Cisco Prime Network Device Package Third-Party VNE Reference Guide, 3.8 and 3.9
Support Information for Tellabs Devices
Downloads: This chapterpdf (PDF - 177.0KB) The complete bookPDF (PDF - 12.85MB) | Feedback

Support Information for Tellabs Devices

Table Of Contents

Support Information for Tellabs Devices

Tellabs 8840 Multiservice Router

Tellabs 8840 Multiservice Router—Supported Software Versions

Tellabs 8840 Multiservice Router—Supported Topologies

Tellabs 8840 Multiservice Router—Supported Modules

Tellabs 8840 Multiservice Router—Supported Technologies

Tellabs 8840 Multiservice Router—Supported Service Events

Supported Technologies on Tellabs Devices

IP

Routing Protocols

Ethernet

MPLS

MPLS-TE

Hardware

Serial

ATM

SONET/SDH

BFD


Support Information for Tellabs Devices


This chapter contains support information for Virtual Network Elements (VNEs) that manage Tellabs devices in Prime Network Version 3.8.x and 3.9.x. For more information about the objects and attributes described in this chapter, see the Cisco Prime Network 3.9 Reference Guide.

This chapter contains the following topics:

Tellabs 8840 Multiservice Router

Supported Technologies on Tellabs Devices

Tellabs 8840 Multiservice Router

This section includes the following information about Tellabs 8840 Multiservice Router devices (for information on the NE types supported in Prime Network Version 3.8.x and 3.9.x, see Tellabs 8840 Multiservice Router):

Tellabs 8840 Multiservice Router—Supported Software Versions

Tellabs 8840 Multiservice Router—Supported Topologies

Tellabs 8840 Multiservice Router—Supported Modules

Tellabs 8840 Multiservice Router—Supported Technologies

Tellabs 8840 Multiservice Router—Supported Service Events

Tellabs 8840 Multiservice Router—Supported Software Versions

Table 10-1 Supported Software Versions for Tellabs 8840 Multiservice Router—Prime Network Version 3.8.x and 3.9.x 

TMOS 7.0.0.3

3.7.2

6.0

TMOS 8.1.0.1

3.7.2

6.0

TMOS 8.1.0.1a

3.7.2

6.0

TMOS 8.1.0.1b

3.8.x-To-3.9.x

DP1206


Tellabs 8840 Multiservice Router—Supported Topologies

Table 10-2 Supported Topologies for Tellabs 8840 Multiservice Router—Prime Network Version 3.8.x and 3.9.x  

Topology Type
Link Type

Ethernet

Ethernet

3.7.2

6.0

MPLS

MPLS

3.7.2

6.0

Physical Layer

Physical Layer

3.7.2

6.0


Tellabs 8840 Multiservice Router—Supported Modules

Table 10-3 Supported Modules for Tellabs 8840 Multiservice Router—Prime Network Version 3.8.x and 3.9.x 

Module Name
Module Description

Tellabs 8840 Multi-Service Router Base Unit

3.7.2

Tellabs Multi-Service Router 8840

6.0

81.88X0-ULC-2

3.7.2

Tellabs 88X0 9M Universal Line Card (ULC)

