Cisco IOS XR System Error Message Reference Guide, Release 3.2
Fabric (FABRIC) Error Messages for Cisco IOS XR
Downloads: This chapterpdf (PDF - 444.0KB) The complete bookPDF (PDF - 10.75MB) | Feedback

Fabric Messages

Table Of Contents

Fabric Messages

FAB_LC Messages

FAB_SVR Messages

FABQ Messages

FABRIC_DRVR_ALARM Messages

FABRIC_DRVR Messages

FABRICQ_MGR Messages

FABRICQ Messages

FDI Messages

FGID_AGG Messages

FGID_ALLOC Messages

FGID_BCDL_CONSUMER Messages

FGID_BITMASK Messages

FGID_LIB Messages

FGID_SVR Messages

FSDB Messages

FSDBLIB Messages

FSTATSA Messages

FSTATSC Messages

FSTATSS Messages


Fabric Messages


This section contains all Fabric (hardware and software both) related System Error Messages. The following facility codes are represented in this module:

FAB_LC Messages

FAB_SVR Messages

FABQ Messages

FABRIC_DRVR_ALARM Messages

FABRIC_DRVR Messages

FABRICQ_MGR Messages

FABRICQ Messages

FDI Messages

FGID_AGG Messages

FGID_ALLOC Messages

FGID_BCDL_CONSUMER Messages

FGID_BITMASK Messages

FGID_LIB Messages

FGID_SVR Messages

FSDB Messages

FSDBLIB Messages

FSTATSA Messages

FSTATSC Messages

FSTATSS Messages

FAB_LC Messages

Error Message     
 
    
    
   

%FABRIC-FAB_LC-3-FATAL fab_lc: fatal error encountered, reason=[chars]

Explanation    The LC fabric driver could not create a required resource for proper operation.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

FAB_SVR Messages

Error Message     
 
    
    
   

%FABRIC-FAB_SVR-3-EVM_INIT_FAIL Event manager creation failed in the Fabric server

Explanation    This indicates event manager creation is failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FAB_SVR-3-FATAL [chars] : [chars]

Explanation    This indicates fatal error occured

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FAB_SVR-7-DEBUG_INIT_FAIL [chars]: Debug initialization for the fab_svr/[chars] event failed: [chars]

Explanation    An error was returned when the fabric server called the debug_init_event() function.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FAB_SVR-7-DEBUG_REGISTER_FAIL [chars]: Debug registration for Fab server driver failed: [chars]

Explanation    An error was returned when the fabric server called the debug_register() function.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

FABQ Messages

Error Message     
 
    
    
   

%FABRIC-FABQ-3-FATAL FABQ: fatal error encountered, reason=[chars]

Explanation    Fabric Queue Driver encountered a fatal error and is not able recover from the error. A reason text will be supplied. Call support with this text.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABQ-3-PKT_INIT_FAIL PKT_INIT: [chars] failed, rc=[dec], reason:[chars]

Explanation    Packet carving function has failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABQ-3-PKT_INIT_POOL PKT_INIT: particle_multi_pool_define failed ([chars]), rc=[dec], reason:[chars]

Explanation    Initial carving of a packet particle pool has failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABQ-3-SHOW_ERR FABQ_SHOW: fatal error encountered: [chars]

Explanation    Error while executing a show command

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABQ-6-PKT_INIT_INFO PKT_INIT: pak mem size:[hex], pak mem start: [hex], pak scaling:[dec]

Explanation    Information on packet memory carving

Recommended Action    This is information and does not require any correction.

FABRIC_DRVR_ALARM Messages

Error Message     
 
    
    
   

%FABRIC-FABRIC_DRVR_ALARM-3-BM_MAJOR FABRIC DRVR alarm: [chars]

Explanation    FABRIC DRVR, error in BM

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRIC_DRVR_ALARM-3-CCS_MAJOR FABRIC DRVR alarm: [chars]

Explanation    FABRIC DRVR, error in CCS

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRIC_DRVR_ALARM-3-FCM_MAJOR FABRIC DRVR alarm: [chars]

Explanation    FABRIC DRVR, error in FCM

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRIC_DRVR_ALARM-3-FFM_MAJOR FABRIC DRVR alarm: [chars]

Explanation    FABRIC DRVR, error in FFM

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRIC_DRVR_ALARM-3-MCQM_MAJOR FABRIC DRVR alarm: [chars]

Explanation    FABRIC DRVR, error in MC Queue Manager

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRIC_DRVR_ALARM-3-MCQM_MINOR FABRIC DRVR alarm: [chars]

Explanation    FABRIC DRVR, error in MC Queue Manager

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRIC_DRVR_ALARM-3-OS_MAJOR FABRIC DRVR alarm: [chars]

Explanation    FABRIC DRVR, error in OS

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRIC_DRVR_ALARM-3-RX_PIPE_MAJOR FABRIC DRVR alarm: [chars]

Explanation    FABRIC DRVR, error in RX PIPE

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRIC_DRVR_ALARM-3-TX_PIPE_MAJOR FABRIC DRVR alarm: [chars]

Explanation    FABRIC DRVR, error in TX PIPE

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRIC_DRVR_ALARM-3-UCQM_MAJOR FABRIC DRVR alarm: [chars]

Explanation    FABRIC DRVR, error in UC Queue Manager

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

FABRIC_DRVR Messages

Error Message     
 
    
    
   

%FABRIC-FABRIC_DRVR-0-INIT_FAILED_FATAL A non-recoverable error occured during startup ([chars]). Fabric plane down

Explanation    An error occurred during driver initialisation such that this fabric board cannot be brought up. This error is non-recoverable, and as such the fabric board cannot be bought up.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRIC_DRVR-3-ASIC_ERROR ASIC ID: [chars]: [chars]

Explanation    This indicates an error has occured in Switching element ASIC

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRIC_DRVR-3-ASIC_NOTIF ASIC ID: [chars]: [chars]; Oper Status: [chars]

Explanation    This indicates a Switching element ASIC has changed its operational status

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRIC_DRVR-3-ATOMIC_QUEUE_ENQUEUE_ERROR atomic queue enqueue error, no space in ring, count: [dec], ring: [dec]

Explanation    This indicates non fatal error occured

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRIC_DRVR-3-BP_CFG_ERROR [chars]: Error in Back pressure configuration, BP Groups : [dec], [dec], [dec]

Explanation    This indicates BP configuration recieved from the fabric control software incorrect. If this condition prevails, it could impact data traffic when fabric get congested.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRIC_DRVR-3-ERROR [chars]

Explanation    This indicates non fatal error occured

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRIC_DRVR-3-ERRRATE_EXCEED_GLACIAL [chars]

Explanation    FABRIC error message

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRIC_DRVR-3-ERRRATE_EXCEED_NO_LIMIT [chars]

Explanation    FABRIC error message

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRIC_DRVR-3-ERRRATE_EXCEED_SLOW [chars]

Explanation    FABRIC error message

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRIC_DRVR-3-EVENT_FAIL Event manager creation failed in the FABRIC driver

Explanation    This indicates event manager creation has failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRIC_DRVR-3-FATAL [chars]

Explanation    This indicates fatal error occured

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRIC_DRVR-3-FDI_CLIENT [chars]: FABRIC driver could not setup FDI client library: [chars]

Explanation    The fdi client library returned the above error. Without the FDI client library, the FABRIC driver can not function correctly and will therefore restart.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRIC_DRVR-3-INIT_FAILED Initialisation of driver failed: [chars]. Driver will be restarted

Explanation    An error occurred during driver initialisation such that this fabric board cannot be brought up. The string following the initial message details the reason for failure. After a short period of time another attempt will be made to start the driver.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRIC_DRVR-3-INTR_ATTACH [chars]: FABRIC driver could not attach interupt handler to hardware: [chars]

