Cisco IOS Release 15.x SY System Message Guide
HA_IFINDEX through MACSEC
Downloads: This chapterpdf (PDF - 4.54MB) The complete bookPDF (PDF - 26.81MB) | Feedback

HA_IFINDEX Messages

Table Of Contents

HA_IFINDEX Messages

HARDWARE Messages

HARDWARE-3

HAWKEYE-1

HAWKEYE-3

HA_CONFIG_SYNC-3

HA_EM-3

HA_EM-4

HA_EM-6

HA_EM-7

HD-1

HD-5

HA_WD Messages

HA_WD-3

HA_WD-6

HA_WD-7

HDLC Messages

HDLC-1

HDLC-4

HDV-1

HDV-2

HDV-3

HDX-3

HLFM Messages

HLFM-3

HMM_ASYNC-3

HMM_ASYNC-4

HOOD-3

HOOD-5

HP100VG Messages

HP100VG

HP100VG-3

HP100VG-5

HSRP Messages

HSRP-3

HSRP-4

HSRP-5

HTSP-3

HTSP-5

HTTP Messages

HTTP-3

HTTP-6

HUB-1

HUJR-3

HW Messages

HW-2

HWMATM_MOD-3

HW_API Messages

HW_API-3

HW_VPN-1

HW_VPN-6

HWIF_QOS Messages

HYPERION Messages

HYPERION-3

HYPERION-4

HYPERION-5

ICC Messages

ICC-2

ICC-3

ICC-4

ICC-5

ICC-6

I82543-1

I82543-2

IBM2692-1

ICE-3

ICC_ISSU_NEGO Messages

ICC_ISSU_NEGO-3

ICC_ISSU_TAGGING Messages

ICC_ISSU_TAGGING-3

ICPM Messages

IDBINDEX_SYNC-3

IDBINDEX_SYNC-4

IDBINDEX_SYNC_KEY Messages

IDBINDEX_SYNC_KEY-3

IDBMAN-3

IDBMAN Messages

IDBMAN-4

IDBMAN-6

IDB_IDENTITY-3

IDMGR Messages

IDMGR-3

IDPROM-3

IDPROM-4

IDS-4

IDTATM25-1

IDTATM25-3

IDTATM25-6

IF Messages

IF-2

IF-3

IF-4

IFDAMP Messages

IFDAMP-5

IFMGR Messages

IFMGR-3

IFMGR-4

IFMGR-7

IFS Messages

IFS-3

IFS-4

IGMP Messages

IGMP-3

IGMP-6

ILACC Messages

ILACC-1

ILACC-3

ILACC-4

ILACC-5

ILPOWER Messages

ILPOWER-3

ILPOWER-5

ILPOWER-7

ILPOWER_RF Messages

ILPOWER_RF-3

IMAGEMGR Messages

IMA-1

IMA-4

IMA-5

IMAGEMGR-6

IMAGE_SIMFS Messages

IMAGE_SIMFS-3

IMAGE_VFS Messages

INBAND Messages

INBAND-3

INBAND-6

INBAND_or_EOBC-3

INDXOBJ-3

INTERFACE_API Messages

INTERFACE_API-1

INTERFACE_API-3

INTERFACE_API-4

INTF_SYNC-2

INTF_SYNC-3

INTF_SYNC-5

INTR_MGR Messages

IOCARD-3

IOS_LICENSE-2

IOS_LICENSE-3

IOS_LICENSE_IMAGE_APPLICATION-3

IOS_LICENSE_IMAGE_APPLICATION-6

IP Messages

IP-3

IP-4

IP-5

IP-6

IPA-3

IPACCESS Messages

IPACCESS-2

IPACCESS-4

IPC Messages

IPC-2

IPC-3

IPC-4

IPC-5

IPC-6

IPCGRP-3

IPCOIR-3

IPCOIR-4

IPC_RPM-3

IPC_RSP_CBUS-3

IP_DEVICE_TRACKING Messages

IP_DEVICE_TRACKING-4

IP_DEVICE_TRACKING_HA-3

IPFAST Messages

IPFAST-2

IPFAST-3

IPFAST-4

IPFAST-5

IPFAST-6

IPFLOW-2

IPFLOW-3

IPFLOW-4

IPMCAST_LIB-3

IPMCAST_LIB-4

IP_HOST_ISSU Messages

IP_HOST_ISSU-2

IP_HOST_ISSU-3

IPMCAST_LIB Messages

IPMCAST_LIB-4

IPMCAST_LIB-6

IPMCAST_LIB_RPF

IPMOBILE-2

IPMOBILE-3

IPM_C54X-1

IPM_C54X-3

IPM_C54X-4

IPM_DSPRM-3

IPM_NV_EEPROM-3

IPNAT Messages

IPNAT-4

IPNAT-6

IPRT Messages

IPRT-2

IPRT-3

IPRT-4

IPSECV6 Messages

IPSECV6-4

IPV6FIB-3

IPV6FIB-4

IP_SNMP Messages

IP_SNMP-4

IPV6 Messages

IPV6-3

IPV6-4

IPV6-6

IPV6_ACL-6

IPV6_ADDRESS-3

IPV6_ADDRMGR-3

IPV6_FORWARDING-3

IPV6_INTF-3

IPV6_INTF-4

IPV6_ND-3

IPV6_ND-4

IPV6_ND-6

IPV6_RIP-3

IPV6_ROUTING-3

IPV6_ROUTING-4

IPV6_ROUTING-6

IPX-3

IPX-6

IPX-7

IP_VRF Messages

IP_VRF-3

IP_VRF-4

ISA Messages

ISA-1

ISA-6

ISDN-1

ISDN-2

ISDN-3

ISDN-4

ISDN-6

ISIS-L2 Messages

ISSU Messages

ISSU-3

ISSU-4

ISSU_CS Messages

ISSU_CS-3

ISSU_CS_DL_MESSAGES Messages

ISSU_CS_DL_MESSAGES-3

ISSU_ERROR Messages

ISSU_ERROR-2

ISSU_ERROR-3

ISSU_PROCESS Messages

ISSU_PROCESS-3-UNAVAILABLE

ISSU_PROCESS-3-ABORTVERSION

ISSU_PROCESS-7

ISSU_PROXY Messages

ISSU_PROXY-3

IVR-3-UNAVAILABLE

IXP_MAP Messages

IXP_MAP-3

IXP_MAP-4

KERBEROS-3

KEYMAN Messages

KEYMAN-4

KINEPAK-3

KEYSTORE_SP Messages

KEYSTORE_SP-3

LANMGR Messages

L2 Messages

L2-3

L2_AGING Messages

L2_AGING-2

L2_APPL Messages

L2_APPL-0

L2_APPL-4

L2_ASIC Messages

L2_ASIC-0

L2_ASIC-1

L2_ASIC-2

L2_ASIC-4

L2TP Messages

L2TP-3

L2TP-5

L2TUN Messages

L2TUN-3

L2_MMC Messages

L2_MMC-3

L2_MMC-4

L3_ASIC Messages

L3_ASIC-1

L3_ASIC-4

L3_COMMON Messages

L3_COMMON-3

L2CAC-5

L2CTRL-3

L2MCAST_SNOOP-4

L2MCAST_SNOOP-6

L2MC_QUERIER-4

L2MC_QUERIER-6

L2MMC

L2R-4

L2TM-3

L2TM-7

L3_MGR Messages

L3_MGR-3

L3_MGR_ISSU Messages

L3_MGR_ISSU-3

L3MM Messages

L3MM-4

L3MM-5

L3TCAM Messages

L3TCAM-3

LACP Messages

LACP-4

LANCE-1

LANCE-3

LANCE-4

LANCE-5

LANE-3

LANE-4

LANE-5

LANE-6

LANMGR-2

LANMGR-4

LAPB Messages

LAPB-2

LAPB-3

LAPB-4

LAPP_OFF-1

LAPP_OFF-2

LAPP_OFF-4

LAT-3

LB-3

LB-5

LC Messages

LC-2

LC-3

LCB-3

LC_10G Messages

LC_10G-3

LC_2P5G Messages

LC_2P5G-3

LCMDC Messages

LCMDC-3

LCMDC-4

LCMDC-5

LCMDC-6

LCR Messages

LCR-6

LDP Messages

LDP-3

LDP-4

LDP-5

LFD Messages

LFD-2

LFD-3

LFD-4

LFD-5

LFD-6

LIBT2F-2

LIBT2F-3

LIBTIFF-3

LIBTIFF-4

LIC

LICENSE-1

LICENSE-2

LICENSE-3

LICENSE-4

LICENSE-6

LIC_AGENT-3

LINEPROTO Messages

LINK Messages

LINK-0

LINK-2

LINK-3

LINK-4

LINK-5

LINK-6

LLC-2

LINK-SP

LISP Messages

LLDP Messages

LLDP-4

LLIST-3

LNMC-3

LOGIN-3

LPD-3

LRE_CPE Messages

LRE_CPE-3

LRE_CPE-5

LRE_LINK Messages

LRE_LINK-3

LRE_LINK-4

LRE_LOG Messages

LRE_LOG-7

LRE_UPGRADE Messages

LRE_UPGRADE-2

LRE_UPGRADE-3

LRE_UPGRADE-4

LS1010_CCM-2

LS1010_CCM-3

LS1010_CCM-4

LSD Messages

LSD-2

LSD-3

LSD-4

LSD_CLIENT Messages

LSD_CLIENT-2

LSD_CLIENT-3

LSD_HA Messages

LSD_HA-2

LSD_HA-3

LSPV Messages

LSPV-3

LSS Messages

LSS-1

LSS-3

LSS-4

LTL Messages

LTL-2

MAB Messages

MAB-5

MACDB Messages

MAC_LIMIT Messages

MAC_LIMIT-4

MAC_MOVE

MAC_MOVE-4

MAILBOX-3

MAILBOX-6

MAILBOX-7

MARINA-4

MBRI-1

MBRI-3

MBUS-2

MBUS-3

MBUS-6

MBUS_SYS-0

MBUS_SYS-3

MC3810_DSX1-3

MCAST Messages

MCAST-2

MCAST-3

MCAST-4

MCAST-5

MCAST-6

MCAST_MQC Messages

MCAST_MQC-3

MCASTRED Messages

MCASTRED-3

MCAST_RP Messages

MCAST_RP-4

MCM Messages

MCM-3

MCT1E1 Messages

MCT1E1-2

MCT1E1-3

MCX Messages

MCX-3

MDEBUG Messages

MDEBUG-2

MDR_SM Messages

MDR_SM-3

MDR_SM-4

MDR_SM_LC Messages

MDR_SM_LC-3

MDR_SM_LC-4

MDR_SM_PROXY Messages

MDR_SM_PROXY-3

MDR_SM_PROXY-4

MDS Messages

MDS-2

MDS-4

MDT Messages

MDT-4

MDT-5

MDX Messages

MDX-1

MEM_ECC Messages

MEM_ECC-2

MEM_ECC-3

MEM_MGR Messages

MEM_MGR-3

MEMPOOL Messages

METOPT Messages

METOPT-2

METOPT-3

METOPT-4

METOPT-6

METOPT_DRV Messages

METOPT_DRV-3

METS-2

METS-3

METOPT_DI-1

METOPT_DI-3

MFI Messages

MFI-3

MFI-4

MFIB Messages

MFIB-2

MFIB-3

MFIB-6

MFIB_CONST_RP

MFIB_DB-3

MFIB_IPC-2

MFIB_MRIB-3

MFIB_PLTF

MFI_LABEL_BROKER

MGCP-2

MGCP-3

MGCP-4

MFIB_CONST_LC Messages

MGCP_APP-6

MIC-2

MIC-3

MICA-1

MICA-3

MICA-4

MICA-5

MICA-6

MIF68840-1

MIF68840-3

MIF68840-5

MIMIC-3

MIMIC-4

MFIB_CONST_RP Messages

MFIB_STATS Messages

MISA Messages

MISA-1

MISA-6

MK5-1

MK5-3

MK5-5

MISTRAL Messages

MISTRAL-3

MLD_PROT Messages

MLI Messages

MLI-3

MLS_ACL_COMMON Messages

MLS_ACL_COMMON-3

MLS_ACL_COMMON-4

MLSCEF Messages

MLSCEF-2

MLSCEF-4

MLSCEF-7

MLS_CEF_ISSU Messages

MLS_CEF_ISSU-2

MLSM Messages

MLSM-2

MLSM-4

MLSM-6

MLS_RATE Messages

MLS_RATE-4

MLS_STAT Messages

MLS_STAT-4

M32X-1

M32X-3

M32X-5

MAB-5

MACSEC-3

MACSEC-4


HA_IFINDEX Messages

This section contains high availability system messages.

Error Message    %HA_IFINDEX-2-INIT_ERROR: [chars] 

Explanation    This is a critical error message about a high availability system initilization status or condition. A message of this type indicates that a failure occurred during high availability system initialization.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

HARDWARE Messages

This section contains hardware resources messages.

HARDWARE-3

Error Message    %HARDWARE-3-ASICNUM_ERROR: Port-ASIC number [dec] is invalid 

Explanation    Each port ASIC is identified by an ID. The port ASIC number that is specified in the message text is invalid. This condition indicates an internal error.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HARDWARE-3-INDEX_ERROR: Index value [dec] is invalid 

Explanation    An index was attempted to be placed into the hardware table, but that index is out of the configured range.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HARDWARE-3-INTRNUM_ERROR: Port-ASIC Interrupt number [dec] is invalid 

Explanation    An interrupt ID that was used for a port ASIC is invalid.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HARDWARE-3-PORTNUM_ERROR: port number [dec] is invalid 

Explanation    Each interface in a given port ASIC is identified by an index value. The port number used is not within the specified range.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HARDWARE-3-STATS_ERROR: Statistics ID [dec] is invalid 

Explanation    Each statistic that is supported by the port ASIC is identified using an ID. The ID provided by the caller is not within the configured range.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

HAWKEYE-1

Error Message    %HAWKEYE-1-UNAVAILABLE: HAWKEYE(bay %d), Port adapter requires Rev 2 
CPU, shutting down bay 

Explanation    This message is specific to Cisco 7200 series router platforms. It indicates that the device driver has detected an NPE150 CPU version earlier than revision 2. The token ring device driver requires capabilities of a NPE150 revision 2 and later CPU.

Recommended Action    Upgrade the 7200 router processor to an NPE150 Revision 2 or later.

Error Message    %HAWKEYE-1-UNAVAILABLE: Only found %d interfaces on bay %d, shutting 
down bay 

Explanation    This message may be emitted during IOS initialization or after a token ring port adapter/module is OIR inserted. The message indicates that the token ring device driver was unable to communicate with all of the interfaces expected to be on the port adapter/module. This could mean that one or more of the interfaces is not functioning.

Recommended Action    Re-seat the port adapter/module in the slot. Also try installing it in another slot if available. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HAWKEYE-1-UNAVAILABLE: PCI memory unavailable for %s 

Explanation    The device driver for this interface was unable to allocate the necessary amount of shared memory between the driver and the interface hardware. This condition can occur if the system contains less than the recommended minimum amount of SRAM for the current interface combination. Shared memory blocks are required for the interface to function. So, this interface will be inoperable until the memory shortage is corrected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

HAWKEYE-3

Error Message    %HAWKEYE-3-UNAVAILABLE: %s failed to initialize - %s 

Explanation    The token ring interface encountered an error while attempting to open a connection to the ring. The specific error that occured is described in the last half of the error message as one of the following: 1) 'microcode checksum failed' - the MAC microcode was found to be corrupted inside the interface's local memory. 2) 'failed to build receive descriptor ring' - there was not enough system memory available to allocate receive buffers for packets. 3) 'init failed' - the interface hardware rejected the device driver's request to configure and open the interface.

Recommended Action    Reset the interface using the 'clear interface token' exec command. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HAWKEYE-3-UNAVAILABLE: Interface %s, adapter check error 

Explanation    The token ring interface encountered an unrecoverable error condition while it was operating and connected to the ring. The interface will automatically shut itself down.

Recommended Action    Issue the 'clear interface token' command to restart the interface. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

HA_CONFIG_SYNC-3

Error Message    %HA_CONFIG_SYNC-3-UNAVAILABLE: %s 

Explanation    Active and Standby configuration out of sync LBL what was attempted and what went wrong will be printed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HA_CONFIG_SYNC-3-UNAVAILABLE: %s 

Explanation    Bulk config sync failure, the reason for the failure will be provided in the string

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HA_CONFIG_SYNC-3-UNAVAILABLE: %s 

Explanation    General Config Sync Problem

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HA_CONFIG_SYNC-3-UNAVAILABLE: %s 

Explanation    Line by Line sync failure what was attempted and what went wrong will be printed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HA_CONFIG_SYNC-3-UNAVAILABLE: %s [%s] 

Explanation    Bulk config sync filesys failure, the reason for the failure will be provided in the string

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HA_CONFIG_SYNC-3-UNAVAILABLE: %s with error code [ %s ] 

Explanation    An ISSU Config Sync Registration Error occurred. The details about what was attempted and what went wrong will be printed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HA_CONFIG_SYNC-3-UNAVAILABLE: CONFIG SYNC %s msg_type[%d], rc[%d] 

Explanation    An ISSU Config Sync failed to transform messge. The details about what was attempted and what went wrong will be printed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HA_CONFIG_SYNC-3-UNAVAILABLE: CONFIG SYNC Failed to get MTU Size for 
session[%d] msg_type[%d], MTU[%d], rc[%d] 

Explanation    An ISSU Config Sync failed to get Messge MTU. The details about what was attempted and what went wrong will be printed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HA_CONFIG_SYNC-3-UNAVAILABLE: Cannot communicate boot variable to 
standby (%s) 

Explanation    Active failed to send the boot variable specified to standby. A reload or a switchover operation will likely result in the standby booting a wrong image.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HA_CONFIG_SYNC-3-UNAVAILABLE: Cannot communicate config register to 
standby 

Explanation    Active failed to send the config register to standby. The active and standby supervisors won't have the same config registers.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HA_CONFIG_SYNC-3-UNAVAILABLE: IPC operation failed for [ %s ] with 
error code [ %s ] 

Explanation    A config sync error occurred. The details about what was attempted and what went wrong will be printed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HA_CONFIG_SYNC-6-UNAVAILABLE: Bulk Sync succeeded 

Explanation    Bulk Sync has succeeded

Recommended Action    No action necessary

Error Message    %HA_CONFIG_SYNC-6-UNAVAILABLE: CONFIG SYNC : Subcode not matching for 
command %s Active subcode[0x%x], Standby subcode[0x%x] 

Explanation    The line by line synchronization of a command has succeeded. A command entered on the active system was successfully synchronized with the standby system. However, the sub code of Parser Return Code, that were returned by the Active and Standby systems were different. However, the sub code of Parser Return Code, that were returned by the Active and Standby systems where different.

Recommended Action    Normally, no action is required. If, however, any problems with line by line synchronization are found, copy this message exactly as it appears on the console or in the system log and contact your Cisco technical support representative.

HA_EM-3

Error Message    %HA_EM-3-UNAVAILABLE: %s: Checksum error for policy %s - this policy 
will not be run 

Explanation    The checksum computed for the specified policy does not match the original checksum computed when the policy was registered.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-3-UNAVAILABLE: %s: Error attempting to fetch event information: 
%s. 

Explanation    The Embedded Event Manager Policy Director failed to receive event info for a callback.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-3-UNAVAILABLE: %s: Error occurred while fetching TTY number. 

Explanation    The Embedded Event Manager failed to fetch a TTY number.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-3-UNAVAILABLE: %s: Error occurred while fetching action 
information: %d. 

Explanation    The Embedded Event Manager Policy Director failed to gather action information registered for the event.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-3-UNAVAILABLE: %s: Error occurred while fetching variable 
information: %d. 

Explanation    The Embedded Event Manager Policy Director was unable to set the variable with the requested information.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-3-UNAVAILABLE: %s: Error occurred while performing action: %s. 

Explanation    The Embedded Event Manager Policy Director failed to perform an action for the registered event.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-3-UNAVAILABLE: %s: Failed to create process 

Explanation    The process create function reports an error

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-3-UNAVAILABLE: %s: Failed to look up in the table the 
registration specification for policy %s. 

Explanation    A table lookup for the registration specification for the policy failed.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-3-UNAVAILABLE: %s: Failed to perform CNS action: %s 

Explanation    The Embedded Event Manager failed attempting to send a CNS message.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-3-UNAVAILABLE: %s: No such event id found. 

Explanation    An internal software error occurred.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-3-UNAVAILABLE: %s: No such event spec id found. 

Explanation    The Embedded Event Manager Policy Director could not find the event for the event spec. ID.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-3-UNAVAILABLE: %s: Published event type does not match event 
spec. 

Explanation    The Embedded Event Manager Policy Director detected a mis-match in event type between the published event and the event spec.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-3-UNAVAILABLE: %s: The %s event detector I/O queue empty. 

Explanation    The I/O queue is empty at this point, and should not be.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-3-UNAVAILABLE: %s: The I/O queue empty. 

Explanation    The I/O queue is empty at this point, and should not be.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-3-UNAVAILABLE: %s: The Unable to enqueue packet onto queue. 

Explanation    The queue is not in a state to handle enqueues.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-3-UNAVAILABLE: %s: The Unable to initialize queue. 

Explanation    The queue cannot be initialized.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-3-UNAVAILABLE: %s: The following oid has become unavailable: %s 

Explanation    The registered oid is no longer available in the system.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-3-UNAVAILABLE: %s: The hash computation routine reported an 
error; %s 

Explanation    The fh_hash_md5_fd() function reported the specified error.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-3-UNAVAILABLE: %s: This processor is not in ACTIVE state (state 
= %d). Switchover must be performed on ACTIVE processor. 

Explanation    Switchovers must occur on ACTIVE unit, not STANDBY unit.

Error Message    %HA_EM-3-UNAVAILABLE: %s: Unable to initialize queue; 

Explanation    The queue initialization function reported an error.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-3-UNAVAILABLE: %s: Unable to open %s; %s 

Explanation    The open function reported an error.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-3-UNAVAILABLE: %s: Unable to open connection to CNS Event Agent: 
%d 

Explanation    The CNS Action process failed to open CNS handle to Event Agent.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-3-UNAVAILABLE: %s: Unknown event type found in applet. 

Explanation    The Embedded Event Manager applet had an unknown event type.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-3-UNAVAILABLE: %s: callback handler process create failed for 
eid: %d 

Explanation    The process_create function reported an error trying to create the callback handler process.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-3-UNAVAILABLE: %s: could not find environment variable: %s 

Explanation    The Embedded Event Manager policy director could not find the environment variable specified in the action message.

Recommended Action    Only use well known Embedded Event Manager environment variables. If the message continues to occur, copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-3-UNAVAILABLE: %s: could not initialize Embedded Event Manager 
service: %s 

Explanation    An internal error was detected when initializing Embedded Event Manager service.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-3-UNAVAILABLE: %s: could not initialize queue 

Explanation    An internal error was detected when initializing Embedded Event Manager queue.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-3-UNAVAILABLE: %s: error processing xml buffer 

Explanation    An error occurred processing the event publish information xml buffer.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-3-UNAVAILABLE: %s: failed to create an IPC port: %s 

Explanation    Embedded Event Manager failed to create an IPC port.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-3-UNAVAILABLE: %s: failed to execute callback 

Explanation    Failed to execute callback routine.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-3-UNAVAILABLE: %s: failed to open an IPC port: %s 

Explanation    Embedded Event Manager failed to open an IPC port.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-3-UNAVAILABLE: %s: failed to register an IPC port: %s 

Explanation    Embedded Event Manager failed to register an IPC port.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-3-UNAVAILABLE: %s: fh_init failed : %d 

Explanation    The fh_init function reported an error trying to initialize EEM for a callback process.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-3-UNAVAILABLE: %s: file checksum mismatch 

Explanation    The checksum value of an installed policy does not match the value provided by the installation manager.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-3-UNAVAILABLE: %s: unable to set state for tracking object 
number %u; object does not exist or is not a stub-object. 

Explanation    The Embedded Event Manager applet attempted to set the state of a tracking object that does not exist.

Recommended Action    Only set the state of tracking objects that have already been configured in the system. If the message continues to occur, copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-3-UNAVAILABLE: Error attempting to access an unopened CLI 
session: %s 

Explanation    An error occurred attempting to access an unopened CLI session: %s

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HA_EM-3-UNAVAILABLE: Error disconnecting from CLI session: %s 

Explanation    An error occurred while disconnecting from the CLI session.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HA_EM-3-UNAVAILABLE: Error executing applet %s statement %s 

Explanation    The Embedded Event Manager policy director found an error when processing an applet.

Recommended Action    Check syntax of applet statement. If the message continues to occur, copy the message exactly as it appears, and report it your technical support representative.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HA_EM-3-UNAVAILABLE: Error occurred when sending mail to SMTP server: 
%s : %s 

Explanation    An unexpected error occurred when sending mail to SMTP server.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HA_EM-3-UNAVAILABLE: Unable to establish CLI session: %s 

Explanation    Unable to establish CLI session.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HA_EM-3-UNAVAILABLE: Unable to read CLI response: %s 

Explanation    Unable to read CLI response.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HA_EM-3-UNAVAILABLE: Unable to send CLI command: %s 

Explanation    Unable to send CLI command.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Recommended Action   

Error Message    %HA_EM-3-UNAVAILABLE: Unable to send notification using all SMTP 
servers 

Explanation    An unexpected error occurred when sending mail to all SMTP servers.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Recommended Action   

Error Message    %HA_EM-3-UNAVAILABLE: Use of the 	rack keyword in the correlate 
statement is not supported in this image. 

Explanation    The Embedded Event Manager Track ED is not supported in this image.

Recommended Action    Track ED is not available in this image

HA_EM-4

Error Message    %HA_EM-4-UNAVAILABLE: %s: No tag %s found corresponding to this event 
publish. 

Explanation    The Embedded Event Manager policy director could not associate the tagname with a published event.

Recommended Action    Only use tagnames in the action info type event reqinfo command which correspond to the published event.

Error Message    %HA_EM-4-UNAVAILABLE: %s: failed to allocate an IPC buffer 

Explanation    Embedded Event Manager failed to allocate a buffer from IPC.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-4-UNAVAILABLE: %s: failed to create an event: %s 

Explanation    Failed to create an Embedded Event Manager event.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-4-UNAVAILABLE: %s: failed to register an event: %s 

Explanation    Failed to register an Embedded Event Manager event.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-4-UNAVAILABLE: %s: failed to send an IPC message: %s 

Explanation    Embedded Event Manager failed to send a message through IPC.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-4-UNAVAILABLE: Cisco Signature not found or invalid. %s has been 
registered as a user policy. 

Explanation    Cisco Signature not found or invalid.

Recommended Action    Sign with Cisco signature.

Error Message    %HA_EM-4-UNAVAILABLE: No action configured for applet %s 

Explanation    No action has been configured for this applet.

Recommended Action    Configure at least one action for this applet.

Error Message    %HA_EM-4-UNAVAILABLE: No event configured for applet %s 

Explanation    No event has been configured for this applet.

Recommended Action    Configure an event for this applet.

Error Message    %HA_EM-4-UNAVAILABLE: No threads are configured to service event class 
%s 

Explanation    The Embedded Event Manager has no scheduler threads to service this event class.

Recommended Action    Configure threads for the event class using the 'event manager scheduler' command.

HA_EM-6

Error Message    %HA_EM-6-UNAVAILABLE: %s: %s 

Explanation    The Embedded Event Manager reports an error on Event Manager configuration

Recommended Action    Check the EEM applet or policy configuration

Error Message    %HA_EM-6-UNAVAILABLE: %s: Cannot change a class %s %s to priority LAST. 
LAST is for default policies only 

Explanation    Embedded Event Manager Scheduler Command can only change a default policy to priority LAST.

Recommended Action    The command is applicable to default policies only.

Error Message    %HA_EM-6-UNAVAILABLE: %s: Cannot modify a LAST policy to class %s. LAST 
policies are for class default only. 

Explanation    Embedded Event Manager LAST policy is for default class only.

Recommended Action    The command is applicable to default policies only.

Error Message    %HA_EM-6-UNAVAILABLE: %s: Error adding trapvar to queue %s 

Explanation    The trap variable was not added to the queue.

Recommended Action    Check the EEM applet or policy configuration

Error Message    %HA_EM-6-UNAVAILABLE: %s: No variable %s 

Explanation    The variable is not defined.

Recommended Action    Check the EEM applet or policy configuration

Error Message    %HA_EM-6-UNAVAILABLE: %s: Policy has requested a hardware switchover 

Explanation    An Embedded Event Manager policy requested that a hardware switchover occur.

Error Message    %HA_EM-6-UNAVAILABLE: %s: Policy has requested a hardware switchover 

Explanation    An Embedded Event Manager policy requested that a hardware switchover occur.

Recommended Action    None

Error Message    %HA_EM-6-UNAVAILABLE: %s: Policy has requested a system reload; 

Explanation    An Embedded Event Manager policy requested that the system be reloaded.

Error Message    %HA_EM-6-UNAVAILABLE: %s: cannot %s a running policy with jobid %d. 

Explanation    Embedded Event Manager Scheduler Command cannot change a running policy.

Recommended Action    The command is not applicable to a running policy.

Error Message    %HA_EM-6-UNAVAILABLE: %s: duplicate oid 

Explanation    The oid is a duplicate

Recommended Action    Check the EEM applet or policy configuration

Error Message    %HA_EM-6-UNAVAILABLE: %s: number of values exceeded %d 

Explanation    The number of values per variable exceeded the maximum

Recommended Action    Check the EEM applet or policy configuration

Error Message    %HA_EM-6-UNAVAILABLE: %s: unable to modify the policy to class %s: 
scheduling rule unavailable. 

Explanation    There is no scheduler rule configured to service this event class.

Recommended Action    Please configure a scheduler rule before modifying the event.

Error Message    %HA_EM-6-UNAVAILABLE: Error compiling regular expression: %s 

Explanation    An error was encountered when compiling the given regular expression.

Recommended Action    Check syntax of regular expression pattern. If the message continues to occur, copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-6-UNAVAILABLE: Failed to retrieve context for key %s: %s 

Explanation    Failed to context retrieve variable information for event.