6.0

Switch Control Card

3.7.2

Switch Control Card

6.0

81.8800-PLM 003C-30

3.7.2

4 PORT Oc-3c(155Mbps) concatenated long reach 40kms

6.0

81.8800-PLM 012C-20

3.7.2

4 PORT 622Mbps OC-12c MS SMF IR concatenated intermediate 15 kms

6.0

81.8800-PLM048C-10

3.7.2

1 PORT 2.5Gbps OC-48c MS SMF IR concatenated intermediate 2 kms

6.0

81.8800-PLMGE-20

3.7.2

4port Gigabit Ethernet PLM - 1000BaseLX (Includes 4 LC/SFP optics) 550 meters

6.0

81.8800-PLM10GE-40

3.7.2

1port 10Gigabit Ethernet PLM SMF LR(LAN PHY) 40Kms

6.0

4 port Gigabit Ethernet PLM LX

3.7.2

4 port Gigabit Ethernet PLM LX

6.0

2 port OC-3STM-1 SMF IR

3.7.2

2 port OC-3STM-1 SMF IR

6.0

4port OC-3/STM-1 TDM MSPLM SMFIR

3.7.2

4port OC-3/STM-1 TDM MSPLM SMFIR

6.0

1port OC-48C/STM-16c TDM MSPLM SMF IR

3.7.2

1port OC-48C/STM-16c TDM MSPLM SMF IR

6.0

1 port 9M 10GiG ENET SMF LR

3.7.2

1 port 9M 10GiG ENET SMF LR

6.0

82.88X0-ULC-3-R5

3.8.x-To-3.9.x

ULC_with_36M_CAM

DP1206

81.8800-PLM003C-30

3.8.x-To-3.9.x

4Port_OC-3C/STM-1_MSPLM_LR

DP1206

81.8800-PLMTE3A-10

3.8.x-To-3.9.x

6port-DS3E3_Clear_Channel_W/ATM

DP1206

81.88X0ELCA-R5

3.8.x-To-3.9.x

12_PORT_GE_ELC_88X0_NO_OPTICS

DP1206

81.88X0ELCB-R5

3.8.x-To-3.9.x

1_PORT_10GE_ELC_LAN/WAN_88X0_NO_OPTICS

DP1206

81.88X0LCA-R5

3.8.x-To-3.9.x

Line_Card_Adapter_for_ELC

DP1206

82.88X0PLML-R5

3.8.x-To-3.9.x

10GIGE_LAN_ULC-3_-_XFP_NO_OPTIC_PLUG

DP1206

81.8800-XFP-SR1

3.8.x-To-3.9.x

1P 10GE, SR-1, LC/XFP, SMF Optics Plug, 1310 nm, 12 km

DP1206

81.8800-XFP-IR2

3.8.x-To-3.9.x

1P 10GE, IR-2, LC/XFP, SMF Optics Plug, 1550 nm, 40 km

DP1206

81.8800-XFP-LR2

3.8.x-To-3.9.x

1P 10GE, LR-2, LC/XFP, SMF Optics Plug, 1550 nm, 80 km

DP1206


Tellabs 8840 Multiservice Router—Supported Technologies

The following technologies are supported by the Tellabs 8840 Multiservice Router in Prime Network Version 3.8.x and 3.9.x:

IP

Routing Protocols

Ethernet

MPLS

MPLS-TE

Hardware

Serial

ATM

SONET/SDH

BFD

Tellabs 8840 Multiservice Router—Supported Service Events

Table 10-4 Supported Service Events for Tellabs 8840 Multiservice Router—Prime Network Version 3.8.x and 3.9.x 

Event Name

All IP Interfaces Down / Active IP Interfaces Found

3.7.2

 

6.0

Interface Status Down/Up

3.7.2

 

6.0

Card In/Out

3.7.2

 

6.0

Link Down/Up

3.7.2

 

6.0

Device Unreachable

3.7.2

 

6.0

CPU Over Utilized

3.7.2

 

6.0

Memory Over Utilized

3.7.2

 

6.0

Device Unsupported

3.7.2

 

6.0

Discard Packets

3.7.2

 

6.0

Dropped Packets

3.7.2

 

6.0

Module Unsupported

3.7.2

 

6.0

Port Flapping

3.7.2

 

6.0

Port Down

3.7.2

 

6.0

Rx Over Utilized

3.7.2

 

6.0

Tx Over Utilized

3.7.2

 

6.0

Card Up/Down

3.7.2

 

6.0


Supported Technologies on Tellabs Devices

The following sections list the objects and attributes that are supported on Tellabs devices in