Explanation    The driver attempted to attach the interupt handler to the hardware and failed. Because of this failure, the interupt thread will not be able to receive the interupt thread events. The driver will restart to attempt to clear the problem.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRIC_DRVR-3-INTR_EVENT_MGR [chars]: FABRIC driver could not setup an event manager on the path: [chars]

Explanation    The event manager creation call for the given path has failed. Without this event manager, the interupt thread cannot function. Because of this, the driver will restart.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRIC_DRVR-3-INTR_THREAD [chars]: FABRIC driver could not setup the interupt thread: [chars]

Explanation    This indicates the thread creation has failed. This thread is used for all ASIC interupts into the driver. The driver can not perform its required functions without this ability and will therefore restart.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRIC_DRVR-3-INTR_UNMASK [chars]: FABRIC driver could not unmask interupt bits: [chars]

Explanation    The driver attempted to unmask required interupt mask bits and failed. Because of this failure, the interupt thread will not be able to receive the interupt thread events. The driver will restart to attempt to clear the problem.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRIC_DRVR-3-LINK_SHUT_DOWN Link: [chars]: Shutdown: [chars]

Explanation    This indicates an error has occured in Fabric Switching Element links

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRIC_DRVR-3-MUTEX_ERROR ASIC ID: [chars]: Failed to [chars] [chars] mutex, [chars]

Explanation    This indicates an error has occured in Switching element ASIC

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRIC_DRVR-3-NOTIFY_ERROR Error in sending notification messages, rc=[dec],[chars], source: [chars]

Explanation    This indicates system error has occured while sending notification messages to fabric control software

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRIC_DRVR-3-PLD_UPGRADE Fatal Error: Check fabric PLD rev 0x1c or above is present

Explanation    This indicates fatal error occured in the fabric board due to having older revision of PLD image.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRIC_DRVR-3-POD_INIT Failed to [chars] POD (node: [hex], module: [hex], asic: [unsigned int], POD: [unsigned int]). [chars]

Explanation    Despite making several attempts, the switch fabric ASIC driver was unable to initialize one of the POD hardware modules. This may result in degraded switch fabric performance.

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRIC_DRVR-3-THREAD_CTL [chars]: FABRIC driver could not change interupt thread to an IO thread: [chars]

Explanation    The driver attempted to change the interupt thread so that it could receive the IO messages. Because of this failure, the interupt thread will not be able to receive the interupt thread events. The driver will restart to attempt to clear the problem.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRIC_DRVR-3-TIMER [chars]: FABRIC driver could not setup time thread: [chars]

Explanation    This indicates thread creation has failed. This thread is used for statistics gathering and timer based link bringup. Since link bringup is critical to driver operation, the driver will restart.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRIC_DRVR-4-DRAIN_LINK_ERR [chars] has [dec] drain links, Choosen drain link: [chars]

Explanation    Fabric element ASICs supposed to leave one link to drain queued cells when all the links associated with a queue is shut. If there are more than one link is left as a drain links, then this warning will be printed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRIC_DRVR-4-EVENT_INIT_FAIL Event connection creation failed in the FABRIC driver: [chars]

Explanation    This event connection creation failed in the EDM initialization section. This does not directly affect driver operation, but show commands will not be available.

Recommended Action    Check system closely for other fabric failures and correct. Contact support to deal with the EDM problem.

Error Message     
 
    
    
   

%FABRIC-FABRIC_DRVR-4-EVENT_NOTIFY_FAIL Event connection notifcation setup failed in the FABRIC driver: [chars]

Explanation    This event connection notification setup failed in the EDM initialization section. This does not directly affect driver operation, but show commands will not be available.

Recommended Action    Check system closely for other fabric failures and correct. Contact support to deal with the EDM problem.

Error Message     
 
    
    
   

%FABRIC-FABRIC_DRVR-4-LTRACE_FAIL [chars]: Failed to setup a trace buffer for ltrace: [chars]

Explanation    The given error occured while trying to setup the ltrace buffers. Because of the, ltrace show commands will not be available from the FABRIC driver. This does not interfere with driver operation, but does limit diagnostic abilities considerably.

Recommended Action    Check system closely for other fabric failures and correct. Contact support to deal with the ltrace problem.

Error Message     
 
    
    
   

%FABRIC-FABRIC_DRVR-6-ASIC_INITIALIZED Fabric ASICs initialized

Explanation    This indicates Fabric ASICs are initialized

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRIC_DRVR-6-FAB_MODULE [chars]

Explanation    This is to give infomation regarding fabric module type

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRIC_DRVR-6-RSERR RS error: [chars] [dec] [dec] [dec]

Explanation    This indicates RS errors

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRIC_DRVR-7-ASIC_ACCESS_UNDER_RESET Access to [chars] while ASIC being reset: [hex] ([hex])

Explanation    A read/write access was made to an ASIC which was being reset

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRIC_DRVR-7-DEBUG_INIT_FAIL [chars]: Debug initialization for the fabric_drvr/[chars] event failed: [chars]

Explanation    An error was returned when the FABRIC driver called the debug_init_event() function.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRIC_DRVR-7-DEBUG_REGISTER_FAIL [chars]: Debug registration for FABRIC driver failed: [chars]

Explanation    An error was returned when the FABRIC driver called the debug_register() function.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRIC_DRVR-7-ERRRATE_EXCEED_DEBUG [chars]

Explanation    FABRIC error messages for debugging purpose.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRIC_DRVR-7-LINK_ERROR Topology mismatch for [chars]

Explanation    The upstream information received from idle cell on this link

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRIC_DRVR-7-S1_LINK_ERROR_INFO Reg: [dec] [dec] [dec] FSDB: [dec] [dec] [dec]

Explanation    Expected topology and received topology

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRIC_DRVR-7-S2_3_LINK_ERROR_INFO Reg: [dec] [dec] [dec] [dec] FSDB: [dec] [dec] [dec] [dec]

Explanation    Expected topology and received topology

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

FABRICQ_MGR Messages

Error Message     
 
    
    
   

%FABRIC-FABRICQ_MGR-3-DEBUG1 fabricq_mgr: [chars] [hex]([hex])

Explanation    fabricq_mgr debug message

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRICQ_MGR-3-DEBUG2 fabricq_mgr: [chars]

Explanation    fabricq_mgr debug message

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRICQ_MGR-3-FATAL fabricq_mgr: fatal error encountered, reason=[chars]

Explanation    iq manager encountered a fatal error and is not able recover from the error. A reason text will be supplied call support with this text.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRICQ_MGR-3-FATAL_2 fabricq_mgr: fatal error encountered, reason=[chars], errno=[dec]

Explanation    fabricq_mgr encountered a fatal error and is not able to recover from the error. A reason text will be supplied call support with this text. An integer errno will also be printed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRICQ_MGR-3-GEN_INFO fqm: general information,

Explanation    The fabricq_mgr informational message.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRICQ_MGR-3-INFO fabricq_mgr: [chars]

Explanation    The fqm encountered an error that would lead to degraded service.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRICQ_MGR-3-MALLOC_FAILED fabricq_mgr: fatal memory allocation error for bytes

Explanation    fabricq_mgr encountered a fatal memory allocation error

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%FABRIC-FABRICQ_MGR-3-NOT_YET_IMPLEMENTED fabricq_mgr: this function is not yet implemented

Explanation    fabricq_mgr, a function was not implemented.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRICQ_MGR-3-USAGE fabricq_mgr: invalid option passed to fabricq server

Explanation    Startup option supplied to fabricq_mgr is not valid.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRICQ_MGR-4-LTRACE_FAIL [chars]: Failed to setup a trace buffer for ltrace: [chars]

Explanation    The given error occured while trying to setup the ltrace buffers. Because of the, ltrace show commands will not be available from the fabricq manager. This does not interfere with driver operation, but does limit diagnostic abilities considerably.

