|
|
|
|
|
|
|
|
42071 |
sumRespTime |
Yes |
unsigned32 |
Delay |
Response time is the time between the client request and the corresponding first response packet from the server, as observed at the observation point. The value of this information element is the sum of all response times observed for the responses of this flow. For the average, this field must be divided by numRespsCountDelta (42060). |
milliseconds |
collect connection delay response to-server sum |
42073 |
minRespTime |
Yes |
unsigned32 |
Delay |
Minimum response time observed for this flow. |
milliseconds |
collect connection delay response to-server min |
42072 |
maxRespTime |
Yes |
unsigned32 |
Delay |
Maximum response time observed for this flow. |
milliseconds |
collect connection delay response to-server max |
42060 |
numRespsCo untDelta |
Yes |
unsigned32 |
deltaCounter |
Total number of responses sent by the server. |
responses |
collect connection server counter responses |
42061 |
numResps1CountDelta |
Yes |
unsigned32 |
deltaCounter |
Histogram Bucket 1 for response time. The bucket boundary should be specified in an option template or predefined in the reporting entity. |
responses |
collect connection delay response to-server histogram |
42062 |
numResps2CountDelta |
Yes |
unsigned32 |
deltaCounter |
Histogram Bucket 2 for response time. The bucket boundary should be specified in an option template or predefined in the reporting entity. |
responses |
collect connection delay response to-server histogram |
42063 |
numResps3CountDelta |
Yes |
unsigned32 |
deltaCounter |
Histogram Bucket 3 for response time. The bucket boundary should be specified in an option template or predefined in the reporting entity. |
responses |
collect connection delay response to-server histogram |
42064 |
numResps4CountDelta |
Yes |
unsigned32 |
deltaCounter |
Histogram Bucket 4 for response time. The bucket boundary should be specified in an option template or predefined in the reporting entity. |
responses |
collect connection delay response to-server histogram |
42065 |
numResps5CountDelta |
Yes |
unsigned32 |
deltaCounter |
Histogram Bucket 5 for response time. The bucket boundary should be specified in an option template or predefined in the reporting entity. |
responses |
collect connection delay response to-server histogram |
42066 |
numResps6CountDelta |
Yes |
unsigned32 |
deltaCounter |
Histogram Bucket 6 for response time. The bucket boundary should be specified in an option template or predefined in the reporting entity. |
responses |
collect connection delay response to-server histogram |
42067 |
numResps7CountDelta |
Yes |
unsigned32 |
deltaCounter |
Histogram Bucket 7 for response time. The bucket boundary should be specified in an option template or predefined in the reporting entity. |
responses |
collect connection delay response to-server histogram |
42068 |
numLateRespsCountDelta |
Yes |
unsigned32 |
deltaCounter |
Total number of late responses sent by the server. A late response is a response whose time is greater than the last bucket. This informational element can be treated as the last bucket that has no end limit. |
responses |
collect connection delay response to-server histogram |
42087 |
sumServerNwkTime |
Yes |
unsigned32 |
Delay |
Server network delay is the round-trip time between the observation point and the server, calculated once per session. The value of this information element is the sum of all server network delays observed for the sessions of this flow. For the average, this field must be divided by connectionCountNew (278) |
milliseconds |
collect connection delay network to-server sum |
42089 |
minServerNwkTime |
Yes |
unsigned32 |
Delay |
Minimum server network delay observed for the sessions of this flow. |
milliseconds |
collect connection delay network to-server min |
42088 |
maxServerNwkTime |
Yes |
unsigned32 |
Delay |
Maximum server network delay observed for the sessions of this flow. |
milliseconds |
collect connection delay network to-server max |
42084 |
sumClientNwkTime |
Yes |
unsigned32 |
Delay |
Client network delay is the round-trip time between the observation point and the client, calculated once per session. The value of this information element is the sum of all client network delays observed for the sessions of this flow. For the average, this field must be divided by connectionCountNew (278). |
milliseconds |
collect connection delay network to-client sum |
42086 |
minClientNwkTime |
Yes |
unsigned32 |
Delay |
Minimum client network delay observed for the sessions of this flow. |
milliseconds |
collect connection delay network to-client min |
42085 |
maxClientNwkTime |
Yes |
unsigned32 |
Delay |
Maximum client network delay observed for the sessions of this flow. |
milliseconds |
collect connection delay network to-client max |
42036 |
retransPackets |
Yes |
unsigned32 |
deltaCounter |
Number of packets retransmitted by the client |
packets |
collect connection client counter packets retransmitted |
42081 |
sumNwkTime |
Yes |
unsigned32 |
Delay |
Network delay is the round-trip time between the client and the server, as measured by the observation point, calculated once per session. The value of this information element is the sum of all network delays observed for the sessions of this flow. For the average, this field must be divided by connectionCountNew (278). |
