There are no specific requirements for this document.
This document is not restricted to specific software or hardware versions, but Cisco IOS?? software with the IBM Feature Set is required to run DLSw in Cisco Routers.
The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.
For more information on document conventions, refer to the Cisco Technical Tips Conventions.
This document provides troubleshooting techniques and solutions to the most common data-link switching (DLSw) issues. Navigate this flow chart to locate where a problem resides.
Click any of the green rectangles to view detailed information about that step in the flowchart.