Recommended Action    Check system closely for other fabric failures and correct. Contact support to deal with the ltrace problem. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

FABRICQ Messages

Error Message     
 
    
    
   

%FABRIC-FABRICQ-2-FCRAM_BIST_FAILURE fcram bist failure on channel: [dec], count: [dec], error_addr: [hex]

Explanation    Sprayer encountered an bist test error indicated.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRICQ-2-FI_TOPOLOGY Fabric topology inconsistency detected for ASIC [unsigned int] link [unsigned int] (observed topology information: [hex], expected: [hex])

Explanation    An inconsistency between the expected and observed topologies of the fabric was detected.

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-2-FSDB_FABADDR_FAILED fsdb_fabric_address_from_node api failed, retry count: [dec]

Explanation    API Failure

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-2-SPI_FBP_CLUSTER_NOT_ENABLED fabric backpressure cluster not enabled : [dec]

Explanation    API Failure

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-ADDRESS_ERROR fabricq: Major error in [chars], Hardware detected an address error on fabricq asic [dec]

Explanation    Fabricq Asic encountered a memory address error

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-CORRECTABLE_ERROR fabricq: Minor error: [chars], Hardware detected a single bit error on fabricq asic [dec] and has corrected it

Explanation    Fabricq Asic encountered a memory correctable error

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-CORRECTABLE_RESET_ERROR fabricq: Major error: [chars], Hardware detected many single bit errors on fabricq asic [dec]

Explanation    Fabricq Asic encountered a memory correctable error

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-CRITICAL fabricq: Critical error: [chars], [dec]

Explanation    fabricq, Critical alarm

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-CTX_CORRECTABLE_ERROR fabricq: Major error in PCL CTX, Hardware detected many single bit errors on fabricq asic [dec]. Details of last error: [hex] spo_pcl_reg_cr_ea [hex]

Explanation    Fabricq Asic encountered a large number of correctable memory errors

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-CTX_UNCORRECTABLE_ERROR fabricq: Major error in PCL CTX, Hardware detected many multi bit errors on fabricq asic [dec]. Details of last error: spo_pcl_reg_cr_ea [hex] [hex] spo_pcl_mem_pp_cr [hex] [hex]

Explanation    Fabricq Asic encountered a large number of correctable memory errors recommended_action: *SUPPORT*

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-DEBUG1 fabricq: [chars] [dec]([hex])

Explanation    Fabricq Asic debug message

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-DEBUG2 fabricq: [chars]

Explanation    Fabricq Asic debug message

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-DMA_ERROR fabricq: Error during DMA transfer: Source Addr [hex], Dest Addr [pointer]

Explanation    An error occurred while a DMA transfer initiated by the FQM process was taking place. This means certain data requested by the FQM process will not be available.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-DMA_TIMED_OUT fabricq: DMA transfer timed out: Source Addr: [hex], Dest Addr: [pointer]

Explanation    A DMA transfer initiated by the FQM Process has timed out. This means that data the FQM process has requested did not become available within the timeout period.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-FATAL fabricq: Fatal error encountered: [chars], [chars]:[dec]

Explanation    Fabricq Asic driver encountered a fatal error and is not able recover from the error. A reason text will be supplied call support with this text.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-FATAL_2 fabricq: fatal error encountered, reason=[chars], errno=[dec]

Explanation    spo encountered a fatal error and is not able to recover from the error. A reason text will be supplied call support with this text. An integer errno will also be printed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-FCRAM fabricq: Major error in Fabricq ASIC [dec]. FCRAM Channel [dec] [chars] error.

Explanation    Fabricq ASIC encountered a FCRAM Channel error

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-FI_CORR_ERRORS fabricq: Major error in Fabric Interface : RS Correctable errors on Fabricq ASIC [dec] link [dec]

Explanation    Fabricq ASIC encountered link RS correctable errors exceeding threshold

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-FI_LINK_ALARM fabricq: Major error in Fabric Interface : Link Alarm on Fabricq ASIC [dec] link [dec]

Explanation    Fabricq ASIC encountered a link alarm

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-FI_PARITY_ERROR fabricq: Major error in Fabric Interface : Link Parity errors on Fabricq ASIC [dec] link [dec]

Explanation    Fabricq ASIC encountered link parity errors

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-FI_UNCORR_ERROR fabricq: Major error in Fabric Interface : RS Uncorrectable errors on Fabricq ASIC [dec] link [dec]

Explanation    Fabricq ASIC encountered a link RS uncorrectable error

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-FQM_ADDR fabricq: Major error in Fabricq ASIC [dec]. FQM memory too many address errors.

Explanation    Fabricq ASIC encountered a FQM excessive address errors

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-FQM_BR fabricq: Major error in Fabricq ASIC [dec]. FQM BR [chars] error.

Explanation    Fabricq ASIC encountered a FQM BR error

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-FQM_CORR fabricq: Major error in Fabricq ASIC [dec]. FQM memory too many correctable errors.

Explanation    Fabricq ASIC encountered a FQM excessive correctable errors

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-FQM_DENY fabricq: Major error in Fabricq ASIC [dec]. FQM [chars] Deny error, Need to recarve.

Explanation    Fabricq ASIC encountered a FQM Vital/Non vital deny error

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-FQM_PARITY fabricq: Major error in Fabricq ASIC [dec]. FQM [chars] Parity error

Explanation    Fabricq ASIC encountered a FQM parity error

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-FQM_STACK fabricq: Major error in Fabricq ASIC [dec]. FQM FQMEM Stack [chars] error.

Explanation    Fabricq ASIC encountered a FQM FQMEM Stack error

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-FQM_UNCORR fabricq: Major error in Fabricq ASIC [dec]. FQM memory too many uncorrectable errors.

Explanation    Fabricq ASIC encountered a FQM excessive uncorrectable errors

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-GEN_INFO fabricq: general information,

Explanation    The Fabricq Asic's informational message.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-INFO fabricq: service degrading error, reason = [chars]

Explanation    The fabricq asic encountered an error that would lead to degraded service.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-LINK_ALARM fabricq: Major error: [chars], Hardware detected an alarm on fabricq asic [dec]

Explanation    Fabricq Asic encountered an alarm

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-LUT_ADDR_ERROR fabricq: Major error in PCL LUT, Hardware detected an address error on fabricq asic [dec]. Details of last error: [hex] spo_pcl_reg_psm_ea_ee [hex], [hex] spo_pcl_reg_lut_ed [hex]

Explanation    Fabricq Asic encountered a large number of correctable memory errors

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-LUT_CORRECTABLE_ERROR fabricq: Major error in PCL LUT, Hardware detected many single bit errors on fabricq asic [dec]. Details of last error: [hex] spo_pcl_reg_psm_ea_ee [hex], [hex] spo_pcl_reg_lut_ed [hex]

Explanation    Fabricq Asic encountered a large number of correctable memory errors recommended_action: *SUPPORT*

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-LUT_UNCORRECTABLE_ERROR fabricq: Major error in PCL PSM, Hardware detected a multibit error on fabricq asic [dec]. spo_pcl_mem_pp_lr_[unsigned int] [hex] [hex], spo_pcl_reg_psm_ea_ee [hex] [hex], spo_pcl_reg_lut_ed [hex] [hex]

Explanation    Fabricq Asic encountered a uncorrectable memory error

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-MAJOR fabricq: Major error: [chars], [dec]

Explanation    fabricq, Major alarm

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-MALLOC_FAILED fabricq: fatal memory allocation error for bytes

