Setting-Up an NTP Server on SPA3102
How to set the NTP server on SPA3102?
This article is one in a series to assist in the setup, troubleshooting, and maintenance of Cisco Small Business products.
Q. How to set the NTP server on SPA3102?
Set up an NTP Server on SPA3102
Access the SPA3102's web-based setup page. For instructions, click here.
When the web-based setup page appears, click Admin Login.
Click Wan Setup, then advanced.
Under Primary NTP Server, enter the NTP server address on the field provided.
Was this Document Helpful?
© 2015 Cisco and/or its affiliates. All rights reserved.