The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This chapter explains the following:
The Threshold Settings page shows the criteria of threshold parameters like CPU Usage, Virtual Memory, Disk Usage, Unregistered Endpoints, Unregistered Gateways, and Unregistered Media Resources in percentile.
Threshold settings in the table shows default values and you can choose to override these default values and define which parameter you want to call as how critical. The data you set here reflects the data shown in the dashboard.
You can view the rules below. When you enter an invalid data the severity appears in the field.
Severity |
Description |
---|---|
Critical |
Critical Min threshold should be greater than or equal to Warning Max threshold. |
Information |
Information Max threshold should be less than Warning Min threshold. |
Warning-Max Threshold |
Warning Max threshold should be less than Critical Max threshold and greater than Warning Min threshold. |
Warning-Min threshold |
Warning Min threshold should be greater than or equal to Information Min threshold and less than Warning Max threshold. |
The table lists the default Threshold Criteria.
Criteria |
Range |
---|---|
Critical |
Greater than or equal to 70% and less than 100% |
Warning |
Greater than or equal to 50% and less than 70% |
Information |
Greater than or equal to 0% and less than 50% |
Note | Any custom range specified must be continuous and must not overlap. For example, Critical range - 80 to 100 and Warning range - 60 to 70 is not valid. |