Cisco IOS XR System Error Message Reference Guide, R3.8.4
Forwarding Messages
Downloads: This chapterpdf (PDF - 391.0KB) The complete bookPDF (PDF - 16.68MB) | Feedback

Forwarding Messages

Table Of Contents

Forwarding Messages

FWD_EDGE_ADJ Messages

FWD_HAL Messages

FWD_L2HAL Messages

HAL_PDFIB Messages

IP_TUNNEL_MA_LTRACE Messages

IP_TUNNEL Messages

IPT_EA_LTRACE Messages


Forwarding Messages


This section contains all CEF and FIB related System Error Messages.

FWD_EDGE_ADJ Messages

Error Message     
 
    
    
   

%FORWARDING-FWD_EDGE_ADJ-2-EDGE_ADJ_ERR GSR edge adj dll layer internal error [chars] : [chars]

Explanation    A runtime error occurred in GSR adj's egine layer. The reason for the failure is displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

FWD_HAL Messages

Error Message     
 
    
    
   

%FORWARDING-FWD_HAL-2-ACCESSOR Failed to access [chars] field of [chars] object, error: [dec] [chars]

Explanation    A runtime error occurred while trying to access the specified field of the specified object in the Platform Independent SW Data Structures. The reason for the failure is also displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_HAL-2-ADJ_ERR GSR adj internal error: [chars]

Explanation    A runtime error occurred in GSR adj module.The reason for the failure is also displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_HAL-2-BACKWALK_ERR Backwalk on [dec] object due to [chars] event failed, error: [dec] [chars]

Explanation    A runtime error occurred while trying to walk and update dependent objects in the forwarding chain. The reason for the failure is also displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_HAL-2-ECD_ERR GSR ECD internal error: [chars]

Explanation    A runtime error occurred in GSR ecd module.The reason for the failure is also displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_HAL-2-ECD_TRKR_ERR GSR ECD internal error: [chars]

Explanation    A runtime error occurred in GSR ecd tracker module.The reason for the failure is also displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_HAL-2-FASTCONV_CLI_ERR FastConvergence CLI: [chars], error: [chars]

Explanation    A runtime error occurred while apply the Fast convergence CLI. The reason for the failure is also displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_HAL-2-HW_OCE_NULL [chars] - GSR HAL internal error: hal object ([chars]) getting a NULL hw_oce

Explanation    A runtime error occurred in GSR MPLS module.The reason for the failure is also displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_HAL-2-HW_OCE_NULL --

Explanation    A runtime error occurred in GSR MPLS module.The reason for the failure is also displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_HAL-2-IDB_ERR GSR IDB internal error: [chars]

Explanation    A runtime error occurred in GSR IDB module.The reason for the failure is also displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_HAL-2-INIT [chars], error: [dec] [chars]

Explanation    A runtime error occurred while initalizing GSR Hardware Abstraction Layer (HAL) module. The reason for the failure is displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_HAL-2-INVALID_PARENT_OBJ GSR FIB internal error: [chars] failed to get parent [chars] obj - [chars]

Explanation    A runtime error occurred in GSR FIB module.The reason for the failure is also displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_HAL-2-LDI_ERR GSR loadinfo internal error: [chars]

Explanation    A runtime error occurred in GSR loadinfo module.The reason for the failure is also displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_HAL-2-MTRIE_MODE_CLI_ERR MTRIE Mode CLI: [chars], error: [chars]

Explanation    A runtime error occurred while connecting to SysDB Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_HAL-2-PFX_ERR GSR prefix internal error: [chars]

Explanation    A runtime error occurred in GSR prefix module.The reason for the failure is also displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_HAL-2-SHMWIN_ERR [chars], error: [dec] [chars]

Explanation    A runtime error occurred while operating on a shared memory window. The reason for the failure is displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_HAL-2-STATS_INTF_REGISTER Failed to register interface [hex] with Stats module, error: [dec] [chars]