Recommended Action    Ensure context information with the given key is saved. If the message continues to occur, copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-6-UNAVAILABLE: Failed to save variable context for key %s: %s 

Explanation    Failed to context save variable information for event.

Recommended Action    Ensure context information with the same key is not already saved. If the message continues to occur, copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-6-UNAVAILABLE: Invalid operand in action, expected value within 
range %ld to %ld, received: %s 

Explanation    Arithmetic actions only accept valid long integer values.

Recommended Action    Ensure value provided to action is long integer.

Error Message    %HA_EM-6-UNAVAILABLE: Invalid operand in arithmetic division, cannot 
divide by zero 

Explanation    Arithmetic division does not allow divide by zero.

Recommended Action    Ensure denominator provided to division action is non-zero.

Error Message    %HA_EM-6-UNAVAILABLE: Policy update has copied %d bytes from %s to %s 

Explanation    An EEM policy has been copied as a result of an event manager update command

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HA_EM-6-UNAVAILABLE: Policy update has failed to register policy %s %s 

Explanation    An EEM policy has failed to be registered as a result of an event manager update command

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HA_EM-6-UNAVAILABLE: Policy update has failed to unregister policy %s 
%s 

Explanation    An EEM policy has failed to be unregistered as a result of an event manager update command

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HA_EM-6-UNAVAILABLE: Policy update has successfully re-registered 
policy %s 

Explanation    An EEM policy has been successfully re-registered as a result of an event manager update command

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

HA_EM-7

Error Message    %HA_EM-7-UNAVAILABLE: %s 

Explanation    Internal error. The event detector has failed to get a free history list entry.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-7-UNAVAILABLE: %s: %d 

Explanation    The event detector has exceeded its maximum number of retries to send a pulse to the embedded event manager to notify of an event publish.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-7-UNAVAILABLE: %s: %s 

Explanation    Internal error. The event detector has failed to rebuild the metric list from the checkpointed records.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-7-UNAVAILABLE: %s: %s 

Explanation    The SNMP error code.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-7-UNAVAILABLE: %s: %s guard word corrupted; %p 

Explanation    The guard word for the specified control block does not contain what is expected.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-7-UNAVAILABLE: %s: %s[%d] 

Explanation    Internal error. The event detector has failed to fetch a data element from the statistics data engine.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-7-UNAVAILABLE: %s: Application client library unable to handle 
message receive. 

Explanation    The API received a msg reply when it was not in a state to accept such messages.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-7-UNAVAILABLE: %s: CNS Event Agent not available: %d 

Explanation    The CNS Event Agent is currently not available.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-7-UNAVAILABLE: %s: Class %s: Maximum number of %d %s publish 
entries exceeded; some events have been discarded 

Explanation    An attempt to publish an event failed because there is no more room in the publish queue.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-7-UNAVAILABLE: %s: Failed to allocate Event Detector context 
control block; %s 

Explanation    The get_fd function reported an error trying to allocate a Event Detector context control block.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-7-UNAVAILABLE: %s: Failed to duplicate string %s; %s 

Explanation    The strdup function reported an error.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-7-UNAVAILABLE: %s: Failed to open Event Detector context 
control block 

Explanation    The open_fd function reported an error trying to open a Event Detector context control block.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-7-UNAVAILABLE: %s: Illegal SNMP address type 

Explanation    The SNMP address is illegal.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-7-UNAVAILABLE: %s: Invalid SNMP oid length %d 

Explanation    The SNMP oid has invalid length

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-7-UNAVAILABLE: %s: Invalid argument string: %s 

Explanation    An invalid argument string was passed to the specified function.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-7-UNAVAILABLE: %s: Policy execution %s 

Explanation    The Embedded Event Manager policy excution state has been changed to the state named in the message.

Error Message    %HA_EM-7-UNAVAILABLE: %s: SNMP IPV6 address is not supported 

Explanation    The IPV6 address is not supported.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-7-UNAVAILABLE: %s: SNMP build pdu failed 

Explanation    The SNMP pdu build has failed.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-7-UNAVAILABLE: %s: SNMP make pdu failed 

Explanation    The SNMP pdu make has failed.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-7-UNAVAILABLE: %s: SNMP proxy exec got event, but queue is empty 

Explanation    The SNMP proxy got event but the queue is empty.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-7-UNAVAILABLE: %s: SNMP request failed 

Explanation    The SNMP request has failed.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-7-UNAVAILABLE: %s: SNMP response cancelled 

Explanation    The SNMP response has been cancelled.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-7-UNAVAILABLE: %s: SNMP response error; error_status = %d 

Explanation    The SNMP response has error.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-7-UNAVAILABLE: %s: SNMP response has timed out 

Explanation    The SNMP response has timed out.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-7-UNAVAILABLE: %s: The script name is NULL 

Explanation    An invalid script name was passed as an argument into the specified function.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-7-UNAVAILABLE: %s: The system is unable to switch to standby 
processor. Switchover cancelled. 

Explanation    Switchovers must occur when STANDBY is available and ready.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-7-UNAVAILABLE: %s: Unable to add %s event detector command; 

Explanation    The Event detector failed to add command.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-7-UNAVAILABLE: %s: Unable to add action %s command; 

Explanation    Failed to add action command.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-7-UNAVAILABLE: %s: Unable to allocate %s; %s 

Explanation    The malloc function reported an error.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-7-UNAVAILABLE: %s: Unable to allocate %s; 

Explanation    The malloc function reported an error.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-7-UNAVAILABLE: %s: Unable to allocate memory for event publish 
timer block 

Explanation    Internal error. The event detector has failed to allocate memory for the event publish timer block.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-7-UNAVAILABLE: %s: Unable to build an oid string into a SNMP 
oid; oid = %s 

Explanation    The oid string was not able to build into a SNMP oid

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-7-UNAVAILABLE: %s: Unable to clear restart callback; 

Explanation    The CNS Action process failed to clear restart callback.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-7-UNAVAILABLE: %s: Unable to create SNMP octet community 
string; string = %s 

Explanation    The community string was not able to build into a SNMP octet string

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-7-UNAVAILABLE: %s: Unable to create a SNMP message; community 
= %s 

Explanation    The SNMP message failed to be created

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-7-UNAVAILABLE: %s: Unable to create a SNMP varbind 

Explanation    The oid failed to make into a SNMP varbind

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-7-UNAVAILABLE: %s: Unable to enqueue %s; 

Explanation    The enqueue function reported an error.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-7-UNAVAILABLE: %s: Unable to locate reg callback entry for pulse 
code %d 

Explanation    The registration callback handler was unable to validate the pulse code received.

Recommended Action    The pthread_create function reported an error.

Error Message    %HA_EM-7-UNAVAILABLE: %s: Unable to reallocate %s; %s 

Explanation    The realloc function reported an error.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-7-UNAVAILABLE: %s: Unable to send response for 
FH_MSG_CALLBACK_DONE %s 

Explanation    The registration callback handler was unable to send the FH_MSG_CALLBACK_DONE message to the Embedded Event Manager Server.

Recommended Action    The pthread_create function reported an error.

Error Message    %HA_EM-7-UNAVAILABLE: %s: Unable to set restart callback; 

Explanation    The CNS Action process failed to set the restart callback.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-7-UNAVAILABLE: %s: Unknown SNMP operation or response type %d 

Explanation    The operation or response type is unknown.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-7-UNAVAILABLE: %s: could not create a leaf timer 

Explanation    Internal error. The event detector has failed to create a managed leaf timer.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-7-UNAVAILABLE: %s: could not create an occurrence entry 

Explanation    Internal error. The event detector has failed to create an entry for the matched occurrence list.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-7-UNAVAILABLE: %s: could not remove an occurrence entry 

Explanation    Internal error. The event detector has failed to remove an entry for the matched occurrence list.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-7-UNAVAILABLE: %s: create_watched_boolean failed: %s 

Explanation    The create_watched_boolean function reported an error trying to create the watched boolean.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-7-UNAVAILABLE: %s: create_watched_boolean failed; %s 

Explanation    The create_watched_boolean function reported an error trying to create the watched boolean.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-7-UNAVAILABLE: %s: create_watched_queue failed; %s 

Explanation    The create_watched_queue function reported an error trying to create the watched queue.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-7-UNAVAILABLE: %s: delete_watched_boolean failed: %s 

Explanation    The delete_watched_boolean function reported an error trying to delete the watched boolean.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-7-UNAVAILABLE: %s: error attemting to format time string 

Explanation    Format time failure.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-7-UNAVAILABLE: %s: invalid comparison operator: %d 

Explanation    Internal error. The value comparison operator is invalid or not supported.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-7-UNAVAILABLE: %s: invalid last policy name replied %s 

Explanation    Internal error. The last policy name the script director replied to show fm policy registered command is an invalid policy name.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-7-UNAVAILABLE: %s: invalid statistics value type: %d 

Explanation    Internal error. The statistics data type is invalid or not supported.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-7-UNAVAILABLE: %s: invalid timer type: %d 

Explanation    Internal error. The timer type is invalid or not supported.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-7-UNAVAILABLE: %s: invalid timer: type=%d, timer=%p 

Explanation    Internal error. The timer value is invalid or not as expected.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-7-UNAVAILABLE: %s: not enough memory: %s 

Explanation    Allocating memory failed due to a low-memory condition.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-7-UNAVAILABLE: %s: resource_monitor_register failed; return 
code = %d 

Explanation    The resource_monitor_register function reported an error trying to register for RMI notifications.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

Error Message    %HA_EM-7-UNAVAILABLE: %s: unknown event type %d 

Explanation    An unknown Embedded Event Manager even type was detected.

Recommended Action    Copy the message exactly as it appears, and report it your technical support representative.

HD-1

Error Message    %HD-1-UNAVAILABLE: 4T Port Adapter fault on port %d in slot %d 

Explanation    A hardware or software error occurred.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message    %HD-1-UNAVAILABLE: Loopback not supported for a 4T DTE/X.21, port %d 
in slot %d 

Explanation    Loopback mode is not allowed when using an X.21 DTE cable on a Quad serial NIM port.

Recommended Action    Do not enable loopback, or use a different cable type.

Error Message    %HD-1-UNAVAILABLE: msgtxt_badringsize 

Explanation    An internal software error occurred.

Recommended Action    If message recurs, call your technical support representative for assistance.

HD-5

Error Message    %HD-5-UNAVAILABLE: Unit %d excessive modem control changes 

Explanation    Too many modem control interrupts have been received. The port was disabled to prevent excessive use of the CPU.

Recommended Action    Check the cable on the serial port.

HA_WD Messages

This section contains high availability system messages.

HA_WD-3

Error Message    %HA_WD-3-DM_SEND_PULSE: [chars]: could not send priority pulse to 
receiver: [chars] 

Explanation    An attempt to send a priority pulse to the receiver has failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HA_WD-3-PROCFS_PASS: [chars]: procfs pass ended in error after five 
consecutive passes 

Explanation    A call to the wd_procfs_per_process() function ended in error after five consecutive passes.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HA_WD-3-PTHRD_SETDETACHSTATE: [chars]: could not set detach state of 
a POSIX thread: [chars] 

Explanation    An internal error was detected when trying to set the detach state of a POSIX thread.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HA_WD-3-PTHRD_SETSCHEDPARAM: [chars]: could not set scheduler param 
of a POSIX thread: [chars] 

Explanation    An internal error was detected when trying to set the scheduler parameter of a POSIX thread.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HA_WD-3-RESTART_WDSYSMON: [chars]: Error returned from 
sysmgr_restart_self() [chars] 

Explanation    An error was returned from the sysmgr_restart_self API.

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

HA_WD-6

Error Message    %HA_WD-6-BLOCKED_THREAD: A default priority thread CPU starvation 
condition was detected 

Explanation    Some higher priority threads are blocking the CPU.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HA_WD-6-CPU: [chars] 

Explanation    The CPU is blocked by one or more high priority threads.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HA_WD-6-DLK: [chars] 

Explanation    An unresolved process or Cisco IOS scheduler deadlock was detected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

HA_WD-7

Error Message    %HA_WD-7-GUARD_WORD_CORRUPTED: [chars]: [chars] guard word corrupted 
[hex] 

Explanation    The named control block guard word was corrupted.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

HDLC Messages

This section contains high-level data link control (HDLC) messages.

HDLC-1

Error Message    %HDLC-1-ISSU_NOMEMORY: Unit [dec], no memory for [chars] 

Explanation    The requested operation could not be accomplished because of a low-memory condition.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

HDLC-4

Error Message    %HSRP-4-BADAUTH: Bad authentication from %s, group %d, remote state %s 

Explanation    Two routers participating in HSRP disagree on the valid authentication string.

Recommended Action    Use the standby authentication command to repair the HSRP authentication discrepancy between the local system and the one whose IP address is reported.

Error Message    %HDLC-4-ISSU_INCOMPATIBLE: hdlc-issu-compat: returned FALSE 

Explanation    The compatibility checking has failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HDLC-4-ISSU_SENDFAILED: HDLC ISSU: send message failed, rc = [dec] 

Explanation    An attempt to send a message has failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HDLC-4-ISSU_XFORM: [chars]: failed, rc=[chars] 

Explanation    The transform has failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

HDV-1

Error Message    %HDV-1-UNAVAILABLE: HDV in slot %d: No PCI memory available. 

Explanation    The system is experiencing memory exhaustion in the PCI/packet memory. This is probably due to heavy traffic congestion but could also be a software error.

Recommended Action    Review the configuration for performance bottlenecks. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HDV-1-UNAVAILABLE: HDV in slot %d: VIC daughter card (%s/0x%x) is 
unsupported 

Explanation    The VIC card plugged into the HDV is not of a supported type

Recommended Action    Replace this VIC with a type that is supported by this version of IOS, or change the version of IOS to support this VIC type.

Error Message    %HDV-1-UNAVAILABLE: HDV in slot %d: VIC daughter card has an unknown 
id of 0x%x 

Explanation    The software did not recognize the type of VIC card plugged into the HDV Port Module.

Recommended Action    Check the part number on the VIC card to see if it is supported in the version of IOS operational on the router or contact your technical support representative.

Error Message    %HDV-1-UNAVAILABLE: HDV in slot %d: no VIC card is inserted in the HDV. 

Explanation    The software did not detect the presence of a VIC card inserted in the HDV Port Module.

Recommended Action    Check that there is a VIC card inserted properly into the HDV. If so, then check the part number on the VIC card to see if it is supported in the version of IOS operational on the router or contact your technical support representative.

Error Message    %HDV-1-UNAVAILABLE: HDV in slot %d: packet size (%d) too big. 

Explanation    A packet greater than the 256 bytes received on this interface.

Recommended Action    The system should recover. No action is required. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

HDV-2

Error Message    %HDV-2-UNAVAILABLE: HDV in slot %d: An unrecoverable error occurred. 

Explanation    The HDV card experienced an internal unrecoverable error. This may be due to a internal firmware error or bad HDV hardware.

Recommended Action    Power down, reinsert the network module and reboot. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

HDV-3

Error Message    %HDV-3-UNAVAILABLE: HDV in slot %d: Incorrect %d PM-ID device not 
supported. 

Explanation    A interface controller device did not have the correct PM-ID.

Recommended Action    Check that the HDV is inserted properly. If necessary, turn off the router and reinsert the HDV Port Module. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HDV-3-UNAVAILABLE: HDV in slot %d: reports an invalid device id of 
%#x. 

Explanation    The HDV port module hardware may be bad or improperly seated.

Recommended Action    Power down, reinsert the network module and reboot. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HDV-3-UNAVAILABLE: HDV in slot %d: the HDV failed to initialize 
properly. 

Explanation    An initialization action failed for the HDV. This can be caused by a lack of system resources, improper or no VIC installed in the port module, or it may be bad HDV hardware.

Recommended Action    Power down. Check that a supported VIC module is properly installed in the HDV module. Reinsert the VIC module. Then reinsert the Port Module and reboot the router. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HDV-3-UNAVAILABLE: HDV in slot %d: the firmware on the port module 
did start properly. 

Explanation    The firmware on the card did not start after a reset. This is usually caused by a bad HDV module or improperly seated HDV module.

Recommended Action    Power down. Reinsert the HDV port module and reboot the router. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HDV-3-UNAVAILABLE: HDV in slot %d: the port module did not reset and 
start up properly. 

Explanation    The hardware on the card did not start after a reset. This is usually caused by a bad HDV module or improperly seated HDV module.

Recommended Action    Power down. Reinsert the HDV port module and reboot the router. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

HDX-3

Error Message    %HDX-3-UNAVAILABLE: On int %d/%d, unexpected state %d, event %d 

Explanation    A bad state, event pair is detected in the rx/tx half duplex state machine.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

HLFM Messages

This section contains Forwarding Manager messages.

HLFM-3

Error Message    %HLFM-3-MACFREE_ERROR: MAC address [enet], vlad [dec] is still 
referenced; cannot free 

Explanation    An attempt was made to free a MAC address before all references to it had been released.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HLFM-3-MAP_ERROR: IP address [IP_address] not in mac tables, 
mac-address [enet], vlan [dec] 

Explanation    The IP address and MAC address tables have lost their synchronization.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HLFM-3-MOD_SD: Failed to modify Station Descriptor with index [dec], 
vlan [dec], di [dec], error [dec], mad [dec], ref-count [dec] 

Explanation    The forwarding manager is attempting to modify a station descriptor that is no longer in use or is invalid.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

HMM_ASYNC-3

Error Message    %HMM_ASYNC-3-UNAVAILABLE: Digital modem %d/%d on Simm %d failed power 
on diagnostics. 

Explanation    Digital modem failed to pass power on diagnostics. It will not be used.

Recommended Action    If remaining Simm(s) passed diagnostics, remove or replace this problem Simm before continuing. Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message    %HMM_ASYNC-3-UNAVAILABLE: HMM Digital Modem Card %d experienced a TDM 
Synthesis Error. 

Explanation    Digital Modem Card failed to send or receive PCM data in time to avoid data loss. This may cause the modems to speed shift, retrain, or hangup.

Recommended Action    Verify that the DS1 interface(s) share a common clock source. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HMM_ASYNC-3-UNAVAILABLE: HMM Modem %d/%d Mailbox is Full, command %#x 
not sent. 

Explanation    Error delivering commands to Modem Module. This may be a transient failure. If this message repeats every 30 seconds it may indicate a failed Modem Module.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HMM_ASYNC-3-UNAVAILABLE: HMM Modem %d/%d failed to accept a new 
command. 

Explanation    Modem failed to accept a new command. This may be a transient failure or the modem may remain unusable until a system reset.

Recommended Action    You may try to reset the modem by issuing the clear modem slot/port command. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HMM_ASYNC-3-UNAVAILABLE: HMM: Digital Modem Card %d hardware 
exception : %s 

Explanation    This may be an intermittent or permanent hardware failure.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HMM_ASYNC-3-UNAVAILABLE: No memory for %s of unit %d 

Explanation    The router does not have enough memory to perform the function

Recommended Action    Consider adding more shared memory. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HMM_ASYNC-3-UNAVAILABLE: Received unknown message 0x%x at mail offset 
%d from modem %d/%d. 

Explanation    Received unidentifed message from modem. This is symtomatic of running with an incompatible version of modem firmware.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HMM_ASYNC-3-UNAVAILABLE: Simm %d in slot %d has halted due to a 
Runtime Error. 

Explanation    The Portware running on the Simm was halted due a runtime error. The six modems contained on the Simm have been marked Bad and are no longer usable until the system is reloaded.

Recommended Action    Copy the error message exactly as it appears, along with show modem and show modem log output, and report it to your technical support representative.

Error Message    %HMM_ASYNC-3-UNAVAILABLE: Unable to creaet pool %d raw Tx mode buffers 

Explanation    The router does not have enough I/O memory for buffers

Recommended Action    Consider adding more shared memory. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HMM_ASYNC-3-UNAVAILABLE: Unable to create TTY structure for line %d 

Explanation    Unable to create tty line control block for the specified line This may be due to not having enough memory in the router

Recommended Action    Consider adding more shared memory. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HMM_ASYNC-3-UNAVAILABLE: Unable to create pool for %d raw Rx mode 
buffers 

Explanation    The router does not have enough I/O memory for buffers

Recommended Action    Consider adding more shared memory. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HMM_ASYNC-3-UNAVAILABLE: Unable to download firmware image to digital 
modem card in slot %d. 

Explanation    Failed to bring up the processor on the digital modem card.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HMM_ASYNC-3-UNAVAILABLE: Unable to download modem firmware image to 
Simm %d in slot %d. 

Explanation    Failed to load modem firmware into the Simm.

Recommended Action    If firmware successfully loaded into remaining Simm(s), remove or replace this problem Simm before continuing. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HMM_ASYNC-3-UNAVAILABLE: Unknown Platform type to support HMM Network 
Module 

Explanation    The Network Module is not compatible with the current platform that it is plugged into.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

HMM_ASYNC-4

Error Message    %HMM_ASYNC-4-UNAVAILABLE: HMM Digital Modem Card %d contains no active 
modems. 

Explanation    There are no modems installed on the network module.

Recommended Action    Make sure the network module contains properly installed MICA-6DM Simm(s).

HOOD-3

Error Message    %HOOD-3-UNAVAILABLE: msgtxt_badunit 

Explanation    An internal software error occurred.

Recommended Action    If the message recurs, call your technical support representative for assistance.

HOOD-5

Error Message    %HOOD-5-UNAVAILABLE: Unit %d, HP100VG, cable error. Training failed 

Explanation    A 100VG cable or hub is faulty.

Recommended Action    If the message recurs, and either the cable or hub appears to be good, repair or replace the router module.

Error Message    %HOOD-5-UNAVAILABLE: Unit %d, HP100VG, no tone detected. Check cable, 
hub 

Explanation    A 100VG cable is faulty.

Recommended Action    If the message recurs, and either the cable or hub appears to be good, repair or replace the router module.

Error Message    %HOOD-5-UNAVAILABLE: Unit %d, excessive collisions 

Explanation    An Ethernet cable is broken or unterminated, or the transceiver is unplugged.

Recommended Action    If the transceiver appears to be properly terminated, repair or replace the router.

Error Message    %HOOD-5-UNAVAILABLE: Unit %d, lost carrier. Transceiver problem? 

Explanation    An Ethernet transceiver is unplugged or faulty.

Recommended Action    Repair or replace the controller.

HP100VG Messages

HP100VG

Error Message    %HP100VG-1-UNAVAILABLE: %s access to network denied 

Explanation    Access to the network is denied because of incompatible configuration.

Recommended Action    Check the configuration of the hub for Frame Format, Promiscuous, and Repeater bit to indicate proper configuration.

Error Message    %HP100VG-1-UNAVAILABLE: %s configuration not compatible with the 
network 

Explanation    Configuration of the router module is not compatible to the network

Recommended Action    Check the configuration of the hub for Frame Format, Promiscuous, and Repeater bit to indicate proper configuration

Error Message    %HP100VG-1-UNAVAILABLE: %s unable to login to the hub 

Explanation    Unable to login to the hub.

Recommended Action    Take action based on the following error messages.

Error Message    %HP100VG-1-UNAVAILABLE: On %s LAN segment 

Explanation    Two VG devices on the same LAN segment have the same MAC address.

Recommended Action    Check router configuration to make sure that no duplicate MAC address is configured.

Error Message    %HP100VG-1-UNAVAILABLE: Only found %d interfaces on bay %d, shutting 
down bay 

Explanation    No VG interface detected.

Recommended Action    Make sure 100VG PA is properly seated in the slot. Otherwise repair or replace the 100VG PA interface module.

HP100VG-3

Error Message    %HP100VG-3-UNAVAILABLE: %s hardware CAM device not found 

Explanation    Could not find Hardware CAM on the PA module

Recommended Action    Repair or replace the 100VG PA interface module.

Error Message    %HP100VG-3-UNAVAILABLE: %s packet buffer, pak=0x%x 

Explanation    A software or hardware error occurred. The HP100VG driver detected that the buffer ring is in an inconsistent and unrecoverable state.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message    %HP100VG-3-UNAVAILABLE: Bay %d device ID seen as %#x, expected %#x 

Explanation    Could not find 100VG PCI device

Recommended Action    Make sure 100VG PA is properly seated in the slot. Otherwise repair or replace the 100VG PA interface module.

HP100VG-5

Error Message    %HP100VG-5-UNAVAILABLE: %s cable fault; tone not detected 

Explanation    An 100VG cable is faulty.

Recommended Action    Repair or replace the cable. If either the cable appears to be good, repair or replace the VG PA interface module.

Error Message    %HP100VG-5-UNAVAILABLE: %s cable/hub problem? 

Explanation    The VG controller detects link to the hub is down due to cable, hub or vg controller problem.

Recommended Action    Repair or replace the cable or hub. If either the cable or hub appears to be good, repair or replace the VG PA interface module.

Error Message    %HP100VG-5-UNAVAILABLE: %s training failed 

Explanation    An 100VG cable or hub is faulty.

Recommended Action    Repair or replace the cable or hub. If the cable or hub appears to be good, repair or replace the VG PA interface module.

HSRP Messages

This section contains Hot Standby Router Protocol (HSRP) messages.

HSRP-3

Error Message    %HSRP-3-MISCONFIG: Attempt to change [chars] MAC address to [enet] when 
DECNET already running 

Explanation    An HSRP group attempted to become active on an interface that can only support a single MAC address and that is running DECnet. If the standby use-bia command has not been entered on the interface, HSRP would normally set the interface MAC address to the HSRP virtual MAC address, but this configuration is not allowed if DECnet is running.

Recommended Action    Enter the standby use-bia command on the interface.

Error Message    %HSRP-3-NOSOCKET: Unable to open socket 

Explanation    The system was unable to initialize an IP connection for the Hot Standby protocol.

Recommended Action    Make sure that there is at least one interface configured to run IP.

HSRP-4

Error Message    %HSRP-4-BADAUTH: Bad authentication from [IP_address], group [dec], 
remote state [chars] 

Explanation    Two routers participating in HSRP disagree on the valid authentication string.

Recommended Action    Use the standby authentication command to repair the HSRP authentication discrepancy between the local system and the one whose IP address is reported.

Error Message    %HSRP-4-BADAUTH2: Bad authentication from [IP_address] 

Explanation    Two routers participating in HSRP disagree on the valid authentication string.

Recommended Action    Use the standby authentication command to repair the HSRP authentication discrepancy between the local system and the one whose IP address is reported.

Error Message    %HSRP-4-BADVIP: [chars] Grp [dec] address [IP_address] is in the wrong 
subnet for this interface 

Explanation    The HSRP virtual IP address contained in the Hello message cannot be learned as it is not within a subnet configured on the interface.

Recommended Action    Check the configuration on all HSRP routers and ensure that the virtual IP address is within a configured subnet.

Error Message    %HSRP-4-DIFFVIP1: [chars] Grp [dec] active routers virtual IP address 
[IP_address] is different to the locally configured address [IP_address] 

Explanation    The HSRP virtual IP address contained in the Hello message from the active router is different from the virtual IP address configured locally.

Recommended Action    Check the configuration on all HSRP routers in the group and ensure they are all configured with the same virtual IP address.

Error Message    %HSRP-4-DUPADDR: Duplicate address [IP_address] on [chars], sourced by 
[enet] 

Explanation    The IP address in an HSRP message received on the specified interface is the same as the IP address of the router. Another router might be configured with the same IP address. The most likely cause is a network loop or a misconfigured switch that is causing the router to see its own HSRP Hello messages.

Recommended Action    Check the configurations on all the HSRP routers to ensure that the interface IP addresses are unique. Check that no network loops exist. If port channels are configured, check that the switch is correctly configured for port channels. Enter the standby use-bia command so that the error message displays the interface MAC address of the sending router, which can be used to determine if the error message is caused by a misconfigured router or a network loop.

Error Message    %HSRP-4-DUPVIP1: [chars] Grp [dec] address [IP_address] is already 
assigned to [chars] group [dec] 

Explanation    The HSRP virtual IP address contained in the Hello message cannot be learned as it is already assigned to a different HSRP group.

Recommended Action    Check the configuration on all HSRP routers and ensure that the virtual IP address of each HSRP group is unique.

Error Message    %HSRP-4-DUPVIP2: [chars] Grp [dec] address [IP_address] is already 
assigned on this interface 

Explanation    The HSRP virtual IP address contained in the Hello message cannot be learned as it is already assigned to this interface.

Recommended Action    Check the configuration on all HSRP routers and ensure that the virtual IP address of each HSRP group is unique.

Error Message    %HSRP-4-DUPVIP3: [chars] Grp [dec] address [IP_address] is already 
assigned to, or overlaps with, an address on another interface or application 

Explanation    The HSRP virtual IP address contained in the Hello message cannot be learned as it is already assigned to, or overlaps with, an address on another interface or application.

Recommended Action    Check the configuration on all HSRP routers and ensure that the virtual IP address of each HSRP group is unique.

HSRP-5

Error Message    %HSRP-5-STATECHANGE: [chars] Grp [dec] state [chars] -> [chars] 

Explanation    The router has changed state.

Recommended Action    No action is required.

HTSP-3

Error Message    %HTSP-3-UNAVAILABLE: no free event structure available from %s for DSP 
message 

Explanation    There were no event structures remaining in the system pools to alert the router of a voice or signaling event.

Recommended Action    Check that the voice port for which the event was reported is still operational. If not, clear the voice port.

Error Message    %HTSP-3-UNAVAILABLE: voice port %s: Ground Start trunking not 
supported 

Explanation    This voice port does not support the 'connection trunk' command when ground start signaling is configured. Trunking mode on this voice is supported when using loop start signaling.

Recommended Action    Shut down the voice port, remove the 'connection trunk' and/or 'signal groundStart' command from the voice port configuration, and unshut the voice port.

Error Message    %HTSP-3-UNAVAILABLE: voice port %s: call connection id [0x%x 0x%x 0x%x 
0x%x] 

Explanation    There was a capabilities mismatch between the two call legs. capabilities are negotiated between call legs for CODEC, VAD and FAX rate.

