Cisco IOS XR System Error Message Reference Guide, Release 3.2
Security (SECURITY) Messages for Cisco IOS XR
Downloads: This chapterpdf (PDF - 572.0KB) The complete bookPDF (PDF - 10.75MB) | Feedback

Security Messages

Table Of Contents

Security Messages

aaa_task Messages

AAA Messages

CE Messages

CEPKI Messages

IKE Messages

IMP Messages

IPP Messages

LOCALD Messages

login Messages

PKI Messages

RADIUSD Messages

SAM Messages

sIMP Messages

SPM Messages

SSHD Messages

TACACSD Messages


Security Messages


This section contains all Security related System Error Messages, sucyh as AAA, IPSec and related protocols, and so forth. The following facility codes are represented in this module:

aaa_task Messages

AAA Messages

CE Messages

CEPKI Messages

IKE Messages

IMP Messages

IPP Messages

LOCALD Messages

login Messages

PKI Messages

RADIUSD Messages

SAM Messages

sIMP Messages

SPM Messages

SSHD Messages

TACACSD Messages

aaa_task Messages

Error Message     
 
    
    
   

%SECURITY-aaa_task-3-CERRNO_ERROR [chars]: [chars] failed - [dec]: [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-aaa_task-3-DLLMAIN_ERROR Error encountered in dllmain for [chars]: [chars]

Explanation    Error message from debug module

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-aaa_task-3-GENERIC_ERROR [chars]: [chars]

Explanation    Error message from aaa task debug routine

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-aaa_task-3-INVALID_AAA_TASK_DEBUG_FLAG [chars]: The aaa task debug flag [dec] does not exist.

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-aaa_task-3-NO_MEMORY Not enough memory

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

AAA Messages

Error Message     
 
    
    
   

%SECURITY-AAA-3-admin_login [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-AAA-3-AVPAIR_MSG_ERR [chars]: avpair message error [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-AAA-3-CERRNO_ERROR [chars]: failed - [dec]: [chars]

Explanation    Error message from aaa_debug routine

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-AAA-3-CERRNO_ERROR [chars]: failed - [dec]: [chars]

Explanation    Error message from aaa_debug routine

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-AAA-3-DES_INIT_FAIL [chars]: des initialization failed

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-AAA-3-DLLMAIN_ERROR Error encountered in dllmain for [chars]: [chars]

Explanation    Error message from debug module

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-AAA-3-DLLMAIN_ERROR Error encountered in dllmain for [chars]: [chars]

Explanation    Error message from debug module

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-AAA-3-ERR_ECM [chars]: failed at function [chars] with error [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-AAA-3-ERR_GET_SLOT_FOR_PATH [chars]: Failed to get the slot number.

Explanation    An internal software error has occured.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-AAA-3-ERR_SERVER_GROUP [chars]: [chars]

Explanation    None at this time

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-AAA-3-ERR_SYSDB_DATA [chars]: [chars]

Explanation    None at this time

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-AAA-3-ERROR_NO_MEM Not enough memory available while [chars].

Explanation    An internal software error occured.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-AAA-3-ERROR_NO_MEM Not enough memory available while [chars].

Explanation    An internal software error occured.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-AAA-3-GENERIC_ERROR [chars]: [chars]

Explanation    Error message from aaa_debug routine

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-AAA-3-GENERIC_ERROR [chars]: [chars]

Explanation    Error message from aaa_debug routine

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-AAA-3-SYSDB_FAIL failure at sysdb call [chars] with result: [chars].

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-AAA-3-SYSDB_FAIL failure at sysdb call [chars] with result: [chars].

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-AAA-3-WHITESPACE_TRUNCATED_IN_SERVER_KEY WARNING: The server key contained trailing whitespace and was truncated

Explanation    Whitespace is not allowed at the end of a server key.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-AAA-6-CONSOLE_AUTHFREE Console authorization turned off !!!

Explanation    Info message from debug module

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-AAA-7-ERR_ECM [chars]: failed at function [chars] with error [chars]

Explanation    The initial connection failed, but retry is successfully rescheduled.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-AAA-7-ERR_SYSDB [chars]: failure at sysdb call [chars] with result: [chars]

Explanation    None at this time

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

CE Messages

Error Message     
 
    
    
   

%SECURITY-CE-3-ERR_COPY_CRL Error copying CRL from [chars] to [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-CE-3-ERR_DEL_CA_CERT Failed to delete CA certificate from SysDB [chars] during merge oper

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-CE-3-ERR_FILE_MD5 Failed in MD5 operation for file: [chars], [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-CE-3-ERR_FILE_STAT Error in file stat operation: [chars], [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-CE-3-ERR_INVALID_DEVICE Invalid device name '[chars]'

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-CE-3-ERR_INVALID_PARAMETER Invalid parameters being passed: [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-CE-3-ERR_NO_DIGESTINDEX_VALUE Installed file, [chars], does not have CEPKI index entry

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-CE-3-ERR_NO_MEMORY Out of memory

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-CE-3-ERR_OPEN_FILE Failed opening file: [chars], [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-CE-3-ERR_RD_FILE Failed reading file: [chars], [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-CE-3-ERR_REG_MSGNO Could not register CEPKI_MSGNO message handler for message id [dec]: [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-CE-3-ERR_RESTORE_LOG_ENCODE Failed to encode bag for log entry [dec] during restore, [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-CE-3-ERR_SPM SPM is not available, CEPKI cannot access its secure files

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-CE-3-ERR_SYSDB_GET Failed to get item [chars] in SysDB: [hex], [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-CE-3-ERR_UNKNOWN_PULSE Detected receiving an unknown pulse code ([dec])

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-CE-3-ERR_WR_FILE Failed writing file : [chars], [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-CE-6-ERR_1_PARAM [chars]

Explanation    CEPKI general error message with one prameter.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-CE-6-ERR_2_PARAM [chars], [chars]

Explanation    CEPKI general error message with two prameters.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-CE-6-WARNING [chars]

Explanation    CEPKI general warning message.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-CE-6-WARNING_INSECURE_FLASH_FILE [chars] is detected insecure, backup not restored

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-CE-6-WARNING_UNMATCH_DIGEST [chars] has been changed since last installed.

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

CEPKI Messages

Error Message     
 
    
    
   

%SECURITY-CEPKI-6-ERR [chars]

Explanation    CEPKI general error message with one prameter.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-CEPKI-6-ERR_2 [chars] [chars]

Explanation    CEPKI general error message with two prameters.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-CEPKI-6-INFO [chars]

Explanation    CEPKI general info message with one prameter.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-CEPKI-6-WARNING [chars]

Explanation    CEPKI general warning message.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-CEPKI-6-WARNING_2 [chars] [chars]

Explanation    CEPKI general warning message.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

IKE Messages

Error Message     
 
    
    
   

%SECURITY-IKE-3-ADD_KEY_FAIL IKE detects failure adding key, name [chars], ip address [unsigned int]

Explanation    IKE found failure when adding key

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-IKE-3-AUTH_FAIL IKE detects failure during authentication [dec], [unsigned int]

Explanation    IKE found failure during authentication

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-IKE-3-BAD_CERT_USE IKE detects bad certificate was used, [chars], [chars]

Explanation    IKE found bad certificate was used

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-IKE-3-BAD_DOI_NOTIFY IKE detects bad DOI notify, DOI is [dec], address is [unsigned int]

Explanation    IKE found bad DOI notify

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-IKE-3-BADDOI_SA IKE detects DOI sa is bad, [unsigned int], [unsigned int]

Explanation    IKE found the DOI sa is bad

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-IKE-3-BADMAGIC Bad [chars] magic number ([hex]).

