Cisco Express Forwarding: Command Changes
|
12.2(25)S 12.2(28)SB 12.2(33)SRA 12.2(33)SXH 12.4(20)T
|
In Cisco IOS Releases 12.2(25)S, 12.2(28)SB, 12.2(33)SRA and 12.2(33)SXH, Cisco Express Forwarding has been updated to support new features and new hardware. These updates enable Cisco Express Forwarding to operate with the Multiprotocol Label Switching (MPLS) High Availability (HA) applications and the MPLS Forwarding Infrastructure (MFI).
This feature module details changes to commands that are required to support updates to Cisco Express Forwarding.
In 12.2(25)S, this feature was introduced and supported on the Cisco 7500 series routers.
In 12.2(28)SB, this feature was integrated into Cisco IOS Release 12.2(28)SB and implemented on the Cisco 10000 series routers.
In 12.2(33)SRA, this feature was integrated into Cisco IOS Release 12.2(33)SRA.
In 12.2(33)SXH, this feature was integrated into Cisco IOS Release 12.2(33)SXH.
In 12.4(20)T, this feature was integrated into a Cisco IOS 12.4T release.
The following commands were modified:
cef
table
consistency-check,
clear
adjacency,
clear
cef
linecard,
clear
cef
table,
clear
ip
cef
inconsistency,
debug
adjacency,
debug
cef,
debug
ip
cef,
debug
ip
cef
accounting
non-recursive,
debug
ip
cef
fragmentation,
debug
ip
cef
hash,
debug
ip
cef
subblock,
debug
ip
cef
table,
ip
route-cache,
monitor
event-trace
(EXEC),
monitor
event-trace
(global),
show
adjacency,
show
cef,
show
cef
features
global,
show
cef
interface,
show
ip
cef,
show
ip
cef
adjacency,
show
ip
cef
non-recursive,
show
ip
cef
switching
statistics,
show
ip
cef
tree,
show
ip
cef
unresolved,
show
ip
traffic,
show
monitor
event-trace,
show
xdr.
|