The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This guide describes the implementation of the Simple Network Management Protocol (SNMP) and Management Information Base (MIB) for Cisco RF Gateway-10 (RFGW-10).
SNMP provides a set of commands for setting and retrieving the values of operating parameters on the RFGW-10. RFGW-10 information is stored in a virtual storage area called a MIB, which contains many objects that describe RFGW-10 components and provides information about the status of the components. This chapter provides an overview of this guide with the following sections:
This guide contains MIB information of:
For MIB information of later releases, use the Cisco MIB Locater tool.
The following Revision History tables record technical changes, additions, and corrections to this document. The table shows the release number and document revision number for the change, the date of the change, and a brief summary of the change.
|
|
|
|
---|---|---|---|
Updated SCTE-HMS-QAM-MIB |
|||
Updated SCTE-HMS-MPEG-MIB |
|||
Updated SCTE-HMS-MPEG-MIB |
|||
Added DOCS-DRF-MIB |
|||
Updated SCTE-HMS-MPEG-MIB |
This guide is intended for system and network administrators who must configure the RFGW-10 for operation and monitor its performance in the network.
This guide may also be useful for application developers who are developing management applications for the RFGW-10.
This guide contains the following chapters:
For information on obtaining documentation, using the Cisco Bug Search Tool (BST), submitting a service request, and gathering additional information, see What’s New in Cisco Product Documentation at: http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html.
Subscribe to What’s New in Cisco Product Documentation, which lists all new and revised Cisco technical documentation, as an RSS feed and deliver content directly to your desktop using a reader application. The RSS feeds are a free service.