Explanation    'An internal software error.'

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-IKE-3-CRYPT_FAILURE IKE detects en/de-crypto services failure, [unsigned int], [chars]

Explanation    IKE found failure returned from en/de-crypto services

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-IKE-3-ERR_2_PARAM [chars], [chars]

Explanation    IKE general error message with two prameters.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-IKE-3-ERR_FILE_STAT Error in file stat operation: [chars], [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-IKE-3-ERR_INVALID_PARAMETER Invalid parameters being passed: [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-IKE-3-ERR_NO_MEMORY Out of memory

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-IKE-3-ERR_OPEN_FILE Failed opening file: [chars], [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-IKE-3-ERR_RD_FILE Failed reading file: [chars], [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-IKE-3-ERR_REG_MSGNO Could not register IKE_MSGNO message handler for message id [dec]: [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-IKE-3-ERR_SYSDB_GET Failed to get item [chars] in SysDB: [hex], [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-IKE-3-ERR_UNKNOWN_PULSE Detected receiving an unknown pulse code ([dec])

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-IKE-3-ERR_WR_FILE Failed writing file : [chars], [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-IKE-3-ERROR [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-IKE-3-FILE_ATTACH_ERR Event file attach failed when attaching msgq descriptor

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-IKE-3-IKEINIT [chars]

Explanation    An IKE initialization error

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-IKE-3-INVAL_CERT IKE detects invalid certificate [chars], [chars]

Explanation    IKE found invalid certificate

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-IKE-3-MQ_FAIL [chars]:Failed on [chars]:[chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-IKE-3-NO_ID_CERT_ADDR_MATCH IKE detects no ID certificate address match [unsigned int], [dec], [unsigned int]

Explanation    IKE found no ID certificate address match

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-IKE-3-NO_ID_CERT_DN_MATCH IKE detects no ID certificate DN match [chars], [dec], [chars]

Explanation    IKE found no ID certificate DN match

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-IKE-3-NO_ID_CERT_FQDN_MATCH IKE detects no ID certificate FQDN match [chars], [dec], [chars]

Explanation    IKE found no ID certificate FQDN match

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-IKE-3-NO_ID_CERT_USER_FQDN_MATCH IKE detects no ID certificate user FQDN match [chars], [dec], [chars]

Explanation    IKE found no ID certificate user FQDN match

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-IKE-3-QUERY_KEY IKE detects failure when querying key

Explanation    IKE found failure when querying key

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-IKE-3-SA_NOT_AUTH IKE detects the sa is not authenticated [chars]

Explanation    IKE found the sa has not been authenticated

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-IKE-3-SA_NOT_OFFERED IKE detects SA not being offered [unsigned int], [chars]

Explanation    IKE found SA not offered

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-IKE-4-BAD_MESSAGE IKE message from [chars] failed its sanity check or is malformed

Explanation    A quick sanity check is done on all received ISAKMP messages to verify that all component payload types are valid, and that the sum of their individual lengths equals the total length of the received message. This message failed the sanity check. Persistantly bad messages could be a denial of service attack or bad decryption.

Recommended Action    'Contact the remote peer's administrator.'

Error Message     
 
    
    
   

%SECURITY-IKE-4-NO_SA IKE message from [chars] has no SA and is not an initialization offer

Explanation    IKE maintains state for a communication in the form of security associations. No security association exists for this packet and it is not an initial offer from the peer to establish one. This situation could denote a denial of service attack.

Recommended Action    'Contact the remote peer and/or his administrator'

Error Message     
 
    
    
   

%SECURITY-IKE-4-WARNING [chars]

Explanation    Internal Warning.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-IKE-4-WARNING2 [chars], [chars]

Explanation    Internal Warning.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-IKE-4-WARNING3 [chars], [chars], [chars]

Explanation    Internal Warning.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-IKE-6-BAD_DOI_SA DOI value [dec] from SA offer from [chars] is invalid

Explanation    The DOI field of an SA offer defines how to parse the fields SAs with an unknown DOI cannot be parsed

Recommended Action    'If this situation persists contact the remote peer's administrator'

Error Message     
 
    
    
   

%SECURITY-IKE-6-MODE_FAILURE Processing of [chars] mode failed with peer at [chars]

Explanation    Negotiation with the remote peer failed.

Recommended Action    'If this situation persists contact the remote peer'

Error Message     
 
    
    
   

%SECURITY-IKE-6-NOT_ENCRYPTED IKE packet from [chars] was not encrypted and it should've been.

Explanation    A portion of the IKE exchange takes place in the clear and a portion is encrypted. This message should have been encrypted but was not.

Recommended Action    'Contact remote peer'

Error Message     
 
    
    
   

%SECURITY-IKE-6-UNK_EXCHANGE IKE peer at [chars] sent a message with unknown exchange [dec]

Explanation    IKE preforms actions on messages based on defined exchanges. The message received had an unknown exchange.

Recommended Action    'Contact the remote peer's administrator'

IMP Messages

Error Message     
 
    
    
   

%SECURITY-IMP-3-FATAL_ERR [chars]

Explanation    An internal software fatal error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-IMP-3-FILE_ATTACH_ERR Event file attach failed when attaching msgq descriptor

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-IMP-3-MQ_FAIL [chars]:Failed on [chars]:[chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-IMP-4-MSG_WARN Receive invalid message type [dec]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

IPP Messages

Error Message     
 
    
    
   

%SECURITY-IPP-3-ERR_GENERAL [chars] [chars]

Explanation    Error description, error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-IPP-3-ERR_MALLOC Cannot allocate memory in function [chars]()

Explanation    Internal error. System is out of memory - malloc failed.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-IPP-6-INFO_GENERAL [chars]

Explanation    The IPSec IPP encountered some problem in genric nature or plain information.

Recommended Action    'No action is required.'

