What is the Difference between Yellow and White Labeled Ports on a Nexus 2300 Series FEX?

Available Languages

Download Options

  • PDF     (72.1 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (142.0 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (137.0 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:March 6, 2018
Document ID:212838

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

    Introduction

    This document describes port type information of Nexus 2300 series FEX.

      

    Prerequisites

    Requirements

    There are no specific requirements for this document.

    Components Used

    The information in this document is based on these hardware platforms:

    • Cisco Nexus 2348UPQ 10GE
    • Cisco Nexus 2332TQ 10GE

    The same applies toCisco Nexus 2348TQ 10GE and Cisco Nexus 2348TQ-E 10GE FEX.

      

    The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, ensure that you understand the potential impact of any command.

    What is the Difference between Yellow and White Labeled Ports on a Nexus 2300 Series FEX?

    The Cisco Nexus 2300 platform provides two types of ports: ports for end-host attachment (host interfaces) and uplink ports (fabric interfaces). Both yellow and white colored fabric interfaces can be used to provide connectivity to the upstream parent Cisco Nexus switch. There is no difference between yellow labeled and white labeled uplink ports. 

    TAC Authored

    Contributed by Cisco Engineers

    • Charles Wei Shao
      Cisco TAC Engineer

    Was this Document Helpful?

    FeedbackFeedback

    Contact Cisco

    This Document Applies to These Products