System Requirements
These sections describe the system requirements for Cisco IOS XE Fuji 16.8.x:
Memory Requirements
The following table displays the memory recommendations for the Cisco cBR Series Converged Broadband Routers with Cisco IOS XE Release 16.8.1e feature sets.
Feature Set |
Cisco cBR Route Processor |
Software Image |
Recommended Flash Memory |
Recommended DRAM Memory |
Runs From |
---|---|---|---|---|---|
CISCO IOS-XE universalk9 |
Cisco cBR8 (CBR) Processor |
cbrsup-universalk9.16.08.01e.SPA.bin |
8G |
48G |
Bootflash: |
CISCO IOS-XE CLC K9 |
Cisco cBR8 (CYLONS) Processor |
cbrsup-universalk9.16.08.01e.SPA.bin |
8G |
16G |
Supervisor |
The following table displays the memory recommendations for the Cisco cBR Series Converged Broadband Routers with Cisco IOS XE Release 16.8.1d feature sets.
Feature Set |
Cisco cBR Route Processor |
Software Image |
Recommended Flash Memory |
Recommended DRAM Memory |
Runs From |
---|---|---|---|---|---|
CISCO IOS-XE universalk9 |
Cisco cBR8 (CBR) Processor |
cbrsup-universalk9.16.08.01d.SPA.bin |
8G |
48G |
Bootflash: |
CISCO IOS-XE CLC K9 |
Cisco cBR8 (CYLONS) Processor |
cbrsup-universalk9.16.08.01d.SPA.bin |
8G |
16G |
Supervisor |
The following table displays the memory recommendations for the Cisco cBR Series Converged Broadband Routers with Cisco IOS XE Release 16.8.1 feature sets.
Feature Set |
Cisco cBR Route Processor |
Software Image |
Recommended Flash Memory |
Recommended DRAM Memory |
Runs From |
---|---|---|---|---|---|
CISCO IOS-XE universalk9 |
Cisco cBR8 (CBR) Processor |
cbrsup-universalk9.16.08.01.SPA.bin |
8G |
48G |
Bootflash: |
CISCO IOS-XE CLC K9 |
Cisco cBR8 (CYLONS) Processor |
cbrsup-universalk9.16.08.01.SPA.bin |
8G |
16G |
Supervisor |
Hardware Supported
For detailed information about the hardware supported in Cisco IOS XE Release 16.8.x and its maintenance releases, see:
http://www.cisco.com/c/en/us/td/docs/cable/cbr/installation/guide/b_cbr_how_and_what_to_order.html.
Note |
The Cisco cBR chassis must house line cards with either Downstream DOCSIS 3.0 PHY modules or Downstream DOCSIS 3.1 PHY modules. Mixed configuration is not supported. |
Determining the Software Version for Cisco IOS XE Fuji 16.8.1e
To determine the version of the Cisco IOS XE software running on your Cisco cBR Series Converged Broadband Routers, , log in and enter the show version EXEC command:
Router#show version
Cisco IOS XE Software, Version 16.08.01e
Cisco IOS Software [Fuji], cBR Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 16.8.1e, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2018 by Cisco Systems, Inc.
Compiled Wed 28-Nov-18 20:49 by mcpre
Cisco IOS-XE software, Copyright (c) 2005-2018 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
ROM: IOS-XE ROMMON
CST-CBR8-Hongkong uptime is 10 minutes
Uptime for this control processor is 16 minutes
System returned to ROM by reload at 15:11:13 CST Wed Dec 12 2018
System restarted at 15:19:30 CST Wed Dec 12 2018
System image file is "harddisk:cbrsup-universalk9.16.08.01e.SPA.bin"
Last reload reason: Reload Command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Cisco cBR-8 (CBR) processor (revision CBRVE) with 11398169K/6147K bytes of memory.
Processor board ID FXS17440AT5
16 Ten Gigabit Ethernet interfaces
4 Hundred Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
50331648K bytes of physical memory.
7649279K bytes of eUSB flash at bootflash:.
