syslog-product-parsing-rules

alcatel-ess-trap-product-parsing-rules

alcatel-sar-syslog-product-parsing-rules

alcatel-sar-trap-product-parsing-rules

alcatel-sr-syslog-ipcore-parsing-rules

alcatel-sr-trap-ipcore-parsing-rules

alcatel-asam-trap-product-parsing-rules

Select based on whether you are supporting a syslog or a trap:

Trap:

alcatel-7450-trap-repository

alcatel-7705-trap-repository

alcatel-7750/7710-trap-repository

mib2-trap-repository1

alcatel-trap-repository

1 Select mib2-trap-repository when you are adding a standard MIB-II trap. Otherwise, select alcatel-7450-trap-repository.


Huawei Template Reference

This section contains the following topic:

Module Templates

Event Templates

Module Templates

This section contains the following topics:

Module Groups and Module Specification Files

Module Templates by Technology

For more information, see Module Templates.

Module Groups and Module Specification Files

For more information, see Module Groups and Module Specification Files.

Prime Network 3.9 enables you to extend the huawei-trs-physicalspec module specification files.

Table 13-21 summarizes the technologies that are supported and the module templates that are provided in the module specification files. For more information about a module template, use the link in the Technologies column.

Table 13-21 Module Group Summary for Standard Modules—Prime Network Version 3.8.x and 3.9.x 

Module Group
Technologies
Template Names

huawei-trs-physicalspec

Ethernet(Fixed)

ethernetDefault

ethernet-default-over-optic

gigaEthernetDefault

A10GigaEthernet

ethernetFiberDefault

gigaEthernet

ethernetDefault1

fastEthernetFiberDefault

gigaEthernetFiberDefault

fastEthernetDefault

Ethernet (Multiloader)

E1OrEthOrGig

Channelized T1/E1

E1Default

ATM (Fixed)

DS1Default

AtmDefault

POS (Fixed)

FiberDefault-pos

FiberDefault-pos-ppp

Generic

generic-port

Multitechnology

MultiTechnologiesModuleDefault

 

empty-port-loader


Module Templates by Technology

This section presents module templates organized by technology:

Ethernet(Fixed)

Ethernet (Multiloader)

Channelized T1/E1

ATM (Fixed)

POS (Fixed)

Generic

Multitechnology

Ethernet(Fixed)

Table 13-22 lists module templates for Ethernet(Fixed).

Table 13-22 Module Templates—Ethernet(Fixed) 

Template Name
Layer 0
Layer 1
Layer 2
Examples Modules

ethernetDefault

RJ45

EthernetCSMA/CD

Ethernet

Fast Ethernet

10 Gigabit Ethernet

Gigabit Ethernet

 

ethernet-default-over-optic

Fiber optic

EthernetCSMA/CD

Ethernet

Fast Ethernet

10 Gigabit Ethernet

Gigabit Ethernet

G24SC

gigaEthernetDefault

RJ45

Ethernet CSMA/CD

Gigabit Ethernet

AND1EG2

A10GigaEthernet

Fiber optic

Ethernet CSMA/CD

10 Gigabit Ethernet

CR52L2XXNB

ethernetFiberDefault

Fiber optic

Ethernet CSMA/CD

Ethernet

CR52EEGFNB

gigaEthernet

Fiber optic

Ethernet CSMA/CD

Gigabit Ethernet

 

ethernetDefault1

RJ45

Ethernet CSMA/CD

Ethernet

AND1VIRCARD

fastEthernetFiberDefault

Fiber optic

Ethernet CSMA/CD

Ethernet

CR52EEGFNB

gigaEthernetFiberDefault

Fiber optic

Ethernet CSMA/CD

Gigabit Ethernet

CR52EEGFNB

fastEthernetDefault

RJ45

Ethernet CSMA/CD

Fast Ethernet

AND1VIRCARD


Ethernet (Multiloader)

Table 13-23 lists module templates for Ethernet (Multiloader).

