The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
A
AC power
specifications A-1
altitude
guidelines B-2
C
cabling requirements
inline network adapter 5-7
inline network adapter (examples) 5-9
connections
power 3-7
troubleshooting 6-2
connectors and ports
Interface Module 5-4
Interface Module module 5-6
locations 1-4
console port 1-4
corrosion
preventing damage B-3
cover
removing 4-2
D
DC power
installation precautions 2-5
dust
preventing damage B-3
E
electromagnetic interference
electrostatic discharge
EMI
preventing effects of B-3
environment
maintaining B-1
ESD
Ethernet controller
troubleshooting 6-3
troubleshooting (chart) 6-3
Ethernet port
connector pinouts 1-4
F
front panel
figure 1-2
LEDs 1-3
H
hardware
troubleshooting 6-1
hardware option
problems 6-7
humidity
maintenance guidelines B-2
I
I/O connectors 1-3
inline network adapter
cabling examples 5-9
cabling requirements 5-7
installation
warnings 2-1
Interface Module
description 5-1
specifications A-2
intermittent problems
troubleshooting 6-6
L
LEDs
checking 3-8
description 1-3
front panel (table) 1-3
line conditioners
using B-5
M
magnetism
preventing effects of B-4
memory
problems 6-7
N
network
connection problems 6-3
removing WAVE from 3-8
P
ports
serial 1-4
power
connecting to system 3-7
problems 6-7
power source interruptions
preventing damage from B-4
power supplies
using uninterruptible B-6
problem solving
overview 6-1
tips 6-5
R
radio frequency interference
removing or replacing WAVE 3-8
RFI
preventing effects of B-3
S
safety
general precautions 2-4
warnings 2-1
serial port
description 1-4
problems 6-8
shock
preventing damage B-4
site environment
maintenance factors B-1
surge protectors
using B-5
switches
troubleshooting 6-2
system problems
identifying 6-1
system reliability 2-5
T
temperature
maintenance guidelines B-2
troubleshooting
connections 6-2
Ethernet controller 6-3
network connections 6-3
switches 6-2
system hardware 6-1
undetermined problems 6-4
U
undetermined problems
troubleshooting 6-4
uninterruptible power supplies
using B-6
V
vibration
preventing damage B-4
W
warnings
installation 2-1
WAVE
installing 3-2
maintaining B-1
removing or replacing 3-8