Explanation    Fabricq Asic encountered a fatal memory allocation error

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-MI_BPDECODE fabricq: Major error in Fabricq ASIC [dec]. MI [chars] Backpressure decode error

Explanation    Fabricq ASIC encountered a MI Unicast/Multicast BP Decode error

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-MI_MISSING_EOP fabricq: Minor error in Fabricq ASIC [dec]. MI [chars] Missing EOP error

Explanation    Fabricq ASIC encountered a MI Unicast/Multicast Missing EOP error

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-MI_UNEXP_EOP fabricq: Minor error in Fabricq ASIC [dec]. MI [chars] Unexpected EOP error

Explanation    Fabricq ASIC encountered a MI Unicast/Multicast Unexpected EOP error

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-MI_WEDGE fabricq: Major error in Fabricq ASIC [dec]. MI [chars] Wedged

Explanation    Fabricq ASIC encountered a MI Unicast/Multicast Wedge error

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-MINOR fabricq: Minor error: [chars], [dec]

Explanation    fabricq, Minor alarm

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-NOT_YET_IMPLEMENTED fabricq: this function is not yet implemented

Explanation    fabricq, a function was not implemented.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-OQM_ADDRESS_ERROR fabricq: Major error in [chars], Hardware detected an address error on Fabricq ASIC [dec]. [hex] spo_oqm_mem_oqmda [hex], [hex] spo_oqm_reg_ecc_addr [hex], [hex] spo_oqm_reg_ecc_data [hex].

Explanation    Fabricq ASIC encountered a memory address error

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-OQM_CORRECTABLE_ERROR fabricq: Major error in [chars], Hardware detected many single bit errors on Fabricq ASIC [dec]. Details of last error: [hex] spo_oqm_reg_ecc_addr [hex], [hex] spo_oqm_reg_ecc_data [hex].

Explanation    Fabricq ASIC encountered a correctable memory error

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-OQM_OOR fabricq: Major error in Fabricq ASIC [dec]. OQM [chars] OOR error.

Explanation    Fabricq ASIC encountered a OQM OOR error

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-OQM_PARITY_ERROR fabricq: Major error: [chars], Hardware detected a parity error on fabricq asic [dec]

Explanation    Fabricq Asic encountered a parity error

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-OQM_QUEUE_CONF SPO: An error occured while trying to program queues for port [unsigned int]

Explanation    An error occured while the fabricq driver was trying to create queues for an interface. This may leave one or more interfaces out of operation.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-OQM_UNCORRECTABLE_RESET_ERROR fabricq: Major error in [chars], Hardware detected a multibit error on Fabricq ASIC [dec]. [hex] spo_oqm_mem_oqmda [hex], [hex] spo_oqm_reg_ecc_addr [hex], [hex] spo_oqm_reg_ecc_data [hex].

Explanation    Fabricq ASIC encountered a uncorrectable memory error

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-PARITY_ERROR fabricq: Major error: [chars], Hardware detected a parity error on fabricq asic [dec]

Explanation    Fabricq Asic encountered a parity error

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-PCL_CCNT_ERR fabricq: Major error in PCL of fabricq asic [dec]: [chars] data.

Explanation    Sponge encountered a PCL cell count mistmatch error

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-PCL_CSLOT_SYNC fabricq: Major internal error in PCL of fabricq asic [dec]: [chars].

Explanation    Sponge encountered a PCL internal error

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-PCL_FCH_DISCARD fabricq: Major error in PCL of fabricq asic [dec]: [chars].

Explanation    Sponge encountered a PCL FCH discard error

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-PCL_HALF_DEPTH_PART SPO: Half depth PCL LUT memory detected. Device: [unsigned int], Bank: [unsigned int].

Explanation    The fabricq driver has detected that the PCL LUT memory block is only half the size it should be. The board should be upgraded to the full memory configuration.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-PCL_LUT_PARITY_ERROR fabricq: Major error: [chars], Hardware detected a parity error on fabricq asic [dec]

Explanation    Fabricq Asic encountered a parity error

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-PCL_PARITY_ERROR fabricq: Major error: [chars], Hardware detected a parity error on fabricq asic [dec]

Explanation    Fabricq Asic encountered a parity error

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-PCL_PKT fabricq: Minor error in PCL of fabricq asic [dec]. [chars]

Explanation    Sponge encountered a PCL Packet error

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-PCL_XCELL_ERR fabricq: Major error in PCL of fabricq asic [dec]: [chars]

Explanation    Sponge encountered a PCL extra cell error

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-PMI_OOR fabricq: Minor error in Fabricq ASIC [dec]. PMI [chars] OOR error.

Explanation    Fabricq ASIC encountered a PMI OOR error

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-PMI_QC_OOR fabricq: Major error in Fabricq ASIC [dec]. PMI [chars] OOR error.

Explanation    Fabricq ASIC encountered a PMI OOR error

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-PSM_ADDRESS_ERROR fabricq: Major error in PCL PSM, Hardware detected an address error on fabricq asic [dec]. [hex] spo_pcl_reg_psm_ea_ee [hex], [hex] spo_pcl_reg_psm_ed_msb [hex], [hex] spo_pcl_reg_psm_ed_lsb [hex].

Explanation    Fabricq Asic encountered a memory address error

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-PSM_CORRECTABLE_ERROR fabricq: Major error in PCL PSM, Hardware detected many single bit errors on fabricq asic [dec]. Details of last error: [hex] spo_pcl_reg_psm_ea_ee [hex], [hex] spo_pcl_reg_psm_ed_msb [hex], [hex] spo_pcl_reg_psm_ed_lsb [hex].

Explanation    Fabricq Asic encountered a large number of correctable memory errors

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-PSM_FPOOL_LWATER fabricq: Minor error in PCL of fabricq asic [dec]. Hardware running on low resources

Explanation    Sponge encountered a PCL PSM Freel Pool Low water error

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-PSM_FREE_POOL_OFLOW fabricq: Major error in PCL of fabricq asic [dec].

Explanation    Fabricq Asic encountered a PCL PSM Free Pool Overflow error

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-PSM_OOR fabricq: Major error in PCL of fabricq asic [dec]. [hex] spo_pcl_reg_pfpo [hex]

Explanation    Sponge encountered a PCL PSM Out of resource error

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-PSM_UNCORRECTABLE_ERROR fabricq: Major error in PCL PSM, Hardware detected a multibit error on fabricq asic [dec]. spo_pcl_mem_pp_pr_[unsigned int] [hex] [hex], spo_pcl_reg_psm_ea_ee [hex] [hex], spo_pcl_reg_psm_ed_msb [hex] [hex], spo_pcl_reg_psm_ed_lsb [hex] [hex].

Explanation    Fabricq Asic encountered a uncorrectable memory error

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-PSN_WRAP fabricq: Major error in PCL of fabricq asic [dec]: [chars] . [hex] spo_pcl_mem_ppbr [hex][hex]%08x[hex]%08x[hex]%08x[hex]

Explanation    Sponge encountered a PCL Packet Sequence Wrap error

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-SPI_BM fabricq: Minor error:Fabricq ASIC [dec] has SPI Barrier [chars] error

Explanation    Fabricq ASIC encountered a SPI Barrier error

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-SPI_BM_IDLE fabricq: Major error:Fabricq ASIC [dec] has Idle Aggregated Phase for Barriers.