Prime Network Version 3.8.x and 3.9.x per technology:

IP

Routing Protocols

Ethernet

MPLS

MPLS-TE

Hardware

Serial

ATM

SONET/SDH

BFD

IP

The following table (Table 10-5) lists the ip protocols attributes that are supported on Tellabs devices in Prime Network Version 3.8.x and 3.9.x per technology:

Table 10-5 IP Attribute Support on Tellabs 8840 Multiservice Router Devices—Prime Network Version 3.8.x and 3.9.x 

Attributes

IMO Name—IIPInterface

IP Address

Y

Subnetwork Mask

Y

IP Interface Addresses Array

Y

Interface Name

Y

IP Interface State

Y

Interface Description

Y

IMO Name—IRoutingEntity

Routing Table

Y

ARP Entity

Y

Name

Y

Logical Sons

Y

IMO Name—IRoutingEntry

Destination IP Subnet

Y

Next Hop IP Address

Y

Type

Y

Routing Protocol Type

Y

Outgoing Interface Name

Y

IMO Name—IARPEntity

ARP Table

Y

IMO Name—IARPEntry

IP Address

Y

MAC Address

Y

Port

Y

Entry Type

Y


Routing Protocols

The following table (Table 10-6) lists the routing protocols attributes that are supported on Tellabs devices in Prime Network Version 3.8.x and 3.9.x per technology:

Table 10-6 Routing Protocols Attribute Support on Tellabs 8840 Multiservice Router Devices—Prime Network Version 3.8.x and 3.9.x 

Attributes

IMO Name—IOspfEntry

Area Identifier

Y

IP Address

Y

Type

Y

Administrative Status

Y

Ospf Entry State

Y


Ethernet

The following table (Table 10-7) lists the ethernet attributes that are supported on Tellabs devices in Prime Network Version 3.8.x and 3.9.x per technology:

Table 10-7 Ethernet Attribute Support on Tellabs 8840 Multiservice Router Devices—Prime Network Version 3.8.x and 3.9.x 

Attribute
IMO Name—IEthernet

MAC Address

Y

Duplex Mode

Y

isElmiEnabled

Y


MPLS

The following table (Table 10-8) lists the mpls attributes that are supported on Tellabs devices in Prime Network Version 3.8.x and 3.9.x per technology:

Table 10-8 MPLS Attribute Support on Tellabs 8840 Multiservice Router Devices—Prime Network Version 3.8.x and 3.9.x 

Attributes

IMO Name—ILdpPeer

Peer Identification

Y

Transport Address

Y

Distribution Method

Y

Protocol Type

Y

Path Vector Limi

Y

Session Status

Y

Protocol Version

Y

Hold Time

Y

Keep Alive Time

Y

Peer Discovery Sources

Y

IMO Name—IMpls

Distribution Protocol

Y

IMO Name—ILse

Logical Sons

Y

IMO Name—ILdpService

LDP Peers

Y

IMO Name—IMplsEntry

Incoming Label

Y

Outgoing Interface and Label

Y

Switching Action

Y

Next Hop IP Address

Y

Destination Mask

Y

Destination address

Y


MPLS-TE

The following table (Table 10-9) lists the mpls-te attributes that are supported on Tellabs devices in Prime Network Version 3.8.x and 3.9.x per technology:

Table 10-9 MPLS-TE Attribute Support on Tellabs 8840 Multiservice Router Devices—Prime Network Version 3.8.x and 3.9.x 

