Support and Troubleshooting Commands
This chapter contains the command-line interface (CLI) commands that you can use to support troubleshooting for the Prime Cable Provisioning Device Provisioning Engine (DPE).
The commands described in this chapter include:
clear bundles
Use the clear bundles command to clear existing archived bundles on the DPE. These bundles, which you create using the support bundle cache command, normally contain archived logs and archived state information, which are of use to the Cisco Technical Assistance Center.
Caution
Before using the
clear bundles command, ensure that you retrieve all bundles because you will lose the archived state.
Once you enter this command, a prompt appears to indicate that the bundles are being cleared. When bundling is complete, the amount of disk space cleared (in bytes) appears.
Syntax Description
No keywords or arguments.
Defaults
No default behavior or values.
Examples
This result occurs when existing archived bundles are cleared.
Clearing Cisco support bundles...
This result occurs when there are no archived bundles to clear.
Clearing Cisco support bundles...
show bundles
Use the show bundles command to display the bundles currently available in the outgoing directory. The bundles, which you create using the support bundle cache command, are accessible from the FTP server of the DPE.
This command identifies the bundles that are archived. If there are no bundles, a prompt appears indicating that no bundles are available.
Syntax Description
No keywords or arguments.
Defaults
No default behavior or values.
Examples
This result occurs when bundles are archived.
outgoing/state-20070608-043109.bpr
outgoing/cache-20070608-043150.bpr
This result occurs when there are no archived bundles.
No bundles currently available.
support bundle cache
Use the support bundle cache command to bundle the current DPE cache. This command is useful when archiving the cache for delivery to the Cisco Technical Assistance Center. Once the bundle is created, it is available from the outgoing directory of the FTP server.
After the command creates the cache bundle, it displays the bundle specifics, including the compressed size of the bundle file.
Syntax Description
No keywords or arguments.
Defaults
No default behavior or values.
Examples
bac_dpe# support bundle cache
Creating cache bundle for Cisco support...
+ outgoing/cache-20071008-070730.bpr
+ Adding & compressing DPE cache...