The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This document describes the tasks involved in setting up and maintaining the Cisco Vision Dynamic Signage Director and Cisco Vision Dynamic Signage Director Remote servers.
The content is intended for Cisco Vision system administrators and technical field engineers who are responsible for designing and deploying Cisco Vision solutions. It is expected that readers of this document are familiar with basic IP networking and Linux.
Table 1 lists the technical changes made to this document since it was first published.
|
|
---|---|
|
|
|
■New capabilities introduced in Release 5.0.0-526 (SP2) for the Venue Administrator in User Management in Cisco Vision Dynamic Signage Director. ■Added Caution in Prerequisites for Backing Up and Restoring Cisco Vision Dynamic Signage Director Servers for maintenance fix required before any upgrade from release 4.1 systems or releases prior to 5.0 SP2, where imported logos as channel icons are not backed up (the channel icons will disappear during the upgrade procedure of backing up the primary and restoring to secondary if the icons are not already on the secondary server). ■New TUI option for Disk Speed Test under Troubleshooting > Disk Monitoring menu in Figure 1. |
|
|
|
|
|
|
---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For more information about Cisco Vision hardware and software installation, configuration, and operation, see the Cisco Vision documentation available on Cisco.com at:
www.cisco.com/go/stadiumvisiondocs
For more details, see the “Related Documentation and Resources” topic in the Release Notes for Cisco Vision Dynamic Signage Director Release 5.0 .