Table 13-23 Module Templates—Ethernet (Multiloader) 

Template Name
Layer 0
Layer 1
Layer 2
Examples Modules

E1OrEthOrGig

RJ45

E1

   

Channelized T1/E1

Table 13-24 lists module templates for Channelized T1/E1.

Table 13-24 Module Templates—Channelized T1/E1 

Template Name
Layer 0
Layer 1
Layer 2
Examples Modules

E1Default

RJ45

E1

 

AND1VIRCARD


ATM (Fixed)

Table 13-25 lists module templates for ATM (Fixed).

Table 13-25 Module Templates—ATM (Fixed) 

Template Name
Layer 0
Layer 1
Layer 2
Examples Modules

DS1Default

DS1 connector

DS1

 

AND1VIRCARD

AtmDefault

Fiber optic

OC3

ATM

CR53A4CF


POS (Fixed)

Table 13-26 lists module templates for POS (Fixed).

Table 13-26 Module Templates—POS (Fixed) 

Template Name
Layer 0
Layer 1
Layer 2
Examples Modules

FiberDefault-pos

Fiber optic

OC3

PPP

CX67C1CF0

FiberDefault-pos-ppp

Fiber optic

OC3

PPP

CR53P8CF


Generic

Table 13-27 lists module templates for Generic.

Table 13-27 Module Templates—Generic 

Template Name
Layer 0
Layer 1
Layer 2
Examples Modules

generic-port

POS Connector

Generic Layer 1

Generic Layer 2

 

Multitechnology

Table 13-28 lists module templates for Multitechnology.

Table 13-28 Module Templates—Multitechnology 

Template Name
Layer 0
Layer 1
Layer 2
Examples Modules

MultiTechnologiesModuleDefault

RJ11

RJ45

RJ48

Fiber optic

DB60

EthernetCSMA/CD

DS1

E1

OC3

ADSL

Serial

Fast Ethernet

Gigabit Ethernet

PPP

HDLC

Frame relay

ATM

 

Event Templates

Table 13-29 lists the repositories and parsing rules files for Huawei.

Table 13-29 Parsing Rules and Repositories 

Parsing Rules Files
Repository Files

Select based on the scheme and whether you are adding support for a trap or a syslog:

product scheme:

huawei-trs-trap-ipcore-parsing-rules

Select based on whether you are supporting a syslog or a trap:

Trap:

mib2-trap-repository1

huawei-trap-repository

1 Select mib2-trap-repository when you are adding a standard MIB-II trap. Otherwise, select alcatel-7450-trap-repository.


Tellabs Template Reference

This section contains the following topic:

Module Templates

Event Templates

Module Templates

This section contains the following topics:

Module Groups and Module Specification Files

Module Templates by Technology

For more information, see Module Templates.

Module Groups and Module Specification Files

For more information, see Module Groups and Module Specification Files.

Prime Network Version 3.8.x and 3.9.x enables you to extend the tellabs-msr-physicalspec module specification files.

Table 13-30 summarizes the technologies that are supported and the module templates that are provided in the module specification files. For more information about a module template, use the link in the Technologies column.

Table 13-30 Module Group Summary for Standard Modules—Prime Network Version 3.8.x and 3.9.x 

Module Group
Technologies
Template Names

tellabs-msr-physicalspec

Ethernet(Fixed)

A10GigaEthernet

GigabitEthernetDefault

FastEthernetDefault

ATM (Fixed)

E3Default

ADSL2Default

DS1Default

SHDSLDefault

Generic

DefaultLoader

 

empty-port-loader


Module Templates by Technology

This section presents module templates organized by technology:

Ethernet(Fixed)

ATM (Fixed)

Generic

Ethernet(Fixed)

Table 13-31 lists module templates for Ethernet(Fixed).

Table 13-31 Module Templates—Ethernet(Fixed) 

Template Name
Layer 0
Layer 1
Layer 2
Examples Modules

A10GigaEthernet

Fiber optic

EthernetCSMA/CD

10 Gigabit Ethernet

 

GigabitEthernetDefault

Fiber optic

EthernetCSMA/CD

Gigabit Ethernet

 

FastEthernetDefault

RJ45

EthernetCSMA/CD

Fast Ethernet

 

ATM (Fixed)

Table 13-32 lists module templates for ATM (Fixed).