Explanation    A runtime error occurred while trying to register the specified interface with Stats module for stats collection. The reason for the failure is also displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_HAL-2-STATS_INTF_UNREGISTER Failed to unregister interface [hex] from Stats module, error: [dec] [chars]

Explanation    A runtime error occurred while trying to unregister the specified interface from Stats module for stats collection. The reason for the failure is also displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_HAL-2-STATS_VALIDATION Stats validation error: [chars] ([dec]): [chars]

Explanation    A validation error occurred while doing an LSP/TE statistics operation. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_HAL-2-TUNNEL_NH_ERR GSR l3VPNOIP internal error: [chars]

Explanation    A runtime error occurred in GSR L3VPNOIP module.The reason for the failure is also displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_HAL-2-UNSUPT_TERMINATE Forwarding requested unsupported platform HW resource recovery and platform is forcing line card reset to recover hardware resources

Explanation    The FIB encountered an unrecoverable error afer one or more crashes. It is attempting to purge all hardware and software resources before starting a clean initialization. The platform does not support hardware resource recovery and is resetting the line card to recover all hardware resources. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_HAL-2-USED_BY_BGP_STATUS_CHANGE Used by BGP status changed from [chars] to [chars] on obj 0x[pointer]

Explanation    Used by BGP status on the loadinfo changed. This is not generally expected and config needs to be examined to understand the cause. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_HAL-3-PM_ERR Platform Manager returned an error looking up interface [hex]: [chars]

Explanation    A runtime error occured, whereby Platform Manager returned an unexpected error while looking up an interface. If the error is 'Resource temporarily unavailable' then the error is not fatal. Any other error is unexpected, and more serious.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_HAL-3-PP_NFN_LIB_GET_INFO Error encountered by HAL ppinfo notification library while receiving ppinfo notification batch. Error: [chars]

Explanation    An error was encountered while processing a notification of a change to the packet path info for one or more adjacencies. Forwarding for the affected adjacencies may now be inconsistent.

Recommended Action    Restarting the affected client may solve the issue. If not, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_HAL-3-PP_NFN_MSG_HDLR Error handling a [chars] message from a HAL ppinfo notification client. Error: [chars] ([chars])

Explanation    An error was encountered while processing a message of the given type from client for HAL notifications of changes to the packet path info for adjacencies for a given interface type. Forwarding for the affected adjacencies may now be inconsistent.

Recommended Action    Restarting the affected client may solve the issue. If not, Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_HAL-6-CHANGE_MTRIE_MODE_CLI_INFO WARNING: Mtrie mode you selected will only take effect on Engine 3 linecards and will be effective on each linecard after it has been reloaded. Please reload using the command: hw-module reload location r/s/CPU0

Explanation    This command requires reprogramming all the prefixes in the LC hardware.

Recommended Action    Please reload each Engine 3 linecard using the command: hw-module reload location r/s/CPU0

Error Message     
 
    
    
   

%FORWARDING-FWD_HAL-6-FASTCONVERGENCE_CLI_INFO WARNING: This command will take effect only after reloading the node. Please reload the node using the command hw-module reload location r/s/CPU0

Explanation    This command will take effect only after reloading the node. Please reload the node using the command hw-module reload location r/s/CPU0

Recommended Action    Please reload the node using the command hw-module reload location r/s/CPU0

FWD_L2HAL Messages

Error Message     
 
    
    
   

%FORWARDING-FWD_L2HAL-2-ACCESSOR Failed to access [chars] field of [chars] object, error: [dec] [chars]

Explanation    A runtime error occurred while trying to access the specified field of the specified object in the Platform Independent SW Data Structures. The reason for the failure is also displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_L2HAL-2-BACKWALK_ERR Backwalk on [dec] object due to [chars] event failed, error: [dec] [chars]

Explanation    A runtime error occurred while trying to walk and update dependent objects in the forwarding chain. The reason for the failure is also displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_L2HAL-2-CONFIG_NOT_SUPPORTED LC cannot be edge and core simultaneously.