LOCALD Messages

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-AMBIGUOUS_PASSWD Ambiguous Password

Explanation    Single digit passwords are not allowed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-AVPAIR_ERROR [chars]:Failed to [chars] attr [dec] - [chars]

Explanation    Error in processing an AV pair

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-BAG_ENCODE_ERR [chars]: bag_encode failed with error: [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-BAGS_UNREG_ERR [chars]: bag_unregister failed with error [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-CONFIG_ERR Configuration operation failed while [chars] - [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-ERR_INTERNAL Internal error: [chars] ([chars])

Explanation    An internal error occurred

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-ERR_INVALID_ARG [chars] was called with invalid input argument

Explanation    An internal software error has occurred

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-ERR_INVALID_GROUP [chars]: [chars]

Explanation    AAA failed to recognize the specified server group name. It may be undefined.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-ERR_INVALID_IPADDR [chars]: Trying to set invalid ipaddr(0.0.0.0) with user [chars]

Explanation    An internal software error has occurred

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-ERR_NO_REPLYINFO [chars]:Failed to find reply info attr [dec]

Explanation    No reply information (LWM channel) present

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-ERR_PROC_READY [chars] Cannot notify sysmgr that locald is ready [dec] [chars]

Explanation    Error while communicating with system manager.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-ERR_UNSUPPORTED_GROUP Group [chars] is not valid for [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-GENERIC_ERROR [chars]: [chars]

Explanation    Generic error message used for internal debugging

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-INTERNAL [chars]. Error: [chars]

Explanation    The client library has reached an inconsistent state.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-INTERNAL_NULL A NULL pointer was passed by the locald client library to itself

Explanation    The client library has passed itself a NULL pointer.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-list_undefined Method list [chars] is not defined. Config rejected.

Explanation    Trying to configure a method list in the line configuration that is not defined in AAA

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-LOCAL_PRESENT [chars]

Explanation    local method is present in the methodlist.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-LOCKING Failed to [chars] [chars]. Error: [chars]

Explanation    The client library has either failed to obtain or release a lock.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-LWA_ADD_DIR_FAIL Failed to add the username [chars] to lightweight authentication password database - [chars]. (Please remove/rename the file '/disk0:/AAA', which is in conflict with the directory '/disk0:/aaa/'.)

Explanation    A file with the same name as aaa directory detected.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-LWA_ADD_FAIL Failed to add the username [chars] to lightweight authentication password database - [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-LWA_REM_FAIL Failed to remove the username [chars] from lightweight authentication password database - [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-MEMORY Failed to malloc [unsigned int] bytes

Explanation    The client library has failed to allocate the required amount of memory.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-MQ_RECEIVE_FAIL_ERR [chars]:Failed on mq_receive:[chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-MSG_REPLY_FAIL [chars]: failed to reply to msg from -- [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-MSG_SIZE_ERR [chars]: Size ([dec]) - [chars]

Explanation    An internal error occurred

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-NOSUCH_TASKGROUP The taskgroup '[chars]' is not configured

Explanation    Error while looking up a taskgroup

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-NOSUCH_USERGROUP The usergroup '[chars]' is not configured

Explanation    Error while looking up a usergroup

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-PARAMETER [chars]

Explanation    The client library was passed an invalid parameter.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-PARAMETER_NULL A NULL parameter was passed by the caller of locald

Explanation    The client library was passed a NULL pointer.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-PARAMETER_OPTION An unsupported combination of options were passed by the caller of locald

Explanation    The client library was passed an unsupported option parameter.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-PARAMETER_STRING A string parameter passed by the caller of locald is too long

Explanation    The client library was passed a string which is too long.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-PASSWD_ALREADY_EXISTS Warning: The password too configured for [chars]

Explanation    An internal software error has occurred

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-PLANE_MISMATCH The username '[chars]' is already configured in the other plane (Admin/LR), please choose a different one

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-RED_STATE_ERROR Error on changing redundancy state to [chars] - [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-REPLY_ERROR Failed to send reply - - [chars] ([chars])

Explanation    Error in sending the reply

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-RESOURCE_CERRNO [chars]. Error: [chars]

Explanation    The client library failed to use a resource of one of its (cerrno-returning) libraries.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-RESOURCE_ERRNO [chars]. Error: [chars]

Explanation    The client library failed to use a resource of one of its (errno-setting) libraries.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-ROOT_USERDB_INIT_FAIL [chars]: [chars]

Explanation    Locald failed to create/remove the root user database on the disk. This will affect authentication to ksh since it refers to this database.

Recommended Action    As a workaround an admin could create this directory in disk0 himself. This should get around the problem.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-SECRET_ALREADY_EXISTS Warning: The secret too is configured for [chars]

Explanation    An internal software error has occurred

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-SETPRIO_FAILED Changing locald priority failed [dec]

Explanation    Changing locald priority failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-STBY_INIT_ERR Failed to initialize standby - [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-3-SYS_ACCT_ERR Failed to send START system accounting record - [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-4-ACCT_FAILURE Failed to send the accounting record - [chars]

Explanation    Failed to send an accounting record to RADIUS or TACACS+ server

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-4-CHKPT_FAILURE Error encountered while saving to or recovering from checkpoint - [chars]

Explanation    Encountered a checkpoint save/recovery failure

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-4-EDM_INIT_ERR Failed to register EDM - [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-4-SYSDB_INIT_FAILURE Failed to initialize configuration - [chars]

Explanation    Failed to initialize SysDB connection and verifications

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-4-SYSDB_ITEM [chars] '[chars]'. Error: [chars]

Explanation    The client library failed to carry out the desired request on a SysDB item or directory.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-4-WARN_LAST_OWNER_USER WARNING: This removes the last available owner user in the local database, MIGHT MAKE THE ROUTER INACCESSIBLE FOR ADMIN TASKS. Configuring another local admin user is strongly recommended, before exiting this session

Explanation    Removal of last available owner user in the local database

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-6-ERR_EVENT_MANAGER [chars] Event Manager Create Failure [dec] [chars]

Explanation    Creation of Event Manager failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-6-ERR_NO_HANDLER [chars] Cannot install handler [dec] [chars]

Explanation    Error while installing a handler for incoming messages.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-6-ERR_NO_LINENAME [chars] Cannot get valid line name or interface handle from msg

Explanation    Cannot find a valid line name or interface handler while doing authorization

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-6-ERR_NO_METHOD [chars] Cannot get valid authorization method from msg

Explanation    Cannot find a valid method while doing authorization

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-6-RED_STATE_CHANGE locald changed state to [chars]

Explanation    Redundancy state change notification.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-7-ERR_EVENT_WAIT [chars] Unexpected return from event_wait ignored [dec] [chars]

Explanation    Event Mangager waiting on an event, returned an unexpected value.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-7-ERR_SYSDB_FD [chars]: [chars]

Explanation    Error while using the System Database.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-LOCALD-7-ERR_TTYMGMT_FD [chars]: [chars] - [chars]

Explanation    Error in TTY management library.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

login Messages

Error Message     
 
    
    
   

%SECURITY-login-2-AUTHEN_FAILED Failed authentication attempt by user '[chars]' from '[chars]'

Explanation    Error message from debug module

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-login-3-AAA_INITIALIZE_FAIL [chars]: aaa_initialize failed with blocking is [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-login-3-BAD_AUTHEN_RETRY [chars]: Invalid authentication retry number [dec] passed in. Reset to default.