Table 13-32 Module Templates—ATM (Fixed) 

Template Name
Layer 0
Layer 1
Layer 2
Examples Modules

ADSL2Default

RJ45

ADSL2

   

DS1Default

RJ45

DS1

ATM

 

E3Default

BNC

DS3

   

SHDSLDefault

RJ45

SHDSL

EdgeATM

 

Generic

Table 13-33 lists module templates for Generic.

Table 13-33 Module Templates—Generic 

Template Name
Layer 0
Layer 1
Layer 2
Examples Modules

DefaultLoader

RJ45

     

Event Templates

Table 13-34 lists the repositories and parsing rules files for Tellabs.

Table 13-34 Parsing Rules and Repositories 

Parsing Rules Files
Repository Files

Select based on the scheme and whether you are adding support for a trap or a syslog:

product scheme:

tellabs-msr-trap-product-parsing-rules

Select based on whether you are supporting a syslog or a trap:

Trap:

tellabs-trap-repository

tellabs-msr-trap-repository

mib2-trap-repository1

1 Select mib2-trap-repository when you are adding a standard MIB-II trap. Otherwise, select alcatel-7450-trap-repository.


RAD Template Reference

This section contains the following topic:

Module Templates

Event Templates

Module Templates

This section contains the following topics:

Module Groups and Module Specification Files

Module Templates by Technology

For more information, see Module Templates.

Module Groups and Module Specification Files

For more information, see Module Groups and Module Specification Files.

Prime Network Version 3.8.x and 3.9.x enables you to extend the rad-ace-csg-physicalspec, rad-etx-physicalspec, rad-ipmux-physicalspec, and rad-la-physicalspec module specification files.

Table 13-35 summarizes the technologies that are supported and the module templates that are provided in the module specification files. For more information about a module template, use the link in the Technologies column.

Table 13-35 Module Group Summary for Standard Modules—Prime Network Version 3.8.x and 3.9.x 

Module Group
Technologies
Template Names

rad-ace-csg-physicalspec

Ethernet(Fixed)

FastEthernetDefault

EthernetDefault

gigaEthernetDefault

ATM (Fixed)

ADSL2Default

DS1Default

SHDSLDefault

Generic

DefaultLoader

 

empty-port-loader

rad-etx-physicalspec

Ethernet(Fixed)

gigaEthernetDefault

FastEthernetDefault

EthernetDefault

SfpOrUtpEthernetDefault

SfpOrUtpFastEthernetDefault

SfpOrUtpGigaEthernetDefault

ATM (Fixed)

DS1Default

Generic

DefaultLoader

 

empty-port-loader

rad-ipmux-physicalspec

Ethernet(Fixed)

EthernetDefault

FastEthernetDefault

gigaEthernetDefault

ATM (Fixed)

DS1Default

Generic

DefaultLoader

 

empty-port-loader

rad-la-physicalspec

Ethernet(Fixed)

EthernetDefault

FastEthernetDefault

gigaEthernetDefault

ATM (Fixed)

SHDSLDefault

Generic

DefaultLoader

 

empty-port-loader


Module Templates by Technology

This section presents module templates organized by technology:

Ethernet(Fixed)

ATM (Fixed)

Generic

Ethernet(Fixed)

Table 13-36 lists module templates for Ethernet(Fixed) for RAD.

Table 13-36 Module Templates—Ethernet(Fixed) for RAD 

Template Name
Layer 0
Layer 1
Layer 2
Examples Modules

FastEthernetDefault

RJ45

EthernetCSMA/CD

Fast Ethernet

 

EthernetDefault

RJ45

EthernetCSMA/CD

Ethernet

 

gigaEthernetDefault

RJ45

EthernetCSMA/CD

Gigabit Ethernet

SfpOrUtpGigaEthernetDefault

 

ATM (Fixed)

Table 13-37 lists module templates for ATM (Fixed) for RAD ATM Subscriber Access Multiplexer.