Attributes

IMO Name—IMplsTETunnel

Destination Address

Y

Outgoing Interface and Label

Y

LSP Identification

Y

Requested Bandwidth

Y

Measured Average Burst and Peak Bandwidth

Y

Setup and Hold Priority

Y

Affinity Bits and Mask

Y

Automatic Route Announcement Status

Y

Optimization Lock Down Status

Y

Path Option

Y

Name

Y

Description

Y

Administrative Status

Y

Operational Status

Y

IANA Type

Y

IMO Name—IMplsTEProperties

Administrative Weight

Y

Attributes Identifier

Y

Signaling Protocol

Y

Available Physical and Reservable Bandwidth

Y

Reserved Bandwidth

Y

IMO Name—IMplsTEPropertiesAllocationEntry

Priority Level

Y

Allocated and Cumulative Bandwidth

Y

IMO Name—IMplsTESegment

Segment Type

Y

Measured Average Burst and Peak Bandwidth

Y

LSP Identification

Y

Name

Y

AverageBandwidth

Y

In Interface

Y

Out interface

Y

In Label

Y

Out Label

Y

Source address

Y

Destination address

Y


Hardware

The following table (Table 10-10) lists the hardware attributes that are supported on Tellabs devices in Prime Network Version 3.8.x and 3.9.x per technology:

Table 10-10 Physical Equipment Attribute Support on Tellabs 8840 Multiservice Router Devices—Prime Network Version 3.8.x and 3.9.x 

Attributes

IMO Name—IChassis

Description

Y

Equipment Holder Type

Y

Serial Number

Y

IMO Name—IModule

Module Name

Y

Module Description

Y

Software Version

Y

Operational Status

Y

Hardware Type & Version

Y

Serial Number (soft property)

Y

Slots Number

Y

IMO Name—IManagedElement

IP Address

Y

Communication State

Y

Investigation State

Y

Element Category

Y

Element Type and Key

Y

Device Name

Y

Device Series

Y

System Name

Y

System Description

Y

Up Time

Y

Software Version

Y

Vendor Identity

Y

Sys Contact

Y

Sys Location

Y


Serial

The following table (Table 10-11) lists the serial attributes that are supported on Tellabs devices in Prime Network Version 3.8.x and 3.9.x per technology:

Table 10-11 Serial Attribute Support on Tellabs 8840 Multiservice Router Devices—Prime Network Version 3.8.x and 3.9.x 

Attributes

IMO Name—IPhysicalLayer

Media Type

Y

Clocking Source

Y

Maximum Speed

Y

Is Internal Port

Y

Discarded and Received Input Data Counters

Y

Dropped and Forward Output Data Counters

Y

Administrative Status

Y

Operational Status

Y

Last Changed

Y

IANA Type

Y

Port Alias

Y

Location

Y

Sending Alarms

Y

Connector Description

Y

Status

Y

Managed

Y


ATM

The following table (Table 10-12) lists the atm attributes that are supported on Tellabs devices in Prime Network Version 3.8.x and 3.9.x per technology:

Table 10-12 ATM Attribute Support on Tellabs 8840 Multiservice Router Devices—Prime Network Version 3.8.x and 3.9.x 

Attributes

IMO Name—IAtmTrafficDescriptor

Traffic Descriptor Type

Y

Service Category

Y

Cell Loss Priority

Y

Cell Delay Variation

Y

Cell Delay Variation Tolerance

Y

Index

Y


SONET/SDH

The following table (Table 10-13) lists the sonet/sdh attributes that are supported on Tellabs devices in Prime Network Version 3.8.x and 3.9.x per technology:

Table 10-13 SONET/SDH Attribute Support on Tellabs 8840 Multiservice Router Devices—Prime Network Version 3.8.x and 3.9.x 

Attributes

IMO Name—ISonetSdh

Clocking

Y


BFD

The following table (Table 10-14) lists the sonet/sdh attributes that are supported on Tellabs devices in Prime Network Version 3.8.x and 3.9.x per technology:

Table 10-14 BFD Attribute Support on Tellabs 8840 Multiservice Router Devices—Prime Network Version 3.8.x and 3.9.x 

Attributes

IMO Name—IBfdSession

SourceIp

Y

DestinationIp

Y

Interval

Y

Multiplier

Y

Protocol

Y

State

Y

Interface

Y