Recommended Action    Check that the dial peer configuration is appropriate for the interface in question. Also check that and configuration on the interface is correct.

Error Message    %HTSP-3-UNAVAILABLE: voice port %s: status=0x%x message=0x%x text=%s 

Explanation    The DSP reported a fatal error. All calls on the DSP were dropped and a DSP reload was attempted.

Recommended Action    Verify that the DSP reloaded properly by attempting to place a call on the affected voice port. Contact your technical support representative, include the full text of the error message.

HTSP-5

Error Message    %HTSP-5-UNAVAILABLE: Trunk port(channel) [%s] is %s 

Explanation    Trunk port:channel changed state.

Recommended Action    LOG_STD_NO_ACTION

HTTP Messages

This section contains Hypertext Transfer Protocol (HTTP) messages.

HTTP-3

Error Message    %HTTP-3-INIT_FAIL: HTTP Process Init failed. 

Explanation    Initialization of the HTTP subsystem has failed.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message    %HTTP-3-OUTOF_MEM: HTTP out of memory. 

Explanation    An error occurred during initialization of the HTTP process. The HTTP process could not create crucial internal data structures that are required for operation of the HTTP subsystem. The most likely reason for this condition is an exhaustion of system memory.

Recommended Action    Reduce other system activity to ease memory demands. if conditions warrant, upgrade to a larger memory configuration.

Error Message    %HTTP-3-PROC_NOCREAT: Unable to create HTTP process. 

Explanation    An error occurred during initialization of the HTTP process. The HTTP process that processes all HTTP requests and responses could not be created.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message    %HTTP-3-SERVER_RESTART_FAILED: Server restart failed. Disabling HTTP 
server. 

Explanation    TCP process was restarted affecting the HTTP server. Attempts to restart HTTP server failed.

Recommended Action    Check status of TCP process. Enable the HTTP server after TCP process has started.

HTTP-6

Error Message    %HTTP-6-SERVER_SETUP_FAILED: Server setup failed 

Explanation    Setup of the HTTP or HTTPS server to listen on the specified port number has failed.

Recommended Action    Disable the server, verify that port number is correct and enable the server. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

HUB-1

Error Message    %HUB-1-UNAVAILABLE: Bad port number %d 

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message    %HUB-1-UNAVAILABLE: Invalid hub type %d and number %d 

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message    %HUB-1-UNAVAILABLE: Read op %d not allowed 

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message    %HUB-1-UNAVAILABLE: Write op %d not allowed 

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message    %HUB-1-UNAVAILABLE: msgtxt_nomemory 

Explanation    The system detected that there is not enough memory for the hub initialization.

Recommended Action    If conditions warrant, upgrade to larger memory configuration.

HUJR-3

Error Message    %HUJR-3-UNAVAILABLE: Read/write failed [%s] 

Explanation    A read/write error occurred when accessing the hardware

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

HW Messages

This section contains hardware messages.

HW-2

Error Message    %HW-2-OBSOLETE_HW_VER: Module Version in [chars] is obsolete 
********************************************************************* * 
IMPORTANT !!! * * The module in [chars] is obsolete and must be returned * * via 
RMA to Cisco Manufacturing. If it is a lab unit, * * it must be returned to Proto 
Services for upgrade. * 
********************************************************************* 

Explanation    The specified hardware is obsolete and needs to be replaced.

Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

HWMATM_MOD-3

Error Message    %HWMATM_MOD-3-UNAVAILABLE: Unexpected null pointer in %s at %d 

Explanation    An internal software error occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

HW_API Messages

This section contains hardware API messages.

HW_API-3

Error Message    %HW_API-3-BACKWALK_REQUEST: Backwalk request failed, [chars] 

Explanation    A request to walk internal data structures has failed. Depending on the criticality of the data, the accuracy of forwarding may be affected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HW_API-3-BACKWALK_REQUEST_VALUE: Backwalk request failed, [chars] 
([hex]) 

Explanation    A request to walk internal data structures has failed. Depending on the criticality of the data, the accuracy of forwarding may be affected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HW_API-3-INVALID_CONTEXT: Invalid context [hex] 

Explanation    An internal API error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HW_API-3-INVALID_OBJ: Invalid object [hex] 

Explanation    An internal API error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HW_API-3-INVALID_TYPE: Invalid type [dec] 

Explanation    An internal API error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HW_API-3-INVALID_WALK_SPEC: Invalid walk spec [hex] 

Explanation    An internal API error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HW_API-3-NO_OBJ_TYPE_LIST_ENTRY: Invalid sw_obj_type ([dec]) used 
with obj_type_list 

Explanation    An internal API error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HW_API-3-NO_OBJ_TYPE_LIST_ENTRY2: Invalid sw_obj_link_type ([dec]) 
used with obj_type_list 

Explanation    An internal API error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HW_API-3-RESILIENCE_NO_HANDLER: No handlers in place for [chars] sw 
object creation failure. 

Explanation    An internal software error occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message     %HW_API-3-VECTOR: Failed to set [chars] vector for [chars], [chars] 

Explanation    An internal API error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HW_API-3-WALK_MODE_UNSUPPORTED: Walk mode '[chars]' unsupported 

Explanation    An internal API error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

HW_VPN-1

Error Message    %HW_VPN-1-UNAVAILABLE: %s: Command 0x%x failed with status 0x%x 

Explanation    A command was sent to the Encryption AIM, and it responded that the command had an error. The details of the failure depend upon the circumstances, but in all likelihood the Encryption AIM is faulty and should be replaced.

Recommended Action    Make a note of the error message and contact a Cisco representative. The EAIM will most likely need to be replaced.

Error Message    %HW_VPN-1-UNAVAILABLE: %s: EAIM responded incorrectly to hello: 
received 0x%x expected 0x%x 

Explanation    A command was sent to the Encryption AIM, and it was expected to echo back the data that was sent to it. Instead of receiving the expected data, the indicated data was received instead.

Recommended Action    Make a note of the error message and contact a Cisco representative. The EAIM will most likely need to be replaced.

Error Message    %HW_VPN-1-UNAVAILABLE: %s: Invalid Amount of RAM for PA ID, memsize = 
0x%x 

Explanation    The Power On Self Test (POST) reported an incorrect memory size.

Recommended Action    The EAIM must be replaced.

Error Message    %HW_VPN-1-UNAVAILABLE: %s: Invalid command reply: expected 0x%x 
received 0x%s 

Explanation    A command was sent to the Encryption AIM, and it's replay contained an unexpected reply code. The details of the failure depend upon the circumstances, but in all likelihood the Encryption AIM is faulty and should be replaced.

Recommended Action    Make a note of the error message and contact a Cisco representative. The EAIM will most likely need to be replaced.

Error Message    %HW_VPN-1-UNAVAILABLE: %s: Key management error, cmd=0x%x status=0x%x 

Explanation    An unexpected error occurred during the execution of a key management command by the EAIM.

Recommended Action    Make a note of the status value and contact a Cisco representative. The EAIM will most likely need to be replaced.

Error Message    %HW_VPN-1-UNAVAILABLE: %s: Packet Encryption/Decryption error, 
status=%u 

Explanation    An unexpected error occurred during the encryption and/or decryption of a packet.

Recommended Action    This message can occur occasionally during normal operation of the system. It may occur during the transition to a new session key for a Security Association. In such cases, it may be ignored. However, if it happens frequently, or is associated with traffic disruption, then make a note of the status value and contact a Cisco representative. The EAIM will most likely need to be replaced.

Error Message    %HW_VPN-1-UNAVAILABLE: %s: Power On Self Test failed, alert status = 
0x%x 

Explanation    The Power On Self Test (POST) for the EAIM failed.

Recommended Action    The EAIM must be replaced.

Error Message    %HW_VPN-1-UNAVAILABLE: %s: Timeout on reply to command to Encryption 
AIM 

Explanation    A command has been sent to the Encryption AIM, and there has not been a reply to the command in a reasonable amount of time. The Encryption AIM is faulty and should be replaced.

Recommended Action    Make a note of the error message and contact a Cisco representative. The EAIM will most likely need to be replaced.

Error Message    %HW_VPN-1-UNAVAILABLE: AIM in slot %u not supported by this HW 
revision. 

Explanation    The revision level of the C2600 'Elmer' PLD does not support encryption AIM. The PLD needs to be reprogrammed.

Recommended Action    The C2600 'Elmer' PLD needs to be reprogrammed to a later revision. Refer to CCO Release Notes for the C2600 and Encryption AIM for an explanation of how to reprogram the PLD.

Error Message    %HW_VPN-1-UNAVAILABLE: EAIM: Device Initialization failure 

Explanation    The EAIM failed to respond properly to attempts at initialization.

Recommended Action    The EAIM must be replaced.

Error Message    %HW_VPN-1-UNAVAILABLE: EAIM: Initialization failed at %s 

Explanation    The EAIM device would not reset properly. Indicative of a hardware failure.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative. The EAIM will need to be replaced.

Error Message    %HW_VPN-1-UNAVAILABLE: EAIM: Invalid PCI device ID: %u 

Explanation    The EAIM device has improperly identified itself on the router bus

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative. The EAIM will need to be replaced.

Error Message    %HW_VPN-1-UNAVAILABLE: Encryption AIM busy 

Explanation    You have entered a command which involves an Encryption AIM, but the Encryption AIM is busy executing another command.

Recommended Action    Wait until the present command has completed. If the present command doesn't seem to complete in a reasonable amount of time, then the Encryption AIM is defective and must be replaced.

Error Message    %HW_VPN-1-UNAVAILABLE: Encryption AIM not present in system 

Explanation    You have entered a command which involves an Encryption AIM, but no encryption AIM is present in the system.

Recommended Action    Don't enter encryption AIM commands unless an Encryption AIM is present. If an encryption AIM is installed, then it is defective and must be replaced.

Error Message    %HW_VPN-1-UNAVAILABLE: This Encryption AIM type not supported on this 
router platform 

Explanation    You have installed an encryption AIM designed for one particular type of router platform (e.g. C2600) on another router platform (e.g. C3620). Different Encryption AIMs are supported by each router platform.

Recommended Action    The Encryption AIM must be removed and one compatible with your router must be installed in its place.

HW_VPN-6

Error Message    %HW_VPN-6-UNAVAILABLE: %s: disabled 

Explanation    The EAIM has been disabled

Recommended Action    The EAIM will need to be replaced.

Error Message    %HW_VPN-6-UNAVAILABLE: %s: starting up 

Explanation    The specified EAIM has initialized successfully.

Recommended Action    This is an informational message only. It occurs in normal operation.

Error Message    %HW_VPN-6-UNAVAILABLE: Cannot support more than one Encryption AIMs 

Explanation    A second Encryption AIM was discovered present in the system. The Encryption AIM software only supports a single Encryption AIM. All other Encryption AIMs installed will be ignored.

Recommended Action    Remove one of the Encryption AIMs installed in your system.

HWIF_QOS Messages

This section contains HWIF QoS messages.

Error Message    %HWIF_QOS-6-EOM_FORCE_TRUSTED: EoMPLS on [chars] caused install of 
'trust cos' state 

Explanation    If EoMPLS is configured on the interface or any of its subinterfaces, the no trust state is automatically replaced by trust cos.

Recommended Action    Remove all EoMPLS configurations from the interface to restore the no trust state.

Error Message    %HWIF_QOS-6-EOM_RESTORE_UNTRUSTED: The 'no trust' state is restored on 
EoMPLS removal from [chars] 

Explanation    If EoMPLS is unconfigured on the interface and all its subinterfaces, the configured no trust state is restored.

Recommended Action    This is an informational message only. No action is required.

Error Message    %HWIF_QOS-6-EOM_TRUST_NOT_INSTALLED: 'no trust' command is not 
installed on [chars] in presence of EoMPLS 

Explanation    If EoMPLS is configured on the interface or any of its subinterfaces, the no trust command is not installed.

Recommended Action    Remove all EoMPLS configurations from the interface.

HYPERION Messages

This section contains Hyperion ASIC (HYPERION) messages.

HYPERION-3

Error Message    %HYPERION-3-FAILURE_INTR_CFG: Failure to setup the Hyperion device 
interrupts. 

Explanation    The internal ASIC on a line card could not be initialized. The device is not operational and has been disabled. The data path is not operational.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

HYPERION-4

Error Message    %HYPERION-4-EARL_BUS_SYNC_ERR: Failed to sync Earl bus, Hyperion 
version [dec] 

Explanation    The HYPERION ASIC in the line card failed to synchronize with the Earl bus.

Recommended Action    If traffic recovers, no action is required. Otherwise, copy the message exactly as it appears on the console or in the system log. Enter the show platform hardware hyperion all command to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HYPERION-4-HYP_RESET: Hyperion Error Interrupt. Resetting ASIC. 

Explanation    The Hyperion ASIC in the SPA or Enhanced FlexWAN module has received a fatal error. The ASIC is automatically reset, and the SPA or Enhanced FlexWAN module attempts to continue normal operation.

Recommended Action    No action is required if traffic recovers. If traffic does not recover, copy the error message exactly as it appears on the console or in the system log. Enter the show platform hardware hyperion all command to gather data that may help identify the cause of the error. If you cannot determine the cause of the error from the error message text or from the show platform hardware hyperion all output, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HYPERION-4-HYP_RESET: Hyperion ASIC reset, interrupt [chars] 

Explanation    The Hyperion ASIC in the SPA or Enhanced FlexWAN module has received a fatal error. The ASIC is automatically reset, and the SPA or Enhanced FlexWAN module attempts to continue normal operation.

Recommended Action    No action is required if traffic recovers. If traffic does not recover, copy the error message exactly as it appears on the console or in the system log. Enter the show platform hardware hyperion all command to gather data that may help identify the cause of the error. If you cannot determine the cause of the error from the error message text or from the show platform hardware hyperion all output, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HYPERION-4-UNEXPECTED_VERSION: Unexpected Hyperion version. 

Explanation    The line card is unable to recognize the version of the Hyperion ASIC.

Recommended Action    No action is required if traffic passes through the line card. If traffic does not pass through the line card, check the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl to determine in which version this problem is fixed and upgrade accordingly. If traffic does not pass after the upgrade, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

HYPERION-5

Error Message    %HYPERION-5-BUS_MODE_CHANGE: The System Switching Bus Mode changed to 
[chars] mode 

Explanation    The system switching bus interface device mode changed switching bus modes. The mode is specified in the system message.

Recommended Action    The supervisor engine instructed the module to change the mode on the switching bus. No action is required.

Error Message    %HYPERION-5-BUS_SEQ_ERR: Constellation bus Sequence Error. Resetting 
Hyperion ASIC. 

Explanation    The switch processor has detected a sequence error on the backplane bus. A reset sequence from the EARL has been called to recover from this error. System traffic should recover and continue normally.

Recommended Action    If traffic recovers, no action is required. If traffic does not recover, copy the error message exactly as it appears on the console or in the system log. Enter the show platform hardware hyperion all command to gather data that may help identify the cause of the error. If you cannot determine the cause of the error from the error message text or from the show platform hardware hyperion all output, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HYPERION-5-HYP_INIT_FAILURE: The Hyperion ASIC initialization failed 

Explanation    The Hyperion ASIC initialization was not successful. The Hyperion ASIC is not operational and is disabled.

Recommended Action    If traffic recovers, no action is required. If traffic does not recover, copy the error message exactly as it appears on the console or in the system log. Enter the show platform hardware hyperion all command to gather data that may help identify the cause of the error. If you cannot determine the cause of the error from the error message text or from the show platform hardware hyperion all output, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HYPERION-5-HYP_INTR_INFO: [chars] 

Explanation    This message provides more information about the interrupts from the backplane bus ASIC to the line card CPU.

Recommended Action    If traffic recovers, no action is required . Otherwise, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HYPERION-5-HYP_RESET_INFO: [chars] 

Explanation    This message provides more information about the interrupts leading to the reset of the backplane bus ASIC.

Recommended Action    If traffic recovers, no action is required . Otherwise, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %HYPERION-5-NULL_HYP_OBJECT: The Hyperion device object pointer is set 
to NULL 

Explanation    The memory location of the Hyperion ASIC device object is invalid. The Hyperion ASIC operation is disabled, and the device interrupt is now masked.

Recommended Action    If traffic recovers, no action is required. If traffic does not recover, copy the error message exactly as it appears on the console or in the system log. Enter the show platform hardware hyperion all command to gather data that may help identify the cause of the error. If you cannot determine the cause of the error from the error message text or from the show platform hardware hyperion all output, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

ICC Messages

This section contains Inter-Card Communication (ICC) messages.

ICC-2

Error Message    %ICC-2-NOMEM: No memory available for %s 

Explanation    The ICC subsystem could not obtain the memory it needed.

Recommended Action    If this error recurs, then issue the show tech-support and show logging commands, contact your Cisco technical support representative, and provide the representative with the gathered information.

ICC-3

Error Message    %ICC-3-MAST_BAD_FREE: ICC multicast memory already freed 

Explanation    One of the ICC multicast request's memory was found to be free when response arrived

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

ICC-4

Error Message    %ICC-4-BAD_ACCOUNTING: ICC received a bad class %d 

Explanation    The intercard communication (ICC) process received an invalid class and therefore cannot account for the message.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %ICC-4-COMM: Communication failure occurred while %s 

Explanation    A communication failure has occurred between this card and another card in the system.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %ICC-4-CONSISTENCY: Internal consistency check: %s 

Explanation    An internal inconsistency was found in some ICC data structures.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %ICC-4-HEARTBEAT: Card %d failed to respond to heartbeat 

Explanation    A communication failure has occurred between the primary and the specified line card.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

ICC-5

Error Message    %ICC-5-REQ_WATERMARK: [dec] pkts for class [chars] request [dec] are 
waiting to be processed 

Explanation    The processor has received packets for the class request and the packets are waiting to be processed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

ICC-6

Error Message    %ICC-6-INFO: [chars] [hex] [hex] [hex] 

Explanation    This message provides ICC subsystem generic information or error information.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %ICC-6-MCAST_TIMEOUT: ICC multicast request timed out 

Explanation    One of the ICC multicast request timed out without response.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

I82543-1

Error Message    %I82543-1-UNAVAILABLE: %s - Cannot create IDB subblock due to 
insufficient memory 

Explanation    There was insufficent system memory to create the subblock.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %I82543-1-UNAVAILABLE: %s - Could not install or use i82543 IDB 
subblock 

Explanation    An internal IOS error prevented the IDB subblock from being installed or used.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %I82543-1-UNAVAILABLE: %s, initialization failed, no buffer memory 

Explanation    The Ethernet port initialization failed due to insufficient memory

Recommended Action    The router requires more packet memory - consider upgrade. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %I82543-1-UNAVAILABLE: Could not init buffer pools 

Explanation    The driver failed to get a pool of buffers from IOS

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %I82543-1-UNAVAILABLE: Could not initialize structure 

Explanation    The driver failed to initialize a structure

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %I82543-1-UNAVAILABLE: Invalid Interface Descriptor Block 

Explanation    The driver tried to fetch the interface's IDB and failed

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %I82543-1-UNAVAILABLE: MAC Still in Reset 

Explanation    An attempt was made to access the MAC while it was in reset

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %I82543-1-UNAVAILABLE: Only found %d interfaces on bay %d, shutting 
down bay 

Explanation    Possible hardware error resulted in too few interfaces discovered

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %I82543-1-UNAVAILABLE: Plugin function table incomplete or missing 

Explanation    The driver could not access the PA's specific function table

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %I82543-1-UNAVAILABLE: Problem getting particle size 

Explanation    The driver was unable to get the particle size for this interface

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %I82543-1-UNAVAILABLE: Unknown IDBTYPE while starting i82543 

Explanation    The IDBTYPE in the interface's instance structure is undefined for this driver

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %I82543-1-UNAVAILABLE: Unknown media-type in subblock 

Explanation    The media-type specified in the driver subblock is invalid

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %I82543-1-UNAVAILABLE: Unknown or invalid chip mode (MII/TBI) 

Explanation    The driver subblock contains an invalid or undefined chip operating mode (MII or TBI mode)

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

I82543-2

Error Message    %I82543-2-UNAVAILABLE: Interface %s does not support ISL 

Explanation    ISL is not supported on the specified interface's hardware.

Recommended Action    LOG_STD_NO_ACTION

Error Message    %I82543-3-UNAVAILABLE: %s, error interrupt, csr_STATUS=%#x 

Explanation    The i82543 controller has signalled an error condition.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %I82543-3-UNAVAILABLE: %s, packet too big (%d), src %e, dst %e 

Explanation    The interface detects a packet larger than what is defined by MTU

Recommended Action    Check the other station's MTU setting LOG_STD_NO_ACTION

Error Message    %I82543-3-UNAVAILABLE: Bay %u, device number %u: unknown device (%#x) 

Explanation    Somehow the PA does not contain an Intel 82543 controller chip

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %I82543-3-UNAVAILABLE: Interface %s has an unsupported PHY 

Explanation    The specified interface has an unsupported PHY chip on the board

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

IBM2692-1

Error Message    %IBM2692-1-UNAVAILABLE: %s %s creation failed 

Explanation    The router or access server could not allocate memory for the descriptors.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message    %IBM2692-1-UNAVAILABLE: Bay %d port adapter requires Rev 2 CPU 

Explanation    The Token Ring PCI Port Adapter driver depends on capabilities of the Revision 2 processor.

Recommended Action    Upgrade the processor to Revision 2.

Error Message    %IBM2692-1-UNAVAILABLE: IBM2692 (%d/%d), LL queue overflow. 

Explanation    A packet buffer queue overflowed. This message indicates a packet was lost, probably due to traffic congestion.

Recommended Action    A small number of queue overflows might not be a cause for concern. Reducing the load on the router or installing a higher-performance router should alleviate this problem.

Error Message    %IBM2692-1-UNAVAILABLE: Only found %d interfaces on bay %d, shutting 
down bay 

Explanation    One of the interface controller devices on the module did not initialize properly.

Recommended Action    Power down, reinsert the network module, and reboot. If the message recurs, call your technical support representative for assistance.

ICE-3

Error Message    %ICE-3-UNAVAILABLE: %s 

Explanation    Error Messages

Recommended Action    try debug command

ICC_ISSU_NEGO Messages

This section contains Inter-Card Communication (ICC) in-service software upgrade (ISSU) negotiation messages.

ICC_ISSU_NEGO-3

Error Message    %ICC_ISSU_NEGO-3-CLIENT_EVENT_QUEUE_CREATE: Failed to create ICC nego 
client queue (client %d, endpoint 0x%x) 

Explanation    The intercard communication (ICC) ISSU negotiation process failed to create a client watched queue.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %ICC_ISSU_NEGO-3-CLIENT_FREE_EVENTS_ALLOCATION: Failed to allocate 
ICC Nego free events (client %d, endpoint 0x%x) 

Explanation    The ICC negotiation process failed to allocate ICC negotiation free events.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %ICC_ISSU_NEGO-3-CLIENT_FREE_EVENT_ENQUEUE: Failed to enqueue event to 
free event queue (type %d, client %d, endpoint 0x%x) 

Explanation    The ICC negotiation process failed to enqueue an event to the free event queue.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %ICC_ISSU_NEGO-3-CLIENT_FREE_EVENT_QUEUE_CREATE: Failed to create ICC 
nego client queue (client %d, endpoint 0x%x) 

Explanation    The ICC negotiation process failed to create a client free events queue.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %ICC_ISSU_NEGO-3-CLIENT_PROCESS_CREATE: Failed to create ICC nego 
client process (client %d, endpoint 0x%x) 

Explanation    The ICC negotiation process failed to create a client process.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %ICC_ISSU_NEGO-3-DROPPING_MSG: Dropping message (client %d) 

Explanation    The ICC negotiation process dropped a client message.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %ICC_ISSU_NEGO-3-ICC_INIT_SEND: Failed to send the ICC Nego Init 
message (endpoint 0x%x) 

Explanation    The ICC negotiation process failed to send the negotiation initialization message.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %ICC_ISSU_NEGO-3-INCONSISTENT_MEDMAN_DATA: Inconsistent MEDMan data 
(unique key %d) 

Explanation    The ICC negotiation process Multiple Endpoint Data Manager (MEDMan) data is inconsistent.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %ICC_ISSU_NEGO-3-INTERNAL_ICC_PAK: Failed to get an ICC pak (internal 
message %d, size %d 

Explanation    The ICC negotiation process failed to get an ICC packet for an internal message.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %ICC_ISSU_NEGO-3-INVALID_CLIENT: Invalid client %d 

Explanation    The ICC negotiation client is invalid.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %ICC_ISSU_NEGO-3-INVALID_CLIENT_PID_GENERIC: Invalid client process 
pid, can't be the generic process (client %d, endpoint 0x%x, pid %d) 

Explanation    An attempt was made to send a client process message to the ICC negotiation generic process.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %ICC_ISSU_NEGO-3-INVALID_DS: Invalid ICC Nego data structure 

Explanation    The internal ICC negotiation data structure is invalid.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %ICC_ISSU_NEGO-3-INVALID_DS_CLIENT: Invalid ICC Nego data structure 
(client %d) 

Explanation    The internal ICC negotiation data structure is invalid.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %ICC_ISSU_NEGO-3-INVALID_MSG: Invalid message (type %d) 

Explanation    The ICC negotiation message is invalid.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %ICC_ISSU_NEGO-3-INVALID_PCOL_DS: Invalid ICC Nego process collector 
data structure (client %d, endpoint 0x%x) 

Explanation    The ICC negotiation process collector data structure is invalid.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %ICC_ISSU_NEGO-3-INVALID_QUEUE: Invalid ICC Nego client queue (client 
%d) 

Explanation    The internal ICC negotiation watched queue is invalid.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %ICC_ISSU_NEGO-3-INVALID_STATUS: Invalid client negotiation status 
(client %d, status %s) 

Explanation    The ICC negotiation client negotiation status is invalid.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %ICC_ISSU_NEGO-3-MEDMAN_DS_CREATION: Failed to create the client data 
structure in MEDMan (client %d, endpoint 0x%x, error %s) 

Explanation    The ICC negotiation process could not create the client data structure in the Multiple Endpoint Data Manager (MEDMan).

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %ICC_ISSU_NEGO-3-MEDMAN_REGISTRATION: Failed to register with MEDMan 

Explanation    The ICC negotiation process failed to register with the Multiple Endpoint Data Manager (MEDMan).

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %ICC_ISSU_NEGO-3-MSG_ENQUEUING: Failed to enqueue msg to the ICC Nego 
generic process (client %d) 

Explanation    The ICC negotiation process failed to enqueue a process message to the ICC negotiation generic process.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %ICC_ISSU_NEGO-3-MSG_ENQUEUING_CLIENT: Failed to enqueue msg to the 
ICC Nego generic process (client %d, e_id 0x%x, type %d) 

Explanation    The ICC negotiation process failed to enqueue a process message to an ICC negotiation client process.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %ICC_ISSU_NEGO-3-NEGO_CANNOT_COMPLETE: Negotiation cannot complete 
(endpoint 0x%x) 

Explanation    The ICC negotiation cannot complete.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %ICC_ISSU_NEGO-3-NOTIFY_CLIENT: Failed to notify client %d (e_id 0x%x) 

Explanation    The ICC negotiation process failed to notify a client.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %ICC_ISSU_NEGO-3-NO_FREE_EVENT: Couldn't get a free event (type %d, 
client %d, e_id 0x%x) 

Explanation    The ICC negotiation process failed to get a free event for a client.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %ICC_ISSU_NEGO-3-NO_INTERNAL_CB: No callback for internal message %d 

Explanation    No ICC negotiation callback has been defined for this internal message.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %ICC_ISSU_NEGO-3-NO_QUEUE: Couldn't get an event queue (type %d, 
client %d, e_id 0x%x) 

Explanation    The ICC negotiation process failed to get an event queue for a client.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %ICC_ISSU_NEGO-3-NO_UK: Couldn't retreive the unique key 

Explanation    The ICC negotiation process failed to retrieve the unique key for a client endpoint pair.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %ICC_ISSU_NEGO-3-NVI_EMPTY_MSG: Received an empty NVI ICC message 

Explanation    The ICC negotiation process received an empty NVI ICC message.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %ICC_ISSU_NEGO-3-NVI_ICC_SEND: Failed to send the ICC Nego NVI ICC 
message (endpoint 0x%x) 

Explanation    The ICC negotiation process failed to send the NVI ICC message.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %ICC_ISSU_NEGO-3-NVI_REQ_PAK: Failed to get an ICC req pak for the ICC 
Nego NVI message 

Explanation    The ICC negotiation process failed to get an ICC request packet for the NVI internal message.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %ICC_ISSU_NEGO-3-NVI_RESP_PAK: Failed to get an ICC resp pak for the 
ICC Nego NVI message 

Explanation    The ICC negotiation process failed to get an ICC response packet for the NVI internal message.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %ICC_ISSU_NEGO-3-OPEN_PORT_RELIABLE: Can't open reliable port 
(endpoint 0x%x, client %s - %d) 

Explanation    The ICC negotiation process cannot open a reliable port to the endpoint for the ISSU client. The ISSU client might not be able to negotiate.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %ICC_ISSU_NEGO-3-OPEN_PORT_UNRELIABLE: Can't open unreliable port 
(endpoint 0x%x, client %d) 

Explanation    The ICC negotiation process cannot open an unreliable port to the endpoint for the ISSU client. The ISSU client might not be able to negotiate.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %ICC_ISSU_NEGO-3-OUT_OF_MEMORY: System is running out of memory 

Explanation    There is not enough available memory in the system.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %ICC_ISSU_NEGO-3-PCOL_INCONSISTENT_PID: Inconsistent ICC Nego process 
collector process id (client %d, endpoint 0x%x) 

Explanation    The ICC negotiation process collector process ID is inconsistent.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %ICC_ISSU_NEGO-3-PROCESS_CREATE: Failed to create ICC nego process 

Explanation    The ICC negotiation failed to create a process to handle the messages.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %ICC_ISSU_NEGO-3-PROCESS_KILL_INTERNAL: Internal process kill failed 
(pid %d, process collector pid %d) 

Explanation    The ICC negotiation process failed to terminate an internal process due to an inconsistent process ID.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %ICC_ISSU_NEGO-3-PROC_LEVEL_MSG_GENERIC: Invalid process level 
message in the generic process (client %d, level %d) 

Explanation    The level of messages for the ICC negotiation process is invalid in the generic process.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %ICC_ISSU_NEGO-3-PROC_LEVEL_MSG_INTERRUPT: Invalid process level 
message in the ICC interrupt (client %d, level %d) 

Explanation    The level of messages for the ICC negotiation process is invalid in the ICC interrupt.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %ICC_ISSU_NEGO-3-SEND_UK: Failed to send unique key to process (client 
%d, endpoint 0x%x 

Explanation    The ICC negotiation process failed to send the unique key to the new client process.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %ICC_ISSU_NEGO-3-TIMER_NOT_AWAKE: ICC Nego pcol timer was not awake 
when getting a timer event 

Explanation    The ICC negotiation process collector timer was not awake when receiving a timer event.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %ICC_ISSU_NEGO-3-TIMER_NOT_RUNNING: ICC Nego pcol timer was not 
running when getting a timer event 

Explanation    The ICC negotiation process collector timer was not running when getting a timer event.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %ICC_ISSU_NEGO-3-WATCHED_QUEUE_CREATION: Failed to create the watched 
queue 

Explanation    The ICC negotiation process could not create the watched queue.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

ICC_ISSU_TAGGING Messages

This section contains Inter-Card Communication (ICC) in-service software upgrade (ISSU) tagging messages.