Explanation    A runtime error occurred in GSR L2HAL module.The reason for the failure is also displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_L2HAL-2-HW_OCE_NULL --

Explanation    A runtime error occurred in GSR MPLS module.The reason for the failure is also displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_L2HAL-2-HW_OCE_NULL [chars] - GSR L2 HAL internal error: hal object ([chars]) getting a NULL hw_oce

Explanation    A runtime error occurred in GSR MPLS module.The reason for the failure is also displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_L2HAL-2-INIT [chars], error: [dec] [chars]

Explanation    A runtime error occurred while initializing GSR Layer 2 VPN Hardware Abstraction Layer (L2 HAL) module. The reason for the failure is displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_L2HAL-2-INVALID_PARENT_OBJ GSR L2 FIB internal error: [chars] failed to get parent [chars] obj - [chars]

Explanation    A runtime error occurred in GSR L2 FIB module.The reason for the failure is also displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_L2HAL-2-MQOS [chars], error: [dec] [chars]

Explanation    A runtime error occurred while initalizing GSR Layer 2 VPN Hardware Abstraction Layer (L2 HAL MCAST QoS) Multicast QoS module. The reason for the failure is displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_L2HAL-2-SHMWIN_ERR [chars], error: [dec] [chars]

Explanation    A runtime error occurred while operating on a shared memory window. The reason for the failure is displayed. Please call Cisco Support with the error information.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-FWD_L2HAL-6-INIT_RETRY [chars], error: [dec] ([chars])

Explanation    A transient error occurred while initializing GSR Layer 2 VPN Hardware Abstraction Layer (L2 HAL) module. The reason for the failure is displayed. No action is required as this initialization will be retried.

Recommended Action    No action is required.

HAL_PDFIB Messages

Error Message     
 
    
    
   

%FORWARDING-HAL_PDFIB-6-PD_UPDATE [chars] FIB object [chars], action [chars], HAL_OBJ [chars], Ctx 0x[pointer] FIB Ctx [hex], error [chars]

Explanation    This is a supplementary error message generated by c12000 platform FIB mgr to provide additional information with platform specific error codes. We would expect platform independent FIB Mgr generate the main error message FORWARDING FIB PLATF_UPD_FAIL to drive main error message.

Recommended Action    Please collect console logs and identify both PD_UPDATE failure and FIB PLATF_UPD_FAIL messge to correlate the root cause of the failure. Recommende action need to be driven as per the 'FORWARDING FIB PLATF_UPD_FAIL' message.

Error Message     
 
    
    
   

%FORWARDING-HAL_PDFIB-6-PD_UPDATE_IFH [chars] FIB object [chars], action [chars], HAL_OBJ [chars], Ctx 0x[pointer] FIB Ctx [hex], ifh [hex], error1 [chars], error2 [chars]

Explanation    This is a supplementary error message generated by c12000 platform FIB mgr to provide additional information with platform specific error codes. We would expect platform independent FIB Mgr generate the main error message FORWARDING FIB PLATF_UPD_FAIL to drive main error message.

Recommended Action    Please collect console logs and identify both PD_UPDATE failure and FIB PLATF_UPD_FAIL messge to correlate the root cause of the failure. Recommende action need to be driven as per the 'FORWARDING FIB PLATF_UPD_FAIL' message.

IP_TUNNEL_MA_LTRACE Messages

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL_MA_LTRACE-7-INIT ltrace_init failed for '[chars]': [chars]

Explanation    Initialization failed. Both the initialization type and the error code are displayed. The sysmgr process will restart the ip_tunnel if this condition happens.

Recommended Action    None

IP_TUNNEL Messages

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-AIB Failed to link AIB: [chars] [[dec]: [chars]]

Explanation    Failed to link AIB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-AIBSERVER AIB Server error: [chars] [[dec]: [chars]]

Explanation    AIB Server internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-ASYNC_MSG Invalid message: [chars] [code equals [dec], value equals [dec]]

Explanation    Invalid message.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-BADCHECKSUM Bad checksum - computed equals [hex], received equals [hex]

Explanation    Mismatch in received/computed checksum was detected.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-BADKEY Incorrect key - received: [dec], expected: [dec]

Explanation    A packet was received with a bad key.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-EAIDB EA IDB error: [chars]

Explanation    EA IDB related error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-EAINIT Error initializing EA of IP Tunnel: [chars]

Explanation    Initialization of IP Tunnel's EA failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-ENS_READ Client [chars] failed to read data from server (ip_tunnel_ma) : [chars]

Explanation    Client process issued ens_read and it failed. It is because the server is either busy or there is problem is gsp communicatoin.

