Cisco IOS XR System Error Message Reference Guide, Release 3.2
Access Control List (ACL) Error Messages for Cisco IOS XR
Downloads: This chapterpdf (PDF - 183.0KB) The complete bookPDF (PDF - 10.75MB) | Feedback

Access Control List (ACL) Messages

Table Of Contents

Access Control List (ACL) Messages

IP_ACL_PARSE Messages

IPV4_ACL_DP Messages

IPV4_ACL_LTRACE Messages

IPV4_ACL_MGR Messages

IPV4_ACL Messages

IPV6_ACL_DAEMON Messages

IPV6_ACL Messages


Access Control List (ACL) Messages


This section contains all ACL related System Error Messages. The following facility codes are represented in this module:

IP_ACL_PARSE Messages

IPV4_ACL_DP Messages

IPV4_ACL_LTRACE Messages

IPV4_ACL_MGR Messages

IPV4_ACL Messages

IPV6_ACL_DAEMON Messages

IPV6_ACL Messages

IP_ACL_PARSE Messages

Error Message     
 
    
    
   

%ACL-IP_ACL_PARSE-2-ALLOC Unable to allocate memory for [chars]

Explanation    Memory allocation failed, probably due to memory depletion. An entry could not be added to the cache, the associated command will be blocked by the parser.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message     
 
    
    
   

%ACL-IP_ACL_PARSE-3-CLIENT Could not get client id for config session. Cache [chars] operation aborted

Explanation    The config session id could not be determined, so the cache operation had to be aborted. If the operation was a clear then the cache now contains invalid data, if it was a set then the operation just needs to be repeated.

Recommended Action    Restart the parser server. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ACL-IP_ACL_PARSE-3-DEBUG Could not register for debugging. Error: [chars]

Explanation    The debugging registration could not be made, so no solicited debug will be available until a successful registration is made. Other functionality is unaffected.

Recommended Action    None. The remainder of the code is working fine. The code will continue to attempt to register for debugging when each ACL or ACE is configured (until it is successful) so the problem should be easily remedied. Restarting the parser server will fix the problem if it persists. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ACL-IP_ACL_PARSE-3-LIST Unable to prepare list of ACLs to be cleared from the cache. Cache may now be invalid

Explanation    The list of ACLs could not be constructed, possibly due to memory constraints, so the ACLs are left in the cache and will not be configurable from another config session.

Recommended Action    Restart the parser server. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. *RECUR*

Error Message     
 
    
    
   

%ACL-IP_ACL_PARSE-3-MUTEX Unable to lock cache mutex. Error: [chars]

Explanation    A mutex is used to protect the ACL and Prefix List caches. An attempt to lock a mutex failed with the error reported.

Recommended Action    Abort the configuration operation and restart the parser server. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ACL-IP_ACL_PARSE-3-REGISTER Could not register parser callback for clearing the ACL cache. Config operation cannot proceed

Explanation    The callback could not be registered and without it the cache cannot be purged when the config operation is committed. This would lead to problems trying to reconfigure the same ACL in a later session, so the config has been refused until the callback can be registered. Repeating the config operation may be sufficient to resolve this problem.

Recommended Action    Restart the parser server. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ACL-IP_ACL_PARSE-3-SYNC Could not sync up the cache for ACL [chars]. Error: [chars]

Explanation    An error occured syncing the cache with SysDB. The error is reported in the message.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ACL-IP_ACL_PARSE-4-INSERT Could not insert an entry in the [chars] cache, suspect corruption in the cache

Explanation    Before adding an entry to the packet filter parser cache a check is done to be sure it is not there. If the entry was not there but the insertion failed the associated command will be blocked by the parser.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ACL-IP_ACL_PARSE-4-REMOVE An entry known to be in the [chars] cache could not be removed, suspect corruption in the cache

Explanation    Before removing an entry from the packet filter parser cache a check is done to be sure it is there. If the entry was there but the removal failed the associated command will be blocked by the parser.

Recommended Action    If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ACL-IP_ACL_PARSE-4-SESSION Attempt to configure ACL [chars] in session [dec] when already configured from session [dec]

Explanation    The ACL or Prefix List has already been configured in another config session and cannot be configured in this config session until that one is committed or aborted.

Recommended Action    Complete and commit the other config session.

IPV4_ACL_DP Messages

Error Message     
 
    
    
   

%ACL-IPV4_ACL_DP-1-ACL_OOR_FAIL Configuration exceeded oor limit for [chars], [dec]

Explanation    Limits exceeded.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ACL-IPV4_ACL_DP-1-DUP_NAME '[chars]' is already configured as [chars]

Explanation    The access-list/prefix-list name is already in use.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ACL-IPV4_ACL_DP-1-IP_ACL_DP_ADD_ACL_FAIL ipv4_acl_dp_add_acl failed for acl [chars], [chars] [[dec]] [chars]

Explanation    ipv4_acl_dp_add_acl failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ACL-IPV4_ACL_DP-3-INIT ipv4_acl_dipatch initialization failed at [chars] with error [chars], exiting

Explanation    ipv4_acl_dispatch initialization failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

IPV4_ACL_LTRACE Messages

Error Message     
 
    
    
   

%ACL-IPV4_ACL_LTRACE-3-INIT ltrace_init failed for '[chars]': [chars]

Explanation    ltrace_initialization_failed

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

IPV4_ACL_MGR Messages

Error Message     
 
    
    
   

%ACL-IPV4_ACL_MGR-1-IP_ACL_MGR_ADD_ACL_FAIL ipv4_acl_mgr_add_acl failed for acl [chars], [chars] [[dec]] [chars]