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-login-3-CERRNO_ERROR [chars]: [chars] failed - [dec]: [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-login-3-DLLMAIN_ERROR Error encountered in dllmain for [chars]: [chars]

Explanation    Error message from debug module

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-login-3-GENERIC_ERROR [chars]: [chars]

Explanation    Error message from login_debug routine

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-login-3-ILLEGAL_STATUS Illegal Status value [dec] received at line [dec] of [chars]().

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-login-3-INIT_MSG_FAIL [chars]: aaa_init_msg returned NULL.

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-login-3-INVALID_LOGIN_DEBUG_FLAG [chars]: The login debug flag [dec] does not exist.

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-login-3-LISTNAME_NULL [chars]: Invalid listname NULL.

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-login-3-NO_MEMORY Not enough memory was available while [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-login-3-STORE_AUTHEN_USER_ERR Failed to store the authenticated username [chars] in database

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-login-3-SYSDB_BIND_FAILED [chars]: sysdb_bind failed. [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-login-3-SYSDB_ITEM_GET_FAILED [chars]: sysdb_item_get failed. [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-login-3-TTY_OPEN_FAIL [chars]: failed to open tty error [dec] [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-login-3-TTYNAME_FAIL [chars]: Failed to obtain tty name

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

PKI Messages

Error Message     
 
    
    
   

%SECURITY-PKI-3-ERR_COPY_CRL Error copying CRL from [chars] to [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-PKI-3-ERR_DEL_CA_CERT Failed to delete CA certificate from SysDB [chars] during merge oper

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-PKI-3-ERR_FILE_MD5 Failed in MD5 operation for file: [chars], [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-PKI-3-ERR_FILE_STAT Error in file stat operation: [chars], [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-PKI-3-ERR_INVALID_DEVICE Invalid device name '[chars]'

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-PKI-3-ERR_INVALID_PARAMETER Invalid parameters being passed: [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-PKI-3-ERR_NO_DIGESTINDEX_VALUE Installed file, [chars], does not have CEPKI index entry

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-PKI-3-ERR_NO_MEMORY Out of memory

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-PKI-3-ERR_OPEN_FILE Failed opening file: [chars], [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-PKI-3-ERR_RD_FILE Failed reading file: [chars], [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-PKI-3-ERR_REG_MSGNO Could not register CEPKI_MSGNO message handler for message id [dec]: [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-PKI-3-ERR_RESTORE_LOG_ENCODE Failed to encode bag for log entry [dec] during restore, [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-PKI-3-ERR_SPM SPM is not available, CEPKI cannot access its secure files

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-PKI-3-ERR_SYSDB_GET Failed to get item [chars] in SysDB: [hex], [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-PKI-3-ERR_UNKNOWN_PULSE Detected receiving an unknown pulse code ([dec])

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-PKI-3-ERR_WR_FILE Failed writing file : [chars], [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-PKI-6-ERR_1_PARAM [chars]

Explanation    CEPKI general error message with one prameter.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-PKI-6-ERR_2_PARAM [chars] [chars]

Explanation    CEPKI general error message with two prameters.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-PKI-6-LOG_INFO [chars]

Explanation    CEPKI general error message with one prameter.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-PKI-6-LOG_INFO_2 [chars] [chars]

Explanation    CEPKI general log message with 2 prameter.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-PKI-6-WARNING [chars]

Explanation    CEPKI general warning message.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-PKI-6-WARNING_INSECURE_FLASH_FILE [chars] is detected insecure, backup not restored

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-PKI-6-WARNING_UNMATCH_DIGEST [chars] has been changed since last installed.

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

RADIUSD Messages

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-ACCT_NOTIFY_FAIL Failed to notify the completion of accounting to sender - [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-ADD_SYS_IP_ADDR_ATTR_ERR [chars]: NAS IP address omitted

Explanation    An internal software error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-ADD_SYS_IP_ADDR_ATTR_ERR [chars]: NAS IP address omitted

Explanation    An internal software error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-ADD_VSA_FAIL [chars]: failed to add VSA av-pair [dec] with [chars].

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-ADD_VSA_FAIL [chars]: failed to add VSA av-pair [dec] with [chars].

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-BAD_AUTHOR_TYPE [chars]: author type [chars] not supported.

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-BAD_AUTHOR_TYPE [chars]: author type [chars] not supported.

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-BAD_AVPAIR bad aaa av-pair [dec] with length [dec] detected.

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-BAD_AVPAIR bad aaa av-pair [dec] with length [dec] detected.

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-BAD_MSG_TYPE [chars]: Un-supported AAA msg type [dec]

Explanation    Found an un-supported AAA msg type in avlist.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-BAD_MSG_TYPE [chars]: Un-supported AAA msg type [dec]

Explanation    Found an un-supported AAA msg type in avlist.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-BAD_SESSION [chars]: request [chars] has inconsistent server addr: [chars] in req, [chars] in session

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-BAD_VSA_FORMAT_BIT no format bit is set for VSA [chars] according to table bitmap.

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-BAD_VSA_FORMAT_BIT no format bit is set for VSA [chars] according to table bitmap.

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-BAD_VSA_LENGTH [chars]: VSA [dec] has inconsistent length.

Explanation    VSA format error found in radiusd while translating.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-BAD_VSA_LENGTH [chars]: VSA [dec] has inconsistent length.

Explanation    VSA format error found in radiusd while translating.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-BAD_VSA_TYPE [chars]: found bad VSA type [dec] with vendor_id [dec], possibily out-ranged.

Explanation    VSA format error found in radiusd while translating.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-BAD_VSA_TYPE [chars]: found bad VSA type [dec] with vendor_id [dec], possibily out-ranged.

Explanation    VSA format error found in radiusd while translating.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-BAD_VSA_VENDOR no vendor is supported for VSA [chars] according to table bitmap.

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-BAD_VSA_VENDOR no vendor is supported for VSA [chars] according to table bitmap.

