Cisco Small Business Network Storage Systems

Configuring the Network Link IP of the NSS2050

Document ID: 109517

Updated: Jan 26, 2009



This article is one in a series to assist in the setup, troubleshooting, and maintenance of Cisco Small Business products (formerly Linksys Business Series).

Q. How do I configure the Network Link IP of the NSS2050?


Step 1:
From the Manager Menu, click Network IP.
The Network IP page appears listing each interface.

Step 2:
Click Edit on the row of the interface you want to configure.
The Network Link Configuration page appears.

Step 3:
Select one of the following:

  • Obtain IP Address Automatically: Use a DHCP server to retrieve the IP address,
    netmask, and gateway address for the interface.
  • Use the Following IP Address: Enter the IP configuration details manually for the IP
    address, netmask, and gateway, in dotted-quad notation (i.e., set of four digits
    separated by periods where each digit is in the range of 0-255).

Step 4:
Click Update for settings to take effect.

Related Information

Updated: Jan 26, 2009
Document ID: 109517