About this Guide
Revised: December 14, 2011, OL-7205-19
Introduction
This preface describes who should read the Cisco Service Control Application for Broadband User Guide, how it is organized, its document conventions, and how to obtain documentation and technical assistance.
This guide assumes a basic familiarity with the concept of the Service Control solution, the Service Control Engine (SCE) platforms, and related components.
Document Revision History
The Document Revision History below records changes to this document.
Table 1 Document Revision History
|
Cisco Service Control
Release and Date
|
|
OL-7205-19 |
3.5.5 December 14, 2011 |
Improved the quality of the user documentation by adding customer and internal feedback. |
OL-7205-18 |
3.5.5 June 07, 2011 |
Updated Managing Subscriber Bandwidth. |
OL-7205-17 |
3.5.5 May 30, 2011 |
Minor correction regarding global controllers. |
OL-7205-16 |
3.5.5 February 14, 2011 |
Updated Table 10-3 "Advanced Service Configuration Properties". Updated Traffic Classification. |
OL-7205-15 |
3.5.5 January 12, 2010 |
Updated How to Install the SCA BB Configuration Utilities section of Chapter 4. |
OL-7205-14 |
3.5.5 December 15, 2009 |
Added the "Easy Definition of Port-Based Protocols" section. Updated Managing Procotols section of Chapter 7. |
OL-7205-13 |
3.5.5 August 11, 2009 |
Corrected the "Anonymous Subscriber Mode" section. Reorganized Chapter 9 "Using the Service Configuration Editor: Traffic Control," to match software tree organization. |
OL-7205-12 |
3.5.5 June 15, 2009 |
Addition of information regarding global controllers. Updated Chapter 4 "Getting Started," Chapter 9 "Using the Service Configuration Editor: Traffic Control," and Chapter 10 "Using the Service Configuration Editor: Additional Options." |
OL-7205-11 |
3.5.0 January, 2009 |
Addition of information regarding traffic mirroring and blacklist URL database. |
OL-7205-10 |
3.1.7 December, 2008 |
Changes to the default configuration. See Managing Advanced Service Configuration Options. |
OL-7205-09 |
3.1.6 July, 2008 |
Minor correction regarding filter rules. |
OL-7205-08 |
3.1.6 May, 2008 |
Minor changes throughout the guide. |
OL-7205-07 |
3.1.5 November, 2007 |
Added the following new features: •Configuration Wizards See: –How to Use the Usage Analysis Wizard –How to Use the P2P Traffic Optimization Wizards –How to Use the Reporter DB Configuration Wizard –How to Configure SCE and CM Devices Using a Wizard •DSCP ToS Classification (ToS is added as a flavor type, see Managing Flavors) •DSCP ToS Marking (see How to Manage DSCP ToS Marker Values) |
OL-7205-05 |
3.1.0 May, 2007 |
Added the following new features: •Virtual Links (see Managing Quotas) •Asymmetric Routing Classification Mode •NetFlow (see NetFlow records) •Quota Replenish Scatter Updated the following sections of the document •Managing Bandwidth •Information About the System Modes •Managing Advanced Service Configuration Options |
OL-7208-04 |
3.0.5 November, 2006 |
Added the following new feature: •The SCA BB Real-Time Monitoring Configuration Utility Updated the following sections of the document •Quick Forwarding (see Filter Rule Actions and Automatic Quick Forwarding of Media Flows) |
OL-7205-03 |
3.0.3 May, 2006 |
Added the following new features: •Hitless Upgrade of the SLI •Content Filtering (see Managing Content Filtering) •The Service Security Dashboard Removed the following deprecated feature: •Attack Filtering and Subscription Notification |
OL-7205-02 |
3.0.0 December, 2005 |
Document name changed to Cisco Service Control Application for Broadband User Guide. Both the look-and-feel and the functionality of the Cisco Service Control Application for Broadband (SCA BB) Console were redesigned for release 3.0. Consequently, this document underwent a major rewrite. The major changes in this document are listed below. •Appendixes B, C, D of the 2.5.5 release user guide were moved to a new document: the Cisco Service Control Application for Broadband Reference Guide. •Chapter 8 and Appendix A of the 2.5.5 release user guide were moved to a new document: the Cisco Service Control Application Suite Reporter User Guide. •The Cisco Service Control Application Suite for Broadband Installation Guide was deprecated; it forms the basis for part of the Getting Started chapter. •Chapter 5 of the 2.5.5 release user guide (Constructing Service Configurations) was completely rewritten and split into three chapters. •New chapters were added for the new tools included in the Console: the Network Navigator tool and the Signature Editor tool. |
OL-7205-01 |
2.5.5 February, 2005 |
First version of this document (then named Cisco Service Control Application Suite for Broadband User Guide). |
Organization
This guide contains the following sections:
Related Publications
Use this Cisco Service Control Application for Broadband User Guide in conjunction with the following Cisco documentation:
•Cisco Service Control Application for Broadband Reference Guide
•Cisco Service Control Application for Broadband Service Configuration API Programmer Guide
•Cisco Service Control Management Suite Collection Manager User Guide
•Cisco Service Control Management Suite Subscriber Manager User Guide
•Cisco Service Control Application Reporter User Guide
•The SCE platform installation and configuration guides:
–Cisco SCE 1000 2xGBE Installation and Configuration Guide
–Cisco SCE 2000 Installation and Configuration Guide
–Cisco SCE8000 10GBE Installation and Configuration Guide
–Cisco SCE8000 GBE Installation and Configuration Guide
•Cisco SCE 2000 and SCE 1000 CLI Command Reference
•Cisco SCE8000 CLI Command Reference
•Cisco SCE 2000 and SCE 1000 Software Configuration Guide
•Cisco SCE8000 10GBE Software Configuration Guide
•Cisco SCE8000 10GBE Software Configuration Guide
Conventions
This document uses the following conventions:
Table 3 Document Conventions
|
|
bold font |
Commands and keywords and user-entered text appear in bold font. |
italic font |
Document titles, new or emphasized terms, and arguments for which you supply values are in italic font. |
[ ] |
Elements in square brackets are optional. |
{x | y | z } |
Required alternative keywords are grouped in braces and separated by vertical bars. |
[ x | y | z ] |
Optional alternative keywords are grouped in brackets and separated by vertical bars. |
string |
A nonquoted set of characters. Do not use quotation marks around the string or the string will include the quotation marks. |
courier font |
Terminal sessions and information the system displays appear in courier font. |
< > |
Nonprinting characters such as passwords are in angle brackets. |
[ ] |
Default responses to system prompts are in square brackets. |
!, # |
An exclamation point (!) or a pound sign (#) at the beginning of a line of code indicates a comment line. |
Note Means reader take note.
Tip Means the following information will help you solve a problem.
Caution
Means
reader be careful. In this situation, you might perform an action that could result in equipment damage or loss of data.
Timesaver Means the described action saves time. You can save time by performing the action described in the paragraph.
|
Warning Means reader be warned. In this situation, you might perform an action that could result in bodily injury.
|
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0.