Recommended Action    Restarting the client process could recover

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-EVENTMGR Error of EventMgr: [chars] [[dec]: [chars]]

Explanation    EventMgr failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-FEA FEA internal error: [chars]

Explanation    FEA internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-FIB_ERROR FIB DLL error: [chars] [[dec]: [chars]]

Explanation    FIB DLL error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-FIB_INIT FIB DLL initialization error: [chars] [[dec]: [chars]]

Explanation    Failed to initialize in FIB DLL.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-FIB_SEND Message send error: [chars] [[dec]: [chars]]

Explanation    Failed to send the message to FIB.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-IMPSERVER IMP Server error: [chars] [[dec]: [chars]]

Explanation    IMP Server internal error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-IPT_DEBUG IP Tunnel debug: [chars] [[dec]: [chars]]

Explanation    Failed to initialize the debug events for IP tunnel.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-LOOPING Encapsulation looping detected: inner: [chars], outer: [chars]

Explanation    An encapsulation loop was detected.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-MAINIT Error initializing MA of IP Tunnel: [chars] [[dec]: [chars]]

Explanation    Initialization of IP Tunnel's MA failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-MEM Memory operation error: [chars]

Explanation    Memory operation error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-NETIOIDB NetIO IDB error: [chars]

Explanation    NetIO IDB related error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-P2MP_TUNNEL Failed to process P2MP tunnel updates: [chars] [[dec]: [chars]]

Explanation    Failed to process P2MP tunnel updates.

Recommended Action    The P2MP tunnel fails to program the tunnel information updates. To recover, please try: shut and no shut the tunnel source interface, or restart the gre_ipip_ea process. For further action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-ROUTING GRE tunnel packet received with source routing

Explanation    A GRE tunnel packet with the source routing option was received.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-SEQUENCE GRE tunnel packet received with sequence option

Explanation    A GRE packet was received with the sequence option.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-THREAD Error of pthread: [chars] [[dec]: [chars]]

Explanation    Error of pthread function.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-UNKNOWN_GRE_TUNNEL Packet received for unknown tunnel or bad key. Source: [chars], Destination: [chars], Key: [dec]

Explanation    A GRE tunnel packet was received for a tunnel that is not configured in this router or there was a key mis-match.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-UNKNOWN_IPIP_TUNNEL Packet received for unknown tunnel. Source: [chars], Destination: [chars]

Explanation    An IPinIP tunnel packet was received for a tunnel that is not configured in this router.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-UNKNOWN_MSG Invalid message: [chars] [type equals [dec]]

Explanation    Invalid message.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-UNSUP_PROTO Unsupported protocol [[dec]]

Explanation    Unsupported protocol.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-3-VERSION GRE tunnel packet received with bad version number ([dec])

Explanation    A GRE tunnel packet was received with a bad version number.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-4-DECAP IP Tunnel Decapsulation fail: [chars] [[dec]: [chars]]

Explanation    Failed to decap the packet.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-4-ENCAP IP Tunnel Encapsulation fail: [chars]

Explanation    Failed to encaps the packet.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-4-FIB_CONNECTION Initialization failed: [chars] [[dec]: [chars]]

Explanation    Initialization failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FORWARDING-IP_TUNNEL-4-MTU Tunnel MTU operation fail: [chars] [[dec]: [chars]]

Explanation    Failed to set/change tunnel mtu.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

IPT_EA_LTRACE Messages

Error Message     
 
    
    
   

%FORWARDING-IPT_EA_LTRACE-3-INIT ltrace_init failed for '[chars]': [chars]

Explanation    Initialization failed. Both the initialization type and the error code are displayed.

Recommended Action    None