Explanation    ipv4_acl_mgr_add_acl failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ACL-IPV4_ACL_MGR-3-INIT IPv4 ACL Manager initialisation failed in function [chars]: [chars]

Explanation    Initialisation failed, details of the error are in the message.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

IPV4_ACL Messages

Error Message     
 
    
    
   

%ACL-IPV4_ACL-1-IPACCESSDLLOPEN failed to open dll: [chars]

Explanation    The specified DLL could not be found.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ACL-IPV4_ACL-1-IPACCESSDLSYM dlsym lookup for ipv4_acl_api_functions failed for dll: [chars]

Explanation    dlsym failed for symbol ipv4_acl_api_functions for the specified dll.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ACL-IPV4_ACL-1-IPACCESSGETLISTFAIL ipv4_acl_getlist_evm failed for acl [chars], error [[dec]] [chars]

Explanation    ipv4_acl_getlist_evm failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ACL-IPV4_ACL-1-IPACCESSGETLISTPFAIL ipv4_acl_getlist_producer failed for acl [chars], [chars] error [[dec]] [chars]

Explanation    ipv4_acl_getlist_producer failed.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ACL-IPV4_ACL-1-IPACCESSNOMEM insufficient memory for dll: [chars]

Explanation    there is not sufficient memory available to load the specified dll.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ACL-IPV4_ACL-3-IPACCESSPTHREAD failed to [chars] ACL mutex, error [[dec]]: [chars]

Explanation    The mutex used to protect access to the ACL data structure could not be locked or unlocked. The error message will include details of the particular failure. Because the mutex could not be used the process was restarted to recover from the failure.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ACL-IPV4_ACL-6-IPACCESSLOGDP access-list [chars] ([dec]) [chars] [chars] [chars] [chars]- [chars] ([dec]/[dec]), [dec] packet[chars]

Explanation    A packet matching the log criteria for the given access list was detected.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ACL-IPV4_ACL-6-IPACCESSLOGNP access-list [chars] ([dec]) [chars] [dec] [chars] [chars]- [chars], [dec] packet[chars]

Explanation    A packet matching the log criteria for the given access list was detected.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ACL-IPV4_ACL-6-IPACCESSLOGP access-list [chars] ([dec]) [chars] [chars] [chars]([dec]) [chars]- [chars]([dec]), [dec] packet[chars]

Explanation    A packet matching the log criteria for the given access list was detected.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ACL-IPV4_ACL-6-IPACCESSLOGRP access-list [chars] ([dec]) [chars] [chars] [chars] [chars]- [chars], [dec] packet[chars]

Explanation    A packet matching the log criteria for the given access list was detected.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ACL-IPV4_ACL-6-IPACCESSLOGS access-list [chars] ([dec]) [chars] [chars] [dec] packet[chars]

Explanation    A packet matching the log criteria for the given access list was detected.

Recommended Action    No action is required.

IPV6_ACL_DAEMON Messages

Error Message     
 
    
    
   

%ACL-IPV6_ACL_DAEMON-3-INIT Failed to initialize [chars], because of [chars]

Explanation    Initialization process such as getting an evm failed.

Recommended Action    sysmgr will retry to start the daemon. If not recovered, it's a fatal condition. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. *REDUCE*

Error Message     
 
    
    
   

%ACL-IPV6_ACL_DAEMON-3-SAMENAME [chars] already exists as [chars]. Please use different name

Explanation    Same name used for acl and prefix-list.

Recommended Action    No action is required.

IPV6_ACL Messages

Error Message     
 
    
    
   

%ACL-IPV6_ACL-1-IPACCESSDLLOPEN failed to open dll: [chars]

Explanation    The specified DLL could not be found.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ACL-IPV6_ACL-1-IPACCESSDLSYM dlsym lookup for ipv6_acl_api_functions failed for dll: [chars]

Explanation    dlsym failed for symbol ipv6_acl_api_functions for the specified dll.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ACL-IPV6_ACL-1-IPACCESSNOMEM insufficient memory for dll: [chars]

Explanation    there is not sufficient memory available to load the specified dll.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

Error Message     
 
    
    
   

%ACL-IPV6_ACL-6-IPACCESSLOGDP access-list [chars] ([dec]) [chars] [chars] [chars] [chars]- [chars] ([dec]/[dec]), [dec] packet[chars]

Explanation    A packet matching the log criteria for the given access list was detected.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ACL-IPV6_ACL-6-IPACCESSLOGNP access-list [chars] ([dec]) [chars] [dec] [chars] [chars]- [chars], [dec] packet[chars]

Explanation    A packet matching the log criteria for the given access list was detected.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ACL-IPV6_ACL-6-IPACCESSLOGP access-list [chars] ([dec]) [chars] [chars] [chars]([dec]) [chars]- [chars]([dec]), [dec] packet[chars]

Explanation    A packet matching the log criteria for the given access list was detected.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ACL-IPV6_ACL-6-IPACCESSLOGRP accesss-list [chars] ([dec]) [chars] [chars] [chars] [chars]- [chars], [dec] packet[chars]

Explanation    A packet matching the log criteria for the given access list was etected.

Recommended Action    No action is required.

Error Message     
 
    
    
   

%ACL-IPV6_ACL-6-IPACCESSLOGS access-list [chars] ([dec]) [chars] [chars] [dec] packet[chars]

Explanation    A packet matching the log criteria for the given access list was detected.

Recommended Action    No action is required.