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-BAG_ENCODE_ERR [chars]: bag_encode failed with error: [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-BAGS_REG_ERR [chars]: bags_register_all_show_radius_bags failed with error [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-BAGS_UNREG_ERR [chars]: bag_unregister failed with error [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-CONFIG_ERR Encountered configuration error while [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-DECRYPT_NO_MEM_ERR [chars]: failed to allocate memory while decrypting the password

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-DECRYPT_NO_MEM_ERR [chars]: failed to allocate memory while decrypting the password

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-EDM_INIT_ERR Failed to register EDM - [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-ERR_ATTACH_SOCK [chars]: Unable to attach a handler for socket read/write notification

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-ERR_CREATE_SERVER_ENTRY [chars]: Could not create a server entry

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-ERR_CREATESG [chars]: Unable to add the created servergroup in radiusd

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-ERR_ECM [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-ERR_INVALID_ARG [chars] was called with invalid input argument

Explanation    An internal software error has occurred

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-ERR_SET_SERVER_ENTRY [chars]: Error while setting or unsetting a parameter in server entry

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-ERR_SYSDBBIND [chars]: Cannot bind to SysDB

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-ERR_SYSDBBIND [chars]: Cannot bind to SysDB

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-ERR_SYSDBFAIL [chars]: Failed to allocate SysDB event

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-ERR_SYSDBFAIL [chars]: Failed to allocate SysDB event

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-ERR_SYSDBNOTIFY [chars]: Cannot register for notification with SysDB

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-ERR_SYSDBNOTIFY [chars]: Cannot register for notification with SysDB

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-ERR_SYSDBVERIFY [chars]: Cannot register for verification with SysDB

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-ERR_SYSDBVERIFY [chars]: Cannot register for verification with SysDB

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-ERR_TTY_IFH_PRESENT [chars]: Both ttyname ([chars]) and ifh ([hex]) are present in the message

Explanation    In the AV pair message recieved from the radiusd clients should have either ttyname or interface handle, not both.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-ERR_TTY_IFH_PRESENT [chars]: Both ttyname ([chars]) and ifh ([hex]) are present in the message

Explanation    In the AV pair message recieved from the radiusd clients should have either ttyname or interface handle, not both.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-EVENT_ASYNC_ATTACH_FAIL_ERR Event_async_attach failed

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-EVENT_ASYNC_ATTACH_FAIL_ERR Event_async_attach failed

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-EVENT_FILE_ATTACH_ERR Event file attach failed when attaching RADIUSD msgq descriptor

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-EVENT_FILE_ATTACH_ERR Event file attach failed when attaching RADIUSD msgq descriptor

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-EVENT_MANAGER_CREATE_FAIL_ERR Event_manager_create failed with error [dec]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-INTERNAL [chars]. Error: [chars]

Explanation    The client library has reached an inconsistent state.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-INTERNAL_NULL A NULL pointer was passed by the radiusd client library to itself

Explanation    The client library has passed itself a NULL pointer.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-INVALID_ARGS_ERR [chars]: Invalid argument for sysdb_edm get

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-IP_ADDR_TOO_LONG_ERR [chars]: ipaddrtype [chars] too long ([dec])

Explanation    An internal software error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-IP_ADDR_TOO_LONG_ERR [chars]: ipaddrtype [chars] too long ([dec])

Explanation    An internal software error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-LOCKING Failed to obtain or release [chars] lock (error: [chars])

Explanation    The client library has either failed to obtain or release a lock.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-MEMORY Failed to malloc [unsigned int] bytes

Explanation    The client library has failed to allocate the required amount of memory.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-MQ_RECEIVE_FAIL_ERR [chars]:Failed on mq_receive:[chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-MQ_RECEIVE_FAIL_ERR [chars]:Failed on mq_receive:[chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-MSG_REPLY_FAIL [chars]: failed to reply to msg from -- [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-MSG_SIZE_ERR [chars]: Size ([dec]) - [chars]

Explanation    An internal error occurred

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-NO_MEM_ERR [chars]: failed to allocate memory

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-NO_MEM_ERR [chars]: failed to allocate memory

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-NO_USERNAME_ERR [chars]: No or empty username found in msg, request ignored.

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-NO_USERNAME_ERR [chars]: No or empty username found in msg, request ignored.

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-NOT_VSA trying to call [chars] to handle a non-VSA radius attribute [dec].

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-NOT_VSA trying to call [chars] to handle a non-VSA radius attribute [dec].

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-PARAMETER [chars]

Explanation    The client library was passed an invalid parameter.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-PARAMETER_NULL A NULL parameter was passed by the caller of radiusd

Explanation    The client library was passed a NULL pointer.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-PARAMETER_OPTION An unsupported combination of options were passed by the caller of radiusd

Explanation    The client library was passed an unsupported option parameter.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-PARAMETER_STRING A string parameter passed by the caller of radiusd is too long

Explanation    The client library was passed a string which is too long.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-PROBE_THREAD_CREATE_FAILED Unable to create thread to probe status of radius server [chars]/[dec]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-RADIUS_NOSERV Warning: Server [chars]:[dec],[dec] is not defined

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-RADIUS_UPDATE_PASSWORD_ERR [chars]: radius_update_password failed to allocate memory

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-RADIUS_UPDATE_PASSWORD_ERR [chars]: radius_update_password failed to allocate memory

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-RESOURCE_CERRNO [chars]. Error: [chars]

Explanation    The client library failed to use a resource of one of its (cerrno-returning) libraries.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-RESOURCE_ERRNO [chars]. Error: [chars]

Explanation    The client library failed to use a resource of one of its (errno-setting) libraries.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-RIB_BIND_ERR [chars]: RIB bind failed

Explanation    An internal software error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-RIB_BIND_ERR [chars]: RIB bind failed

Explanation    An internal software error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-RIB_LOCAL_ADDRESS_ERR [chars]: NAS IP not found; address omitted

Explanation    An internal software error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-RIB_LOCAL_ADDRESS_ERR [chars]: NAS IP not found; address omitted

Explanation    An internal software error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-SERVER_DOWN RADIUS SERVER [chars]/[dec] is DOWN

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-SERVER_MUTEX_INIT_FAILED Mutex Init for RADIUS SERVER FAILED

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-SETPRIO_FAILED Changing priority failed [dec]

Explanation    Attempt to change priority failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-SYSDB_BIND_FAIL_ERR [chars]: Failed to bind to Sysdb: [chars]. If a Radius source interface is configured, be sure that the interface is not shutdown and re-apply the source interface config.

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-SYSDB_BIND_FAIL_ERR [chars]: Failed to bind to Sysdb: [chars]. If a Radius source interface is configured, be sure that the interface is not shutdown and re-apply the source interface config.

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-SYSDB_BIND_FOR_EDM_ERR [chars]: Failure connecting to sysdb at point [chars] for EDM

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-SYSDB_DIR_GET_LAST_ERR [chars]: Error in sysdb_directory_get_last

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-SYSDB_DIR_GET_LAST_ERR [chars]: Error in sysdb_directory_get_last

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-SYSDB_ERR_MSG [chars]: [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-SYSDB_ERR_MSG [chars]: [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-SYSDB_FAIL_ERR [chars]: Failed: [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-SYSDB_FAIL_ERR [chars]: Failed: [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-SYSDB_REGISTER_EDM_ERR [chars]: sysdb_register_edm failed with error [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-TRAILING_WHITESPACE_IN_KEY WARNING: The RADIUS server key '[chars]' contains trailing whitespace.

Explanation    This warning is issued in case the user did not intend for there to be trailing whitespace in the server key.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-VSA_BITMAP_ERROR inconsistent bits in bitmap [hex], nas-to-daemon table entry [dec].

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-VSA_BITMAP_ERROR inconsistent bits in bitmap [hex], nas-to-daemon table entry [dec].

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-VSA_FORMAT_ERR1 daemon VSA [dec] does not match type string in [chars].

