The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This document describes the features and caveats for all releases of the Cisco RF Gateway 10 Remote Provisioning Utility (RPU-10).
The Cisco IOS-XE Release 3.3.0SQ introduces the Cisco RPU-10. Cisco RPU-10 is a Windows-based tool to simplify the initial provisioning of multiple RF Gateway 10 units in an operator's system.
Cisco RPU-10 is used for mass provisioning of the Cisco DS-48 and Cisco DS-384 line cards on Cisco RF Gateway 10. This provisioning involves setting up a large number of configuration parameters. The configuration parameters are listed in an Microsoft Excel sheet. Cisco RPU-10 application takes the configuration data from Microsoft Excel sheet, generates the equivalent commands for Cisco RF Gateway 10, and sends it to Cisco RF Gateway 10 using Telnet.
Cisco RPU-10 requires 20 MB of hard disk space for installation on a system using Microsoft Windows 7.
Cisco RPU-10 Version |
Cisco IOS-XE Release |
Are these compatible? |
---|---|---|
1.0 |
3.3.0SQ and later releases |
Yes |
Complete the following steps to determine the software version:
Step 1 | Open the Cisco RPU-10 application. |
Step 2 | Click Help and About. |
Version |
Supported Features |
||
---|---|---|---|
1.0 |
|
The Cisco RPU-10 version 1.0 is the first version of this application.
Order the Cisco RPU-10 installation media. The product identifier (PID) for ordering the Cisco RPU-10 application is RFGW-10-RPU. To order, contact your local sales representative or call customer service.
Use the RPU10_Installer_VersionNumber (for example, RPU10_Installer_1.0) file on the installation media for installing the Cisco RPU-10 application. For more information on installing the Cisco RPU-10, see the Cisco RF Gateway 10 Remote Provisioning Utility User Guide.
Complete the following steps to uninstall the Cisco RPU-10 application:
Step 1 | Open the Control Panel . |
Step 2 | Click Uninstall a program in Programs . |
Step 3 | Choose the RPU10_Installer_VersionNumber (for example, RPU10_Installer_1.0 ), and click Uninstall. |
The Cisco RPU-10 version 1.0 does not support the no cable downstream max-carriers command.