Explanation    Fabricq ASIC encountered a SPI Barrier Idle Aggregated phase error

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-SPI_DHE fabricq: Minor error:Fabricq ASIC [dec] has SPI DHE [chars] error

Explanation    Fabricq ASIC encountered a SPI Discard Hiccup error

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-SPI_DIS_OFLOW fabricq: Major error:Fabricq ASIC [dec] has SPI discard overflow error. Changing interval

Explanation    Fabricq ASIC encountered a SPI Fabric Backpressure error

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-SPI_PARITY fabricq: Minor error:Fabricq Asic [dec] has SPI [chars] Parity error

Explanation    Fabricq ASIC encountered a SPI Fabric Backpressure error

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-SQI_MISSING_EOP fabricq: Minor error in Fabricq ASIC [dec]. SQI [chars] Missing EOP error

Explanation    Fabricq ASIC encountered a SQI Missing EOP error

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-SQI_SN8 fabricq: Major error in Fabricq ASIC [dec]. Squinet [chars] error

Explanation    Fabricq ASIC encountered a Squinet CRC/Sync error

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-SQI_TRG fabricq: Major error in Fabricq ASIC [dec]. Squinet [chars] error

Explanation    Fabricq ASIC encountered a trigger Condition

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-SQI_UNEXP_EOP fabricq: Minor error in Fabricq ASIC [dec]. SQI [chars] Unexpected EOP error

Explanation    Fabricq ASIC encountered a SQI Unexpected EOP error

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-SQI_WEDGE fabricq: Major error in Fabricq ASIC [dec]. SQI Wedged

Explanation    Fabricq ASIC encountered a SQI Wedge error

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-TRACE_INIT [chars]: Ltrace init for file [chars] failed: [chars]

Explanation    The fabricq driver tracing functionality could not be initialized. The component is still fully functional, but affects only debugging capabilities in case of any problems.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-UNCORRECTABLE_ERROR fabricq: Major error in [chars], Hardware detected a multibit error on fabricq asic [dec]

Explanation    Fabricq Asic encountered a memory uncorrectable error

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-3-URG_CTX fabricq: Major error in PCL of fabricq asic [dec]. Urgent Context exceeded 5 = [hex]

Explanation    Sponge encountered a PCL Urgent Context error

Recommended Action    *SUPPORT*

Error Message     
 
    
    
   

%FABRIC-FABRICQ-6-SPI_FBP fabricq: Major error:Cluster: [dec] in Fabricq ASIC [dec] has SPI FBP [chars] error

Explanation    The fabricq asic encounted a fabric backpressure error. These sort of errors are to be expected during bootup or during OIR events, and are harmless for the vast majority of the time. The only time they would signify a serious error is if they recur for long periods.

Recommended Action    If these messages are recurring and/or you're seeing other faults (such as traffic loss) then contact your support agent.

FDI Messages

Error Message     
 
    
    
   

%FABRIC-FDI-3-BAD_MSG_ERROR [chars]: [chars] [dec]

Explanation    Report.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%FABRIC-FDI-3-BUFF_Q_ERROR [chars]: No Space to buffer msg. Conn_id [dec]. Data_Size [dec]. Buffer_states ([dec] [dec])

Explanation    Report.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%FABRIC-FDI-3-COMM_GSP_GROUP_CREATE_ERROR [chars]: GSP group [chars] creation/join was failed; [chars].

Explanation    Internal error

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%FABRIC-FDI-3-CONN_ERROR [chars]: [chars]. Conn_id [dec] Conn_name [chars]

Explanation    Report.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%FABRIC-FDI-3-ERROR [chars]: [chars]. Error: [dec] [chars]

Explanation    Report.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%FABRIC-FDI-3-EVM_ATTACH [chars]: FDI API failed to attach to evm with rc [hex]

Explanation    The FDI API failed to attach with Event Manager

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FDI-3-FATAL_ERROR [chars]: [chars]. [dec] Error: [chars]

Explanation    Report.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%FABRIC-FDI-3-GSP_SEND_FAILED [chars]: gsp_send on conn [dec] seqnum [dec] failed with [dec]

Explanation    Report.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%FABRIC-FDI-3-INTERNAL_ERR [chars]: Internal error: [chars]; [chars]

Explanation    FDI API has either failed a function that expected to succeed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FDI-3-NOMEM_ERR [chars]: Function [chars] was unable to allocate [dec] bytes

Explanation    The FDI API failed to allocate memory

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FDI-6-COMM_GSP_LOOKUP_LWG_ERROR [chars]: GSP lightweight group [chars] lookup was failed; [chars].

Explanation    Informational message that a GSP lightweight group was gone

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%FABRIC-FDI-6-COMM_GSP_UNKNOWN_MSG_TYPE [chars]: Unknown GSP message type: [dec].

Explanation    Informational message that an unknown GSP message is received

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%FABRIC-FDI-7-DEBUG_CLEANUP_FAILED [chars]: Debug cleanup for fabric fdi library failed: [chars]

Explanation    An error was returned when the fabric fdi library called the debug_register() function.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FDI-7-DEBUG_INIT_EVENT_FAILED [chars]: Debug initialization for the fdi/[chars] event failed: [chars]

Explanation    An error was returned when the fabric fdi library called the debug_init_event() function.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FDI-7-DEBUG_REGISTER_FAILED [chars]: Debug registration for fabric fdi library failed: [chars]

Explanation    An error was returned when the fabric fdi library called the debug_register() function.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FDI-7-MSG_QUEUE_LIMIT_EXCEEDED [chars]: Internal FDI queue limit reached. Unable to send to clientid [dec]

Explanation    Debug log msg to flag that FDI is unable to send msgs to clients

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%FABRIC-FDI-7-MSG_RETRY_COUNT_EXCEEDED [chars]: Msg to client [dec] retry count exceeded limit

Explanation    Debug log msg to flag that FDI is unable to send msgs to clients

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%FABRIC-FDI-7-MSG_RETRY_FAILED [chars]: Msg to client [dec] retry send failed

Explanation    Debug log msg to flag that FDI is unable to send msgs to clients

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%FABRIC-FDI-7-MSG_STALE_DATA_FOUND [chars]: stale msg found update with new data for client [dec]

Explanation    Debug log msg found stale data

Recommended Action    'No action is required.'

FGID_AGG Messages

Error Message     
 
    
    
   

%FABRIC-FGID_AGG-3-DEBUG_ERR [chars]: FGID Aggregator unable to register for dbg rc [hex]

Explanation    The FGID-DB aggregator unable to register for debugging

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FGID_AGG-3-EVM_ATTACH [chars]: FGID Aggregator unable to attach to evm with rc [hex]

Explanation    The FGID-DB aggregator unable to attach with Event Manager

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FGID_AGG-3-EVM_ERR [chars]: FGID Aggregator unable to create [chars] evm with rc [hex]

Explanation    The FGID-DB aggregator unable to create Event Manager

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FGID_AGG-3-GSP_ERR [chars]:FGID Aggregator unable to create/join group with rc [hex]

Explanation    The FGID-DB aggregator unable to create/join GSP group

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FGID_AGG-3-INTERNAL_ERR [chars]: Internal error: [chars]; [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FGID_AGG-3-LTRACE_INIT [chars]: Ltrace init for file [chars] failed: [chars]

Explanation    Could not open ltrace buffer

Recommended Action    No action is required.