ICC_ISSU_TAGGING-3

Error Message    %ICC_ISSU_TAGGING-3-NOT_XFORM: Untransformed message detected 
(class:%d, request:%d, sender:%x) 

Explanation    During runtime, the intercard communication (ICC) ISSU tagging process detected an untransformed ICC message. This message must be transformed or suspended to support ISSU.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

ICPM Messages

Error Message    %ICPM-3-ALLOC: Cannot alloc %s 

Explanation    An attempt to allocate an ICPM data structure failed because of a low memory condition.

Recommended Action    Reduce other system activitiy to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

IDBINDEX_SYNC-3

Error Message    %IDBINDEX_SYNC-3-IDBINDEX_ASSIGN: Failed to assign an index to IDB 
type %d, for interface 

Explanation    An interface index cannot be allocated for this interface due to an internal software error. This is an unrecoverable error that results in this interface not being usable for traffic.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IDBINDEX_SYNC-3-IDBINDEX_ENTRY_MISMATCH: An interface index 
mismatched its active table entry: 

Explanation    An interface index was found which did not match the active interface descriptor block (IDB) index table entry with the corresponding synchronization key. This condition is due to an internal software error.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IDBINDEX_SYNC-3-IDBINDEX_LINK: Driver for IDB type '%d' changed the 
Identity of interface 

Explanation    The interface index table cannot be updated with the new identity provided for this interface due to an internal software error. The driver might not have deleted the old identity first, or the driver might have accidentally changed the identity.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IDBINDEX_SYNC-3-IDBINDEX_RETRIEVE: Cannot retrieve if-index for this 
interface: 

Explanation    The interface index number was not found in the interface index table for the interface specified in the error message. This condition might have been caused by the interface index number not being properly synchronized by the primary processor card.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IDBINDEX_SYNC-3-INIT_ERR: %s 

Explanation    The interface index synchronization ISSU client has an initialization error.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IDBINDEX_SYNC-3-IPC_ERR: %s: %s. 

Explanation    The interface index synchronization interprocess communication (IPC) session has an error.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IDBINDEX_SYNC-3-ISSU_ERR: %s%s, rc=%d 

Explanation    The interface index synchronization ISSU client has an error.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IDBINDEX_SYNC-3-RF_ERR: %s %d. 

Explanation    An error occurred in the interface index synchronization of the redundancy facility (RF) client.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IDBINDEX_SYNC-3-TRANSFORM: Require IF-Index ISSU transformation 
function %s %s 

Explanation    The interface index synchronization process has identified a missing ISSU transformation function. This condition may lead to misoperation.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IDBINDEX_SYNC-3-VALIDATE: Cannot validate if-index for this 
interface: 

Explanation    The identity of this interface could not be validated against the stored identity within the interface descriptor block (IDB) index table. This condition probably occurred due to the identity of the IDB changing without first explicitly unlinking the previous identity.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

IDBINDEX_SYNC-4

Error Message    %IDBINDEX_SYNC-4-RESERVE: Failed to lookup existing ifindex for an 
interface on the Standby, allocating a new ifindex from the Active (ifindex=%d, 
idbtype=%s) 

Explanation    A lookup failure occurred for an interface on the standby unit. An attempt was made to resolve the issue by reserving a new interface index on the active unit. If this failure was caused by a defect in the key encoding, then traffic may stop on this interface if the system switches over.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IDBINDEX_SYNC-4-TRUNCATE: Overflow in %s when encoding interface sync 
key, got %d maximum is %d 

Explanation    During the creation of a unique synchronization key to represent an interface, one of the attributes making up the key was truncated to fit in the allocated space in the key. This condition might lead to overlapping key allocations, which would cause an error.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

IDBINDEX_SYNC_KEY Messages

This section contains Interface Descriptor Block (IDB) key synchronizationmessages.

IDBINDEX_SYNC_KEY-3

Error Message    %IDBINDEX_SYNC_KEY-3-UNKNOWN_TYPE: Interface type is unknown and 
cannot be synced: 

Explanation    An internal software error has occurred related to the interface descriptor block (IDB) key synchronization.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

IDBMAN-3

Error Message    %IDBMAN-3-AGGPORTMISMATCH: %s: %s(%d / %d) does match internal 
slot/port state %s(%d / %d) 

Explanation    There is an internal error that caused an invalid aggregate port to be used by the software.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IDBMAN-3-DELETEDAGGPORT: %s(%d / %d) Group %d has been deleted, but 
is being reused. 

Explanation    There is an internal error that caused an interface that has been deleted to be reused for a new aggregate port.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IDBMAN-3-INVALIDAGGPORTBANDWIDTH: %s(%d / %d) has an invalid 
bandwidth value of %d 

Explanation    There is an internal error that caused an invalid bandwidth to be used for an aggregate port.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IDBMAN-3-INVALIDPORT: %s: trying to use invalid port number %d ( Max 
%d ) 

Explanation    There is an internal error that caused an invalid port numer to be used by the software.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IDBMAN-3-INVALIDVLAN: %s: trying to use invalid Vlan %d 

Explanation    There is an internal error that caused an invalid Vlan to be used by the software.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IDBMAN-3-NOTANAGGPORT: %s( %d / %d ) is not an aggregate port 

Explanation    There is an internal error that caused an interface that is not an aggregate port to be used for aggregate port operations

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IDBMAN-3-PORTNOTINAGGPORT: %s(%d / %d) is not present in Aggport %s(%d 
/ %d) 

Explanation    There is an internal error that caused an invalid port to be referred to be part of an aggregate port.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IDBMAN-3-UNAVAILABLE: %s( %d / %d ) is not an aggregate port 

Explanation    There is an internal error that caused an interface that is not an aggregate port to be used for aggregate port operations

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IDBMAN-3-UNAVAILABLE: %s(%d / %d) Group %d has been deleted, but is 
being reused. 

Explanation    There is an internal error that caused an interface that has been deleted to be reused for a new aggregate port.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IDBMAN-3-UNAVAILABLE: %s(%d / %d) has an invalid bandwidth value of %d 

Explanation    There is an internal error that caused an invalid bandwidth to be used for an aggregate port.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IDBMAN-3-UNAVAILABLE: %s(%d / %d) is not present in Aggport %s(%d / 
%d) 

Explanation    There is an internal error that caused an invalid port to be referred to be part of an aggregate port.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IDBMAN-3-UNAVAILABLE: %s: %s(%d / %d) does match internal slot/port 
state %s(%d / %d) 

Explanation    There is an internal error that caused an invalid aggregate port to be used by the software.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IDBMAN-3-UNAVAILABLE: %s: Vlan %d is in use by %s 

Explanation    Each L3 interface has a Vlan associated with it. This message indicates that the Vlan associated with the interface is being used by some other L3 Interface, which is not anticipated to happen

Recommended Action    This is an informational message only, no action is required.

Error Message    %IDBMAN-3-UNAVAILABLE: %s: Vlan %d not set since it already has Vlan %d 

Explanation    There is an internal error that caused an interface to not have its Vlan set to the requested value

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IDBMAN-3-UNAVAILABLE: %s: trying to use invalid Vlan %d 

Explanation    There is an internal error that caused an invalid Vlan to be used by the software.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IDBMAN-3-UNAVAILABLE: %s: trying to use invalid port number %d ( Max 
%d ) 

Explanation    There is an internal error that caused an invalid port numer to be used by the software.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IDBMAN-3-VLANINUSE: %s: Vlan %d is in use by %s 

Explanation    Each L3 interface has a Vlan associated with it. This message indicates that the Vlan associated with the interface is being used by some other L3 Interface, which is not anticipated to happen

Recommended Action    The standby supervisor engine is reloaded automatically to recover from the problem. If the standby supervisor engine does not recover, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IDBMAN-3-VLANNOTSET: %s: Vlan %d not set since it already has Vlan %d 

Explanation    There is an internal error that caused an interface to not have its Vlan set to the requested value

Recommended Action    The standby supervisor engine is reloaded automatically to recover from the problem. If the standby supervisor engine does not recover, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

IDBMAN Messages

This section contains Interface Descriptor Block Manager (IDBMAN) messages.

IDBMAN-4

Error Message    %IDBMAN-4-ACTIVEPORTSINAGGPORT: %s( %d / %d ) has %d active ports, but 
is being removed 

Explanation    There is an internal error that caused an aggregate port with active ports to be removed

Recommended Action    The standby supervisor engine is reloaded automatically to recover from the problem. If the standby supervisor engine does not recover, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IDBMAN-4-CONFIG_WRITE_FAIL: FFailed to generate configuration for 
interface [chars] 

Explanation    The system failed to generate a configuration for the specified interface because of a problem with the file system. The active and standby supervisor engines will have configurations that do not match.

Recommended Action    The standby supervisor engine is reloaded automatically to recover from the problem. If the standby supervisor engine does not recover, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IDBMAN-4-IDB_LIMIT: Maxinum interface count reached the limit of 
[dec]([dec]+[dec]). Module is disabled. 

Explanation    The number of interfaces has reached the maximum limit and the module has been disabled.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

IDBMAN-6

Error Message    %IDBMAN-6-UNAVAILABLE: Vlan %d is mapped to %s 

Explanation    Informational message indicating that the given Vlan is mapped to the given interface

Recommended Action    No action is required.

Error Message    %IDBMAN-6-VLANMAPPED: Vlan %d is mapped to %s 

Explanation    Informational message indicating that the given Vlan is mapped to the given interface

Recommended Action    No action is required.

IDB_IDENTITY-3

Error Message    %IDB_IDENTITY-3-UNAVAILABLE: Memory allocation failure for HWIDB type 
%d 

Explanation    A memory allocation failure occured when trying to allocate the identity for this HWIDB. This HWIDB will not be allocated an IF Index which will prevent it from being used for forwarding data.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

IDMGR Messages

This section contains ID manager messages.

IDMGR-3

Error Message    %IDMGR-3-UNAVAILABLE: %s 

Explanation    A malloc failure occured in ID Manager.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IDMGR-3-UNAVAILABLE: %s 

Explanation    An id_get attempted at interrupt level.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IDMGR-3-UNAVAILABLE: bad id in %s (id: 0x%llX) 

Explanation    An ID Manager error occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IDMGR-3-UNAVAILABLE: bad new ID table size 

Explanation    A bad new table request to ID Manager occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

IDPROM-3

Error Message    %IDPROM-3-UNAVAILABLE: Corrupt or missing IDPROM Checksum 

Explanation    This message indicates the IDPROM of this unit could not be accessed or was found to be corrupt, either due to a hardware problem or manufacturing problem.

Recommended Action    Report this error to your technical support representative.

IDPROM-4

Error Message    %IDPROM-4-UNAVAILABLE: Corrupt or missing IDPROM Magic number 

Explanation    This message indicates the IDPROM of this unit could not be accessed or was found to be corrupt, either due to a hardware problem or manufacturing problem.

Recommended Action    Report this error to your technical support representative.

IDS-4

Error Message    %IDS-4-ICMP_ECHO_REPLY_SIG: Sig:2000:ICMP Echo Reply - from %i to %i 

Explanation    Triggers when a IP datagram is received with the ''protocol'' field of the IP header set to 1 (ICMP) and the ''type'' field in the ICMP header set to 0 (Echo Reply).

Recommended Action    This is extremely common network traffic. Suspicion should be
aised when a large number of these packets are found on the network. If no legitimate reason for this traffic can be identified, prudent security practices would suggest that the source be shunned.

Error Message    %IDS-4-ICMP_ECHO_REPLY_SIG: Sig:2000:ICMP Echo Reply - from %i to %i 

Explanation    Triggers when a IP datagram is received with the ''protocol'' field of the IP header set to 1 (ICMP) and the ''type'' field in the ICMP header set to 0 (Echo Reply).

Recommended Action    This is extremely common network traffic. Suspicion should beraised when a large number of these packets are found on the network. If nolegitimate reason for this traffic can be identified, prudent securitypractices would suggest that the source be shunned.

Error Message    %IDS-4-ICMP_ECHO_SIG: Sig:2004:ICMP Echo Request - from %i to %i 

Explanation    Triggers when a IP datagram is received with the ''protocol'' field of the IP header set to 1 (ICMP) and the ''type'' field in the ICMP header set to 8 (Echo Request). Commonly used to perform reconnaissance sweeps. Suspicion should be raised when a large number of these packets are found on the network.

Recommended Action    The ICMP Echo Request is issued by the source to determine if the destination is ''alive''. When the destination receives the request it will reply with an ICMP Echo Reply. This request/reply pair is most commonly implemented via the ''ping'' utility. Many network management tools use this utility or some derivative. This is extremely common network raffic. Suspicion should be raised when a large number of these packets are found on the network. If no legitimate reason for this traffic can be identified, prudent security practices would suggest that the source be shunned.

Error Message    %IDS-4-ICMP_FRAGMENT_SIG: Sig:2150:Fragmented ICMP Traffic - from %i 
to %i 

Explanation    Triggers when a IP datagram is received with the protocol field of the IP header set to 1 (ICMP) and either the more fragments flag is set to 1 (ICMP) or there is an offset indicated in the offset field.

Recommended Action    IP datagrams may be fragmented normally as they are ransported across the network, but ICMP is rarely fragmented. The traffic should be investigated. If no legitimate reason for the fragmentation can be found and especially if the packets seem to be originating from a single source, prudent security practices would suggest that the host be shunned.

Error Message    %IDS-4-ICMP_INFO_REPLY_SIG: Sig:2010:ICMP Information Reply - from %i 
to %i 

Explanation    Triggers when a IP datagram is received with the ''protocol'' field of the IP header set to 1 (ICMP) and the ''type'' field in the ICMP header set to 16 (ICMP Information Reply). No known exploit exists.

Recommended Action    This datagram type is obsolete and should not be encountered. When non-specific network traffic of this type is encountered, he most prudent action from a security perspective is to shun or disallow it. If the source of this traffic is legitimate the user will then identify
im or herself.

Error Message    %IDS-4-ICMP_INFO_REPLY_SIG: Sig:2010:ICMP Information Reply - from %i 
to %i 

Explanation    Triggers when a IP datagram is received with the ''protocol'' field of the IP header set to 1 (ICMP) and the ''type'' field in the ICMP header set to 16 (ICMP Information Reply). No known exploit exists.

Recommended Action    This datagram type is obsolete and should not beencountered. When non-specific network traffic of this type is encountered,the most prudent action from a security perspective is to shun or disallowit. If the source of this traffic is legitimate the user will then identifyhim or herself.

Error Message    %IDS-4-ICMP_INFO_SIG: Sig:2009:ICMP Information Request - from %i to 
%i 

Explanation    Triggers when a IP datagram is received with the ''protocol'' field of the IP header set to 1 (ICMP) and the ''type'' field in the ICMP header set to 15 (Information Request).

Recommended Action    This datagram type is obsolete and should not be encountered. When non-specific network traffic of this type is encountered, he most prudent action from a security perspective is to shun or disallow it. If the source of this traffic is legitimate the user will then identify
im or herself.

Error Message    %IDS-4-ICMP_INFO_SIG: Sig:2009:ICMP Information Request - from %i to 
%i 

Explanation    Triggers when a IP datagram is received with the ''protocol'' field of the IP header set to 1 (ICMP) and the ''type'' field in the ICMP header set to 15 (Information Request).

Recommended Action    This datagram type is obsolete and should not beencountered. When non-specific network traffic of this type is encountered,the most prudent action from a security perspective is to shun or disallowit. If the source of this traffic is legitimate the user will then identifyhim or herself.

Error Message    %IDS-4-ICMP_MASK_REPLY_SIG: Sig:2012:ICMP Address Mask Reply - from %i 
to %i 

Explanation    Triggers when a IP datagram is received with the ''protocol'' field of the IP header set to 1 (ICMP) and the ''type'' field in the ICMP header set to 18 (Address Mask Reply). No known exploits incorporate this option.

Recommended Action    The ICMP Address Mask Request/Reply pair can be used to determine the sublet mask used on the network. The requesting system issues he Address Mask Request bound for a destination, the destination system
esponds with an Address Mask Reply message. This is normal network traffic, but is uncommon on most networks. Suspicion should be raised when a large umber of these packets are found on the network. If no legitimate reason for this traffic can be identified prudent security practices would suggest hat the source be shunned.

Error Message    %IDS-4-ICMP_MASK_REPLY_SIG: Sig:2012:ICMP Address Mask Reply - from %i 
to %i 

Explanation    Triggers when a IP datagram is received with the ''protocol'' field of the IP header set to 1 (ICMP) and the ''type'' field in the ICMP header set to 18 (Address Mask Reply). No known exploits incorporate this option.

Recommended Action    The ICMP Address Mask Request/Reply pair can be used todetermine the sublet mask used on the network. The requesting system issuesthe Address Mask Request bound for a destination, the destination systemresponds with an Address Mask Reply message. This is normal network traffic,but is uncommon on most networks. Suspicion should be raised when a largenumber of these packets are found on the network. If no legitimate reasonfor this traffic can be identified prudent security practices would suggestthat the source be shunned.

Error Message    %IDS-4-ICMP_MASK_SIG: Sig:2011:ICMP Address Mask Request - from %i to 
%i 

Explanation    Triggers when a IP datagram is received with the ''protocol'' field of the IP header set to 1 (ICMP) and the ''type'' field in the ICMP header set to 17 (Address Mask Request). ICMP Address Mask Requests could be used to perform reconnaissance sweeps of networks.

Recommended Action    The ICMP Address Mask Request/Reply pair can be used to determine the subnet mask used on the network. The requesting system issues he Address Mask Request bound for a destination, the destination system
esponds with an Address Mask Reply message. This is normal network traffic, but is uncommon on most networks. Suspicion should be raised when a large umber of these packets are found on the network. If no legitimate reason for this traffic can be identified prudent security practices would suggest hat the source be shunned.

Error Message    %IDS-4-ICMP_MASK_SIG: Sig:2011:ICMP Address Mask Request - from %i to 
%i 

Explanation    Triggers when a IP datagram is received with the ''protocol'' field of the IP header set to 1 (ICMP) and the ''type'' field in the ICMP header set to 17 (Address Mask Request). ICMP Address Mask Requests could be used to perform reconnaissance sweeps of networks.

Recommended Action    The ICMP Address Mask Request/Reply pair can be used todetermine the subnet mask used on the network. The requesting system issuesthe Address Mask Request bound for a destination, the destination systemresponds with an Address Mask Reply message. This is normal network traffic,but is uncommon on most networks. Suspicion should be raised when a largenumber of these packets are found on the network. If no legitimate reasonfor this traffic can be identified prudent security practices would suggestthat the source be shunned.

Error Message    %IDS-4-ICMP_PARAMPROB_SIG: Sig:2006:ICMP Parameter Problem on Datagram 
- from %i to %i 

Explanation    Triggers when a IP datagram is received with the ''protocol'' field of the IP header set to 1 (ICMP) and the ''type'' field in the ICMP header set to 12 (Parameter Problem on Datagram). No known exploits incorporate this option.

Recommended Action    ICMP Parameter Problem datagrams are issued when a router
as had to drop a datagram because it was malformed. This is a normal and ecessary type of network traffic. Large numbers of this datagram type on he network are indicative of network difficulties or may be indicative of
ostile actions. If no network problems can be identified to account for the raffic prudent security practices would suggest that the source be shunned.

Error Message    %IDS-4-ICMP_PARAMPROB_SIG: Sig:2006:ICMP Parameter Problem on Datagram 
- from %i to %i 

Explanation    Triggers when a IP datagram is received with the ''protocol'' field of the IP header set to 1 (ICMP) and the ''type'' field in the ICMP header set to 12 (Parameter Problem on Datagram). No known exploits incorporate this option.

Recommended Action    ICMP Parameter Problem datagrams are issued when a routerhas had to drop a datagram because it was malformed. This is a normal andnecessary type of network traffic. Large numbers of this datagram type onthe network are indicative of network difficulties or may be indicative ofhostile actions. If no network problems can be identified to account for thetraffic prudent security practices would suggest that the source be shunned.

Error Message    %IDS-4-ICMP_PING_OF_DEATH_SIG: Sig:2154:ICMP Ping of Death Attack - 
from %i to %i 

Explanation    Triggers when a IP datagram is received with the protocol field of the IP header set to 1(ICMP), the Last Fragment bit is set, and ( IP offset * 8 ) + ( IP data length) 65535 that is to say, the IP offset (which represents the starting position of this fragment in the original packet, and which is in 8 byte units) plus the rest of the packet is greater than the maximum size for an IP packet. This indicates a denial of service attack.

Recommended Action    This indicates a denial of service attack. It is likely that the source address has been spoofed making shunning ineffective

Error Message    %IDS-4-ICMP_PING_OF_DEATH_SIG: Sig:2154:ICMP Ping of Death Attack - 
from %i to %i 

Explanation    Triggers when a IP datagram is received with the protocol field of the IP header set to 1(ICMP), the Last Fragment bit is set, and ( IP offset * 8 ) + ( IP data length) 65535 that is to say, the IP offset (which represents the starting position of this fragment in the original packet, and which is in 8 byte units) plus the rest of the packet isgreater than the maximum size for an IP packet. This indicates a denial of service attack.

Recommended Action    This indicates a denial of service attack. It is likely that the sourceaddress has been spoofed making shunning ineffective

Error Message    %IDS-4-ICMP_REDIRECT_SIG: Sig:2003:ICMP Redirect - from %i to %i 

Explanation    Triggers when a IP datagram is received with the ''protocol'' field of the IP header set to 1 (ICMP) and the ''type'' field in the ICMP header set to 5 (Redirect).

Recommended Action    The redirect message may be issued from a router to inform a host of a better route to a requested destination. The host then updates its routing table to include this route. This method of updating routing ables is an uncommon practice today. When non-specific network traffic of his type is encountered, the most prudent action from a security perspective is to shun or disallow it. If the source of this traffic is legitimate the user will then identify him or herself.

Error Message    %IDS-4-ICMP_REDIRECT_SIG: Sig:2003:ICMP Redirect - from %i to %i 

Explanation    Triggers when a IP datagram is received with the ''protocol'' field of the IP header set to 1 (ICMP) and the ''type'' field in the ICMP header set to 5 (Redirect).

Recommended Action    The redirect message may be issued from a router to informa host of a better route to a requested destination. The host then updatesits routing table to include this route. This method of updating routingtables is an uncommon practice today. When non-specific network traffic ofthis type is encountered, the most prudent action from a securityperspective is to shun or disallow it. If the source of this traffic islegitimate the user will then identify him or herself.

Error Message    %IDS-4-ICMP_SOURCEQUENCH_SIG: Sig:2002:ICMP Source Quench - from %i to 
%i 

Explanation    Triggers when an IP datagram is received with the ''protocol'' field of the IP header set to 1 (ICMP) and the ''type'' field in the ICMP header set to 4 (Source Quench). This datagram may be used in network management to provide congestion control. Large numbers of this datagram type on the network are indicative of network difficulties or may be indicative of hostile actions.

Recommended Action    This datagram may be used in network management to provide congestion control. A source quench packet will be issued when a router is beginning to lose packets due to the transmission rate of a source. The source quench is a request to the source to reduce the rate of datagram ransmission. This datagram type is rarely if ever seen on networks and some systems do not even support it. Large numbers of this datagram type on the etwork are indicative of network difficulties or may be indicative of
ostile actions. If no network problems can be identified to account for the raffic prudent security practices would suggest that the source be shunned.

Error Message    %IDS-4-ICMP_SOURCEQUENCH_SIG: Sig:2002:ICMP Source Quench - from %i to 
%i 

Explanation    Triggers when an IP datagram is received with the ''protocol'' field of the IP header set to 1 (ICMP) and the ''type'' field in the ICMP header set to 4 (Source Quench). This datagram may be used in network management to provide congestion control. Large numbers of this datagram type on the network are indicative of network difficulties or may be indicative of hostile actions.

Recommended Action    This datagram may be used in network management to providecongestion control. A source quench packet will be issued when a router isbeginning to lose packets due to the transmission rate of a source. Thesource quench is a request to the source to reduce the rate of datagramtransmission. This datagram type is rarely if ever seen on networks and somesystems do not even support it. Large numbers of this datagram type on thenetwork are indicative of network difficulties or may be indicative ofhostile actions. If no network problems can be identified to account for thetraffic prudent security practices would suggest that the source be shunned.

Error Message    %IDS-4-ICMP_TIME_REPLY_SIG: Sig:2008:ICMP Timestamp Reply - from %i to 
%i 

Explanation    Triggers when a IP datagram is received with the ''protocol'' field of the IP header set to 1 (ICMP) and the type field in the ICMP header set to 14 (Timestamp Reply). No known exploits incorporate this option.

Recommended Action    The ICMP Timestamp Request/Reply pair can be used to synchronize system clocks on the network. The requesting system issues the Timestamp Request bound for a destination, the destination system responds with a Timestamp Reply message. This is normal network traffic, but is uncommon on most networks. Suspicion should be raised when a large number of hese packets are found on the network. If no legitimate reason for this raffic can be identified prudent security practices would suggest that the source be shunned.

Error Message    %IDS-4-ICMP_TIME_SIG: Sig:2007:ICMP Timestamp Request - from %i to %i 

Explanation    Triggers when a IP datagram is received with the ''protocol'' field of the IP header set to 1 (ICMP) and the ''type'' field in the ICMP header set to 13 (Timestamp Request). ICMP Timestamp Requests could be used to perform reconnaissance sweeps of networks. No known exploits incorporate this option.

Recommended Action    The ICMP Timestamp Request/Reply pair can be used to synchronize system clocks on the network. The requesting system issues the Timestamp Request bound for a destination, the destination system responds with a Timestamp Reply message. This is normal network traffic, but is uncommon on most networks. Suspicion should be raised when a large number of hese packets are found on the network. If no legitimate reason for this raffic can be identified prudent security practices would suggest that the source be shunned.

Error Message    %IDS-4-ICMP_TIMXCEED_SIG: Sig:2005:ICMP Time Exceeded for a Datagram 
- from %i to %i 

Explanation    Triggers when a IP datagram is received with the ''protocol'' field of the IP header set to 1 (ICMP) and the ''type'' field in the ICMP header set to 11(Time Exceeded for a Datagram). No known exploits incorporate this option.

Recommended Action    ICMP Time Exceeded datagrams are issued when a router has
ad to drop a datagram whose Time to Live (TTL) flag has expired. This is a ormal and necessary type of network traffic. Large numbers of this datagram ype on the network are indicative of network difficulties or may be indicative of hostile actions. If no network problems can be identified to account for the traffic prudent security practices would suggest that the source be shunned.

Error Message    %IDS-4-ICMP_TIMXCEED_SIG: Sig:2005:ICMP Time Exceeded for a Datagram 
- from %i to %i 

Explanation    Triggers when a IP datagram is received with the ''protocol'' field of the IP header set to 1 (ICMP) and the ''type'' field in the ICMP header set to 11(Time Exceeded for a Datagram). No known exploits incorporate this option.

Recommended Action    ICMP Time Exceeded datagrams are issued when a router hashad to drop a datagram whose Time to Live (TTL) flag has expired. This is anormal and necessary type of network traffic. Large numbers of this datagramtype on the network are indicative of network difficulties or may beindicative of hostile actions. If no network problems can be identified toaccount for the traffic prudent security practices would suggest that thesource be shunned.

Error Message    %IDS-4-ICMP_TOOLARGE_SIG: Sig:2151:Large ICMP Traffic - from %i to %i 

Explanation    While it is possible to receive ICMP datagrams that have a size greater than 1024 bytes, this is a highly unusual occurrence that warrants investigation.

Recommended Action    While it is possible to receive ICMP datagrams that have a size greater than 1024 bytes, this is a highly unusual occurrence that warrants investigation. If no legitimate reason for the large packet size can be found and especially if the packets seem to be originating from a single source, prudent security practices would suggest that the host be shunned.

Error Message    %IDS-4-ICMP_TOOLARGE_SIG: Sig:2151:Large ICMP Traffic - from %i to %i 

Explanation    While it is possible to receive ICMP datagrams that have a size greater than 1024 bytes, this is a highly unusual occurrence that warrants investigation.

Recommended Action    While it is possible to receive ICMP datagrams that have asize greater than 1024 bytes, this is a highly unusual occurrence thatwarrants investigation. If no legitimate reason for the large packet sizecan be found and especially if the packets seem to be originating from asingle source, prudent security practices would suggest that the host beshunned.

Error Message    %IDS-4-ICMP_UNREACH_SIG: Sig:2001:ICMP Host Unreachable - from %i to 
%i 

Explanation    Triggers when an IP datagram is received with the ''protocol'' field of the IP header set to 1 (ICMP) and the ''type'' field in the ICMP header set to 3 (Host Unreachable). This is the common responseLarge numbers of this datagram type on the network are indicative of network difficulties or may be indicative of hostile actions.