Explanation    VSA format error in daemon user config.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-VSA_FORMAT_ERR1 daemon VSA [dec] does not match type string in [chars].

Explanation    VSA format error in daemon user config.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-VSA_FORMAT_ERR2 parsing error on daemon VSA: [chars]. no protocol or type field.

Explanation    VSA format error in daemon user config.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-VSA_FORMAT_ERR2 parsing error on daemon VSA: [chars]. no protocol or type field.

Explanation    VSA format error in daemon user config.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-VSA_FORMAT_ERR3 parsing error on daemon VSA [chars]. No value field or invalid length

Explanation    VSA format error in daemon user config.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-VSA_FORMAT_ERR3 parsing error on daemon VSA [chars]. No value field or invalid length

Explanation    VSA format error in daemon user config.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-VSA_FORMAT_ERR4 parsing error on daemon VSA [chars]. order number [dec] (not 0-254) is not supported.

Explanation    VSA format error in daemon user config.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-VSA_FORMAT_ERR4 parsing error on daemon VSA [chars]. order number [dec] (not 0-254) is not supported.

Explanation    VSA format error in daemon user config.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-VSA_FORMAT_ERR5 parsing error on daemon VSA [chars]. invalid type field.

Explanation    VSA format error in daemon user config.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-VSA_FORMAT_ERR5 parsing error on daemon VSA [chars]. invalid type field.

Explanation    VSA format error in daemon user config.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-VSA_NOTFOUND VSA [dec] not found in daemon-to-nas tables after string comparing. VSA [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-VSA_NOTFOUND VSA [dec] not found in daemon-to-nas tables after string comparing. VSA [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-VSA_PROTO_MISMATCH daemon VSA has a different protocol ([chars]) than client ([chars]).

Explanation    VSA format error in daemon user config.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-VSA_PROTO_MISMATCH daemon VSA has a different protocol ([chars]) than client ([chars]).

Explanation    VSA format error in daemon user config.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-VSA_TABLE_ERROR table [chars] entry [dec] has inconsistent ignore flag and std_type.

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-3-VSA_TABLE_ERROR table [chars] entry [dec] has inconsistent ignore flag and std_type.

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-4-RADIUS_NOSERV Warning: Server [chars]/[dec]/[dec] is not defined

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-4-RADIUS_NOSERV_ALT Warning: Server [chars]:[dec],[dec] is not defined

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-4-SYSDB_ITEM [chars] '[chars]'. Error: [chars]

Explanation    The client library failed to carry out the desired request on a SysDB item or directory.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-4-TRAILING_WHITESPACE_IN_KEY WARNING: The RADIUS server key '[chars]' contains trailing whitespace.

Explanation    This warning is issued in case the user did not intend for there to be trailing whitespace in the server key.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-4-WARN_IN_SG Warning: Server [chars]:[dec],[dec] is still referenced by server group.

Explanation    A RADIUS server has been removed which is still included in a server group.

Recommended Action    The server group which references the removed server should be edited to remove the reference, or the removed server should be added back to the list of RADIUS hosts.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-4-WARN_IN_SG Warning: Server [chars]:[dec],[dec] is still referenced by server group.

Explanation    A RADIUS server has been removed which is still included in a server group.

Recommended Action    The server group which references the removed server should be edited to remove the reference, or the removed server should be added back to the list of RADIUS hosts.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-BAD_ARG [chars]: found invalid input argument(s).

Explanation    An internal software error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-BAD_ARG [chars]: found invalid input argument(s).

Explanation    An internal software error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-BAD_ATTR_LENGTH [chars]: found attr with bad length [dec], attr ignored.

Explanation    An internal software error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-BAD_ATTR_LENGTH [chars]: found attr with bad length [dec], attr ignored.

Explanation    An internal software error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-BAD_ATTR_TYPE [chars]: found attr with bad type [dec], attr ignored.

Explanation    An internal software error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-BAD_ATTR_TYPE [chars]: found attr with bad type [dec], attr ignored.

Explanation    An internal software error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-ERR_ACCT_ID [chars]: can't convert task id to accounting session id: [chars]

Explanation    Task id is probably larger than 2^24 - 1

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-ERR_ACCT_ID [chars]: can't convert task id to accounting session id: [chars]

Explanation    Task id is probably larger than 2^24 - 1

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-ERR_BAD_REPLY_ATTR [chars]: reply attr size=[dec] not equal to sum of parts=[dec]

Explanation    The length of the reply attribute does not equal its parts.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-ERR_BAD_REPLY_ATTR [chars]: reply attr size=[dec] not equal to sum of parts=[dec]

Explanation    The length of the reply attribute does not equal its parts.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-ERR_BAD_SESSID_ATTR [chars]: Using incorrect AAA attribute for RAD_ACCT_SESSID_ATTR [chars]

Explanation    Check consistancy between radius_table and nas_to_daemon_av_table

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-ERR_BAD_SESSID_ATTR [chars]: Using incorrect AAA attribute for RAD_ACCT_SESSID_ATTR [chars]

Explanation    Check consistancy between radius_table and nas_to_daemon_av_table

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-ERR_LEAFTIMER Cannot allocate leaf timer - [chars]

Explanation    None at this time

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-ERR_LEAFTIMER [chars]: cannot allocate leaf timer

Explanation    None at this time

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-ERR_MASTERTIMER [chars]: cannot allocate master timer

Explanation    None at this time

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-ERR_MASTERTIMER [chars]: cannot allocate master timer

Explanation    None at this time

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-ERR_NOPIPE [chars]: pipe creation failure

Explanation    None at this time

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-ERR_NOPIPE [chars]: pipe creation failure

Explanation    None at this time

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-ERR_NOSERVERS [chars]: no radius servers in find_next

Explanation    None at this time

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-ERR_NOSOCKET [chars] Could not watch socket fd errno [dec]

Explanation    None at this time

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-ERR_NOSOCKET [chars] Could not watch socket fd errno [dec]

Explanation    None at this time

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-ERR_NOSOCKETD [chars] Socket descriptor not allocated

Explanation    None at this time

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-ERR_NOSOCKETD [chars] Socket descriptor not allocated

Explanation    None at this time

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-ERR_SERVERFAIL [chars]: can't launch mq_server: [chars]

Explanation    None at this time

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-ERR_SERVERFAIL [chars]: can't launch mq_server: [chars]

Explanation    None at this time

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-ERR_SOCKET_BIND_FAIL Error in binding socket: [chars]

Explanation    None at this time

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-ERR_SOCKETFAIL Error in opening socket, Errorno : [dec]

Explanation    None at this time

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-ERR_SOCKETFAIL Error in opening socket, Errorno : [dec]

Explanation    None at this time

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-ERR_SYSDBINIT [chars] Could not initialise with SysDB

Explanation    None at this time

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-ERR_SYSDBINIT [chars] Could not initialise with SysDB

Explanation    None at this time

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-EVENT_CONN_DESTROY_FAILED [chars]: A call to [chars] failed with error code [dec]: '[chars]'.