Error Message     
 
    
    
   

%FABRIC-FGID_AGG-3-MEM_ERR [chars]: FGID Aggregator unable to allocate [dec] bytes

Explanation    The FGID-DB aggregator unable to allocate memory

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FGID_AGG-3-UNKNOWN [chars]: FGID Aggregator fails due to an unknown error

Explanation    The FGID-DB aggregator fails due to an unknown error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

FGID_ALLOC Messages

Error Message     
 
    
    
   

%FABRIC-FGID_ALLOC-3-BAG_REG_FAILED [chars]:FGID allocator unable to register FGID bags; [chars]

Explanation    The FGID-DB allocator unable to register FGID bags

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FGID_ALLOC-3-DEBUG_ERR [chars]: FGID Allocator unable to register for dbg rc [hex]

Explanation    The FGID-DB allocator unable to register for debugging

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FGID_ALLOC-3-EVM_ATTACH [chars]: FGID Allocator unable to attach to evm with rc [hex]

Explanation    The FGID-DB allocator unable to attach with Event Manager

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FGID_ALLOC-3-EVM_ERR [chars]: FGID Allocator unable to create [chars] evm with rc [hex]

Explanation    The FGID-DB allocator unable to create Event Manager

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FGID_ALLOC-3-GSP_ERR [chars]:FGID Allocator unable to create/join group [chars] with rc [hex]

Explanation    The FGID-DB allocator unable to create/join GSP group

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FGID_ALLOC-3-INTERNAL_ERR [chars]: Internal error: [chars]; [chars]

Explanation    An FGID Allocator internal software error occurred.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FGID_ALLOC-3-LTRACE_INIT [chars]: Ltrace init for file [chars] failed: [chars]

Explanation    Could not open ltrace buffer

Recommended Action    No action is required.

Error Message     
 
    
    
   

%FABRIC-FGID_ALLOC-3-MEM_ERR [chars]: FGID Allocator unable to allocate [dec] bytes

Explanation    The FGID-DB allocator unable to allocate memory

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FGID_ALLOC-3-SYSDB_BIND_FAILED [chars]:FGID Allocator unable to bind to Sysdb name space [chars]; [chars]

Explanation    The FGID-DB allocator unable to bind to sysdb.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FGID_ALLOC-3-SYSDB_EDM_REG_FAILED [chars]:FGID allocator unable to perform EDM registration; [chars]

Explanation    The FGID-DB allocator unable to register EDM handlers

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FGID_ALLOC-3-SYSMGR_PROC_AVAIL_FAILED [chars]: sysmgr_proc_available failed: [chars]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FGID_ALLOC-3-SYSMGR_PROC_READY_FAILED [chars]: sysmgr_proc_ready failed: [chars]

Explanation    Internal error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FGID_ALLOC-3-UNKNOWN [chars]: FGID Allocator fails due to an unknown error

Explanation    The FGID-DB allocator fails due to an unknown error

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

FGID_BCDL_CONSUMER Messages

Error Message     
 
    
    
   

%FABRIC-FGID_BCDL_CONSUMER-3-BOARD_ERR [chars]: failed to get hardware board type: rc = [dec]; [chars]

Explanation    An error occurred during accessing hardware board type.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FGID_BCDL_CONSUMER-3-DEBUG_INIT_ERR [chars]: failed to initialize debug; rc = [hex]; [chars]

Explanation    An error occurred during debugging initializatione.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FGID_BCDL_CONSUMER-3-EVM_ERR [chars]: FGID BCDL consumer unable to create evm; errno = [dec], [chars]

Explanation    The FGID-DB BCDL consumer unable to create Event Manager

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FGID_BCDL_CONSUMER-3-GET_RACK_ERR [chars]: failed to get rack value; rc = [hex]; [chars]

Explanation    An error occurred during retrieving rack value from nodeid.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FGID_BCDL_CONSUMER-3-INTERNAL_ERR [chars]: Internal error: [chars]; [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FGID_BCDL_CONSUMER-3-LTRACE_INIT [chars]: Ltrace init for file [chars] failed: [chars]

Explanation    Could not open ltrace buffer

Recommended Action    No action is required.

Error Message     
 
    
    
   

%FABRIC-FGID_BCDL_CONSUMER-3-MEM_ERR [chars]: FGID Server unable to allocate [dec] bytes

Explanation    The FGID BCDL consumer unable to allocate memory

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FGID_BCDL_CONSUMER-3-NOTI_FGID_DOWNLOAD_DONE_ERR [chars]: Unable to notify SEA driver about FGID download complete; rc = [hex]; [chars]

Explanation    An error occurred during notifying the FGID downlaod completion.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FGID_BCDL_CONSUMER-3-SET_FGID_ERR [chars]: failed to set FGID [chars] bitmap; rc = [hex]; [chars]

Explanation    An error occurred during setting S2 or S3 bitmap.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FGID_BCDL_CONSUMER-3-USAGE [chars]: Invalid argument. USAGE: [chars]

Explanation    The server process was invoked with an unknown argument.

Recommended Action    *SUPPORT*

FGID_BITMASK Messages

Error Message     
 
    
    
   

%FABRIC-FGID_BITMASK-3-DEBUG_ERR [chars]: FGID Bitmask slot[dec] unable to register for dbg rc [hex]

Explanation    The FGID-DB aggregator unable to register for debugging

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FGID_BITMASK-3-EVM_ATTACH [chars]: FGID Bitmask Proc [dec] unable to attach to evm rc [hex]

Explanation    The FGID-DB Bitmask process unable to attach to Event Manager

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FGID_BITMASK-3-EVM_ERR [chars]: FGID Bitmask Process [dec] unable to create evm rc [hex]

Explanation    The FGID-DB Bitmask process unable to create Event Manager

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

FGID_LIB Messages

Error Message     
 
    
    
   

%FABRIC-FGID_LIB-3-API_ERR [chars]: FGID-DB API failed with rc [hex]

Explanation    The FGID-DB API failed

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FGID_LIB-3-CONN_ERROR [chars]: FGID client library detects connect error

Explanation    The FGID library detect LWM connection error.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FGID_LIB-3-DEBUG_SETUP [chars]: Problem in setting up debug because:[chars].

Explanation    The fgid library was unable to setup debug information.

Recommended Action    The fgid library should still be functional. However, support should be contacted to determine the underlying cause of the failure.

Error Message     
 
    
    
   

%FABRIC-FGID_LIB-3-EVM_ATTACH [chars]: FGID library on [dec] unable to attach to evm with rc [hex]

Explanation    The FGID library unable to attach with Event Manager

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FGID_LIB-3-GET_CLIENTLIST_FAILED [chars]: Problem in getting FGID clients list. rc=[chars]

Explanation    An attempt to get the current clientlist failed for the above reason.

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%FABRIC-FGID_LIB-3-INTERNAL [chars]: Function [chars] failed with rc [chars]

Explanation    FGID library has either failed a function that expected to succeed, or has got into an inconsistent state.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FGID_LIB-3-LTRACE_FAIL [chars]: Problem in setting up ltrace because:[chars].

Explanation    An attempt to setup the ltrace system failed.

Recommended Action    *RECUR*

Error Message     
 
    
    
   

%FABRIC-FGID_LIB-3-MEM_ERR [chars]: Function [chars] was unable to allocate [dec] bytes

Explanation    The FGID-DB API unable to allocate memory

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

FGID_SVR Messages

Error Message     
 
    
    
   

%FABRIC-FGID_SVR-2-USAGE [chars]: Server Id requested [chars] is not a allowed server_id

Explanation    Incorrect command line parameters were passed to the FGID-DB server, and so it failed to start.

Recommended Action    Check the startup arguments passed to FGID-DB. A default configuration will be used if no parameters are passed. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FGID_SVR-3-BCDL_AGENT_START_ERR [chars]:FGID Server can't start BCDL Agent; rc = [hex]

Explanation    The FGID server unable to start BCDL agent

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FGID_SVR-3-BCDL_INIT_BUF_ERR [chars]:FGID Server can't initialize BCDL buffer; rc = [hex]

Explanation    The FGID server unable to initialize BCDL buffer

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FGID_SVR-3-EVM_ERR [chars]: FGID Server [chars] unable to create evm with rc [hex]

Explanation    The FGID-DB server unable to create Event Manager

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FGID_SVR-3-GSP_ERR [chars]:FGID Server encountered GSP communication error rc [hex]

Explanation    The FGID-DB server unable to create/join GSP group

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FGID_SVR-3-GSP_GRP_CREATE_ERR [chars]:FGID Server encountered GSP group [chars] create error; rc = [hex]

Explanation    The FGID server unable to create/join GSP group

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FGID_SVR-3-GSP_GRP_NOTI_ERR [chars]:FGID Server encountered group set notify error; gid = [dec], rc = [hex]

Explanation    The FGID server unable to set notification of GSP group

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FGID_SVR-3-INTERNAL_ERR [chars]: Internal error: [chars]; [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FGID_SVR-3-LTRACE_INIT [chars]: Ltrace init for file [chars] failed: [chars]

Explanation    Could not open ltrace buffer

Recommended Action    No action is required.