milliseconds |
collect connection delay network client-to-server sum |
42083 |
minNwkTime |
Yes |
unsigned32 |
Delay |
Yes |
milliseconds |
collect connection delay network client-to-server min |
42082 |
maxNwkTime |
Yes |
unsigned32 |
Delay |
Yes |
milliseconds |
collect connection delay network client-to-server max |
42074 |
sumServerRespTime |
Yes |
unsigned32 |
Delay |
Yes |
milliseconds |
collect connection delay application sum |
42076 |
minServerRespTime |
Yes |
unsigned32 |
Delay |
Minimum application delay observed for the responses of this flow. |
milliseconds |
collect connection delay application min |
42075 |
maxServerRespTime |
Yes |
unsigned32 |
Delay |
Maximum application delay observed for the responses of this flow. |
milliseconds |
collect connection delay application max |
42077 |
sumTotalRespTime |
Yes |
unsigned32 |
Delay |
Total delay is the time between the client request and the first response packet from the server, as seen by the client. This is the sum of all total delays observed for the responses of this flow. For the average, this field must be divided by numRespsCountDelta (42060) |
milliseconds |
collect connection delay response client-to-server sum |
42079 |
minTotalRespTime |
Yes |
unsigned32 |
Delay |
Minimum total delay observed for the responses of this flow. |
milliseconds |
collect connection delay response client-to-server min |
42078 |
maxTotalRespTime |
Yes |
unsigned32 |
Delay |
Maximum total delay observed for the responses of this flow. |
milliseconds |
collect connection delay response client-to-server max |
42041 |
sumTransactionTime |
Yes |
unsigned32 |
Duration |
Transaction time is the time between the client request and the corresponding last response packet from the server, as observed at the observation point. The value is the sum of all transaction times observed for this flow. For the average, this field must be divided by transactionCountDelta (42040). |
milliseconds |
collect connection transaction duration sum |
42043 |
minTransactionTime |
Yes |
unsigned32 |
Duration |
Minimum transaction time observed for this flow. |
milliseconds |
collect connection transaction duration min |
42042 |
maxTransactionTime |
Yes |
unsigned32 |
Duration |
Maximum transaction time observed for this flow. |
milliseconds |
collect connection transaction duration max |
42040 |
transactionCountDelta |
Yes |
unsigned32 |
deltaCounter |
Total number of completed transactions observed for this flow. |
|
collect connection transaction counter complete |
45004 |
clientIPv4Address |
Yes |
ipv4Address |
identifier |
The IPv4 client address in the IP packet header. This may be the source or destination IP address, depending on the first packet of the connection. The client is the device that triggered the session creation, and remains the same for the life of the session. |
address |
<collect | match> client ipv4 address |
45008 |
clientTransportPort |
Yes |
unsigned16 |
identifier |
Client transport port identifier. This may be the source or destination transport port. The client is the device that triggered the session creation, and remains the same for the life of the session. |
number |
<collect | match> client transport port |
45006 |
clientIPv6Address |
Yes |
ipv6Address |
identifier |
The IPv6 client address in the IP packet header. The client is the device that triggered the session creation, and remains the same for the life of the session. |
address |
<collect | match> client ipv6 address |
45005 |
serverIPv4Address |
Yes |
ipv4Address |
identifier |
The IPv4 server address in the IP packet header. The server is the device that replies to the client, and remains the same for the life of the session. |
address |
<collect | match> server ipv4 address |
45009 |
serverTransportPort |
Yes |
unsigned16 |
identifier |
Server transport port identifier. This may be the source or destination transport port. The server is the device that replies to the client, and remains the same for the life of the session. |
number |
<collect | match> server transport port |
45007 |
serverIPv6Address |
Yes |
ipv6address |
identifier |
IPv6 server address in the IP packer header. The server is the device that replies to the client, and remains the same for the life of the session. |
address |
<collect | match> server ipv6 address |
235 |
egressVRFID |
No |
unsigned32 |
identifier |
Unique identifier of the VRF name where the packets of this flow are being sent. This identifier is unique per metering process. |
number |
<collect | match> routing vrf output |
58 |
vlanId |
No |
unsigned16 |
identifier |
IEEE 802.1Q VLAN identifier (VID) extracted from the tag control Information field that was attached to the IP packet. This field is collected only for a monitor attached in the ingress direction. |
number |
<collect | match> datalink source-vlan-id |
59 |
postVlanId |
No |
unsigned16 |
identifier |
The definition of this information element is identical to the definition of information element "vlanId," except that it reports a potentially modified value caused by a middlebox function after the packet has passed the observation point. |
number |