Explanation    An internal software error occured

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-EVENT_CONN_DESTROY_FAILED [chars]: A call to [chars] failed with error code [dec]: '[chars]'.

Explanation    An internal software error occured

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-EVENT_CONN_INIT_FAILED Failed to initialize event connection for [chars] (error: [chars])

Explanation    An internal software error occured

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-FUNC_USAGE_ERROR [chars]: should not be called for Cisco VSA processing.

Explanation    An internal software error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-FUNC_USAGE_ERROR [chars]: should not be called for Cisco VSA processing.

Explanation    An internal software error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-IFMGR_BIND_FAILED [chars]: A call to im_control_server_bind() returned error code [dec]: '[chars]'. A connection to the interface manager could not be made.

Explanation    An internal software error occured.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-IFMGR_BIND_FAILED [chars]: A call to im_control_server_bind() returned error code [dec]: '[chars]'. A connection to the interface manager could not be made.

Explanation    An internal software error occured.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-INTRFC_STATE_QUERY_FAILED [chars]: For interface [chars] im_state_query() returned error code [dec]: '[chars]'. Source interface was not applied.

Explanation    An internal software error occured.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-INTRFC_STATE_QUERY_FAILED [chars]: For interface [chars] im_state_query() returned error code [dec]: '[chars]'. Source interface was not applied.

Explanation    An internal software error occured.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-INVALID_AUTHOR_TYPE [chars]: found invalid author type [dec]

Explanation    An internal software error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-INVALID_AUTHOR_TYPE [chars]: found invalid author type [dec]

Explanation    An internal software error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-INVALID_VSA [chars]: found invalid VSA. attr [dec] ignored.

Explanation    An internal software error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-INVALID_VSA [chars]: found invalid VSA. attr [dec] ignored.

Explanation    An internal software error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-IP_ADDRESS_NOT_FOUND WARNING: There is no ip address configured for [chars]. Using RADIUS default address instead.

Explanation    There is not ip address configured for the specified interface.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-IP_ADDRESS_NOT_FOUND WARNING: There is no ip address configured for [chars]. Using RADIUS default address instead.

Explanation    There is not ip address configured for the specified interface.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-LEN_TOO_LONG [chars] value length exceeds limit[chars].

Explanation    An internal software error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-LEN_TOO_LONG [chars] value length exceeds limit[chars].

Explanation    An internal software error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-NO_CMD [chars]: cannot get valid cmd from req [chars].

Explanation    An internal software error occured.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-NULL_REQ [chars]: found NULL request pointer.

Explanation    An internal software error occured.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-SNPRINTF_FAIL [chars]: snprintf failed with rc=[dec]. [chars]

Explanation    An internal software error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-SNPRINTF_FAIL [chars]: snprintf failed with rc=[dec]. [chars]

Explanation    An internal software error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-UNSUPPORTED_VENDOR [chars]: found unsupported vendor id [dec]. VSA ignored.

Explanation    An internal software error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-RADIUSD-6-UNSUPPORTED_VENDOR [chars]: found unsupported vendor id [dec]. VSA ignored.

Explanation    An internal software error has occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

SAM Messages

Error Message     
 
    
    
   

%SECURITY-SAM-3-ERR_COPY_CRL Error copying CRL from [chars] to [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-3-ERR_DEL_CA_CERT Failed to delete CA certificate from SysDB [chars] during merge oper

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-3-ERR_FILE_MD5 Failed in MD5 operation for file: [chars], [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-3-ERR_FILE_STAT Error in file stat operation: [chars], [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-3-ERR_INVALID_DEVICE Invalid device name '[chars]'

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-3-ERR_INVALID_PARAMETER Invalid parameters being passed: [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-3-ERR_NO_DIGESTINDEX_VALUE Installed file, [chars], does not have SAM index entry

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-3-ERR_NO_MEMORY Out of memory

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-3-ERR_OPEN_FILE Failed opening file: [chars], [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-3-ERR_RD_FILE Failed reading file: [chars], [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-3-ERR_REG_MSGNO Could not register SAM_MSGNO message handler for message id [dec]: [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-3-ERR_RESTORE_LOG_ENCODE Failed to encode bag for log entry [dec] during restore, [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-3-ERR_SYSDB_GET Failed to get item [chars] in SysDB: [hex], [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-3-ERR_SYSDB_SET Failed to set item [chars] in SysDB: [hex], [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-3-ERR_UNKNOWN_PULSE Detected receiving an unknown pulse code ([dec])

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-3-ERR_WR_FILE Failed writing file : [chars], [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-3-WARN_NVRAM NVRAM is not available, nvram process might have been down.

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-3-WARN_SPM SPM is not available, [chars].

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-4-CAUGHT_SIGNAL server terminating..

Explanation    SAM server caught a signal, and terminated

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-4-NO_BK_LOG SAM log backup file is not present, will try to recover the backup log from SysDB

Explanation    For some reason, the backup file of SAM log has disappeared.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-4-SYSDB_INTEGRITY Cannot guarantee the integrity of SAM SysDB name space, SAM internal tables had been discarded, and will try to recover from backup files.

Explanation    Found digest mistmatch for SAM's SysDB name space, the SAM portion of SysDB had been deleted. If SAM backup files exists, this should not impact SAM's functionality; otherwise, CA root certificate and CRL will be lost

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-4-WARN_CA_CERT_EXPIRED SAM detects the CA certificate had expired, but accepted by user

Explanation    SAM found the expired CA certificate in table had been accepted by user.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-4-WARN_CSS_CERT_EXPIRED SAM detects the PIE certificate had expired, but accepted by user

Explanation    SAM found the expired CSS certificate in table had been accepted by user.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-6-ERR_1_PARAM [chars]

Explanation    SAM general error message with one prameter.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-6-ERR_2_PARAM [chars], [chars]

Explanation    SAM general error message with two prameters.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-6-WARN_CHANGE_NOT_PERSISTENT SAM found no ENA device with sufficient space to backup the modified SAM table, the change will not be persistent until a successful ENA installation on a flash device.

Explanation    SAM found there is nowhere to backup the modified SAM table.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-6-WARN_DIGEST_FILE_MISSING Secure digest file is not found, cannot guarantee the integrity of memory installed files.

Explanation    SAM found digest file in NVRAM is missing, discard the memory packages.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-6-WARN_DIGEST_FILE_REINIT Secure digest file not present, SAM will re-init the secure digest file

Explanation    SAM found digest file missing from NVRAM, re-init the file.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-6-WARN_INIT_LOG_BACKUP_FILE SAM failed to initialize log backup file

Explanation    SAM failed to initalize log backup file in NVRAM, log entry not backed up

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-6-WARN_MEM_DIGEST SAM will remove backup files for memory digest tables and users MUST re-install the memory packages.