Error Message     
 
    
    
   

%FABRIC-FGID_SVR-3-MEM_ERR [chars]: FGID Server unable to allocate [dec] bytes

Explanation    The FGID-DB server unable to allocate memory

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

FSDB Messages

Error Message     
 
    
    
   

%FABRIC-FSDB-1-PLANE_CONFIG_ERR Detected fabric card topology conflicts with configured values for rack/slot: [dec]/[dec]. (Config: [dec], Detected: [dec])

Explanation    The detected plane configuration for this multi-chassis system differs from the detected topology. This error will cause one or more fabric planes to stay down which will effect the bringup of the rest of the system. Possible causes could be incorrect admin plane configuration (ie the configuration states that slot 1 is the first card in a plane whereas slot 0 really is) or an incorrectly sized fiber module is inserted in a slot.

Recommended Action    Check the admin plane configuration to ensure that it corresponds with the actual physical topology of the system. If this configuration looks correct then contact support, otherwise correct the configuration and the system should recover.

Error Message     
 
    
    
   

%FABRIC-FSDB-1-PLANE_UPDOWN Plane [dec] state changed to [chars]: [chars]

Explanation    The plane is down which means that the sprayer cannot reach *any* destination on the plane. This a symptom of too many other fabric errors (DESTINATION_UPDOWN) than an error itself.

Recommended Action    None.

Error Message     
 
    
    
   

%FABRIC-FSDB-1-SYSDB_ERR [chars] : [chars]

Explanation    Error in sysdb operation.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%FABRIC-FSDB-2-CONTROL_MSG_ERROR Rack [dec] sent illegal fabric control message - [chars]

Explanation    Fabric control software running in another rack has notified a status change that is impossible or illegal.

Recommended Action    This error can be caused by an attempt to use the router with in a fabric configuration that is not supported. For example, there may be three or more linecard racks that have dual-rack fabric cards installed. Ensure that the correct racks are installed in the router and that software displays the correct rack numbers and rack types for each rack. Ensure that the software fabric configuration is correct. If these steps do not find an error, restart fabric control software on the rack that produced this message, and on the rack sending the illegal message.

Error Message     
 
    
    
   

%FABRIC-FSDB-2-DESTINATION_UPDOWN Destination [dec] availability for source group [dec] from plane [dec] changed to [chars]

Explanation    No path can be found from the sprayer to the sponge.

Recommended Action    None

Error Message     
 
    
    
   

%FABRIC-FSDB-2-FATAL_ERR [chars] : [chars]

Explanation    A critical function failed that expected to succeed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FSDB-2-INTERNAL_ERR [chars] : [chars]

Explanation    A critical function failed that expected to succeed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FSDB-2-NOMEM Failed to allocate [dec] bytes due to memory shortage

Explanation    Memory on the router is critically low.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%FABRIC-FSDB-2-PARSE_ERROR Parse error in fabric definition file [chars], line [dec]

Explanation    A file describing switch fabric components has errors. Some fabric components cannot be brought into service.

Recommended Action    A failed or incomplete software upgrade could cause this error. It could also be caused by corruption of an existing definition file. Ensure that the definition file is not damaged. If the problem persists, re-install the fabric control software.

Error Message     
 
    
    
   

%FABRIC-FSDB-3-A_EVM_ERR [chars]: [chars], [chars]

Explanation    A failure to create event manager in FSDB Auxillary server was detected

Recommended Action    No action is necessary unless the message recurs

Error Message     
 
    
    
   

%FABRIC-FSDB-3-UNKNOWN_FAB_DEF Cannot find fabric definition file [chars]

Explanation    A file describing switch fabric components is not present on the router.

Recommended Action    If the hardware installed in the router has changed, ensure that fabric control software has been upgraded to the correct version. If the correct software has been installed, report the problem to technical support.

Error Message     
 
    
    
   

%FABRIC-FSDB-4-INTERNAL_WARN [chars] : [chars]

Explanation    A function failed unexpectedly. It is possible to continue operation, although there may be some non-critical errors noticeable.

Recommended Action    No action is necessary unless the message recurs or other components are generating similar errors. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FSDB-7-MISC_INFO [chars]

Explanation    Miscellaneous information about FSDB state.

Recommended Action    None.

FSDBLIB Messages

Error Message     
 
    
    
   

%FABRIC-FSDBLIB-2-FAIL [chars]: [chars] errno [[hex]] [[chars]]

Explanation    There was a critical failure.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message     
 
    
    
   

%FABRIC-FSDBLIB-2-INFRA_FAIL [chars]: Error detected: [chars]; [chars]

Explanation    Software was unable to access system configuration data that should be available to all processes.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FSDBLIB-3-COMM_FAIL [chars]: IPC error: [chars]; [chars]

Explanation    Software could not contact the FSDB server. This could be a temporary condition caused by a delay in server startup. However, if the problem persists it indicates a software fault.

Recommended Action    No action is required unless the message recurs. In this case, first fix any problems with the FSDB server. Use the show process command to confirm that the FSDB server is running, and check for any messages that indicate a problem from the server. Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FSDBLIB-3-NOMEM_ERR [chars]: Could not allocate memory for [chars].

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FSDBLIB-4-INFRA_WARN [chars]: Warning: [chars]; [chars]

Explanation    Software encountered an error when attempting to access or modify system configuration data. However, only cosmetic effects on system behavior are expected.

Recommended Action    No action is required.

FSTATSA Messages

Error Message     
 
    
    
   

%FABRIC-FSTATSA-2-FAIL [chars]: [chars] errno [[hex]] [[chars]]

Explanation    Threre was a critical failure.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message     
 
    
    
   

%FABRIC-FSTATSA-3-COMM_GSP_GROUP_CREATE_ERROR [chars]: GSP group [chars] creation/join was failed; [chars]; rc = [dec].

Explanation    Internal error

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%FABRIC-FSTATSA-3-COMM_GSP_LOOKUP_LWG_ERROR [chars]: GSP lightweight group [chars] lookup was failed; [chars].

Explanation    Internal error

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%FABRIC-FSTATSA-3-EVENT_CONN_CREATE_FAILED [chars]: could not create connection structure for the connection to [chars]: [chars]

Explanation    Internal error

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%FABRIC-FSTATSA-3-EVENT_CONN_NOTIFY_FAILED [chars]: could not set notify handler for connection opens and errors to [chars] : [chars]

Explanation    Internal error

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%FABRIC-FSTATSA-3-EVENT_CONN_OPEN_FAILED [chars]: could not open connection to [chars] : [chars]

Explanation    Internal error

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%FABRIC-FSTATSA-3-INTERNAL_ERR [chars]: Internal error: [chars]; [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FSTATSA-3-NOMEM_ERR [chars]: Could not allocate memory for [chars].

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FSTATSA-3-SYSMGR_PROC_READY_FAILED [chars]: sysmgr_proc_ready failed: [chars]

Explanation    Internal error

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%FABRIC-FSTATSA-6-COMM_GSP_UNKNOWN_MSG_TYPE [chars]: Unknown GSP message type: [dec].