Recommended Action    This is the common response provided to a client when there is no path available to the requested host. This is a very common type of etwork traffic. Large numbers of this datagram type on the network are indicative of network difficulties or may be indicative of hostile actions. If no network problems can be identified to account for the traffic prudent security practices would suggest that the source be shunned.

Error Message    %IDS-4-IPFRAG_ATTACK_SIG: Sig:1100:IP Fragment Attack - from %i to %i 

Explanation    Triggers when any IP datagram is received with the 'more fragments' flag set to 1 or if there is an offset indicated in the offset field.

Recommended Action    IP datagrams may be fragmented normally as they are transported across the network. This is not uncommon, but is unusual enough that the traffic should be investigated. This is especially important if the network is protected by a packet filtering firewall.

Error Message    %IDS-4-IPOPTS_BAD_SIG: Sig:1000:Bad IP Option List - from %i to %i 

Explanation    Triggers on receipt of an IP datagram where the list of IP options in the IP datagram header is incomplete or malformed. No known exploits purposely incorporate this option.

Recommended Action    There is no legitimate use for malformed datagrams. This may be indicative of systems that are experiencing problems with their kernel or NIC cards. This is unusual traffic and warrants investigation. When non-specific network traffic of this ype is encountered, the most prudent action from a security perspective is to shun or disallow it. If the source of this traffic is legitimate he user will then identify him or herself.

Error Message    %IDS-4-IPOPT_LSRR_SIG: Sig:1004:IP options-Loose Source Route - from 
%i to %i 

Explanation    Triggers on receipt of an IP datagram where the IP option list for the datagram includes option 3 (Loose Source Route). This option may be misused to defeat authentication mechanisms that rely on IP addresses as their basis for trust relationships.

Recommended Action    While network troubleshooting may require the legitimate use of this feature, this type of traffic is rarely if ever oted and should comprise much less than 1% of network traffic. Small amounts of source routed traffic most probably indicates that a etwork problem is being investigated. Large amounts of source
outed traffic is more suspicious and a thorough investigation of the source and reason is indicated.

Error Message    %IDS-4-IPOPT_RR_SIG: Sig:1001:IP options-Record Packet Route - from %i 
to %i 

Explanation    The IP options list contains one or more options that perform various network management or debugging tasks. This alarm may indicate a reconnaissance attack is in progress against your network.

Recommended Action    While network troubleshooting may require he legitimate use of this feature, this is unusual traffic that warrants investigation. When non-specific network traffic of this type is encountered, the most prudent action from a security perspective is o shun or disallow it. If the source of this traffic is legitimate he user will then identify him or herself.

Error Message    %IDS-4-IPOPT_RR_SIG: Sig:1001:IP options-Record Packet Route - from %i 
to %i 

Explanation    The IP options list contains one or more options that perform various network management or debugging tasks. This alarm may indicate a reconnaissance attack is in progress against your network.

Recommended Action    While network troubleshooting may require the legitimate use of this feature, this is unusual traffic that warrantsinvestigation. When non-specific network traffic of this type is encountered, the most prudent action from a security perspective is to shun or disallow it. If the source of this traffic is legitimate the user will then identify him or herself.

Error Message    %IDS-4-IPOPT_SATID_SIG: Sig:1005:IP options-SATNET ID - from %i to %i 

Explanation    Triggers on receipt of an IP datagram where the IP option list for the datagram includes option 8 (SATNET stream identifier). No known exploit exists.

Recommended Action    This option is obsolete and should not be encountered. When on-specific network traffic of this type is encountered, the most prudent action from a security perspective is to shun or disallow it. If the source of this traffic is legitimate the user will then identify him or herself.

Error Message    %IDS-4-IPOPT_SECURITY_SIG: Sig:1003:IP options-Provide s,c,h,tcc - 
from %i to %i 

Explanation    Triggers on receipt of an IP datagram where the IP option list for the datagram includes option 2. No known exploit exists.

Recommended Action    This signature will trigger if you have implemented IP security options on your network However, this is
arely, if ever, implemented . When non-specific network traffic of this type is encountered, the most prudent action from a security perspective is to shun or disallow it. If the source of this traffic is legitimate the user will then identify him or herself.

Error Message    %IDS-4-IPOPT_SSRR_SIG: Sig:1006:IP options-Strict Source Route - from 
%i to %i 

Explanation    Triggers on receipt of an IP datagram in which the IP option list for the datagram includes option 2 (Strict Source Routing). This option may be misused to defeat authentication mechanisms that rely on IP addresses as their basis for trust relationships.

Recommended Action    While network troubleshooting may require the legitimate use of this feature, this type of traffic is rarely if ever noted and should comprise much less than 1% of network traffic. Small amounts of source
outed traffic most probably indicates that a network problem is being investigated. Large amounts of source routed traffic is more suspicious and a thorough investigation of the source and reason is indicated.

Error Message    %IDS-4-IPOPT_SSRR_SIG: Sig:1006:IP options-Strict Source Route - from 
%i to %i 

Explanation    Triggers on receipt of an IP datagram in which the IP option list for the datagram includes option 2 (Strict Source Routing). This option may be misused to defeat authentication mechanisms that rely on IP addresses as their basis for trust relationships.

Recommended Action    While network troubleshooting may require the legitimate use of thisfeature, this type of traffic is rarely if ever noted and should comprise much less than 1% of network traffic. Small amounts of source routed traffic most probably indicates that a network problem is being investigated. Large amounts of source routed traffic is more suspicious and a thorough investigation of the source and reason is indicated.

Error Message    %IDS-4-IPOPT_TS_SIG: Sig:1002:IP options-TimeStamp - from %i to %i 

Explanation    Triggers on receipt of an IP datagram where the IP option list for the datagram includes option 4 (Timestamp). This alarm indicates that a reconnaissance attack may be in progress against your network.

Recommended Action    While network troubleshooting may require he legitimate use of this feature, this is unusual traffic that warrants investigation. When non-specific network traffic of this type is encountered, the most prudent action from a security perspective is o shun or disallow it. If the source of this traffic is legitimate he user will then identify him or herself.

Error Message    %IDS-4-IP_IMPOSSIBLE_SIG: Sig:1102:Impossible IP Packet - from %i to 
%i 

Explanation    This triggers when an IP packet arrives with source equal to destination address. This signature will catch the so-called Land Attack.

Recommended Action    This should never occur in legitimate traffic.

Error Message    %IDS-4-IP_UNKNOWN_PROTO_SIG: Sig:1101:Unknown IP Protocol - from %i to 
%i 

Explanation    Triggers when an IP datagram is received with the protocol field set to 101 or greater. The use of these protocol types is highly unusual and should be investigated.

Recommended Action    Locally developed protocols that may use hese protocol types will trigger the signature. The use of these protocol types is highly unusual and should be investigated. When on-specific network traffic of this type is encountered, the most prudent action from a security perspective is to shun or disallow it. If the source of this traffic is legitimate the user will then identify him or herself.

Error Message    %IDS-4-LOST_CONNECT: Connection to HostID:%u OrgID:%u 

Explanation    Triggers when a connection drops and there is no previous connection.

Recommended Action    This message indicates that the IDS cannot communicate with the Director. Check connectivity to the Director and check Postoffice configuration on both the router and the Director.

Error Message    %IDS-4-RPC_CALLIT_REQUEST: Sig:6103:Proxied RPC Request - from %i to 
%i 

Explanation    Triggers when a proxied RPC request is sent to the portmapper of a target host.

Recommended Action    If this procedure is allowed on your network those users hat employ it will trigger the signature. This may be a serious attempt at gaining unauthorized access and if the source of the attempt is not within your network they should be shunned.

Error Message    %IDS-4-RPC_DUMP_REQUEST: Sig:6102:RPC Dump - from %i to %i 

Explanation    Triggers when an RPC dump request isissued to a target host.

Recommended Action    This is a common procedure performed by many system administrators and wary users to determine which RPC services are being offered. Executing this procedure is most likely due to curiosity on the part of a novice user or a system administrator performing system maintenance. If upon investigation no valid user can be associated with this event, prudent security practices would suggest shunning the source.

Error Message    %IDS-4-RPC_DUMP_REQUEST: Sig:6102:RPC Dump - from %i to %i 

Explanation    Triggers when an RPC dump request isissued to a target host.

Recommended Action    This is a common procedure performed by many systemadministrators and wary users to determine which RPC services are beingoffered. Executing this procedure is most likely due to curiosity on thepart of a novice user or a system administrator performing systemmaintenance. If upon investigation no valid user can be associated with thisevent, prudent security practices would suggest shunning the source.

Error Message    %IDS-4-RPC_PORTREQ_MOUNTD: Sig:6155:RPC mountd Portmap Request - from 
%i to %i 

Explanation    Triggers when a request is made to the portmapper for the mount daemon (mountd) port.

Recommended Action    If this procedure is allowed on your network those users hat employ it will trigger the signature. This may be a serious attempt at gaining unauthorized access and if the source of the attempt is not within your network they should be shunned.

Error Message    %IDS-4-RPC_PORTREQ_REXD: Sig:6175: RPC rexd Portmap Request - from %i 
to %i 

Explanation    Triggers when a request is made to the portmapper for the remote execution daemon (rexd) port. The remote execution daemon is the server
esponsible for remote program execution. This may be indicative of an attempt o gain unauthorized access to system resources.

Recommended Action    If this procedure is allowed on your network, those users who employ it will trigger the signature. This may be a serious attempt at gaining unauthorized access and if the source of the attempt is not within your network, it should be shunned.

Error Message    %IDS-4-RPC_PORTREQ_REXD: Sig:6175: RPC rexd Portmap Request - from %i 
to %i 

Explanation    Triggers when a request is made to the portmapper for the remote execution daemon (rexd) port. The remote execution daemon is the serverresponsible for remote program execution. This may be indicative of an attempt to gain unauthorized access to system resources.

Recommended Action    If this procedure is allowed on your network, those userswho employ it will trigger the signature. This may be a serious attempt atgaining unauthorized access and if the source of the attempt is not withinyour network, it should be shunned.

Error Message    %IDS-4-RPC_PORTREQ_YPBIND: Sig:6151:RPC ypbind Portmap Request - from 
%i to %i 

Explanation    Triggers when a request is made to the portmapper for the YP bind daemon (ypbind) port.

Recommended Action    If this procedure is allowed on your network those users hat employ it will trigger the signature. This may be a serious attempt at gaining unauthorized access and if the source of the attempt is not within your network they should be shunned.

Error Message    %IDS-4-RPC_PORTREQ_YPPASSWDD: Sig:6152:RPC ypbind yppasswdd Portmap 
Request - from %i to %i 

Explanation    Triggers when a request is made to the portmapper for the YP password daemon (yppasswdd) port.

Recommended Action    If this procedure is allowed on your network those users hat employ it will trigger the signature. This may be a serious attempt at gaining unauthorized access and if the source of the attempt is not within your network they should be shunned.

Error Message    %IDS-4-RPC_PORTREQ_YPPASSWDD: Sig:6152:RPC ypbind yppasswdd Portmap 
Request - from %i to %i 

Explanation    Triggers when a request is made to the portmapper for the YP password daemon (yppasswdd) port.

Recommended Action    If this procedure is allowed on your network those usersthat employ it will trigger the signature. This may be a serious attempt atgaining unauthorized access and if the source of the attempt is not withinyour network they should be shunned.

Error Message    %IDS-4-RPC_PORTREQ_YPSERV: Sig:6150:RPC ypserv Portmap Request - from 
%i to %i 

Explanation    Triggers when a request is made to the portmapper for the YP server daemon (ypserv) port.

Recommended Action    If this procedure is allowed on your network those users hat employ it will trigger the signature. This may be a serious attempt at gaining unauthorized access and if the source of the attempt is not within your network they should be shunned.

Error Message    %IDS-4-RPC_PORTREQ_YPUPDATED: Sig:6153:RPC ypupdated Portmap Request 
- from %i to %i 

Explanation    Triggers when a request is made to the portmapper for the YP update daemon (ypupdated) port.

Recommended Action    If this procedure is allowed on your network those users hat employ it will trigger the signature. This may be a serious attempt at gaining unauthorized access and if the source of the attempt is not within your network they should be shunned.

Error Message    %IDS-4-RPC_PORTREQ_YPXFRD: Sig:6154:RPC ypxfrd Portmap Request - from 
%i to %i 

Explanation    Triggers when a request is made to the portmapper for the YP transfer daemon (ypxfrd) port.

Recommended Action    If this procedure is allowed on your network those users hat employ it will trigger the signature. This may be a serious attempt at gaining unauthorized access and if the source of the attempt is not within your network they should be shunned.

Error Message    %IDS-4-RPC_REXD_REQUEST: Sig:6180:RPC rexd Attempt - from %i to %i 

Explanation    Triggers when a call to the rexd program is made. The remote execution daemon is the server responsible for remote program execution. This may be indicative of an attempt to gain unauthorized access to system
esources.

Recommended Action    If this service is being used legitimately, this alarm will fire. For security purposes, this service really should not be used.

Error Message    %IDS-4-RPC_REXD_REQUEST: Sig:6180:RPC rexd Attempt - from %i to %i 

Explanation    Triggers when a call to the rexd program is made. The remote execution daemon is the server responsible for remote program execution. Thismay be indicative of an attempt to gain unauthorized access to system resources.

Recommended Action    If this service is being used legitimately, this alarm willfire. For security purposes, this service really should not be used.

Error Message    %IDS-4-RPC_SET_REQUEST: Sig:6100:RPC Port Registration - from %i to %i 

Explanation    Triggers when attempts are made to register new RPC services on a target host.

Recommended Action    No benign triggers exist for this signature. Prudent security practices suggest that the source of this attempt should be shunned.

Error Message    %IDS-4-UNAVAILABLE: Connection to HostID:%u OrgID:%u 

Explanation    Triggers when a connection drops and there is no previous connection.

Recommended Action    This message indicates that the IDS cannot communicate with the Director. Check connectivity to the Director and check Postofficeconfiguration on both the router and the Director.

Error Message    %IDS-4-UNAVAILABLE: Invalid SMTP command - from %i to %i 

Explanation    Triggers on an invalid SMTP command in the SMTP connection. This message indicates that a suspicious violation was detetected that may be an attack to the mail server system.

Recommended Action    This is unusual traffic and may warrant investigation.

Error Message    %IDS-4-UNAVAILABLE: Sig:1000:Bad IP Option List - from %i to %i 

Explanation    Triggers on receipt of an IP datagram where the list of IP options in the IP datagram header is incomplete or malformed. No known exploits purposely incorporate this option.

Recommended Action    There is no legitimate use for malformed datagrams. This may be indicative of systems that are experiencing problems with their kernel or NIC cards. This is unusual traffic and warrants investigation. When non-specific network traffic of this type is encountered, the most prudent action from a security perspective is to shun or disallow it. If the source of this traffic is legitimate the user will then identify him or herself.

Error Message    %IDS-4-UNAVAILABLE: Sig:1001:IP options-Record Packet Route - from %i 
to %i 

Explanation    The IP options list contains one or more options that perform various network management or debugging tasks. This alarm may indicate a reconnaissance attack is in progress against your network.

Recommended Action    While network troubleshooting may require the legitimate use of this feature, this is unusual traffic that warrantsinvestigation. When non-specific network traffic of this type is encountered, the most prudent action from a security perspective is to shun or disallow it. If the source of this traffic is legitimate the user will then identify him or herself.

Error Message    %IDS-4-UNAVAILABLE: Sig:1002:IP options-TimeStamp - from %i to %i 

Explanation    Triggers on receipt of an IP datagram where the IP option list for the datagram includes option 4 (Timestamp). This alarm indicates that a reconnaissance attack may be in progress against your network.

Recommended Action    While network troubleshooting may require the legitimate use of this feature, this is unusual traffic that warrantsinvestigation. When non-specific network traffic of this type is encountered, the most prudent action from a security perspective is to shun or disallow it. If the source of this traffic is legitimate the user will then identify him or herself.

Error Message    %IDS-4-UNAVAILABLE: Sig:1003:IP options-Provide s,c,h,tcc - from %i to 
%i 

Explanation    Triggers on receipt of an IP datagram where the IP option list for the datagram includes option 2. No known exploit exists.

Recommended Action    This signature will trigger if you have implemented IP security options on your network However, this is rarely, if ever, implemented . When non-specific network traffic of this type is encountered, the most prudent action from a security perspective is to shun or disallow it. If the source of this traffic is legitimate the user will then identify him or herself.

Error Message    %IDS-4-UNAVAILABLE: Sig:1004:IP options-Loose Source Route - from %i 
to %i 

Explanation    Triggers on receipt of an IP datagram where the IP option list for the datagram includes option 3 (Loose Source Route). This option may be misused to defeat authentication mechanisms that rely on IP addresses as their basis for trust relationships.

Recommended Action    While network troubleshooting may require the legitimate use of this feature, this type of traffic is rarely if ever noted and should comprise much less than 1% of network traffic. Small amounts of source routed traffic most probably indicates that a network problem is being investigated. Large amounts of source routed traffic is more suspicious and a thorough investigation of the source and reason is indicated.

Error Message    %IDS-4-UNAVAILABLE: Sig:1005:IP options-SATNET ID - from %i to %i 

Explanation    Triggers on receipt of an IP datagram where the IP option list for the datagram includes option 8 (SATNET stream identifier). No known exploit exists.

Recommended Action    This option is obsolete and should not be encountered. Whennon-specific network traffic of this type is encountered, the most prudent action from a security perspective is to shun or disallow it. If the source of this traffic is legitimate the user will then identify him or herself.

Error Message    %IDS-4-UNAVAILABLE: Sig:1006:IP options-Strict Source Route - from %i 
to %i 

Explanation    Triggers on receipt of an IP datagram in which the IP option list for the datagram includes option 2 (Strict Source Routing). This option may be misused to defeat authentication mechanisms that rely on IP addresses as their basis for trust relationships.

Recommended Action    While network troubleshooting may require the legitimate use of thisfeature, this type of traffic is rarely if ever noted and should comprise much less than 1% of network traffic. Small amounts of source routed traffic most probably indicates that a network problem is being investigated. Large amounts of source routed traffic is more suspicious and a thorough investigation of the source and reason is indicated.

Error Message    %IDS-4-UNAVAILABLE: Sig:1100:IP Fragment Attack - from %i to %i 

Explanation    Triggers when any IP datagram is received with the 'more fragments' flag set to 1 or if there is an offset indicated in the offset field.

Recommended Action    IP datagrams may be fragmented normally as theyare transported across the network. This is not uncommon, but is unusual enough that the traffic should be investigated. This is especially important if the network is protected by a packet filtering firewall.

Error Message    %IDS-4-UNAVAILABLE: Sig:1101:Unknown IP Protocol - from %i to %i 

Explanation    Triggers when an IP datagram is received with the protocol field set to 101 or greater. The use of these protocol types is highly unusual and should be investigated.

Recommended Action    Locally developed protocols that may use these protocol types will trigger the signature. The use of these protocol types is highly unusual and should be investigated. When non-specific network traffic of this type is encountered, the most prudent action from a security perspective is to shun or disallow it.If the source of this traffic is legitimate the user will then identify him or herself.

Error Message    %IDS-4-UNAVAILABLE: Sig:1102:Impossible IP Packet - from %i to %i 

Explanation    This triggers when an IP packet arrives with source equal to destination address. This signature will catch the so-called Land Attack.

Recommended Action    This should never occur in legitimate traffic.

Error Message    %IDS-4-UNAVAILABLE: Sig:2000:ICMP Echo Reply - from %i to %i 

Explanation    Triggers when a IP datagram is received with the ''protocol'' field of the IP header set to 1 (ICMP) and the ''type'' field in the ICMP header set to 0 (Echo Reply).

Recommended Action    This is extremely common network traffic. Suspicion should beraised when a large number of these packets are found on the network. If nolegitimate reason for this traffic can be identified, prudent securitypractices would suggest that the source be shunned.

Error Message    %IDS-4-UNAVAILABLE: Sig:2001:ICMP Host Unreachable - from %i to %i 

Explanation    Triggers when an IP datagram is received with the ''protocol'' field of the IP header set to 1 (ICMP) and the ''type'' field in the ICMP header set to 3 (Host Unreachable). This is the common responseLarge numbers of this datagram type on the network are indicative of network difficulties or may be indicative of hostile actions.

Recommended Action    This is the common response provided to a client when thereis no path available to the requested host. This is a very common type ofnetwork traffic. Large numbers of this datagram type on the network areindicative of network difficulties or may be indicative of hostile actions.If no network problems can be identified to account for the traffic prudentsecurity practices would suggest that the source be shunned.

Error Message    %IDS-4-UNAVAILABLE: Sig:2002:ICMP Source Quench - from %i to %i 

Explanation    Triggers when an IP datagram is received with the ''protocol'' field of the IP header set to 1 (ICMP) and the ''type'' field in the ICMP header set to 4 (Source Quench). This datagram may be used in network management to provide congestion control. Large numbers of this datagram type on the network are indicative of network difficulties or may be indicative of hostile actions.

Recommended Action    This datagram may be used in network management to providecongestion control. A source quench packet will be issued when a router isbeginning to lose packets due to the transmission rate of a source. Thesource quench is a request to the source to reduce the rate of datagramtransmission. This datagram type is rarely if ever seen on networks and somesystems do not even support it. Large numbers of this datagram type on thenetwork are indicative of network difficulties or may be indicative ofhostile actions. If no network problems can be identified to account for thetraffic prudent security practices would suggest that the source be shunned.

Error Message    %IDS-4-UNAVAILABLE: Sig:2003:ICMP Redirect - from %i to %i 

Explanation    Triggers when a IP datagram is received with the ''protocol'' field of the IP header set to 1 (ICMP) and the ''type'' field in the ICMP header set to 5 (Redirect).

Recommended Action    The redirect message may be issued from a router to informa host of a better route to a requested destination. The host then updatesits routing table to include this route. This method of updating routingtables is an uncommon practice today. When non-specific network traffic ofthis type is encountered, the most prudent action from a securityperspective is to shun or disallow it. If the source of this traffic islegitimate the user will then identify him or herself.

Error Message    %IDS-4-UNAVAILABLE: Sig:2004:ICMP Echo Request - from %i to %i 

Explanation    Triggers when a IP datagram is received with the ''protocol'' field of the IP header set to 1 (ICMP) and the ''type'' field in the ICMP header set to 8 (Echo Request). Commonly used to perform reconnaissance sweeps. Suspicion should be raised when a large number of these packets are found on the network.

Recommended Action    The ICMP Echo Request is issued by the source to determineif the destination is ''alive''. When the destination receives the requestit will reply with an ICMP Echo Reply. This request/reply pair is mostcommonly implemented via the ''ping'' utility. Many network management toolsuse this utility or some derivative. This is extremely common networktraffic. Suspicion should be raised when a large number of these packets arefound on the network. If no legitimate reason for this traffic can beidentified, prudent security practices would suggest that the source beshunned.

Error Message    %IDS-4-UNAVAILABLE: Sig:2005:ICMP Time Exceeded for a Datagram - from 
%i to %i 

Explanation    Triggers when a IP datagram is received with the ''protocol'' field of the IP header set to 1 (ICMP) and the ''type'' field in the ICMP header set to 11(Time Exceeded for a Datagram). No known exploits incorporate this option.

Recommended Action    ICMP Time Exceeded datagrams are issued when a router hashad to drop a datagram whose Time to Live (TTL) flag has expired. This is anormal and necessary type of network traffic. Large numbers of this datagramtype on the network are indicative of network difficulties or may beindicative of hostile actions. If no network problems can be identified toaccount for the traffic prudent security practices would suggest that thesource be shunned.

Error Message    %IDS-4-UNAVAILABLE: Sig:2006:ICMP Parameter Problem on Datagram - from 
%i to %i 

Explanation    Triggers when a IP datagram is received with the ''protocol'' field of the IP header set to 1 (ICMP) and the ''type'' field in the ICMP header set to 12 (Parameter Problem on Datagram). No known exploits incorporate this option.

Recommended Action    ICMP Parameter Problem datagrams are issued when a routerhas had to drop a datagram because it was malformed. This is a normal andnecessary type of network traffic. Large numbers of this datagram type onthe network are indicative of network difficulties or may be indicative ofhostile actions. If no network problems can be identified to account for thetraffic prudent security practices would suggest that the source be shunned.

Error Message    %IDS-4-UNAVAILABLE: Sig:2007:ICMP Timestamp Request - from %i to %i 

Explanation    Triggers when a IP datagram is received with the ''protocol'' field of the IP header set to 1 (ICMP) and the ''type'' field in the ICMP header set to 13 (Timestamp Request). ICMP Timestamp Requests could be used to perform reconnaissance sweeps of networks. No known exploits incorporate this option.

Recommended Action    The ICMP Timestamp Request/Reply pair can be used tosynchronize system clocks on the network. The requesting system issues theTimestamp Request bound for a destination, the destination system respondswith a Timestamp Reply message. This is normal network traffic, but isuncommon on most networks. Suspicion should be raised when a large number ofthese packets are found on the network. If no legitimate reason for thistraffic can be identified prudent security practices would suggest that thesource be shunned.

Error Message    %IDS-4-UNAVAILABLE: Sig:2008:ICMP Timestamp Reply - from %i to %i 

Explanation    Triggers when a IP datagram is received with the ''protocol'' field of the IP header set to 1 (ICMP) and the type field in the ICMP header set to 14 (Timestamp Reply). No known exploits incorporate this option.

Recommended Action    The ICMP Timestamp Request/Reply pair can be used tosynchronize system clocks on the network. The requesting system issues theTimestamp Request bound for a destination, the destination system respondswith a Timestamp Reply message. This is normal network traffic, but isuncommon on most networks. Suspicion should be raised when a large number ofthese packets are found on the network. If no legitimate reason for thistraffic can be identified prudent security practices would suggest that thesource be shunned.

Error Message    %IDS-4-UNAVAILABLE: Sig:2009:ICMP Information Request - from %i to %i 

Explanation    Triggers when a IP datagram is received with the ''protocol'' field of the IP header set to 1 (ICMP) and the ''type'' field in the ICMP header set to 15 (Information Request).

Recommended Action    This datagram type is obsolete and should not beencountered. When non-specific network traffic of this type is encountered,the most prudent action from a security perspective is to shun or disallowit. If the source of this traffic is legitimate the user will then identifyhim or herself.

Error Message    %IDS-4-UNAVAILABLE: Sig:2010:ICMP Information Reply - from %i to %i 

Explanation    Triggers when a IP datagram is received with the ''protocol'' field of the IP header set to 1 (ICMP) and the ''type'' field in the ICMP header set to 16 (ICMP Information Reply). No known exploit exists.

Recommended Action    This datagram type is obsolete and should not beencountered. When non-specific network traffic of this type is encountered,the most prudent action from a security perspective is to shun or disallowit. If the source of this traffic is legitimate the user will then identifyhim or herself.

Error Message    %IDS-4-UNAVAILABLE: Sig:2011:ICMP Address Mask Request - from %i to %i 

Explanation    Triggers when a IP datagram is received with the ''protocol'' field of the IP header set to 1 (ICMP) and the ''type'' field in the ICMP header set to 17 (Address Mask Request). ICMP Address Mask Requests could be used to perform reconnaissance sweeps of networks.

Recommended Action    The ICMP Address Mask Request/Reply pair can be used todetermine the subnet mask used on the network. The requesting system issuesthe Address Mask Request bound for a destination, the destination systemresponds with an Address Mask Reply message. This is normal network traffic,but is uncommon on most networks. Suspicion should be raised when a largenumber of these packets are found on the network. If no legitimate reasonfor this traffic can be identified prudent security practices would suggestthat the source be shunned.

Error Message    %IDS-4-UNAVAILABLE: Sig:2012:ICMP Address Mask Reply - from %i to %i 

Explanation    Triggers when a IP datagram is received with the ''protocol'' field of the IP header set to 1 (ICMP) and the ''type'' field in the ICMP header set to 18 (Address Mask Reply). No known exploits incorporate this option.

Recommended Action    The ICMP Address Mask Request/Reply pair can be used todetermine the sublet mask used on the network. The requesting system issuesthe Address Mask Request bound for a destination, the destination systemresponds with an Address Mask Reply message. This is normal network traffic,but is uncommon on most networks. Suspicion should be raised when a largenumber of these packets are found on the network. If no legitimate reasonfor this traffic can be identified prudent security practices would suggestthat the source be shunned.

Error Message    %IDS-4-UNAVAILABLE: Sig:2150:Fragmented ICMP Traffic - from %i to %i 

Explanation    Triggers when a IP datagram is received with the protocol field of the IP header set to 1 (ICMP) and either the more fragments flag is set to 1 (ICMP) or there is an offset indicated in the offset field.

Recommended Action    IP datagrams may be fragmented normally as they aretransported across the network, but ICMP is rarely fragmented. The trafficshould be investigated. If no legitimate reason for the fragmentation can befound and especially if the packets seem to be originating from a singlesource, prudent security practices would suggest that the host be shunned.

Error Message    %IDS-4-UNAVAILABLE: Sig:2151:Large ICMP Traffic - from %i to %i 

Explanation    While it is possible to receive ICMP datagrams that have a size greater than 1024 bytes, this is a highly unusual occurrence that warrants investigation.

Recommended Action    While it is possible to receive ICMP datagrams that have asize greater than 1024 bytes, this is a highly unusual occurrence thatwarrants investigation. If no legitimate reason for the large packet sizecan be found and especially if the packets seem to be originating from asingle source, prudent security practices would suggest that the host beshunned.

Error Message    %IDS-4-UNAVAILABLE: Sig:2154:ICMP Ping of Death Attack - from %i to %i 

Explanation    Triggers when a IP datagram is received with the protocol field of the IP header set to 1(ICMP), the Last Fragment bit is set, and ( IP offset * 8 ) + ( IP data length) 65535 that is to say, the IP offset (which represents the starting position of this fragment in the original packet, and which is in 8 byte units) plus the rest of the packet isgreater than the maximum size for an IP packet. This indicates a denial of service attack.

