Guest

Gateway Protocols

E&M Cable Pinouts Connecting Cisco 1750/2600/3600 E&M VIC to Lucent PBX G3R E&M Trunk

Cisco - E&M Cable Pinouts Connecting Cisco 1750/2600/3600 E&M VIC to Lucent PBX G3R E&M Trunk

Document ID: 8635

Updated: Feb 02, 2006

   Print

Introduction

This document describes the E&M Cable Pinouts connecting a Cisco 1750/2600/3600 E&M voice interface card (VIC) to a Lucent PBX G3R E&M Trunk.

Prerequisites

Requirements

There are no specific requirements for this document.

Components Used

This document is not restricted to specific software and hardware versions.

Conventions

For more information on document conventions, see the Cisco Technical Tips Conventions.

Pinout

Note: Lucent G3R PBX ty1-stan and ty5 interoperate with Cisco 1750/2600/3600 E&M VIC.

Type 1 & 5; 4-wires; router to PBX -----Lucent-----
Router  Pins 	  PBX
        1 --
   M    2 -- 6    M
   R    3 -- 4    TA
  R1    4 -- 1    RA
  T1    5 -- 2    RB
   T    6 -- 5    TB
   E    7 -- 3    E
        8 --      

Related Information

Updated: Feb 02, 2006
Document ID: 8635