Table 13-37 Module Templates—ATM (Fixed) for RAD

Template Name
Layer 0
Layer 1
Layer 2
Examples Modules

ADSL2Default

RJ45

ADSL2

ATM

 

DS1Default

RJ45

DS1

ATM

 

SHDSLDefault

RJ45

SHDSL

EdgeATM

 

Generic

Table 13-38 lists module templates for Generic for RAD.

Table 13-38 Module Templates—Generic RAD

Template Name
Layer 0
Layer 1
Layer 2
Examples Modules

DefaultLoader

RJ45

     

Event Templates

Table 13-39 lists the repositories and parsing rules files for RAD.

Table 13-39 Parsing Rules and Repositories 

Parsing Rules Files
Repository Files

Select based on the scheme and whether you are adding support for a trap or a syslog:

Product Scheme:

rad-etx-syslog-product-parsing-rules

rad-etx-trap-product-parsing-rules

rad-ipmux-syslog-product-parsing-rules

rad-ipmux-trap-product-parsing-rules

rad-la-syslog-product-parsing-rules

rad-la-trap-product-parsing-rules

rad-csg-syslog-product-parsing-rules

rad-csg-trap-product-parsing-rules

Select based on whether you are supporting a syslog or a trap:

Trap:

rad-etx-trap-repository

rad-trap-repository

rad-ipmux-trap-repository

rad-la-trap-repository

rad-csg-trap-repository


Occam Template Reference

This section contains the following topic:

Module Templates

Event Templates

Module Templates

This section contains the following topics:

Module Groups and Module Specification Files

Module Templates by Technology

For more information, see Module Templates.

Module Groups and Module Specification Files

For more information, see Module Groups and Module Specification Files.

Prime Network Version 3.8.x and 3.9.x enables you to extend the occam-blc-physicalspec module specification files.

Table 13-40 summarizes the technologies that are supported and the module templates that are provided in the module specification files. For more information about a module template, use the link in the Technologies column.

Table 13-40 Module Group Summary for Standard Modules—Prime Network Version 3.8.x and 3.9.x 

Module Group
Technologies
Template Names

occam-blc-physicalspec

Ethernet(Fixed)

FiberOpticEthernetDefault

FiberOpticOrPluggableEthernetDefault

UTPEthernetDefault

ATM (Fixed)

ADSL2Default

Generic

DefaultLoader

 

empty-port-loader


Module Templates by Technology

This section presents module templates organized by technology:

Ethernet(Fixed)

ATM (Fixed)

Generic

Ethernet(Fixed)

Table 13-41 lists module templates for Ethernet(Fixed) for Occam.

Table 13-41 Module Templates—Ethernet(Fixed) for RAD 

Template Name
Layer 0
Layer 1
Layer 2
Examples Modules

UTPEthernetDefault

RJ45

EthernetCSMA/CD

Ethernet

 

FiberOpticEthernetDefault

FiberOptic

EthernetCSMA/CD

Gigabit Ethernet

 

FiberOpticOrPluggableEthernetDefault

FiberOptic

EthernetCSMA/CD

Gigabit Ethernet

 

ATM (Fixed)

Table 13-42 lists module templates for ATM (Fixed) for Occam.

Table 13-42 Module Templates—ATM (Fixed) for RAD

Template Name
Layer 0
Layer 1
Layer 2
Examples Modules

ADSL2Default

RJ45

ADSL2

ATM

 

Generic

Table 13-43 lists module templates for Generic for Occam.

Table 13-43 Module Templates—Generic Occam

Template Name
Layer 0
Layer 1
Layer 2
Examples Modules

DefaultLoader

RJ45

     

Event Templates

Table 13-44 lists the repositories and parsing rules files for Occam.

Table 13-44 Parsing Rules and Repositories 

Parsing Rules Files
Repository Files

Select based on the scheme and whether you are adding support for a trap or a syslog:

Product Scheme:

occam-trap-product-parsing-rules.xml

Select based on whether you are supporting a syslog or a trap:

Trap:

occam-trap-repository.xml