Explanation    SAM found MEM digest compare not successful, discard the memory packages.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-6-WARNING [chars]

Explanation    SAM general warning message.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-6-WARNING_INSECURE_FLASH_FILE [chars] is detected insecure, backup not restored

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SAM-6-WARNING_UNMATCH_DIGEST [chars] has been changed since last installed.

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

sIMP Messages

Error Message     
 
    
    
   

%SECURITY-sIMP-3-FATAL_ERR [chars]

Explanation    An internal software fatal error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-sIMP-4-ITI_WARN [chars] [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-sIMP-4-MSG_WARN [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

SPM Messages

Error Message     
 
    
    
   

%SECURITY-SPM-3-ERR_CHAN_CONNECT Message chan connect ([chars]) failed

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SPM-3-ERR_ENTRY_FIND Unable to find a delete entry for : [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SPM-3-ERR_INVALID_EVENT SPM server received invalid event : [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SPM-3-ERR_MALLOC Cannot allocate memory in function [chars]()

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SPM-3-ERR_MSG_GEN [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SPM-3-ERR_OPEN_SECURE Error in opening secure file : [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SPM-3-ERR_PTHREAD_CREATE pthread create error : [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SPM-3-ERR_PTHREAD_INIT pthread attr init error : [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SPM-3-ERR_PTHREAD_SET pthread set detach state error : [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SPM-3-ERR_PULSE_CODE Unknown pulse code ([dec]) received

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SPM-3-ERR_REG_HANDLER Could not register async handlers : [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SPM-3-ERR_REG_MSG Could not register SPM_MSGNO message handler for message id - [dec] : [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SPM-3-ERR_REPLY_FAIL Could not reply to client message : [chars]

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SPM-3-ERR_TOKEN_MISMATCH Delete file [chars] token mismatch

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

SSHD Messages

Error Message     
 
    
    
   

%SECURITY-SSHD-3-ERR_DETAILS [chars] [chars] [chars]

Explanation    Error description, client address, error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SSHD-3-ERR_ERRNO [chars] [chars]

Explanation    Error description, error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SSHD-3-ERR_GENERAL [chars]

Explanation    SSH encounterd some error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SSHD-3-ERR_MALLOC Cannot allocate memory in function [chars]()

Explanation    Internal error. System is out of memory - malloc failed.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SSHD-3-ERR_SYSDB_BIND Cannot bind to sysdb in function [chars]()

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SSHD-3-ERR_SYSDB_DATALIST Cannot get datalist in function [chars]()

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SSHD-3-ERR_SYSDB_DELETE sysdb_item_delete failed for tuple [chars] in function [chars]()

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SSHD-3-ERR_SYSDB_GET sysdb_item_get failed for tuple [chars] in function [chars]()

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SSHD-3-ERR_SYSDB_PACK Cannot pack tuple in function [chars]()

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SSHD-3-ERR_SYSDB_SET sysdb_item_set failed for tuple [chars] in function [chars]()

Explanation    Internal error.

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%SECURITY-SSHD-6-INFO_GENERAL [chars]

Explanation    The sshd encountered some problem in genric nature or plain information.

Recommended Action    'No action is required.'

TACACSD Messages

Error Message     
 
    
    
   

%SECURITY-TACACSD-3-BAG_ENCODE_ERR Failed to encode bag information for '[chars]' - [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-3-BAGS_UNREG_ERR Failed to unregister bags - [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-3-EDM_INIT_ERR Failed to register EDM - [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-3-ERR_ATTACH_SOCK Unable to attach an event handler for socket [dec] - [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-3-ERR_CONFIG_GLOBAL Error while setting or unsetting TACACS+ [chars] configuration - [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-3-ERR_CONFIG_SERVER Error while setting or unsetting [chars] in a server entry - [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-3-ERR_CREATE_SERVER_ENTRY Cannot create a TACACS+ server entry - [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-3-ERR_CREATE_SGSERVER Unable to add the server '[chars]' to group '[chars]' - [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-3-ERR_CREATESG Unable to create the server group '[chars]' - [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-3-ERR_DELETE_SGSERVER Unable to delete the server '[chars]' from group '[chars]' - [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-3-ERR_DELETESG Unable to delete the server group '[chars]' - [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-3-ERR_SYSDBBIND Failed to bind to SysDB for path [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-3-EVENT_ASYNC_ATTACH_FAIL_ERR Failed to initialize timer for [chars] - [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-3-GENERIC_ERROR [chars]: [chars]

Explanation    Error message from tacacs_debug routine

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-3-IFMGR_BIND_FAILED Failed to bind to IM while setting source interface as [chars] - [chars]

Explanation    An internal software error occured.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-3-MEMORY Failed to allocate [unsigned int] bytes while [chars]

Explanation    The client library has failed to allocate the required amount of memory.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-3-MSG_SIZE_ERR [chars]: size [dec] - [chars]

Explanation    An internal error occurred

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-3-NO_MEM_ERR [chars]: failed to allocate memory

Explanation    An internal software error occured.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-3-PARAMETER [chars]

Explanation    The client library was passed an invalid parameter.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-3-PROBE_THREAD_CREATE_FAILED Unable to create thread to probe status of TACACS+ server [chars]/[dec]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-3-RESOURCE_CERRNO [chars] (error: [chars])

Explanation    The client library failed to use a resource of one of its (cerrno-returning) libraries.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-3-SETPRIO_FAILED Failed to change server priority - [chars]

Explanation    Attempt to change priority failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-4-IFHANDLE_NULL WARNING: Cannot obtain handle for the interface [chars]: [chars]

Explanation    Error encountered while obtaining handle for the interface specified as the source interface.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-4-NO_IP_ADDRESS WARNING: No IP address has been configured for [chars]

Explanation    There is no IP address configured for the specified interface.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-4-NOSUCH_INTF WARNING: Specified source interface [chars] is not present: [chars]

Explanation    The interface specified as source interface is not present.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-4-SRCINTF_NOTUP WARNING: Specified source interface [chars] is not UP

Explanation    The interface specified as source interface is not UP.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-4-TACACS_NOSERV Warning: Server [chars] is not configured

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-4-WARN_IN_SG WARNING: Server [chars] is still referenced by server group

Explanation    A TACACS+ server has been removed which is still included in a server group.

Recommended Action    The server group which references the removed server should be edited to remove the reference, or the removed server should be added back to the list of TACACS+ hosts.

Error Message     
 
    
    
   

%SECURITY-TACACSD-6-INTRFC_STATE_QUERY_FAILED Failed to apply source interface for [chars] - [chars]

Explanation    An internal software error occured.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-6-NO_CMD No valid command provided for [chars]

Explanation    An internal software error occured.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-6-NULL_REQ Encountered a NULL request pointer while [chars]

Explanation    An internal software error occured.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-6-SERVER_DOWN TACACS+ server [chars]/[dec] is DOWN - [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%SECURITY-TACACSD-6-TIMEOUT_IGNORED A time out event has been ignored

Explanation    An internal software error occured.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.