elPTADAOIMProgress
|
A long value that contains the number of bytes of traffic that were passed through while auto discovery of application optimizers
was in progress.
|
elPTADAOIncompatible
|
A long value that contains the number of bytes of traffic that were passed through because of auto discovery of application
optimizers revealed an incompatibility.
|
elPTADVersionMismatch
|
A long value that contains the number of bytes of traffic that were passed through due to an auto discovery version mismatch.
|
elPTAppConfig
|
A long value that contains the number of bytes of traffic that were passed through because the application is configured as
pass-through.
|
elPTAppNavInProgress
|
A long value that contains the aggregrate number of ANC traffic, in bytes, that was passed through because the controller
did not see the connection during setup (syn/syn-ack).
This typically occurs if the controller is inserted into the network while connections are active.
|
elPTAppNavInterceptACL
|
A long value that contains the number of bytes of traffic that were passed through because an intercept ACL was configured
with deny statements matched by these connections.
|
elPTAppNavPolicy
|
A long value that contains the number of bytes of traffic that were passed through due to policy settings.
|
elPTAppOverride
|
A long value that contains the number of bytes of traffic that were passed through because the internal application explicitly
requested that the connection not be optimized.
This value only includes connections that would have otherwise been optimized.
|
elPTAsymmetric
|
A long value that contains the number of bytes of traffic that were passed through due to the WAE only seeing one side of
the TCP connection (where the src is the client and the dst is the server).
|
elPTBadADOptions
|
A long value that contains the number of bytes of traffic that were passed through due to incorrect auto discovery options.
|
elPTDegraded
|
A long value that contains the number of bytes of traffic that were passed through because the cluster has degraded.
|
elPTDMVersionMismatch
|
A long value that contains the number of bytes of traffic that were passed through due a version mismatch.
|
elPTFlowLearnFail
|
A long value that contains the number of bytes of traffic that were passed through due to a query failure because the owner
could not be determined.
This indicates an interception problem; ANCs may not be positioned at all entry/exit points in the network.
|
elPTFlowQueryFail
|
A long value that contains the number of bytes of traffic that were passed through because the ANC sees the synack but does
not see the syn packet, which is possibly tdue to assymetric setup.
This indicates an interception problem; ANCs may not be positioned at all entry and exit points in the network.
|
elPTGlobalConfig
|
A long value that contains the global aggregate number of of bytes of traffic that were passed through because the application
is configured as pass-through.
|
elPTInProgress
|
A long value that contains the number of bytes of traffic that were passed through because the controller did not see the
connection during setup (syn/syn-ack).
This typically occurs if the controller is inserted into the network while connections are active.
|
elPTIntermediate
|
A long value that contains the number of bytes of traffic that were passed through due to the WAE being in the middle of the
best local and remote WAE's (relative to the client and server).
|
elPTInternalError
|
A long value that contains the number of bytes of traffic that were passed through due to an internal error during processing
in the policy engine.
|
elPTIPFragUnSuppoPeer
|
A long value that contains the number of bytes of traffic that were passed through because the peer device is running older
software that does not support optimization of fragmented data packets.
|
elPTNon_optimizingPeer
|
A long value that contains the number of bytes of traffic that were passed through because the only peer found is a serially
clustered peer and optimization is disabled to the peer.
|
elPTNoPeer
|
A long value that contains the number of bytes of traffic that were passed through due to no peer WAE being found during TFO
auto-discovery.
|
elPTOverload
|
A long value that contains the number of bytes of traffic that were passed through because the application is overloaded.
New connections not handled by an application accelerator are configured as pass-through.
|
elPTPeerOverride
|
A long value that contains the number of bytes of traffic that were passed through because the peer.
|
elPTRjctCapabilities
|
A long value that contains the number of bytes of traffic that were passed through due to auto discovery finding that the
peer WAE does not have the required capabilities
|
elPTRjctNoLicense
|
A long value that contains the number of bytes of traffic that were passed through because the WN is not licensed.
|
elPTRjctResources
|
A long value that contains the number of bytes of traffic that were passed through due to due to auto discovery finding that
the peer WAE does not have the required resources
|
elPTServerBlackList
|
A long value that contains the number of bytes of traffic that were passed through because the server is on the TFO blocked
list as not supporting TCP Option (0x21) being present in the SYN packet.
|
elPTTCPTotal
|
A long value that contains the aggregate number of bytes of traffic that were passed through for any reason.
|
elPTWNAppNavMember
|
A long value that contains the number of bytes of traffic that were passed through because the originating and terminating
connections are in the same AppNav cluster.
|
elPTWNGOverload
|
A long value that contains the number of bytes of traffic that were passed through because all WNs in the WNG were unavailable
to service new connections.
|
elPTWNInterceptionACL
|
A long value that contains the number of bytes of traffic that were passed through because an intercept ACL was configured
for a WN with deny statements matched by these connections.
|
elPTWNOffload
|
A long value that contains the number of bytes of traffic that were passed through as a result of the following scenario:
the WN decided to pass the connection through and to offload the pass through to the ANC.
|
elUnknown
|
A long value that contains the number of bytes of traffic that were passed through due for unknown reasons. This typically
happens if the WN decides to pass the connection through for a reason that cannot be determined by the controller.
|
endtime
|
A dateTime value that contains the end time.
|
frequency
|
A string value that describes the frequency.
|
name
|
The name of the ANC.
|
starttime
|
A dateTime value that contains the start time.
|