The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
The geo map enables you to position your network devices on a world map and monitor them within their geographical context. The displayed world map is either imported by accessing the map provider's site over the internet (online mode) or from locally installed map resources (offline mode).
Note | This installation can be done only on Cisco EPN Manager 2.0 MP1. |
Because we recommend you save the Geo Map compressed file to a remote repository due to the file size, make sure a remote repository has been configured. For instructions on how to configure a remote repository (or a local one, if you choose to use that instead), see the procedure for creating backup repositories in the “Use Remote FTP Backup Repositories” section in Cisco Evolved Programmable Network Manager User and Administrator Guide.
Step 1 | Download the
Geo Map files from Cisco.com.
|
Step 2 | Copy the Geo Maps compressed file to a desired storage repository. When copying to Cisco EPN Manager server, you can copy the file only to your local storage. But due to the huge file size, we can also copy the file to a remote repository, if already configured. |
Step 3 | In case of
copying the compressed file to the local repository, open a CLI session with
the
Cisco EPN
Manager server as a
Cisco EPN
Manager CLI admin user.
For example, this command uses scp: (admin#)scp adminUser@ipAddress:/sourcePath/xxx_GeoMap_CEPNM_2_0_1-bundle.tar.gz /localdisk/defaultRepo
|
The installation process will uncompress the Geo Maps files and install them in /opt/CSCOlumos/resources/offline_geo. To avoid storage constraints, consider mounting additional storage on the directory (by editing /etc/fstab). If you have high availability and need to mount additional storage, be sure to edit the /etc/fstab file on both the primary and secondary servers.
Step 1 | As a Cisco EPN
Manager CLI admin user, open a CLI session with the Cisco EPN Manager server
and install the files. (For information on this command, see the
Cisco Prime Infrastructure 3.1
Command Reference Guide.
(admin#)application install xxx_GeoMap_CEPNM_2_0_1-bundle.tar.gz repositoryName Where: The installation takes a few minutes to complete depending on the size of the map resources.
| ||
Step 2 | Verify that the
maps were installed successfully by confirming that a directory named
geoMaps was
created under /opt/CSCOlumos/resources/offline_geo.
|
After you have installed the Geo Maps, configure Cisco EPN Manager to use the installed map resources. In :
For more information, see the Cisco Evolved Programmable Network Manager User and Administrator Guide.
Note | If you need to install additional map resources, follow the same steps of downloading and installing them. Restart the Cisco EPN Manager server after configuring to view the newly installed map resources. |