Accessing the SPA2100's Interactive Voice Response (IVR) Menu
Accessing the SPA2100 Interactive Voice Response (IVR) Menu
This article is one in a series to assist in the setup, troubleshooting, and maintenance of Cisco Small Business products.
Q. Accessing the SPA2100 Interactive Voice Response (IVR) Menu
In order to access the Interactive Voice Response (IVR) menu, complete these steps:
Dial **** on the analog phone attached to the SPA2100.
When you hear the voice prompt, dial the corresponding IVR menu code/number followed by the pound (#) key.
In order to check the SPA2100's current WAN IP address, pick up the phone attached to the SPA unit and dial ****110#.
Note: Here is the list of IVR menu codes:
Note: If the Administrator password is not set or the user is allowed to change it, the items marked with Requires Password will not require a password.
Was this Document Helpful?
This Document Applies to These Products
© 2016 Cisco and/or its affiliates. All rights reserved.