<collect | match> datalink destination-vlan-id |
209 |
tcpOptions |
No |
unsigned64 |
flags |
TCP options in packets of this flow. The information is encoded in a set of bit fields. For each TCP option, there is a bit in this set. The bit is set to 1 if any observed packet of this flow contains the corresponding TCP option. Otherwise, if no observed packet of this flow contained the respective TCP option, the value of the corresponding bit is 0. |
bitmap |
collect transport tcp option map |
37083 |
tcpWindowSizeMin |
Yes |
unsigned32 |
identifier |
Minimum TCP window size. |
octets |
collect transport tcp window-size minimum |
37084 |
tcpWindowSizeMax |
Yes |
unsigned32 |
identifier |
Maximum TCP window size. |
octets |
collect transport tcp window-size maximum |
37092 |
tcpWindowSizeSum |
Yes |
unsigned64 |
identifier |
Sum of TCP window size values. Divide by packet counter to get average. |
octets |
collect transport tcp window-size sum |
37086 |
tcpMaximumSegmentSize |
Yes |
unsigned16 |
identifier |
TCP maximum segment size. |
octets |
collect transport tcp maximum-segment-size |
299 |
serverPackets |
No |
unsigned64 |
identifier |
Total number of layer 4 packets in a flow from the server. The server is the device that replies to the client, and remains the same for the life of the session. |
packets |
collect connection server counter packets long |
232 |
serverOctets |
No |
unsigned64 |
identifier |
Total number of layer 4 payload bytes in a flow from the server. The server is the device that replies to the client, and remains the same for the life of the session. |
octets |
collect connection server counter bytes long |
231 |
initiatorOctets |
No |
unsigned64 |
identifier |
Total number of layer 4 payload bytes in a flow from the initiator. The initiator is the device that triggered the session creation, and remains the same for the life of the session. |
octets |
collect counter initiator bytes long |
298 |
clientPackets |
No |
unsigned64 |
identifier |
Total number of layer 4 packets in a flow from the client. The client is the device that triggered the session creation, and remains the same for the life of the session. |
packets |
collect connection client counter packets long |
56 |
sourceMacAddress |
No |
macAddress |
identifier |
IEEE 802 source MAC address field. This field is collected only for a monitor attached in the ingress direction. |
MAC |
<collect | match> datalink mac source address input |
57 |
postDestinationMacAddress |
No |
macAddress |
identifier |
The definition of this information element is identical to the definition of information element "destinationMacAddress," except that it reports a potentially modified value caused by a middlebox function after the packet has passed the observation point. |
MAC |
<collect | match> datalink mac destination address output |
80 |
destinationMacAddress |
No |
macAddress |
identifier |
IEEE 802 destination MAC address field. This field is collected only for a monitor attached in the ingress direction. |
MAC |
<collect | match> datalink mac destination address input |
81 |
postSourceMacAddress |
No |
macAddress |
identifier |
The definition of this information element is identical to the definition of information element "sourceMacAddress," except that it reports a potentially modified value caused by a middlebox function after the packet has passed the observation point. |
MAC |
<collect | match> datalink mac source address output |
41000 |
classHierarchy |
Yes |
Var-Len |
identifier |
Identifies the policy-map hierarchy for different policy-map types. The field contains the policy-id, followed by a list of classes representing the policy hierarchy: {Pi | Ck ... Cl}.
A dedicated option template contains the policy and class id mapping to name and type. |
number |
<collect | match> policy performance-monitor classification hierarchy |
42020 |
servicesWaasSegment |
Yes |
unsigned8 |
identifier |
WAAS optimization "segment" can have one of the following values: |
number |
<collect | match> services waas segment |
Unknown |
0 |
|
Client Unoptimized |
1 |
|
Server Optimized |
2 |
|
Client Optimized |
4 |
|
Server Unoptimized |
8 |
|
Pass-Through |
16 |
|
42021 |
servicesWaasPassThroughReason |
Yes |
unsigned8 |
identifier |
WAAS optimization pass-through reason can have one of the following values: |
number |
collect services waas passthrough-reason |
PT_NO_PEER |
1 |
|
PT_RJCT_CAP |
2 |
|
PT_RJCT_RSRCS |
3 |
|
PT_RJCT_NO_LICENSE |
4 |
|
PT_APP_CONFIG |
5 |
|
PT_GLB_CONFIG |
6 |
|
PT_ASYMMETRIC |
7 |
|
PT_IN_PROGRESS |
8 |
|
PT_INTERMEDIATE |
9 |
|
|
|
|
|
|
PT_OVERLOAD |
10 |
|
PT_INT_ERROR |
11 |
|
PT_APP_OVERRIDE |
12 |
|
PT_SVR_BLACKLIST |
13 |
|
PT_AD_VER_MISMTCH |
14 |
|
PT_AD_AO_INCOMPAT |
15 |
|
PT_AD_AOIM_PROGRESS |
16 |
|
PT_DIRM_VER_MISMTCH |
17 |
|
PT_PEER_OVERRIDE |
18 |
|
PT_AD_OPT_PARSE_FAIL |
19 |
|
PT_AD_PT_SERIAL_MODE |
20 |
|
PT_SN_INTERCEPTION_ACL |
21 |
|
PT_IP_FRAG_UNSUPP_PEER |
22 |
|
PT_CLUSTER_MEMBER_INDX |
23 |
|
PT_FLOW_QUERY_FAIL_INDX |
24 |
|
PT_FLOWSW_INT_ACL_DENY_INX |
25 |
|
PT_UNKNOWN_INDX |
26 |
|
PT_FLOWSW_PLCY_INDX |
27 |
|
PT_SNG_OVERLOAD_INDX |
28 |
|
PT_CLUSTER_DEGRADE_INDX |
29 |
|
PT_FLOW_LEARN_FAIL_INDX |
30 |
|
PT_OVERALL_INDX |
31 |
|
PT_ZBFW |
32 |
|
PT_RTSP_ALG |
33 |
|