Explanation    Informational message that an unknown GSP message is received

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%FABRIC-FSTATSA-6-SERVER_EXITING hfr_fstats_server exiting. This should never happen

Explanation    Informational message that hfr_fstats_server process is exiting.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%FABRIC-FSTATSA-6-SYSDB_EDM_REG_DONE [chars]: sysdb EDM register is done.

Explanation    Informational message that IMDS sysdb EDM is done.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%FABRIC-FSTATSA-7-BAG_REG_FAILED [chars]: bag register error is detected; [chars].

Explanation    Internal error

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%FABRIC-FSTATSA-7-DEBUG_INIT_EVENT_FAILED [chars]: Debug initialization for the fstats/aggr/[chars] event failed: [chars]

Explanation    An error was returned when the fabric statistics aggregator called the debug_init_event() function.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FSTATSA-7-DEBUG_REGISTER_FAILED [chars]: Debug registration for fabric statistics aggregator failed: [chars]

Explanation    An error was returned when the fabric statistics aggregator called the debug_register() function.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FSTATSA-7-EVM_CREATE_FAILED [chars]: event_manager_create failed; [chars]

Explanation    The event_manager_create function reported an error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FSTATSA-7-SYSDB_BIND_FAILED [chars]: Can't bind to SysDB at [chars]: [chars]

Explanation    The sysdb_bind function reported an error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FSTATSA-7-SYSDB_CONN_ERROR [chars]: sysdb connection error is detected.

Explanation    Internal error

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%FABRIC-FSTATSA-7-SYSDB_EDM_REGISTER_FAILED [chars]: Can't register EDM to SysDB at [chars]: [chars]

Explanation    The sysdb_register_edm function reported an error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FSTATSA-7-SYSDB_UNBIND_FAILED [chars]: Can't unbind from SysDB at [chars]: [chars]

Explanation    The sysdb_unbind function reported an error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

FSTATSC Messages

Error Message     
 
    
    
   

%FABRIC-FSTATSC-3-COMM_GSP_GROUP_CREATE_ERROR [chars]: GSP group [chars] creation/join was failed; [chars].

Explanation    Internal error

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%FABRIC-FSTATSC-3-EVM_ATTACH [chars]: FSTATS client API is failed to attach to evm with rc [hex]

Explanation    The FSTATS client API is failed to attach with Event Manager

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FSTATSC-3-INTERNAL_ERR [chars]: Internal error: [chars]; [chars]

Explanation    FSTATS client API has either failed a function that expected to succeed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FSTATSC-3-NOMEM_ERR [chars]: Function [chars] was unable to allocate [dec] bytes

Explanation    The FSTATS client API is failed to allocate memory

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FSTATSC-7-COMM_GSP_LOOKUP_LWG_ERROR [chars]: GSP lightweight group [chars] lookup was failed; [chars].

Explanation    Informational message that a GSP lightweight group was gone

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%FABRIC-FSTATSC-7-COMM_GSP_UNKNOWN_MSG_TYPE [chars]: Unknown GSP message type: [dec].

Explanation    Informational message that an unknown GSP message is received

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%FABRIC-FSTATSC-7-DEBUG_CLEANUP_FAILED [chars]: Debug cleanup for fabric statistics client library failed: [chars]

Explanation    An error was returned when the fabric client library called the debug_register() function.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FSTATSC-7-DEBUG_INIT_EVENT_FAILED [chars]: Debug initialization for the fstats/client/[chars] event failed: [chars]

Explanation    An error was returned when the fabric client library called the debug_init_event() function.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FSTATSC-7-DEBUG_REGISTER_FAILED [chars]: Debug registration for fabric statistics client library failed: [chars]

Explanation    An error was returned when the fabric client library called the debug_register() function.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

FSTATSS Messages

Error Message     
 
    
    
   

%FABRIC-FSTATSS-2-FAIL [chars]: [chars] errno [[hex]] [[chars]]

Explanation    Threre was a critical failure.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message     
 
    
    
   

%FABRIC-FSTATSS-3-COMM_GSP_GROUP_CREATE_ERROR [chars]: GSP group [chars] creation/join was failed; [chars]; rc = [dec].

Explanation    Internal error

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%FABRIC-FSTATSS-3-COMM_GSP_LOOKUP_LWG_ERROR [chars]: GSP lightweight group [chars] lookup was failed; [chars].

Explanation    Internal error

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%FABRIC-FSTATSS-3-EVENT_CONN_CREATE_FAILED [chars]: could not create connection structure for the connection to [chars]: [chars]

Explanation    Internal error

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%FABRIC-FSTATSS-3-EVENT_CONN_NOTIFY_FAILED [chars]: could not set notify handler for connection opens and errors to [chars] : [chars]

Explanation    Internal error

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%FABRIC-FSTATSS-3-EVENT_CONN_OPEN_FAILED [chars]: could not open connection to [chars] : [chars]

Explanation    Internal error

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%FABRIC-FSTATSS-3-INTERNAL_ERR [chars]: Internal error: [chars]; [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FSTATSS-3-NOMEM_ERR [chars]: Could not allocate memory for [chars].

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FSTATSS-3-RSC_REG_INCONSISTENT_VALUE_ERR [chars]: fabric resource registration error due to inconsistent value.

Explanation    Internal error

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%FABRIC-FSTATSS-3-SYSMGR_PROC_READY_FAILED [chars]: sysmgr_proc_ready failed: [chars]

Explanation    Internal error

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%FABRIC-FSTATSS-6-COMM_GSP_UNKNOWN_MSG_TYPE [chars]: Unknown GSP message type: [dec].

Explanation    Informational message that an unknown GSP message is received

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%FABRIC-FSTATSS-6-SERVER_EXITING hfr_fstats_server exiting. This should never happen

Explanation    Informational message that hfr_fstats_server process is exiting.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%FABRIC-FSTATSS-6-SYSDB_CONN_CLOSED [chars]: sysdb connection was closed.

Explanation    Informational message that sysdb connection was closed.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%FABRIC-FSTATSS-6-SYSDB_CONN_OPENED [chars]: sysdb connection was opened.

Explanation    Informational message that sysdb connection was opened.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%FABRIC-FSTATSS-6-SYSDB_EDM_REG_DONE [chars]: sysdb EDM register is done.

Explanation    Informational message that IMDS sysdb EDM is done.

Recommended Action    'No action is required.'

Error Message     
 
    
    
   

%FABRIC-FSTATSS-7-BAG_REG_FAILED [chars]: bag register error is detected; [chars].

Explanation    Internal error

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%FABRIC-FSTATSS-7-DEBUG_INIT_EVENT_FAILED [chars]: Debug initialization for the fstats/server/[chars] event failed: [chars]

Explanation    An error was returned when the fabric statistics server called the debug_init_event() function.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FSTATSS-7-DEBUG_REGISTER_FAILED [chars]: Debug registration for fabric statistics server failed: [chars]

Explanation    An error was returned when the fabric statistics server called the debug_register() function.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FSTATSS-7-EVM_CREATE_FAILED [chars]: event_manager_create failed; [chars]

Explanation    The event_manager_create function reported an error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FSTATSS-7-SYSDB_BIND_FAILED [chars]: Can't bind to SysDB at [chars]: [chars]

Explanation    The sysdb_bind function reported an error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FSTATSS-7-SYSDB_CONN_ERROR [chars]: sysdb connection error is detected.

Explanation    Internal error

Recommended Action    'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'

Error Message     
 
    
    
   

%FABRIC-FSTATSS-7-SYSDB_EDM_REGISTER_FAILED [chars]: Can't register EDM to SysDB at [chars]: [chars]

Explanation    The sysdb_register_edm function reported an error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%FABRIC-FSTATSS-7-SYSDB_UNBIND_FAILED [chars]: Can't unbind from SysDB at [chars]: [chars]

Explanation    The sysdb_unbind function reported an error.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.