Guest

Cisco Small Business Network Storage Systems

Configuring the Network Link IP of the NSS2000

Document ID: 109526

Updated: Jan 26, 2009

   Print

Introduction

This article is one in a series to assist in the setup, troubleshooting, and maintenance of Cisco Small Business products (formerly Linksys Business Series).

Q. How do I configure the Network Link IP of the NSS2000?

A.

Step 1:
From the Manager Menu, click Network IP.
The Network IP page appears listing each interface.



Step 2:
Click Edit on the row of the interface you want to configure.
The Network Link Configuration page appears.

Step 3:

Select one of the following:

  • Obtain IP Address Automatically: Use a DHCP server to retrieve the IP address,
    netmask, and gateway address for the interface.
  • Use the Following IP Address: Enter the IP configuration details manually for the IP
    address, netmask, and gateway, in dotted-quad notation (i.e., set of four digits
    separated by periods where each digit is in the range of 0-255).

Step 4:

Click Update for settings to take effect.

Related Information

Updated: Jan 26, 2009
Document ID: 109526