Field Notice: FN - 72441 - Oplink Transceivers Version 3 Are Not Qualified and Supported - Configuration Change Recommended

Notice

THIS FIELD NOTICE IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTY OF MERCHANTABILITY. YOUR USE OF THE INFORMATION ON THE FIELD NOTICE OR MATERIALS LINKED FROM THE FIELD NOTICE IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS FIELD NOTICE AT ANY TIME.

Revision History

Revision	Publish Date	Comments
1.2	16-Dec-22	Updated the Workaround/Solution Section
1.1	08-Sep-22	Updated the Title
1.0	25-Aug-22	Initial Release

Products Affected

Affected Product ID	Comments
N3K-C3172PQ-10GE
N3K-C3172PQ-10GE=	Part Alternate
N3K-C3548P-10G
N3K-C3548P-10G=	Part Alternate

Defect Information

Defect ID	Headline
CSCwc08268	Nexus all (N3K/N9K) GLC-GE-100FX V03 Transceiver Compatibility

Problem Description

All Nexus PIDs that support 100M port speed, as listed in the Products Affected section, might experience an issue with the GLC-GE-100FX V03 transceiver. The link will come up, but traffic will not flow in either direction.

Background

The Oplink GLC-GE-100FX V03 transceiver has not been qualified as supported with Nexus Product IDs (PIDs).

Problem Symptom

The link/interface is up, but traffic does not flow.

Workaround/Solution

There is no workaround. These optics should not be used on this product.

For More Information

If you require further assistance, or if you have any further questions regarding this field notice, please contact the Cisco Systems Technical Assistance Center (TAC) by one of the following methods:

• Open a service request on Cisco.com
• By email or telephone

Receive Email Notification For New Field Notices

My Notifications—Set up a profile to receive email updates about reliability, safety, network security, and end-of-sale issues for the Cisco products you specify.