Recommended Action    This indicates a denial of service attack. It is likely that the sourceaddress has been spoofed making shunning ineffective

Error Message    %IDS-4-UNAVAILABLE: Sig:3040:TCP - No bits set in flags - from %i to %i 

Explanation    Triggers when a TCP packet is received with no bits set in the flags field.

Recommended Action    There is no legitimate use for malformed TCP datagrams. This is unusual traffic and warrants investigation. Hacker tools will generateTCP packets with no bits set in the flags field in an attempt to eludeintrusion dection. When non-specific network traffic of thistype is encountered, the most prudent action from a security perspectiveis to shun or disallow it. If the source of this traffic is legitimatethe user will then identify him or herself.

Error Message    %IDS-4-UNAVAILABLE: Sig:3041:TCP - SYN and FIN bits set - from %i to %i 

Explanation    Triggers when a TCP packet is received with both the SYN and FIN bits set in the flags field.

Recommended Action    There is no legitimate use for malformed TCP datagrams. This is unusual traffic and warrants investigation. Hacker tools will generateTCP packets with the SYN and FIN bits set in the flags field in an attempt to eludeintrusion dection. When non-specific network traffic of thistype is encountered, the most prudent action from a security perspectiveis to shun or disallow it. If the source of this traffic is legitimatethe user will then identify him or herself.

Error Message    %IDS-4-UNAVAILABLE: Sig:3042:TCP - FIN bit with no ACK bit in flags - 
from %i to %i 

Explanation    Triggers when a TCP packet is received with the FIN bit set but with no ACK bit set in the flags field.

Recommended Action    There is no legitimate use for malformed TCP datagrams. This is unusual traffic and warrants investigation. Hacker tools will generateTCP packets with the FIN bit set but with no ACK bit set in the flags field in an attempt to elude intrusion dection. When non-specific network traffic of this type is encountered, the most prudent action from a security perspective is to shun or disallow it. If the source of this traffic is legitimate the user will then identify him or herself.

Error Message    %IDS-4-UNAVAILABLE: Sig:3050:Half-Open Syn Flood - from %i to %i 

Explanation    Triggers when the number of half-open TCP connections exceeds the high-water mark or the one minute high rate mark

Recommended Action    There are no known sources that would legitimately generatethis traffic pattern. This may be indicative of some type of network problemand should be investigated. To avoid depletion of your network resources itis recommended that the source be shunned during the course of theinvestigation. If no network problems are discovered prudent securitypractices would suggest that the source be shunned permanently.

Error Message    %IDS-4-UNAVAILABLE: Sig:3100:Smail Attack - from %i to %i 

Explanation    Triggers on the very common ''smail'' attack against e-mail servers. This attack attempts to cause e-mail servers to execute programs on the attacker's behalf.

Recommended Action    For security reasons users should not be allowed to executeprograms via e-mail servers. This is a very serious indication that yournetwork may be under attack and the source should be shunned immediately.

Error Message    %IDS-4-UNAVAILABLE: Sig:3101:Sendmail Invalid Recipient - from %i to 
%i 

Explanation    Triggers on any mail message with a ' 'pipe'' (|) symbol in the recipient field.

Recommended Action    For security reasons users should not be allowed to executeprograms via e-mail servers. This is a very serious indication that yournetwork may be under attack and the source should be shunned immediately.

Error Message    %IDS-4-UNAVAILABLE: Sig:3102:Sendmail Invalid Sender - from %i to %i 

Explanation    Triggers on any mail message with a ''pipe'' (|) symbol in the ''From:'' field.

Recommended Action    For security reasons users should not be allowed to executeprograms via e-mail servers. This is a very serious indication that yournetwork may be under attack and the source should be shunned immediately.

Error Message    %IDS-4-UNAVAILABLE: Sig:3103:Sendmail Reconnaissance - from %i to %i 

Explanation    Triggers when ''expn'' or ''vrfy'' commands are issued to the SMTP port.

Recommended Action    These commands are commonly used to verify that a user mailaccount exists on the server or to expand an alias to determine who theactual recipients of a message may be. Users that use the EXPN and VRFYfunctions for legitimate purposes will trigger this signature. Theinformation that can be obtained is useful, but not dangerous on its own.Monitoring of future traffic for patterns of misuse is recommended.

Error Message    %IDS-4-UNAVAILABLE: Sig:3104:Archaic Sendmail Attacks - from %i to %i 

Explanation    Triggers when ''wiz'' or ''debug'' commands are sent to the SMTP port.

Recommended Action    There is no reason for this type of traffic to be seen onmodern networks. There is little chance that there will be any adverseeffects from someone attempting these ''old'' hacks. Prudent securitypractices would suggest that the source of this attempt be shunned.

Error Message    %IDS-4-UNAVAILABLE: Sig:3105:Sendmail Decode Alias - from %i to %i 

Explanation    Triggers on any mail message with '': decode@'' in the header. The decode alias is used to uudecode files and is primarily implemented as a convenience for system administration.

Recommended Action    The decode alias is used to uudecode files and is primarilyimplemented as a convenience for system administration. For securitypurposes this should not be allowed and the service should be disabled. Ifallowed, users that mail to the alias will trigger this signature. Recommendshunning of hosts that attempt to mail to this alias especially if they areoutside of your network.

Error Message    %IDS-4-UNAVAILABLE: Sig:3106:Excessive Rcpt to: (SPAM) - from %i to %i 

Explanation    Parse for RCPT TO: in header. Alarm on threshold.

Recommended Action    Some mailing list software may trigger this signature.

Error Message    %IDS-4-UNAVAILABLE: Sig:3107:Majordomo Execute Attack - from %i to %i 

Explanation    A bug in the Majordomo program will allow remote users to execute arbitrary commands at the privilege level of the server.

Recommended Action    Prudent security practices would suggest that the source of this attempt be shunned.

Error Message    %IDS-4-UNAVAILABLE: Sig:3150:FTP Remote Command Execution - from %i to 
%i 

Explanation    Triggers when someone tries to execute the FTP SITE command.

Recommended Action    The FTP Site command allows a user to execute a limitednumber of commands via the FTP server on the host machine. No authenticationis required to execute the command. The commands that may be executed varyfrom system to system and on many systems the SITE command is notimplemented. Recommend that the SITE command be disabled on FTP servers ifpossible. If this signature is triggered from a source outside of yournetwork prudent security practices would suggest that the source be shunned.

Error Message    %IDS-4-UNAVAILABLE: Sig:3151:FTP SYST Command Attempt - from %i to %i 

Explanation    Triggers when someone tries to execute the FTP SYST command.

Recommended Action    The FTP SYST command returns the type of operating systemthat the FTP server is running. Authentication is not required to executethis command. SYST provides information that may be used to refine attackmethods. FTP from Linux causes SYST signature to fire. Some proxies, such asthe TIS Toolkit, issue the SYST command as a matter of course. Running anFTP version with SYST disabled.

Error Message    %IDS-4-UNAVAILABLE: Sig:3152:FTP CWD ~root - from %i to %i 

Explanation    Triggers when someone tries to execute the CWD ~root command.

Recommended Action    There is no known reason that this command should ever beexecuted. If this signature is triggered from a source outside of yournetwork prudent security practices would suggest that the source be shunned.

Error Message    %IDS-4-UNAVAILABLE: Sig:3153:FTP Improper Address Specified - from %i 
to %i 

Explanation    Triggers if a port command is issued with an address that is not the same as the requesting host.

Recommended Action    Triggers if a port command is issued with an address that isnot the same as the requesting host.

Error Message    %IDS-4-UNAVAILABLE: Sig:3154:FTP Improper Port Specified - from %i to 
%i 

Explanation    Triggers if a port command is issued with a data port specified that is 65535.

Recommended Action    Triggers if a port command is issued with a data port specifiedthat is 65535.

Error Message    %IDS-4-UNAVAILABLE: Sig:4050:UDP Bomb - from %i to %i 

Explanation    Triggers when the UDP length specified is less than the IP length specified. This malformed packet type is associated with a denial of service attempt.

Recommended Action    There is no legitimate use for malformed datagrams. Thismay be indicative of systems that are experiencing problems with theirkernel or NIC cards. This is unusual traffic and warrants investigation.When non-specific network traffic of this type is encountered, the mostprudent action from a security perspective is to shun or disallow it. If thesource of this traffic is legitimate the user will then identify him orherself.

Error Message    %IDS-4-UNAVAILABLE: Sig:4100:Tftp Passwd File - from %i to %i 

Explanation    Triggered when someone tries to tftp a password file.

Recommended Action    System administrators might use this service to updatesystem files. It is a high security risk if this is normal practice andshould be avoided. No other benign triggers exist for this signature. Ifafter investigation the alarm was not generated by a system administrator,prudent security practices would suggest that the source be shunned.

Error Message    %IDS-4-UNAVAILABLE: Sig:6100:RPC Port Registration - from %i to %i 

Explanation    Triggers when attempts are made to register new RPC services on a target host.

Recommended Action    No benign triggers exist for this signature. Prudentsecurity practices suggest that the source of this attempt should beshunned.

Error Message    %IDS-4-UNAVAILABLE: Sig:6101:RPC Port Unregistration - from %i to %i 

Explanation    Triggers when attempts are made to unregister new RPC services on a target host.

Recommended Action    No benign triggers exist for this signature. Prudentsecurity practices suggest that the source of this attempt should beshunned.

Error Message    %IDS-4-UNAVAILABLE: Sig:6102:RPC Dump - from %i to %i 

Explanation    Triggers when an RPC dump request isissued to a target host.

Recommended Action    This is a common procedure performed by many systemadministrators and wary users to determine which RPC services are beingoffered. Executing this procedure is most likely due to curiosity on thepart of a novice user or a system administrator performing systemmaintenance. If upon investigation no valid user can be associated with thisevent, prudent security practices would suggest shunning the source.

Error Message    %IDS-4-UNAVAILABLE: Sig:6103:Proxied RPC Request - from %i to %i 

Explanation    Triggers when a proxied RPC request is sent to the portmapper of a target host.

Recommended Action    If this procedure is allowed on your network those usersthat employ it will trigger the signature. This may be a serious attempt atgaining unauthorized access and if the source of the attempt is not withinyour network they should be shunned.

Error Message    %IDS-4-UNAVAILABLE: Sig:6150:RPC ypserv Portmap Request - from %i to %i 

Explanation    Triggers when a request is made to the portmapper for the YP server daemon (ypserv) port.

Recommended Action    If this procedure is allowed on your network those usersthat employ it will trigger the signature. This may be a serious attempt atgaining unauthorized access and if the source of the attempt is not withinyour network they should be shunned.

Error Message    %IDS-4-UNAVAILABLE: Sig:6151:RPC ypbind Portmap Request - from %i to %i 

Explanation    Triggers when a request is made to the portmapper for the YP bind daemon (ypbind) port.

Recommended Action    If this procedure is allowed on your network those usersthat employ it will trigger the signature. This may be a serious attempt atgaining unauthorized access and if the source of the attempt is not withinyour network they should be shunned.

Error Message    %IDS-4-UNAVAILABLE: Sig:6152:RPC ypbind yppasswdd Portmap Request - 
from %i to %i 

Explanation    Triggers when a request is made to the portmapper for the YP password daemon (yppasswdd) port.

Recommended Action    If this procedure is allowed on your network those usersthat employ it will trigger the signature. This may be a serious attempt atgaining unauthorized access and if the source of the attempt is not withinyour network they should be shunned.

Error Message    %IDS-4-UNAVAILABLE: Sig:6153:RPC ypupdated Portmap Request - from %i 
to %i 

Explanation    Triggers when a request is made to the portmapper for the YP update daemon (ypupdated) port.

Recommended Action    If this procedure is allowed on your network those usersthat employ it will trigger the signature. This may be a serious attempt atgaining unauthorized access and if the source of the attempt is not withinyour network they should be shunned.

Error Message    %IDS-4-UNAVAILABLE: Sig:6154:RPC ypxfrd Portmap Request - from %i to %i 

Explanation    Triggers when a request is made to the portmapper for the YP transfer daemon (ypxfrd) port.

Recommended Action    If this procedure is allowed on your network those usersthat employ it will trigger the signature. This may be a serious attempt atgaining unauthorized access and if the source of the attempt is not withinyour network they should be shunned.

Error Message    %IDS-4-UNAVAILABLE: Sig:6155:RPC mountd Portmap Request - from %i to %i 

Explanation    Triggers when a request is made to the portmapper for the mount daemon (mountd) port.

Recommended Action    If this procedure is allowed on your network those usersthat employ it will trigger the signature. This may be a serious attempt atgaining unauthorized access and if the source of the attempt is not withinyour network they should be shunned.

Error Message    %IDS-4-UNAVAILABLE: Sig:6175: RPC rexd Portmap Request - from %i to %i 

Explanation    Triggers when a request is made to the portmapper for the remote execution daemon (rexd) port. The remote execution daemon is the serverresponsible for remote program execution. This may be indicative of an attempt to gain unauthorized access to system resources.

Recommended Action    If this procedure is allowed on your network, those userswho employ it will trigger the signature. This may be a serious attempt atgaining unauthorized access and if the source of the attempt is not withinyour network, it should be shunned.

Error Message    %IDS-4-UNAVAILABLE: Sig:6180:RPC rexd Attempt - from %i to %i 

Explanation    Triggers when a call to the rexd program is made. The remote execution daemon is the server responsible for remote program execution. Thismay be indicative of an attempt to gain unauthorized access to system resources.

Recommended Action    If this service is being used legitimately, this alarm willfire. For security purposes, this service really should not be used.

Error Message    %IDS-4-UNAVAILABLE: Sig:6190:statd Buffer Overflow - from %i to %i 

Explanation    Triggers when a large statd request is sent.

Recommended Action    You should not see this in legitimate traffic.

Error Message    %IDS-4-UNAVAILABLE: Sig:8000:FTP Retrieve Password File - from %i to %i 

Explanation    Triggers on string ''passwd'' issued during an FTP session.

Recommended Action    System administrators might use this service to updatesystem files. It is a high security risk if this is normal practice andshould be avoided. No other benign triggers exist for this signature. Ifafter investigation the alarm was not generated by a system administrator,prudent security practices would suggest that the source be shunned.

Error Message    %IDS-4-RPC_UNSET_REQUEST: Sig:6101:RPC Port Unregistration - from %i 
to %i 

Explanation    Triggers when attempts are made to unregister new RPC services on a target host.

Recommended Action    No benign triggers exist for this signature. Prudent security practices suggest that the source of this attempt should be shunned.

Error Message    %IDS-4-RPC_UNSET_REQUEST: Sig:6101:RPC Port Unregistration - from %i 
to %i 

Explanation    Triggers when attempts are made to unregister new RPC services on a target host.

Recommended Action    No benign triggers exist for this signature. Prudentsecurity practices suggest that the source of this attempt should beshunned.

Error Message    %IDS-4-STR_MATCH_SIG: Sig:8000:FTP Retrieve Password File - from %i to 
%i 

Explanation    Triggers on string ''passwd'' issued during an FTP session.

Recommended Action    System administrators might use this service to update system files. It is a high security risk if this is normal practice and should be avoided. No other benign triggers exist for this signature. If after investigation the alarm was not generated by a system administrator, prudent security practices would suggest that the source be shunned.

Error Message    %IDS-4-TCP_FIN_ONLY_SIG: Sig:3042:TCP - FIN bit with no ACK bit in 
flags - from %i to %i 

Explanation    Triggers when a TCP packet is received with the FIN bit set but with no ACK bit set in the flags field.

Recommended Action    There is no legitimate use for malformed TCP datagrams. This is unusual traffic and warrants investigation. Hacker tools will generateTCP packets with the FIN bit set but with no ACK bit set in the flags field in an attempt to elude intrusion dection. When non-specific network traffic of this type is encountered, the most prudent action from a security perspective is to shun or disallow it. If the source of this traffic is legitimate the user will then identify him or herself.

Error Message    %IDS-4-TCP_FTP_CWDROOT_SIG: Sig:3152:FTP CWD ~root - from %i to %i 

Explanation    Triggers when someone tries to execute the CWD ~root command.

Recommended Action    There is no known reason that this command should ever be executed. If this signature is triggered from a source outside of your etwork prudent security practices would suggest that the source be shunned.

Error Message    %IDS-4-TCP_FTP_PORT_BADADDR_SIG: Sig:3153:FTP Improper Address 
Specified - from %i to %i 

Explanation    Triggers if a port command is issued with an address that is not the same as the requesting host.

Recommended Action    Triggers if a port command is issued with an address that is ot the same as the requesting host.

Error Message    %IDS-4-TCP_FTP_PORT_BADPORT_SIG: Sig:3154:FTP Improper Port Specified 
- from %i to %i 

Explanation    Triggers if a port command is issued with a data port specified that is <1024 or 65535.

Recommended Action    Triggers if a port command is issued with a data port specified hat is 65535.

Error Message    %IDS-4-TCP_FTP_SITE_SIG: Sig:3150:FTP Remote Command Execution - from 
%i to %i 

Explanation    Triggers when someone tries to execute the FTP SITE command.

Recommended Action    The FTP Site command allows a user to execute a limited umber of commands via the FTP server on the host machine. No authentication is required to execute the command. The commands that may be executed vary from system to system and on many systems the SITE command is not implemented. Recommend that the SITE command be disabled on FTP servers if possible. If this signature is triggered from a source outside of your etwork prudent security practices would suggest that the source be shunned.

Error Message    %IDS-4-TCP_FTP_SITE_SIG: Sig:3150:FTP Remote Command Execution - from 
%i to %i 

Explanation    Triggers when someone tries to execute the FTP SITE command.

Recommended Action    The FTP Site command allows a user to execute a limitednumber of commands via the FTP server on the host machine. No authenticationis required to execute the command. The commands that may be executed varyfrom system to system and on many systems the SITE command is notimplemented. Recommend that the SITE command be disabled on FTP servers ifpossible. If this signature is triggered from a source outside of yournetwork prudent security practices would suggest that the source be shunned.

Error Message    %IDS-4-TCP_FTP_SYST_SIG: Sig:3151:FTP SYST Command Attempt - from %i 
to %i 

Explanation    Triggers when someone tries to execute the FTP SYST command.

Recommended Action    The FTP SYST command returns the type of operating system hat the FTP server is running. Authentication is not required to execute his command. SYST provides information that may be used to refine attack methods. FTP from Linux causes SYST signature to fire. Some proxies, such as he TIS Toolkit, issue the SYST command as a matter of course. Running an FTP version with SYST disabled.

Error Message    %IDS-4-TCP_MAJORDOMO_EXEC_BUG: Sig:3107:Majordomo Execute Attack - 
from %i to %i 

Explanation    A bug in the Majordomo program will allow remote users to execute arbitrary commands at the privilege level of the server.

Recommended Action    Prudent security practices would suggest that the source of this attempt be shunned.

Error Message    %IDS-4-TCP_NO_FLAGS_SIG: Sig:3040:TCP - No bits set in flags - from %i 
to %i 

Explanation    Triggers when a TCP packet is received with no bits set in the flags field.

Recommended Action    There is no legitimate use for malformed TCP datagrams. This is unusual traffic and warrants investigation. Hacker tools will generate TCP packets with no bits set in the flags field in an attempt to elude intrusion dection. When non-specific network traffic of this ype is encountered, the most prudent action from a security perspective is to shun or disallow it. If the source of this traffic is legitimate he user will then identify him or herself.

Error Message    %IDS-4-TCP_SENDMAIL_BAD_FROM_SIG: Sig:3102:Sendmail Invalid Sender - 
from %i to %i 

Explanation    Triggers on any mail message with a ''pipe'' (|) symbol in the ''From:'' field.

Recommended Action    For security reasons users should not be allowed to executeprograms via e-mail servers. This is a very serious indication that yournetwork may be under attack and the source should be shunned immediately.

Error Message    %IDS-4-TCP_SENDMAIL_BAD_TO_SIG: Sig:3101:Sendmail Invalid Recipient - 
from %i to %i 

Explanation    Triggers on any mail message with a ' 'pipe'' (|) symbol in the recipient field.

Recommended Action    For security reasons users should not be allowed to execute programs via e-mail servers. This is a very serious indication that your etwork may be under attack and the source should be shunned immediately.

Error Message    %IDS-4-TCP_SENDMAIL_BOUNCE_SIG: Sig:3100:Smail Attack - from %i to %i 

Explanation    Triggers on the very common ''smail'' attack against e-mail servers. This attack attempts to cause e-mail servers to execute programs on the attacker's behalf.

Recommended Action    For security reasons users should not be allowed to executeprograms via e-mail servers. This is a very serious indication that yournetwork may be under attack and the source should be shunned immediately.

Error Message    %IDS-4-TCP_SENDMAIL_DECODE: Sig:3105:Sendmail Decode Alias - from %i 
to %i 

Explanation    Triggers on any mail message with '': decode@'' in the header. The decode alias is used to uudecode files and is primarily implemented as a convenience for system administration.

Recommended Action    The decode alias is used to uudecode files and is primarily implemented as a convenience for system administration. For security purposes this should not be allowed and the service should be disabled. If allowed, users that mail to the alias will trigger this signature. Recommend shunning of hosts that attempt to mail to this alias especially if they are outside of your network.

Error Message    %IDS-4-TCP_SENDMAIL_INVALID_COMMAND: Invalid SMTP command - from %i to 
%i 

Explanation    Triggers on an invalid SMTP command in the SMTP connection. This message indicates that a suspicious violation was detetected that may be an attack to the mail server system.

Recommended Action    This is unusual traffic and may warrant investigation.

Error Message    %IDS-4-TCP_SENDMAIL_OLD_SIG: Sig:3104:Archaic Sendmail Attacks - from 
%i to %i 

Explanation    Triggers when ''wiz'' or ''debug'' commands are sent to the SMTP port.

Recommended Action    There is no reason for this type of traffic to be seen on modern networks. There is little chance that there will be any adverse effects from someone attempting these ''old'' hacks. Prudent security practices would suggest that the source of this attempt be shunned.

Error Message    %IDS-4-TCP_SENDMAIL_VRFY_SIG: Sig:3103:Sendmail Reconnaissance - from 
%i to %i 

Explanation    Triggers when ''expn'' or ''vrfy'' commands are issued to the SMTP port.

Recommended Action    These commands are commonly used to verify that a user mailaccount exists on the server or to expand an alias to determine who theactual recipients of a message may be. Users that use the EXPN and VRFYfunctions for legitimate purposes will trigger this signature. Theinformation that can be obtained is useful, but not dangerous on its own.Monitoring of future traffic for patterns of misuse is recommended.

Error Message    %IDS-4-TCP_SYN_ATTACK_SIG: Sig:3050:Half-Open Syn Flood - from %i to 
%i 

Explanation    Triggers when the number of half-open TCP connections exceeds the high-water mark or the one minute high rate mark

Recommended Action    There are no known sources that would legitimately generate his traffic pattern. This may be indicative of some type of network problem and should be investigated. To avoid depletion of your network resources it is recommended that the source be shunned during the course of the investigation. If no network problems are discovered prudent security practices would suggest that the source be shunned permanently.

Error Message    %IDS-4-TCP_SYN_FIN_SIG: Sig:3041:TCP - SYN and FIN bits set - from %i 
to %i 

Explanation    Triggers when a TCP packet is received with both the SYN and FIN bits set in the flags field.

Recommended Action    There is no legitimate use for malformed TCP datagrams. This is unusual traffic and warrants investigation. Hacker tools will generateTCP packets with the SYN and FIN bits set in the flags field in an attempt to eludeintrusion dection. When non-specific network traffic of thistype is encountered, the most prudent action from a security perspectiveis to shun or disallow it. If the source of this traffic is legitimatethe user will then identify him or herself.

Error Message    %IDS-4-UDP_BOMB_SIG: Sig:4050:UDP Bomb - from %i to %i 

Explanation    Triggers when the UDP length specified is less than the IP length specified. This malformed packet type is associated with a denial of service attempt.

Recommended Action    There is no legitimate use for malformed datagrams. This may be indicative of systems that are experiencing problems with their kernel or NIC cards. This is unusual traffic and warrants investigation. When non-specific network traffic of this type is encountered, the most prudent action from a security perspective is to shun or disallow it. If the source of this traffic is legitimate the user will then identify him or
erself.

Error Message    %IDS-4-UDP_TFTP_PASSWD_SIG: Sig:4100:Tftp Passwd File - from %i to %i 

Explanation    Triggered when someone tries to tftp a password file.

Recommended Action    System administrators might use this service to updatesystem files. It is a high security risk if this is normal practice andshould be avoided. No other benign triggers exist for this signature. Ifafter investigation the alarm was not generated by a system administrator,prudent security practices would suggest that the source be shunned.

IDTATM25-1

Error Message    %IDTATM25-1-UNAVAILABLE: IDTATM25(%d/%d), Init failed at %s. 

Explanation    The ATM25 network module hardware may be bad

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message    %IDTATM25-1-UNAVAILABLE: IDTATM25(%d/%d), Init failed, CSR%d=0x%04x. 

Explanation    The ATM25 network module hardware may be bad

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message    %IDTATM25-1-UNAVAILABLE: Only found %d interfaces on bay %d, shutting 
down bay 

Explanation    The ATM25 network module hardware may be bad

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

IDTATM25-3

Error Message    %IDTATM25-3-UNAVAILABLE: Device reported %#x 

Explanation    The ATM25 network module hardware may be bad

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message    %IDTATM25-3-UNAVAILABLE: IDB= %s, RX lost sync, Interface reset 

Explanation    RX hang

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message    %IDTATM25-3-UNAVAILABLE: IDB= %s, TX hang, Interface reset 

Explanation    TX hang

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message    %IDTATM25-3-UNAVAILABLE: Interface %s, %s not supported 

Explanation    The ATM25 network module hardware may be bad

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message    %IDTATM25-3-UNAVAILABLE: Interface %s, Failed to down vc %d (Cause: %s) 

Explanation    The ATM25 network module hardware may be bad

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message    %IDTATM25-3-UNAVAILABLE: Interface %s, Failed to setup vc %d (Cause: 
%s) 

Explanation    The ATM25 network module hardware may be bad

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

IDTATM25-6

Error Message    %IDTATM25-6-UNAVAILABLE: ATM transmit bandwidth is limited to smallest 
shaped value. 

Explanation    Any PVC configured with traffic shaping will limit the entire ATM interface to not exceed the bandwidth of any traffic shaped pvc.

IF Messages

This section contains interface messages.

IF-2

Error Message    %IF-2-IDB_TABLE_INIT: Malloc failed while initializing idb table 

Explanation    A memory allocation failure occurred while an IDB table was being initialized.

Recommended Action    Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

IF-3

Error Message    %IF-3-BADMACADDRTYPE: illegal mac address type, [dec] 

Explanation    This is an internal error that was recovered gracefully.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

IF-4

Error Message    %IF-4-BACKWARD_COUNTERS: Corrected for backward [chars] counters 
([int] -> [int]) on [chars] 

Explanation    The interface specified in the message has a packet counter that has decreased in number. This condition can occur if a packet is counted and then dropped. This event was detected and corrected.

Recommended Action    If this condition persists, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IF-4-NOBGPROCESS: Network background process not running. [chars] 

Explanation    A process which manages network interface background processing is not yet running, but another system process has tried to send the process a message. An interface on the router may have missed a request to bring itself up.

Recommended Action    Reset the interface by entering a shutdown command followed by a no shutdown command.

IFDAMP Messages

This section contains interface dampening (IFDAMP) messages.

IFDAMP-5

Error Message    %IFDAMP-5-ZERODELAY: dampening reuse timer is updated with 0 delay time 

Explanation    An inconsistency was detected in the dampening reuse timer wheel.

Recommended Action    No action is required.

IFMGR Messages

This section contains interface manager messages.

IFMGR-3

Error Message    %IFMGR-3-BADIFINDEXTABLE: The file nvram:ifIndex-table is corrupt. 

Explanation    The file is not in the expected format.

Recommended Action    If possible, delete the file. If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IFMGR-3-DUP_IFINDEX: Duplicate ifIndex (%d) found for ifDescr 

Explanation    Two interfaces have the same interface index in the interface manager assigned list. The second interface registered with the interface manager will be assigned a new index.

Recommended Action    If interface index persistence is not required, then no action is required. Otherwise, reload the router with the proper interface index table and image. If the error message only appears from the standby route processor (RP), reload the standby RP.

Error Message    %IFMGR-3-IFDB: IF manager interface database [chars] failure- [dec] 

Explanation    An internal software error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IFMGR-3-IFINDEX_PERSIST_ENTRY_CORRUPT: [chars] seems to be corrupted. 
Trying to read [dec] size 

Explanation    The ifIndex table is corrupted.

Recommended Action    Delete the ifindex table.

Error Message    %IFMGR-3-INVALID_PERSISTENT_DATA: Invalid persistent data 

Explanation    An attempt was made to write invalid persistent data.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IFMGR-3-NOIMACP: IF manager control process failed to start 

Explanation    An internal software error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IFMGR-3-NOVECTOR: Interface manager failed to allocate IF vector. 
size %d 

Explanation    The interface vector could not be allocated with the number of elements required, either initially or by a resize operation.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IFMGR-3-VECTOREXD: IF manager attempted to use interface [dec] 
outside vector range. 

Explanation    An internal software error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IFMGR-3-VECTORIFSUSPECT: IF manager added interface %d which is 
unexpectedly large. 

Explanation    The ifIndex allocation scheme is trying to add an ifIndex value much larger than the former greatest ifIndex value in the DB. It should assign sequential ifIndex values.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IFMGR-3-VECTORPOSUSED: IF manager attempted to add interface [dec] 
which was already added. 

Explanation    An internal software error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

IFMGR-4

Error Message    %IFMGR-4-NOIFINDEX: All SNMP if indices are exhausted 

Explanation    All SNMP MIB indexes have been exhausted. Interfaces will not be able to obtain an interface index that they can use to register with the interface MIB.