117155287K bytes of SATA hard disk at harddisk:.
0K bytes of WebUI ODM Files at webui:.
Configuration register is 0x2
Determining the Software Version for Cisco IOS XE Fuji 16.8.1d
To determine the version of the Cisco IOS XE software running on your Cisco cBR Series Converged Broadband Routers, , log in and enter the show version EXEC command:
Router#show versionLoad for five secs: 100%/0%; one minute: 9%; five minutes: 1%
Time source is NTP, *13:02:37.069 PDT Thu Feb 14 2019
Cisco IOS XE Software, Version 16.08.01d
Cisco IOS Software [Fuji], cBR Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 16.8.1d, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2018 by Cisco Systems, Inc.
Compiled Tue 11-Sep-18 20:15 by mcpre
Cisco IOS-XE software, Copyright (c) 2005-2018 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
ROM: IOS-XE ROMMON
Galaxy uptime is 2 minutes
Uptime for this control processor is 7 minutes
System returned to ROM by reload at 12:51:36 PDT Thu Feb 14 2019
System image file is "harddisk:cbrsup-universalk9.16.08.01d.SPA.bin"
Last reload reason: Reload Command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Cisco cBR-8 (CBR) processor (revision CBR) with 8468493K/6147K bytes of memory.
Processor board ID FXS1921Q1XR
16 Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
50331648K bytes of physical memory.
7743487K bytes of eUSB flash at bootflash:.
97620247K bytes of SATA hard disk at harddisk:.
30659088K bytes of USB flash at usb0:.
0K bytes of WebUI ODM Files at webui:.
Configuration register is 0x0
Determining the Software Version for Cisco IOS XE Fuji 16.8.1
To determine the version of the Cisco IOS XE software running on your Cisco cBR Series Converged Broadband Routers, , log in and enter the show version EXEC command:
Router#show ver
Load for five secs: 32%/0%; one minute: 12%; five minutes: 2%
No time source, *15:53:06.437 CST Thu Mar 29 2018
Cisco IOS XE Software, Version 16.08.01
Cisco IOS Software [Fuji], cBR Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 16.8.1, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2018 by Cisco Systems, Inc.
Compiled Tue 27-Mar-18 13:31 by mcpre
Cisco IOS-XE software, Copyright (c) 2005-2018 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
ROM: IOS-XE ROMMON
RphyNode-L09 uptime is 1 minute
Uptime for this control processor is 6 minutes
System returned to ROM by reload at 15:43:25 CST Thu Mar 29 2018
System image file is "harddisk:cbrsup-universalk9.16.08.01.SPA.bin"
Last reload reason: Reload Command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Cisco cBR-8 (CBR) processor (revision CBR) with 7492070K/6147K bytes of memory.
Processor board ID FXS2011Q09U
48 Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
50331648K bytes of physical memory.
7649279K bytes of eUSB flash at bootflash:.
117155287K bytes of SATA hard disk at harddisk:.
0K bytes of WebUI ODM Files at webui:.
Configuration register is 0x0
Microcode Software
This section describes microcode software that is supported for the Cisco cBR Series Converged Broadband Routers.
For more information, see Upgrading the Cisco cBR Series Converged Broadband Routers for Cisco IOS XE Fuji 16.8.x.
Feature Support
Cisco IOS XE software is packaged in feature sets that consist of software images that support specific platforms. The feature sets available for a specific platform depend on which Cisco IOS XE software images are included in a release. Each feature set contains a specific set of Cisco IOS XE features.
Caution |
Cisco IOS XE images with strong encryption (including, but not limited to 168-bit [3DES] data encryption feature sets) are subject to U.S. government export controls and have limited distribution. Strong encryption images to be installed outside the United States are likely to require an export license. Customer orders may be denied or subject to delay because of U.S. government regulations. When applicable, the purchaser or user must obtain local import and use authorizations for all encryption strengths. Please contact your sales representative or distributor for more information, or send an e-mail to export@cisco.com. |