Recommended Action    Attempt a system reload. If the problem persists after the system reload, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IFMGR-4-NOSYNC: ifIndex not being synced between active and standby 

Explanation    When the standby module comes up, the tuple of ifIndex and ifDescr is synchronized so that interfaces get the same ifIndex when they come up. This error happens when the interface does not get the ifIndex for the given ifDescr.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IFMGR-4-STACK_RELATIONSHIP_ADD_ERROR: [chars]: Request for creating 
invalid stack relationship [dec], [dec] 

Explanation    The IF MGR received the call to add invalid stack relationship. The higher and lower ifIndex are shown in the message. The module of the IF MGR from which this message is generated is also shown in the message.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IFMGR-4-VECTORIFSUSPECT: IF manager added interface [dec] which is 
unexpectedly large. 

Explanation    The ifIndex allocation scheme gives out sequential ifIndex values. This message comes from the IF-MGR DB when it is trying to add an ifIndex value much larger than the former greatest ifIndex value in the DB.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

IFMGR-7

Error Message    %IFMGR-7-NO_IFINDEX_FILE: Unable to open [chars] [chars] 

Explanation    This is a informational message. This means system found no saved ifIndex information, and ifIndex is not persisted across reboots. The ifIndices will be reassigned.

Recommended Action    1. No Action, if 'snmp-server ifIndex persist' is not configured. 2. If 'snmp-server ifindex persist' is configured then copy the error message exactly as it appears, and report it to your technical support representative.

IFS Messages

This section contains Cisco IOS file system messages.

IFS-3

Error Message    %IFS-3-UNAVAILABLE: '%s' file system missing required functions, not 
created 

Explanation    Some file systems require a certain set of function to be present in order to be usable. This file sustem does not support all the mandatory functionality.

Recommended Action    Call your technical support representative for assistance.

Error Message    %IFS-3-UNAVAILABLE: Data does not match expected internal 
representation 

Explanation    A mismatch exists between the representation of data extracted from the filesystem and the expectation of its formatting. This may occur when running in a dual-RP environment, with different IOS versions running on the two RPs.

Recommended Action    Ensure both RPs are running the IOS same version, if running in a dual-RP environment. If not, call your technical support representative for assistance.

Error Message    %IFS-3-UNAVAILABLE: Failed to add %s, filesystem prefix exists 

Explanation    A file system cound not be added because another file system exists with the same name.

Recommended Action    Contact your technical support representative.

Error Message    %IFS-3-UNAVAILABLE: Failed to add %s, maximum filesystems %d 

Explanation    The router has reached the maximum number of file systems that can be supported at one time.

Recommended Action    Contact your technical support representative.

Error Message    %IFS-3-UNAVAILABLE: Failed to create %s file system, %s 

Explanation    An internal software error occurred.

Recommended Action    Call your technical support representative for assistance.

Error Message    %IFS-3-UNAVAILABLE: Failed to create %s simple file system, %s 

Explanation    An internal software error occurred.

Recommended Action    Call your technical support representative for assistance.

IFS-4

Error Message    %IFS-4-UNAVAILABLE: Failed to open %s, maximum open files %d) 

Explanation    The router has reached the maximum number of files that may be open at one time.

Recommended Action    Close some files and try again. If this messages recurs, contact your technical support representative.

IGMP Messages

This section contains Internet Group Management Protocol (IGMP) messages.

IGMP-3

Error Message    %IGMP-3-NO_DNS_SERVER: No DNS server is configured. DNS-based SSM 
mapping should be disabled if no DNS server is configured. 

Explanation    No domain name service (DNS) server is present. Processing of Internet Group Management Protocol (IGMP) packets may be delayed if the DNS lookup is done continuously.

Recommended Action    Disable DNS-based source specific multicast (SSM) mapping if no DNS server is present in the network.

Error Message    %IGMP-3-QUERY_INT_MISMATCH: Received a non-matching query interval %d, 
from querier address %i 

Explanation    An IGMP version mismatch was detected between routers.

Recommended Action    Configure both interfaces with the same IGMP version.

IGMP-6

Error Message    %IGMP-6-IGMP_CHANNEL_LIMIT: IGMP limit exceeded for channel (%i, %i) 
on %s by host %i 

Explanation    The allowed number of IGMP joiners reached the configured limit. New joiners cannot be allowed unless the configuration is changed.

Recommended Action    Enter the global or interface ip igmp limit command to adjust the allowed number of IGMP joiners. If the exceeding of current limits was unexpected, find the IP address of the denied host in the system log.

Error Message    %IGMP-6-IGMP_GROUP_LIMIT: IGMP limit exceeded for group (*, %i) on %s 
by host %i 

Explanation    The allowed number of IGMP joiners has exceeded the configured limit. New joiners cannot be allowed unless the configuration is changed.

Recommended Action    Enter the global or interface ip igmp limit command to adjust the allowed number of IGMP joiners. If the exceeding of current limits was unexpected, find the IP address of the denied host in the system log.

ILACC Messages

This section contains the initial mesages.

ILACC-1

Error Message    %ILACC-1-UNAVAILABLE: msgtxt_initfail 

Explanation    The hardware failed to initialize correctly.

Recommended Action    Repair or replace the controller.

Error Message    %ILACC-1-UNAVAILABLE: msgtxt_memoryerror 

Explanation    An Ethernet interface detected a hardware problem.

Recommended Action    Repair or replace the controller.

ILACC-3

Error Message    %ILACC-3-UNAVAILABLE: Unit %d, spurious IDON interrupt, csr%d=0x%04x 

Explanation    An Ethernet interface generated a spurious Initialization Done interrupt.

Recommended Action    Repair or replace the controller.

Error Message    %ILACC-3-UNAVAILABLE: Unit %d, underflow error 

Explanation    The Ethernet hardware is requesting data faster than the system can supply it. This condition might indicate that the system is at the limit of its performance.

Recommended Action    A small number of underflows might not be a cause for concern. You can monitor underflows with the show interface command. Reducing the load on the router or installing a higher-performance router should alleviate this problem.

Error Message    %ILACC-3-UNAVAILABLE: msgtxt_badunit 

Explanation    An internal software error occurred.

Recommended Action    If this message recurs, contact your technical support representative.

Error Message    %ILACC-3-UNAVAILABLE: msgtxt_ownerror 

Explanation    An Ethernet interface is malfunctioning, or an internal software error occurred.

Recommended Action    Repair or replace the controller.

ILACC-4

Error Message    %ILACC-4-UNAVAILABLE: Unit %d, babble error, csr0 = 0x%x 

Explanation    An Ethernet interface is malfunctioning.

Recommended Action    Determine whether the malfunction stems from a software or hardware error by turning off all fast switching. Error messages showing that the packet is too large for the link indicate a software error at a high level. Copy the error message exactly as it appears, and report it to your technical support representative. Receiving no error messages indicates a hardware error. Repair or replace the controller.

ILACC-5

Error Message    %ILACC-5-UNAVAILABLE: Unit %d, excessive collisions. TDR=%d 

Explanation    An Ethernet cable is broken or unterminated, or the transceiver is unplugged. The time delay reflectometer (TDR) counter is an internal ILACC counter that counts the time (in ticks of 100 ns each) from the start of a transmission to the occurrence of a collision. Because a transmission travels about 35 feet per tick, this value is useful to determine the approximate distance to a cable fault.

Recommended Action    If the transceiver appears to be properly terminated, repair or replace the Ethernet interface card.

Error Message    %ILACC-5-UNAVAILABLE: Unit %d, late collision error 

Explanation    An Ethernet transceiver is malfunctioning, the Ethernet is overloaded, or the Ethernet cable is too long.

Recommended Action    Repair or replace the controller.

Error Message    %ILACC-5-UNAVAILABLE: Unit %d, lost carrier. Transceiver problem? 

Explanation    An Ethernet transceiver is unplugged or faulty.

Recommended Action    Repair or replace the controller.

ILPOWER Messages

This section contains inline power messages.

ILPOWER-3

Error Message    %ILPOWER-3-CONTROLLER_ERR: Controller error, Controller number [dec]: 
[chars] 

Explanation    An error involving the inline power controller has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %ILPOWER-3-CONTROLLER_IF_ERR: Controller interface error, [chars]: 
[chars] 

Explanation    An interface error has been detected between the inline power controller and the system.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error, Interface 
[chars]: [chars] 

Explanation    A port error has been reported by the inline power controller.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %ILPOWER-3-ILPOWER_INTERNAL_IF_ERROR: Inline Power internal error, 
interface %s: %s 

Explanation    A software sanity check failed in the course of Inline Power processing.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

ILPOWER-5

Error Message    %ILPOWER-5-AC_DISCONNECT: Interface [chars]: AC disconnect 

Explanation    The AC power has been disconnected.

Recommended Action    No action is required.

Error Message    %ILPOWER-5-DC_DISCONNECT: Interface [chars]: DC disconnect 

Explanation    The DC power has been disconnected.

Recommended Action    No action is required.

Error Message    %ILPOWER-5-ILPOWER_MISCONFIG: Interface [chars] is denied power as it 
requires more power than configured maximum wattage([dec]). 

Explanation    The interface is denied power as it requires more power than the configured maximum wattage.

Recommended Action    No action is required.

Error Message    %ILPOWER-5-ILPOWER_NOPOWER_AVAIL: Interface [chars] is denied power 
because either the system ran out of power or module limit reached. 

Explanation    There is not enough power left in the system to supply to the interface specified in the error message.

Recommended Action    No action is required.

Error Message    %ILPOWER-5-ILPOWER_POWEROVERDRAWN: Interface [chars] is shutdown as it 
is consuming more power ([dec]) than the configured maximum value ([dec]). 

Explanation    The specified interface is shut down because it is consuming more power than the configured maximum value.

Recommended Action    No action is required.

Error Message    %ILPOWER-5-LINKDOWN_DISCONNECT: Interface [chars]: Link down 
disconnect 

Explanation    A link has been disconnected.

Recommended Action    No action is required.

Error Message    %ILPOWER-5-POWER_GRANTED: Interface [chars]: Power granted 

Explanation    Power has been granted for the interface specified.

Recommended Action    No action is required.

ILPOWER-7

Error Message    %ILPOWER-7-DETECT: Interface [chars]: Power Device detected: [chars] 

Explanation    A power device has been detected.

Recommended Action    No action is required.

ILPOWER_RF Messages

This section contains inline power redundancy facility (RF) messages.

ILPOWER_RF-3

Error Message    %ILPOWER_RF-3-CREATE_PROCESS: Inline power RF client failed to create 
%s process 

Explanation    The inline power redundancy facility (RF) client could not create a process. This condition will cause bulk synchronization to fail.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

IMAGEMGR Messages

This section contains image manager messages.

IMA-1

Error Message    %IMA-1-UNAVAILABLE: Command opcode %#x on channel %d on slot %d was 
rejected. 

Explanation    The IMA firmware has rejected the command because of the current protocol state of the interface, or the opcode is undefined.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IMA-1-UNAVAILABLE: Delaying activation of %s until a currently active 
interface is shutdown. 

Explanation    The IMA network module cannot only support up to 4 activate interfaces at one time. Once more that 4 are no shutdown, each interface will wait for an existing interface to be shutdown before becoming activated.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IMA-1-UNAVAILABLE: Download of %s to failed to at %#x on IMA Network 
Module in slot %d. 

Explanation    An error occured during the download of firmware to the IMA NM.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IMA-1-UNAVAILABLE: FPGA Download on module in slot %d failed. 

Explanation    An error occured during the download of the FPGA on the IMA NM.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IMA-1-UNAVAILABLE: Module in slot %d had a shared memory error. 

Explanation    Memory on the NM failed power-on diagnostic check.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IMA-1-UNAVAILABLE: Network processor on module in slot %d failed to 
come up. 

Explanation    An error occured during reset of the IMA NM.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IMA-1-UNAVAILABLE: Previous process %d never received mail response 
from slot %d. 

Explanation    The previous requesting process was terminated before receiving a mail reply.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IMA-1-UNAVAILABLE: The IMA Network Module in slot %d is incompatible 
with the PCMCIA controller in the router. 

Explanation    The PCMCIA controller is down level.

Recommended Action    Copy the error message exactly as it appears, and contact your technical support representative for upgrade information.

Error Message    %IMA-1-UNAVAILABLE: The Network Module in slot %d did not initialize. 

Explanation    The Network Module has failed its initialization.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IMA-1-UNAVAILABLE: The Network Module in slot %d reports an invalid 
%s device id of %#x. 

Explanation    The IMA network module hardware may be bad.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IMA-1-UNAVAILABLE: The mailbox for channel %d on IMA Network Module 
in slot %d is completely full. Message %d was dropped. 

Explanation    The IMA NM mailboxes are full and cannot accept any more requests.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IMA-1-UNAVAILABLE: Timed out waiting for a response to command %#x 
from slot %d. 

Explanation    The IMA NM failed to respond with the requested information. Information to be displayed by requesting exec command or SNMP manager is incomplete. This is an extremely rare event and should only happen under severe system load.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

IMA-4

Error Message    %IMA-4-UNAVAILABLE: Link %d will become the common transmit clock once 
it is added to group %s 

Explanation    The link configured as the common transmit clock is not a member of the group, so it cannot provide the clock. The group will use a common transmit clock that is automatically chosen from one of the other active links.

Recommended Action    LOG_STD_NO_ACTION

Error Message    %IMA-4-UNAVAILABLE: Link %d will initiate the test pattern procedure 
once its added to group %s. 

Explanation    The link chosen to transmit the test pattern is not a member of the group, thereby preventing the transmission of the test pattern.

Recommended Action    LOG_STD_NO_ACTION

Error Message    %IMA-4-UNAVAILABLE: Stopping test pattern procedure on group %s. 

Explanation    The link transmitting the test pattern has been removed from the group, thereby stopping the transmission of the test pattern.

Recommended Action    LOG_STD_NO_ACTION

IMA-5

Error Message    %IMA-5-UNAVAILABLE: %s is using channel %d but has no configured links. 

Explanation    The IMA interface has been configured Up but has no link members. It cannot become active until active links are added to the group.

Recommended Action    LOG_STD_NO_ACTION

Error Message    %IMA-5-UNAVAILABLE: IMA Group %s now has %d active links, active link 
bitmap is %#x. 

Explanation    Active Links were added or removed from the Group, changing its bandwidth.

Recommended Action    LOG_STD_NO_ACTION

IMAGEMGR-6

Error Message    %IMAGEMGR-6-AUTO_ADVISE_SW: [chars] 

Explanation    A line of output from the auto-advise-software process is being displayed.

Recommended Action    No action is required.

Error Message    %IMAGEMGR-6-AUTO_ADVISE_SW_INITIATED: Auto-advise-software process 
initiated for switch number(s) [chars] 

Explanation    Systems with incompatible software have been detected in the stack. The stack will now determine whether or not software is available to be copied to the incompatible systems, and if so, advise the user how to copy it. Otherwise, the system lets the user know that the software on the stack needs to be updated.

Recommended Action    No action is required.

Error Message    %IMAGEMGR-6-AUTO_COPY_SW: [chars] 

Explanation    A line of output from the auto-copy-software process is being displayed.

Recommended Action    No action is required.

Error Message    %IMAGEMGR-6-AUTO_COPY_SW_INITIATED: Auto-copy-software process 
initiated for switch number(s) [chars] 

Explanation    Systems with incompatible software have been detected in the stack. The stack determines whether or not software is available to be copied to the incompatible systems, and whether or not it is appropriate to copy the software automatically.

Recommended Action    No action is required.

Error Message    %IMAGEMGR-6-AUTO_DOWNLOAD_SW: [chars] 

Explanation    A line of output from the automatic software download process is being displayed.

Recommended Action    No action is required.

Error Message    %IMAGEMGR-6-AUTO_DOWNLOAD_SW_INITIATED: Auto-download-software 
process initiated for switch number(s) [chars] 

Explanation    Systems with incompatible software have been detected in the stack. The stack attempts to download software from a previously configured location, and install it to make the systems compatible.

Recommended Action    No action is required.

IMAGE_SIMFS Messages

This section contains In-Memory System Image File System messages.

IMAGE_SIMFS-3

Error Message    %IMAGE_SIMFS-3-NOPROCESS: Failure spawning Memory Reclaim process 

Explanation    The creation of an Cisco IOS process to compact memory previously held by in-memory image files has failed, probably due to a software defect.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

IMAGE_VFS Messages

This section contains Image Virtual File System messages.

Error Message    %IMAGE_VFS-3-UNAVAILABLE: %s image checksum mismatch. 

Explanation    The checksum of the image in memory is different from the expected checksum

Recommended Action    Check whether the image file is complete and uncorrupted

Error Message    %IMAGE_VFS-3-UNAVAILABLE: Failed to locate all the Image files,on 
bootup 

Explanation    The relevant image file is missing or it couldn't be extracted(due to corruption), or the router has insufficient memory to load the entire image

Recommended Action    If the TAR file is part of a system image, enter the show image contents file archive-name, where archive-name is the name of the archive. Enter the show region and show version commands. Open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %IMAGE_VFS-3-UNAVAILABLE: Failed to open %s, which was loaded from 
archive %s 

Explanation    The relevant image file is missing or it could'nt be extracted(due to corruption), or the Archive itself is missing(In case of Flash based access)

Recommended Action    If the file is not in memory, check the archive file. If the file is a TAR archive file and not part of a system software image, enter the archive tar table archive-name command, where archive-name is the name of the TAR archive. If the TAR file is part of a system image, enter the show image contents file archive-name, where archive-name is the name of the archive. Enter the dir all and show version commands. Open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

Error Message    %IMAGE_VFS-3-UNAVAILABLE: Failure spawning No Cache process 

Explanation    The creation of an IOS process to delete in-memory Image files failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IMAGE_VFS-3-UNAVAILABLE: archive verification failed for file %s & 
archive %s. 

Explanation    The archive in the local device is different from the version whose image file has been loaded into memory. This can happen if the archive was deleted from the local device &/or replaced by another file of the same name

Recommended Action    Check whether the archive file is complete and uncorrupted.Also check if the size of the archive & the last modification time (if available) is what you expect it to be. Enter the dir all and show version commands.

INBAND Messages

This section contains inband management messages.

INBAND-3

Error Message    %INBAND-3-BAD_PAK: Possibly un-encapsulated packet passed to Mistral: 
int [chars] type [int] stat [hex] flags [hex] size [dec] offset [dec] requeue_token 
[int] r1 [int] r2 [int] total detected [int] 

Explanation    There is a badly encapsulated packet from the process level.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %INBAND-3-INVALID_SEND: Invalid send operation (packet on [chars]) 

Explanation    An internal error caused illegal call to device driver: normal operation continues.

Recommended Action    If this message recurs, copy the error message exactly as it appears on the console or in the system log. Research and attempt to resolve the error using the Output Interpreter https://www.cisco.com/cgi-bin/Support/OutputInterpreter/home.pl. Issue the show tech-support command to gather data that may help identify the nature of the error. Also perform a search of the Bug Toolkit http://www.cisco.com/cgi-bin/Support/Bugtool/home.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support.

Error Message    %INBAND-3-NO_BUFFER_POOLS: Initialization of private buffer pools 
failed 

Explanation    Private buffer pools were not created for etsec ibc.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Research and attempt to resolve the error using the Output Interpreter https://www.cisco.com/cgi-bin/Support/OutputInterpreter/home.pl. Issue the show tech-support command to gather data that may help identify the nature of the error. Also perform a search of the Bug Toolkit http://www.cisco.com/cgi-bin/Support/Bugtool/home.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support.

Error Message    %INBAND-3-TOOBIG: An attempt made to send giant packet on [chars] 
([dec] bytes from [hex], max allowed [dec]) 

Explanation    An attempt was made to send an oversized packet.

Recommended Action    Copy the error message exactly as it appears on the console or in the system log. Research and attempt to resolve the error using the Output Interpreter https://www.cisco.com/cgi-bin/Support/OutputInterpreter/home.pl. Issue the show tech-support command to gather data that may help identify the nature of the error. Also perform a search of the Bug Toolkit http://www.cisco.com/cgi-bin/Support/Bugtool/home.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support.

INBAND-6

Error Message    %INBAND-6-UNAVAILABLE: Bad idb for vector %s: %s vlan %d total %d 

Explanation    Bad idb returned from get_l3_swidb

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

INBAND_or_EOBC-3

Error Message    %INBAND_or_EOBC-3-UNAVAILABLE: Invalid send operation (packet on %s) 

Explanation    Internal error caused illegal call to device driver:normal operation continues

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

INDXOBJ-3

Error Message    %INDXOBJ-3-UNAVAILABLE: index object routine %s called from interrupt 
context 

Explanation    inappropriate index object routine called from interrupt routine.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

INTERFACE_API Messages

This section contains binary API for the interface descriptor block messages.

INTERFACE_API-1

Error Message    %INTERFACE_API-1-NOMOREHWIDBNUMBERS: No more hardware IDB numbers can 
be issued. The maximum allowed numbers, [dec], has been reached for this platform. 

Explanation    No more hardware IDB numbers can be issued. The maximum allowed number has been reached for this platform.

Recommended Action    In addition to the following, copy the information from the show idb command output. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %INTERFACE_API-1-NOMORESWIDBNUMBERS: No more software IDB numbers can 
be issued. The maximum allowed numbers, [dec], has been reached for this platform. 

Explanation    No more software IDB numbers can be issued. The maximum allowed number has been reached for this platform.

Recommended Action    In addition to the following, copy the information from the show idb command output. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

INTERFACE_API-3

Error Message    %INTERFACE_API-3-CANNOTGETMTU: Error [dec] received while getting MTU: 
[chars]. Using default [int] 

Explanation    A software error has occurred while attempting to retrieve the MTU value from the interface.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %INTERFACE_API-3-IFNUMTOIDBERROR: Error occurred while using the ifnum 
to idb table for interface [chars], if number [dec], during [chars] 

Explanation    A software error has occurred. An operation on the interface number to the IDB mapping table could not be performed successfully.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message     %INTERFACE_API-3-INVALIDSUBBLOCKPARAMETERS: Invalid subblock 
parameters for [chars] were supplied. 

Explanation    An internal software error occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %INTERFACE_API-3-NOADDSUBBLOCK: The [chars] subblock named [chars] was 
not added to [chars] 

Explanation    A software error has occurred. IDB subblocks could not be added.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %INTERFACE_API-3-SUBNUMDBERR: subnum [hex] error in [chars] 

Explanation    A software error has occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

INTERFACE_API-4

Error Message    %INTERFACE_API-4-UNAVAILABLE: %s may not be referencing the correct 
swidb 

Explanation    An internal software error occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %INTERFACE_API-4-UNAVAILABLE: A error occurred while using the Index 
Table utility for %s. 

Explanation    A software error has occurred; this message is displayed when an Index table feature could not be used successfully.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %INTERFACE_API-4-UNAVAILABLE: Function %s detected an invalid %s 
pointer of %08lX, ignoring 

Explanation    A software error has occurred, this message is displayed when an invalid pointer is detected.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %INTERFACE_API-4-UNAVAILABLE: pak-if_input is not initialized 

Explanation    An internal software error occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %INTERFACE_API-4-UNAVAILABLE: pak-if_output is not initialized 

Explanation    An internal software error occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

INTF_SYNC-2

Error Message    %INTF_SYNC-2-UNAVAILABLE: %s 

Explanation    A software error occurred during initialization of the Interface Sync RF subsystem

Recommended Action    Check for sufficient processor memory. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

INTF_SYNC-3

Error Message    %INTF_SYNC-3-UNAVAILABLE: Incorrectly formatted message (0x%x, 0x%x) 
received by %s 

Explanation    Inconsistent message data was received from the peer CPU, possibly due to an incompatible image version.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %INTF_SYNC-3-UNAVAILABLE: Unable to transmit message type %d from %s 

Explanation    A transmit error occurred while sending msg to other CPU, due to msg translation

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %INTF_SYNC-3-UNAVAILABLE: Unable to transmit message type %d from %s 

Explanation    A transmit error occurred while sending msg to other CPU, due to non-availability of buffer

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %INTF_SYNC-3-UNAVAILABLE: Unknown message type 0x%x received by %s 

Explanation    An unknown message type was received from the peer CPU, possibly due to an incompatible image version.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

INTF_SYNC-5

Error Message    %INTF_SYNC-5-UNAVAILABLE: Msgtype %s sent by %s unsupported by peer. 

Explanation    Peer responded that it didn't recognize a message sent by this CPU, possibly due to a different image version.

Recommended Action    May require a software upgrade on the Standby CPU. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

INTR_MGR Messages

This section contains interrupt manager messages.

Error Message    %INTR_MGR-3-BURST: [chars] [chars] [[dec]] 

Explanation    A burst of hardware interrupts of the specified type has occurred.

Recommended Action    The message text on the console or in the system log provides more information on the specific cause of the error. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %INTR_MGR-3-INTR: [chars] [chars] 

Explanation    The specified interrupt event has been detected.

Recommended Action    The message text on the console or in the system log provides more information on the specific cause of the error. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %INTR_MGR-3-MAXBURST: [chars] [chars] [[dec]] 

Explanation    The specified hardware interrupt has exceeded the maximum allowed number of bursts.

Recommended Action    The message text on the console or in the system log provides more information on the specific cause of the error. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

IOCARD-3

Error Message    %IOCARD-3-UNAVAILABLE: %s in slot%d is not supported on %s chassis 

Explanation    The software identified and disabled the FE on the I/O card

Recommended Action    No action required.

Error Message    %IOCARD-3-UNAVAILABLE: IO card discovered in non-zero slot %d 

Explanation    An IO card was detected in a non-zero slot.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

IOS_LICENSE-2

Error Message    %IOS_LICENSE-2-UNAVAILABLE: No memory available for %s 

Explanation    The Ios licensing subsystem could not obtain the memory it needed.

Recommended Action    If this error message recurs, attempt to reduce memory usage by reducing the number of router features, or interfaces, enabled. Alternatively, add more memory. To display total memory usage for a router enter show memory summary at the privileged command line prompt. To display buffer usage enter show buffers at the prompt.

Error Message    %IOS_LICENSE-2-UNAVAILABLE: No valid license avaiable to run any 
feature 

Explanation    The Ios licensing subsystem could not get a valid license to run any feature on the box, please purchase a license.

Recommended Action    Purchase a valid license to run the features you requier on the box. You should contact the cisco portal or a TAC engineer to get a license. You can do a show license at the privileged command line prompt to get the list of availabe feature in the box

IOS_LICENSE-3

Error Message    %IOS_LICENSE-3-UNAVAILABLE: %s 

Explanation    The ios licensing subsystem failed to create a process/watched boolean etc to watch request from the remote show subsys license commands

Recommended Action    please capture the error msg and forward it to the appropriate licensing component

Error Message    %IOS_LICENSE-3-UNAVAILABLE: %s failed 

Explanation    The rttys calls in the Ios licensing subsystem failed for some reason, please capture the error msg and forward it to the appropriate licensing component

Recommended Action    please capture the error msg and forward it to the appropriate licensing component

Error Message    %IOS_LICENSE-3-UNAVAILABLE: %s failed with an error = %s 

Explanation    The ipc calls in the Ios licensing subsystem failed for some reason, please capture the error msg and forward it to the appropriate licensing component

Recommended Action    please capture the error msg and forward it to the appropriate licensing component

Error Message    %IOS_LICENSE-3-UNAVAILABLE: an unknown message type was received, 
dropping it, msg_type = %d 

Explanation    Ios licensing subsystem received a msg type which it does not recognizes or support

Recommended Action    please capture the error msg and forward it to the appropriate licensing component.

IOS_LICENSE_IMAGE_APPLICATION-3

Error Message    %IOS_LICENSE_IMAGE_APPLICATION-3-UNAVAILABLE: %s 

Explanation    The ios image licensing subsystem received an event for an unknown version of a feature

Recommended Action    please capture the error msg and forward it to the appropriate licensing component

Error Message    %IOS_LICENSE_IMAGE_APPLICATION-3-UNAVAILABLE: %s 

Explanation    The ios image licensing subsystem received an event which it does not understand or recognizes

Recommended Action    please capture the error msg and forward it to the appropriate licensing component

Error Message    %IOS_LICENSE_IMAGE_APPLICATION-3-UNAVAILABLE: %s 

Explanation    The ios licensing subsystem failed to create a process/watched boolean etc to watch request from the remote show subsys license commands

Recommended Action    please capture the error msg and forward it to the appropriate licensing component

IOS_LICENSE_IMAGE_APPLICATION-6

Error Message    %IOS_LICENSE_IMAGE_APPLICATION-6-UNAVAILABLE: %s %s. 

Explanation    There is no valid license available on the box and we are running on a default feature

Recommended Action    please purchase a license to activate required features

Error Message    %IOS_LICENSE_IMAGE_APPLICATION-6-UNAVAILABLE: EULA must be accepted 
for license level = %s 

Explanation    This is an informational message to inform user that the user needs to reissue the command from an interactive terminal

Recommended Action    This is an informational message, no action is required

Error Message    %IOS_LICENSE_IMAGE_APPLICATION-6-UNAVAILABLE: Module name = %s Next 
reboot level = %s and License = %s 

Explanation    This is an informational message to display the change in the next reboot license level

Recommended Action    This is an informational message, no action is required

Error Message    %IOS_LICENSE_IMAGE_APPLICATION-6-UNAVAILABLE: Please issue 'license 
boot' config command to make extension license (%s) available for use. 

Explanation    This is an informational message to info user that to make extension license available to support image level, licensing image level needs to be configured

Recommended Action    This is an informational message, no action is required

IP Messages

This section contains Internet Protocol (IP) messages.

IP-3

Error Message    %IP-3-LOOPPAK: Looping packet detected and dropped src=[IP_address], 
dst=[IP_address],hl=[int], tl=[int], prot=[int], port=[int], dport=[int] 
in=[chars], nexthop=[IP_address], out=[chars] options=[chars] 

Explanation    A looping packet was detected. A common cause is a misconfiguration of an IP helper address. The helper address should be the same address as that of the server of the intended service. Putting the address of the router in the helper address causes a routing loop to be created.

Recommended Action    To resolve this issue, analyze the source and destination address of the looped packets. Verify that the configuration of IP helper addresses in the switch correctly point to the right device (for example the DHCP server, the DNS server, or WINS server).

Error Message    %IP-3-MAXIRDP: Attempt to send IRDP to proxies exceeding configurable 
limit: [dec], interface: [chars], secondary = [dec], proxy = [dec]

Explanation    The sum of configured secondary addresses and configured proxy addresses exceeds the number of total addresses that the IRDP can support in its implementation.

Recommended Action    Reduce the number of either the secondary IP addresses or proxy addresses configured for the interface.

Error Message    %IP-3-NOOUTINTF: Output interface not available. source address: 
[IP_address], destination address: [IP_address], routing type: [int] 

Explanation    The output interface for this packet is not set.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

IP-4

Error Message    %IP-4-UNAVAILABLE: Bad IP address and mask %i%m in class_resolve() 

Explanation    An internal software error occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IP-4-UNAVAILABLE: Duplicate address %i on %s, sourced by %e 

Explanation    Another system is using your IP address.

Recommended Action    Change the IP address of one of the two systems.

Error Message    %IP-4-UNAVAILABLE: IP unicast reverse-path check disabled on %s 

Explanation    The IP verify unicast reverse-path feature was disabled because CEF was disabled (either through configuration or due to an internal error.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IP-4-UNAVAILABLE: Zero MAC address for %i in ARP cache 

Explanation    An entry in the ARP cache have a NULL MAC address

Recommended Action    If this message recurs, call your technical support representative for assistance.

IP-5

Error Message    %IP-5-UNAVAILABLE: %s 

Explanation    Error occured in IP access checks.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IP-5-UNAVAILABLE: %s 

Explanation    Error occured in intialisation of TURBOACL.

Recommended Action    Show process. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IP-5-UNAVAILABLE: Attempting web install from host %i 

Explanation    A hardware or software error occurred.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message    %IP-5-UNAVAILABLE: Selected IP address %i 

Explanation    A hardware or software error occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IP-5-UNAVAILABLE: Sending DNS response to %i (request was for %i) 

Explanation    A hardware or software error occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IP-5-UNAVAILABLE: Terminating DNS process 

Explanation    A hardware or software error occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

IP-6

Error Message    %IP-6-L2MCASTDROP: Layer 2 Multicast packet detected and dropped, 
src=[IP_address], dst=[IP_address] 

Explanation    Layer 2 Multicast packet with Layer3 Unicast Destination was dropped.

Recommended Action    No action is required.

Error Message    %IP-6-PHYBCASTDROP: Physical broadcast packet detected and dropped, 
src=[IP_address], dst=[IP_address] 

Explanation    Layer 2 Broadcast packet with Layer3 Unicast Destination was dropped.

Recommended Action    No action is required.

IPA-3

Error Message    %IPA-3-UNAVAILABLE: %s: invalid mailbox command: %02X 

Explanation    A subsytem attempted to register a mailbox command that is out of range.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IPA-3-UNAVAILABLE: %s: unknown mailbox command: %02X %02X %02X %02X 

Explanation    The channel port adapter sent a mailbox command that the driver did not expect. This may occur if there is a version mismatch between the system image and the microcode.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IPA-3-UNAVAILABLE: Port IO %s process terminating. 

Explanation    Unexpected termination of a port io process.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IPA-3-UNAVAILABLE: bay [%s] mailbox response timed out after (%u + 
%u) usecs, mbx=%08X 

Explanation    A mailbox command sent from driver to the channel port adapter never completed within the expected time limit. As a result of this error, the channel port adapter driver will reset the port adapter and reload microcode to it.

Recommended Action    The reset and reload rectified the problem. If that did not occur, then try the microcode reload operation again. If the error still occurs, record the output from the following commands:

show tech

dir slot0:

dir slot1:

show log

Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IPA-3-UNAVAILABLE: bay [%u] failed to establish %s connection (%04X) 

Explanation    An attempt to establish the console or debugger connection with the channel port adapter failed.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

IPACCESS Messages

This section contains IP security messages.

IPACCESS-2

Error Message    %IPACCESS-2-NOMEMORY: Alloc fail for acl-config buffer. Disabling 
distributed mode on lc 

Explanation    Unable to malloc a buffer to send access-list configuration down to linecards.

Recommended Action    Enter a show chunks command and report the output, along with this error message, to your technical support representative.

Error Message    %IPACCESS-2-UNAVAILABLE: Alloc fail for acl-config buffer. Disabling 
distributed mode on lc 

Explanation    Unable to malloc a buffer to send access-list configuration down to linecards.

Recommended Action    Enter a show chunks command and report the output, along with this error message, to your technical support representative.

Error Message    %IPACCESS-2-UNAVAILABLE: Incorrect length acl ipc xdr of type=%s 
len=%d received 

Explanation    Received an acl message of the wrong size for that type

Recommended Action    Report this error message, to your tech support representative.

Error Message    %IPACCESS-2-UNAVAILABLE: Invalid request to allocate chunk of size %d 

Explanation    We only allow acl chunks of max size IPACCESS_LARGE_CHUNK_SZ

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

IPACCESS-4

Error Message    %IPACCESS-4-INVALIDACL: Invalid ACL field: [chars] is [dec] 

Explanation    An internal software error occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

IPC Messages

This section contains InterProcessor Communication (IPC) messages.

IPC-2

Error Message    %IPC-2-UNAVAILABLE: %s: Cannot send IPC message from 0x%x to 0x%x: info 
0x%x 

Explanation    An error occurred when sending IPC message

Recommended Action    Show tech-support ipc. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IPC-2-UNAVAILABLE: Bad refcount in %s, ptr=%x, count=%d 

Explanation    A reference count is used to track the usage of IPC messages.A function increments the count when it begins to use a message and decrements it when it finishes. When the count becomes zero, the data structure is freed. This message indicates that when the count was accessed, it was found to be zero or negative.

Recommended Action    Show tech-support ipc. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IPC-2-UNAVAILABLE: Boolean NULL in IPC message: %x. 

Explanation    A watched boolean that was allocated while sending the message is found to be NULL, when an ACK arrived.

Recommended Action    Show tech-support ipc. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IPC-2-UNAVAILABLE: IPC port pre-closure overflow : 0x%x : 0x%x 

Explanation    An application attempts to close an ipc port when there are messages pending in retransmit queue and ipc defer table overflows.

Recommended Action    Show ipc ports open. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IPC-2-UNAVAILABLE: IPC test: %s 

Explanation    The IPC test routines.

Recommended Action    IPC test only - no action required.

Error Message    %IPC-2-UNAVAILABLE: Invalid IPC Zone 0x%x. 

Explanation    Some operation is attempted on a zone ID not known to IPC

Recommended Action    Show tech-support ipc. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IPC-2-UNAVAILABLE: Invalid operation at interrupt level: %s %x 

Explanation    Debug Message. An IPC application has attempted an IPC action which has been prohibited from being performed at the interrupt level.

Recommended Action    Show ipc ports. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IPC-2-UNAVAILABLE: Lock done a deleted element 0x%x 

Explanation    An internal inconsistency was found in some IPC data structures.

Recommended Action    Show tech-support ipc. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IPC-2-UNAVAILABLE: Message for %x.%x has no receive queue or dispatch 
routine 

Explanation    The IPC user failed to provide any means of handling the received message.

Recommended Action    Show ipc ports. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IPC-2-UNAVAILABLE: No handler for ACK with data for port %x. 

Explanation    The IPC receiver appended data to an ACK. But at the sender, there is no corresponding ACK handler.

Recommended Action    Show tech-support ipc. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IPC-2-UNAVAILABLE: No memory available for %s 

Explanation    The IPC protocol subsystem could not obtain the memory it needed.

Recommended Action    If this error message recurs, attempt to reduce memory usage by reducing the number of router features, or interfaces, enabled. Alternatively, add more memory. To display total memory usage for a router enter show memory summary at the privileged command line prompt. To display buffer usage enter show buffers at the prompt. To display IPC usage enter show ipc queue at the prompt

Error Message    %IPC-2-UNAVAILABLE: Unlock done on already unlocked element 0x%x 

Explanation    An internal inconsistency was found in some IPC data structures.

Recommended Action    Show tech-support ipc. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

IPC-3

Error Message    %IPC-3-INVALID_PORT_INFO: Invalid port_info in the retry queue message 
- SRC_PORT = [hex], DEST_PORT = [hex], MSG_TYPE = [hex] 

Explanation    The IPC protocol subsystem detected that the port information is inconsistent. The port information is probably already freed by the application.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show tech ipc command from the master and the slave, to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IPC-3-ISSU_API_ERR: [chars] failed with error code [dec] 

Explanation    An ISSU API could not perform an operation for the IPC layer. The message text includes the error code from ISSU library.

Recommended Action    Enter the show issu client command. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IPC-3-ISSU_ERROR: [chars] failed with error code [dec] for seat [hex] 

Explanation    An ISSU API could not perform an operation for the IPC layer. The message text includes the error code from ISSU library.

Recommended Action    Enter the show issu fsm command. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

IPC-4

Error Message    %IPC-4-MSGMAXTIMEOUT: Invalid maximum timeout value [dec] seconds; 
Period - [dec]; Retries - [dec] 

Explanation    The maximum message timeout for an IPC message exceeds 2 minutes.

Recommended Action    Enter the show version command. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IPC-4-NOPORT: Port Not Found. [hex] --> [hex], Index:[hex], Seq: 
[dec], flags: [hex], size: [dec] 

Explanation    IPC received a message which is destined for a port that cannot be found by IPC.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Enter the show ipc status, show ipc ports, and debug ipc errors commands to gather data that may help identify the cause of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IPC-4-UNAVAILABLE: Failed for message size %d 

Explanation    System unable to allocate IPC message of required size.

Recommended Action    If this error message recurs, copy the error message exactly as it appears on the console or in the system log, contact your Cisco technical support representative with the gathered information. To display total memory usage for a router enter show memory summary at the privileged command line prompt. To display buffer usage enter show buffers at the prompt. To display IPC usage enter show ipc queue at the prompt

Error Message    %IPC-4-UNAVAILABLE: Invalid maximum timeout value %d seconds; Period 
- %d; Retries - %d 

Explanation    The maximum message timeout for an IPC message exceeds 2 minutes

Recommended Action    Capture 'sh version' and contact TAC

Error Message    %IPC-4-UNAVAILABLE: Port Not Found. %x -- %x, Index:%x, Seq: %d, flags: 
%x, size: %d 

Explanation    IPC Received a message which is destined for a port that cannot be found by IPC

Recommended Action    Capture 'sh ipc status', 'sh ipc ports' and 'deb ipc errors' outputs and contact TAC

IPC-5

Error Message    %IPC-5-UNAVAILABLE: %d messages pending in %s for the port %s(%x.%x) 
seat %x 

Explanation    Several IPC messages are pending to be processed. If the number increases, it may result in the IPC header cache or buffers being exhausted.

Recommended Action    Show tech-support ipc. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IPC-5-UNAVAILABLE: %s %s=0x%x %s=0x%x 

Explanation    IPC failed to register the control port

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IPC-5-UNAVAILABLE: %s %s=0x%x, %s 0x%x 

Explanation    IPC module could not find an IPC entity that is expected to be existing always

Recommended Action    Show tech-support ipc. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IPC-5-UNAVAILABLE: %s 

Explanation    IPC API is called with invalid argument.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IPC-5-UNAVAILABLE: %s 

Explanation    IPC message returned is Null

Recommended Action    Show tech-support ipc. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IPC-5-UNAVAILABLE: %s Dest Port 0x%x Session 0x%x Source 0x%x 

Explanation    While processing an incoming message, IPC encountered invalid data in its internal data structures.

Recommended Action    Show tech-support ipc. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IPC-5-UNAVAILABLE: %s: Flow control callback function is not provided 
by IPC Client %s 

Explanation    An IPC application cannot be controlled if flow need to be slowed down. This might result in drop of IPC packets

Recommended Action    Show ipc ports. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IPC-5-UNAVAILABLE: Cannot hold RPC message port: %#x, index: %d, type: 
%#x 

Explanation    An RPC request for an application could not be added to the RPC request table because pending requests have filled the RPC request table.

Recommended Action    Show tech-support ipc. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IPC-5-UNAVAILABLE: Failed to intialize IPC client 

Explanation    An IPC application cannot be initialized because its initialization function does not appear in the IPC initialization list.

Recommended Action    Show tech-support ipc. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IPC-5-UNAVAILABLE: Invalid registration 

Explanation    An IPC application has attempted to register NULL function in the IPC initialization list.

Recommended Action    Show tech-support ipc. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IPC-5-UNAVAILABLE: Passed Null backpressure handler 

Explanation    IPC cannot register application's NULL function in the IPC Backpressure handler list.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IPC-5-UNAVAILABLE: Q=0x%x %s %d 

Explanation    IPC queue is full.

Error Message    OUTPUT_INTERPRETER%IPC-5-UNAVAILABLE: Send message to peer for %s 
failed. Reason: %s 

Explanation    Client using IPC App Port has not been able to send message

Recommended Action    If the reason is 'no such port', then this may be caused because of the difference in the versions of IOS running on Active and the standby. Any other reason, please collect 'sh ipc stat' 'sh ipc rpc', 'sh ipc port' on active and standby RPs and contact tac

Error Message    %IPC-5-UNAVAILABLE: VIP-%s 

Explanation    The Cisco IOS software, running on a Versatile Interface Processor (VIP) card, generated this message. The error message has been passed to the Route Processor (RP) or Route Switch Processor (RSP) for display. This message appears only if the user has configured the service slavelog command.

Recommended Action    This is actually a Cisco IOS error message from a VIP. Handle it as indicated by the text after the 'VIP-' string in the error message.

IPC-6

Error Message    %IPC-6-MAXRPCTIMEOUT: Maximum RPC timeout value [dec] seconds set for 
port [hex] 

Explanation    The maximum RPC timeout for an IPC message exceeds the maximum expected value of 10 minutes.

Recommended Action    Enter the show techsupport ipc command. Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IPC-6-STATEFUL: %s 

Explanation    A stateful interprocess communication (IPC) event occurred.

Recommended Action    No action is required.

IPCGRP-3

Error Message    %IPCGRP-3-UNAVAILABLE: %s %s 

Explanation    Failed to create IPC port on RP.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IPCGRP-3-UNAVAILABLE: %s (%u) 

Explanation    The ID associated with an IPC card is either missing, duplicated, or cannot be created.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IPCGRP-3-UNAVAILABLE: %s (%u) 

Explanation    The IPC application tried to send a message that was larger than IPC could handle. The message was not transmitted.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IPCGRP-3-UNAVAILABLE: %s (%u) 

Explanation    The slave IPC cannot register with master.It cannot exchange messages with the master.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IPCGRP-3-UNAVAILABLE: %s 

Explanation    An IPC card has registered itself to the IPC master twice. The card malfunctioned and its IPC is not active.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IPCGRP-3-UNAVAILABLE: %s 

Explanation    Nonblocking IPC command queue initialization failure.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IPCGRP-3-UNAVAILABLE: %s 

Explanation    REXEC-On IPC command failure.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IPCGRP-3-UNAVAILABLE: %s: %s 

Explanation    An IPC error was detected

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message    %IPCGRP-3-UNAVAILABLE: Cannot find hwidb for interface(%u/%u) 

Explanation    Interface identifier does not exist for the interface addressed by the corresponding IPC message.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IPCGRP-3-UNAVAILABLE: Event %u from slot%u/%u: %s 

Explanation    IPC event processing operational errors.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IPCGRP-3-UNAVAILABLE: IPC command %u (slot%u/%u): %s 

Explanation    IPC command processing operational errors.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IPCGRP-3-UNAVAILABLE: Incorrect msg size (size=%u) 

Explanation    Wrong size of a REXEC-On IPC command.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IPCGRP-3-UNAVAILABLE: Invalid interface(%u/%u/%u) 

Explanation    Invalid interface addressed by the corresponding IPC message.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IPCGRP-3-UNAVAILABLE: Null %s ipc message 

Explanation    An empty IPC message, which is not expected to be received.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IPCGRP-3-UNAVAILABLE: Received empty ipc rexec cmd message 

Explanation    REXEC-On IPC command failure.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IPCGRP-3-UNAVAILABLE: System call for command %u (slot%u/%u) : %s 
(Cause: %s) 

Explanation    IPC kernel system call error.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

IPCOIR-3

Error Message    %IPCOIR-3-UNAVAILABLE: Card in slot %d/%d has an invalid card type in 
IDPROM 

Explanation    The linecard IDPROM is unprogrammed or has failed.

Recommended Action    Contact customer support.

Error Message    %IPCOIR-3-UNAVAILABLE: Couldn't load %s... 

Explanation    The indicated image is inaccessible

Recommended Action    Check the filename.

Error Message    %IPCOIR-3-UNAVAILABLE: IPC failed (%s) %s slot %u/%u 

Explanation    The IOS IPC protocol reported an unexpected error.

Recommended Action    Make sure the indicated card is still plugged in.

Error Message    %IPCOIR-3-UNAVAILABLE: Image version stamp missing 

Explanation    The loaded image did not contain a recognizable version stamp

Recommended Action    Replace the image with known-good bits, and try again.

Error Message    %IPCOIR-3-UNAVAILABLE: Incorrect API message version 0x%x 

Explanation    The linecard and IOS images are badly out of phase.

Recommended Action    Contact customer support.

Error Message    %IPCOIR-3-UNAVAILABLE: Incorrect message version obj 0x%x op 0x%x 
version 0x%x 

Explanation    The linecard and IOS images are badly out of phase.

Recommended Action    Contact customer support.

Error Message    %IPCOIR-3-UNAVAILABLE: Remote server refused to load slot %u/%u 
Error Message    %IPCOIR-3-UNAVAILABLE: TFTP of %s from %s failed... 

Explanation    The indicated image is inaccessible

Recommended Action    Check file permissions, network connectivity.

Error Message    %IPCOIR-3-UNAVAILABLE: Unable to create driver plugin in slot %d/%d. 

Explanation    A valid linecard driver plugin create failed.

Recommended Action    Perhaps a memory allocation failure, should not happen.

Error Message    %IPCOIR-3-UNAVAILABLE: Unable to get an IPC msg buffer in %d tries: 
slot %u/%u 

Explanation    The IOS IPC buffer pool was empty for a sustained period of time.

Recommended Action    Install more processor SDRAM in the PRE.

Error Message    %IPCOIR-3-UNAVAILABLE: Unable to initialize PRE ports. 

Explanation    The PRE plugin init sequence failed.

Recommended Action    Determine and fix cause.

Error Message    %IPCOIR-3-UNAVAILABLE: Unable to preanalyze driver plugin in slot 
%d/%d. 

Explanation    A valid linecard driver preanalyze failed.

Recommended Action    Possibly incompatible card types

Error Message    %IPCOIR-3-UNAVAILABLE: Unsupported card type (0x%x) in slot %d/%d. 

Explanation    The linecard is not supported by this version of IOS

Recommended Action    Contact customer support.

IPCOIR-4

Error Message    %IPCOIR-4-UNAVAILABLE: Get IPC msg buf failed %d time(s): slot %u/%u 
- retry in %d sec 

Explanation    The IOS IPC buffer pool was temporarily empty.

Recommended Action    Consider installing more processor SDRAM in the PRE.

IPC_RPM-3

Error Message    %IPC_RPM-3-UNAVAILABLE: %s %s 

Explanation    The ID associated with an IPC card is either missing, duplicated, or cannot be created.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message    %IPC_RPM-3-UNAVAILABLE: %s (%d) 

Explanation    An invalid IPC message was received during cc command exection

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IPC_RPM-3-UNAVAILABLE: %s (%d) 

Explanation    The IPC application tried to send a message that was larger than IPC could handle. The message was not transmitted.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message    %IPC_RPM-3-UNAVAILABLE: %s 

Explanation    IPC card registered itself to the IPC master twice.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message    %IPC_RPM-3-UNAVAILABLE: %s 

Explanation    The IPC ran out of memory buffers.

Recommended Action    Reduce the number of applications currently running on the IPC. Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message    %IPC_RPM-3-UNAVAILABLE: WARNING: ECC Single Bit Error Correction 

Explanation    A ECC Single Bit Error was detected and corrected.

Recommended Action    Use the command 'debug rpm ecc' to look at the total number of ECC errors since the system was booted. 'debug rpm ecc count' will set the number of ECC errors that will cause a Switch Over.

IPC_RSP_CBUS-3

Error Message    %IPC_RSP_CBUS-3-UNAVAILABLE: %s (%d) 

Explanation    System controller Bengal has reported an error/event

Recommended Action    Read error reports. SBE are generally not fatal. Most others are

Error Message    %IPC_RSP_CBUS-3-UNAVAILABLE: %s (%d) 

Explanation    The ID associated with an IPC card is either missing, duplicated, or cannot be created.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message    %IPC_RSP_CBUS-3-UNAVAILABLE: %s (%d) 

Explanation    The IPC application tried to send a message that was larger than IPC could handle. The message was not transmitted.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message    %IPC_RSP_CBUS-3-UNAVAILABLE: %s 

Explanation    An IPC card has registered itself to the IPC master twice. The card malfunctioned and its IPC is not active.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message    %IPC_RSP_CBUS-3-UNAVAILABLE: %s 

Explanation    The IPC ran out of memory device (MEMD) buffers.

Recommended Action    Reduce the number of applications currently running on the IPC. Copy the error message exactly as it appears, and report it to your technical support representative.

Error Message    %IPC_RSP_CBUS-3-UNAVAILABLE: Hardware queue for card at slot %d not 
found 

Explanation    IPC messages cannot be transmitted due to a missing hardware queue. The messages were discarded, and subsequent messages will not be transmitted to that card.

Recommended Action    Copy the error message exactly as it appears, and report it to your technical support representative.

IP_DEVICE_TRACKING Messages

This section contains switch IP host tracking HA (IP_DEVICE_TRACKING) messages.

IP_DEVICE_TRACKING-4

Error Message    %IP_DEVICE_TRACKING-4-TABLE_LOCK_FAILED: Table already locked by 
process-id [dec]([chars]) 

Explanation    The IP device tracking table could not be updated because of another process holds a lock on the table.

Recommended Action    No action is required.

Error Message    %IP_DEVICE_TRACKING_HA-4-ENTRY_OUT_OF_SYNC: Host mac-address [enet] 
ip-address [IP_address] interface [chars] 

Explanation    An inconsistency has been detected between the active supervisor engine IP device tracking table and the standby supervisor engine IP device tracking table for this host.

Recommended Action    No action is required.

IP_DEVICE_TRACKING_HA-3

Error Message    %IP_DEVICE_TRACKING_HA-3-UNAVAILABLE: %s 

Explanation    A run-time module could not obtain the resources that are required to complete a task. The failure most likely occurred because of a software error or a lack of system memory. Additional details on the nature of the error are specified in the message text on the console or in the system log. The system state between the active and standby units might not be properly synchronized.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IP_DEVICE_TRACKING_HA-3-UNAVAILABLE: Failed to send %s message to 
active for %s, %s 

Explanation    The specified synchronization message, which is an internal IPC message, could not be sent to the active unit in the specified run-time module. The failure most likely occurred because of a software error. Additional details on the nature of the error are specified in the message text on the console or in the system log. The system state between the active and standby units might not be properly synchronized.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IP_DEVICE_TRACKING_HA-4-UNAVAILABLE: Host mac-address %e ip-address 
%i interface %s 

Explanation    An inconsistency has been detected in the IP device tracking table for this host between active and standby

Recommended Action    LOG_STD_NO_ACTION

IPFAST Messages

This section contains IP fast-switching (IPFAST) messages.

IPFAST-2

Error Message    %IPFAST-2-FAILOPENIPCPORT: Could not open the IPC ports. [chars] 

Explanation    The IPFAST process could not open the IPC port to communicate to the line card or route processor.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IPFAST-2-FASTPORTCREATEERR: Attempt to create [chars] failed after 
[dec] retries (last error:[chars]) 

Explanation    The line card attempted to create a port to the route processor but has failed after a few retries. This condition might result in the CEF becoming disabled on the line card.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IPFAST-2-FASTPORTOPEN: Requested to open [chars], id [int] when 
already open. Attempting to re-open. 

Explanation    The line card is attempting to open a port to the route processor when one is already open. This behavior could be transient but might result in multiple ports opened for the same purpose.

Recommended Action    The router should be able to recover from this situation. If CEF problems develop for this line card, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IPFAST-2-FASTPORTOPENERR: Attempt to open [chars] failed after [dec] 
retries (last error:[chars]) 

Explanation    The line card attempted to open a port to the route processor but has failed after a few retries. This condition might result in the CEF becoming disabled on the line card.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IPFAST-2-FASTPORTREGISTERERR: Attempt to register [chars] failed 
after [dec] retries (last error:[chars]) 

Explanation    The line card attempted to register a port to the route processor but has failed after a few retries. This condition might result in the CEF becoming disabled on the line card.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IPFAST-2-INVALSIZE: The IP fast path received an IPC message with an 
invalid size(size/type - [dec]/[dec]) 

Explanation    The IP fast path switching module has received an IPC message with an invalid size.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IPFAST-2-MSGDROP: IPC queue limit is reached and message is dropped. 
queue limit = [dec] cumulative drops = [dec] 

Explanation    The IPC raw queue limit for IP fast path has been reached.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

IPFAST-3

Error Message    %IPFAST-3-UNAVAILABLE: Cache update request at interrupt level: 
%i(%s)-%i(%s) 

Explanation    A programming error occurred.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IPFAST-3-UNAVAILABLE: Found existing %s specific entry %i%m..%m-%i 
(%s) when attempting to create %i%d..%d-%i (%s) 

Explanation    Problems related to the IP route cache triggered this debugging message.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IPFAST-3-UNAVAILABLE: Invalid cache destination %i/%d 

Explanation    The system attempted to add a cache entry for an invalid address.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

IPFAST-4

Error Message    %IPFAST-4-UNAVAILABLE: Attempt to create %s failed. Will be retried %d 
times (last error:%s) 

Explanation    The Linecard is attempting to create a port to the Route processor but has failed. This could be a transient behavior and hence retries will be attempted

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message    %IPFAST-4-UNAVAILABLE: Attempt to open %s failed. Will be retried %d 
times (last error:%s) 

Explanation    The Linecard is attempting to open a port to the Route processor but has failed. This could be a transient behavior and hence retries will be attempted

Recommended Action    The router should be able to recover from this situation. If CEF gets disabled for this line card copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Recommended Action    %IPFAST-4-UNAVAILABLE: Attempt to open the IPC ports failed. %s

Explanation    ipfast failed an attempt to open the ipc port to communicate to the LC/RRP/SP.

Recommended Action    LOG_STD_NO_ACTION

Error Message    %IPFAST-4-UNAVAILABLE: Attempt to register %s failed. Will be retried 
%d times (last error:%s) 

Explanation    The Linecard is attempting to register a port to the Route processor but has failed. This could be a transient behavior and hence retries will be attempted

Recommended Action    The router should be able to recover from this situation. If CEF gets disabled for this line card, copy the error message exactly as it appears and report it to your Cisco technical support representative

Error Message    %IPFAST-4-UNAVAILABLE: Error invalidating IP fast cache due to memory 
shortage 

Explanation    Running short of memory triggered this debugging message. This could result in wrong switching decisions.

Recommended Action    The router memory should be upgraded and if the problem persists copy the error exactly as it appears and report it to your technical support representative.

Error Message    %IPFAST-4-UNAVAILABLE: Error trying to delete prefix entry for %i/%d 
(expected %#x, got %#x) 

Explanation    Problems related to the IP route cache triggered this debugging message.

Recommended Action    The router should correct for this error. If the router cannot forward packets properly or is experiencing other problems, copy the error message exactly as it appears and report it to your Cisco technical support representative.

Error Message    %IPFAST-4-UNAVAILABLE: Error trying to insert prefix entry for %i/%d 
(expected %#x, got %#x) 

Explanation    Problems related to the IP route cache triggered this debugging message.

Recommended Action    The router should correct for this error. If the router cannot forward packets properly or is experiencing other problems, copy the error message exactly as it appears and report it to your Cisco technical support representative.

IPFAST-5

Error Message    %IPFAST-5-SUCCEEDOPENIPCPORT: Attempt to open the IPC ports succeeded. 
[chars] 

Explanation    The IP fast switching has succeeded in an attempt to open the IPC port to communicate with the line card or route processor.

Recommended Action    No action is required.

IPFAST-6

Error Message    %IPFAST-6-UNAVAILABLE: Cache invalidation request for %s 

Explanation    The system is invalidating all cache requests for a given interface.

Recommended Action    LOG_STD_NO_ACTION

Error Message    %IPFAST-6-UNAVAILABLE: Packet too short from %i, datagram size %d, tl 
%d 

Explanation    An IP packet which is too short was received

Recommended Action    LOG_STD_NO_ACTION

IPFLOW-2

Error Message    %IPFLOW-2-UNAVAILABLE: Error initializing Flow Export Template Table 

Explanation    Initialization of the Flow export template table could not be accomplished because of a low memory condition.

Recommended Action    Reduce other system activitiy to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message    %IPFLOW-2-UNAVAILABLE: Error initializing Flow Export queue 

Explanation    Initialization of the Flow export queue could not be accomplished because of a low memory condition.

Recommended Action    Reduce other system activitiy to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message    %IPFLOW-2-UNAVAILABLE: Error initializing Flow background process 

Explanation    Initialization of the Flow background process could not be accomplished because of a low memory condition.

Recommended Action    Reduce other system activitiy to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message    %IPFLOW-2-UNAVAILABLE: Error initializing Flow feature queue 

Explanation    Initialization of the Flow feature queue could not be accomplished because of a low memory condition.

Recommended Action    Reduce other system activitiy to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.

Error Message    %IPFLOW-2-UNAVAILABLE: Error initializing IP flow cache 

Explanation    Initialization of the Flow cache could not be accomplished because of a low memory condition.

Recommended Action    Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information that you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

IPFLOW-3

Error Message    %IPFLOW-3-UNAVAILABLE: NULL 

Explanation    Flow export is disabled because export destination address matches with one of the interface's IP addresses

Recommended Action    IP addresses of all the interfaces must be checked to make sure none of them matches with flow export destination IP address.

IPFLOW-4

Error Message    %IPFLOW-4-UNAVAILABLE: Error creating %s 

Explanation    Version