Cisco Security Advisory
Click Icon to Copy Verbose Score
CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:N/I:N/A:H/E:X/RL:X/RC:X
-
A vulnerability in Cisco Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) Mode could allow an unauthenticated, remote attacker to cause a queue wedge on a leaf switch, which could result in critical control plane traffic to the device being dropped. This could result in one or more leaf switches being removed from the fabric.
This vulnerability is due to mishandling of ingress TCP traffic to a specific port. An attacker could exploit this vulnerability by sending a stream of TCP packets to a specific port on a Switched Virtual Interface (SVI) configured on the device. A successful exploit could allow the attacker to cause a specific packet queue to queue network buffers but never process them, leading to an eventual queue wedge. This could cause control plane traffic to be dropped, resulting in a denial of service (DoS) condition where the leaf switches are unavailable.
Note: This vulnerability requires a manual intervention to power-cycle the device to recover.
Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.
This advisory is available at the following link:
https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-n9kaci-queue-wedge-cLDDEfKFThis advisory is part of the August 2021 Cisco FXOS and NX-OS Software Security Advisory Bundled Publication. For a complete list of the advisories and links to them, see Cisco Event Response: August 2021 Cisco FXOS and NX-OS Software Security Advisory Bundled Publication.
-
Vulnerable Products
This vulnerability affects Cisco Nexus 9000 Series Fabric Switches in ACI mode that are Generation 1 models. The list of leaf switches that are Generation 1 models and are considered vulnerable is as follows:
- N9K-C9372PX-E
- N9K-C9372TX-E
- N9K-C9332PQ
- N9K-C9372PX
- N9K-C9372TX
- N9K-C9396PX
- N9K-C9396TX
- N9K-C93128TX
- N9K-C93120TX
Determine the Device Model
The administrator can issue the show model command at the CLI to determine the presence of Generation 1 switches. In this example, the model N9K-C9396PX is Generation 1, so the device is considered vulnerable.
nxosaci# show model
Mod Ports Module-Type Model Status --- ----- ------------------------------ ------------------ ---------- 1 60 1/10G Ethernet Module N9K-C9396PX active *The Cisco Nexus 9000 Series Fabric Switches in ACI mode that are Generation 1 are no longer supported as of software Release 15.0(1). See Cisco Nexus 9000 ACI-Mode Switches Release Notes, Release 15.0(1) for additional information.
Products Confirmed Not Vulnerable
Only products listed in the Vulnerable Products section of this advisory are known to be affected by this vulnerability.
Cisco has confirmed that this vulnerability does not affect the following Cisco products:
- Firepower 1000 Series
- Firepower 2100 Series
- Firepower 4100 Series
- Firepower 9300 Security Appliances
- MDS 9000 Series Multilayer Switches
- Nexus 1000 Virtual Edge for VMware vSphere
- Nexus 1000V Switch for Microsoft Hyper-V
- Nexus 1000V Switch for VMware vSphere
- Nexus 3000 Series Switches
- Nexus 5500 Platform Switches
- Nexus 5600 Platform Switches
- Nexus 6000 Series Switches
- Nexus 7000 Series Switches
- Nexus 9000 Series Fabric Switches in ACI mode (Generation 2 models only)
- Nexus 9000 Series Switches in standalone NX-OS mode
- UCS 6200 Series Fabric Interconnects
- UCS 6300 Series Fabric Interconnects
- UCS 6400 Series Fabric Interconnects
-
There are no workarounds that address this vulnerability.
A possible mitigation for this vulnerability is available for customers who cannot upgrade to a fixed release; however, it does not persist after each reload but can be used as a stopgap measure until the device can be upgraded. To coordinate implementation of the mitigation, contact the Cisco Technical Assistance Center (TAC).
While this mitigation has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.
-
Cisco has released free software updates that address the vulnerability described in this advisory. Customers may only install and expect support for software versions and feature sets for which they have purchased a license. By installing, downloading, accessing, or otherwise using such software upgrades, customers agree to follow the terms of the Cisco software license:
https://www.cisco.com/c/en/us/products/end-user-license-agreement.htmlAdditionally, customers may only download software for which they have a valid license, procured from Cisco directly, or through a Cisco authorized reseller or partner. In most cases this will be a maintenance upgrade to software that was previously purchased. Free security software updates do not entitle customers to a new software license, additional software feature sets, or major revision upgrades.
When considering software upgrades, customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories page, to determine exposure and a complete upgrade solution.
In all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.
Customers Without Service Contracts
Customers who purchase directly from Cisco but do not hold a Cisco service contract and customers who make purchases through third-party vendors but are unsuccessful in obtaining fixed software through their point of sale should obtain upgrades by contacting the Cisco TAC: https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html
Customers should have the product serial number available and be prepared to provide the URL of this advisory as evidence of entitlement to a free upgrade.
Cisco NX-OS Software
To help customers determine their exposure to vulnerabilities in Cisco NX-OS Software, Cisco provides the Cisco Software Checker to identify any Cisco Security Advisories that impact a specific Cisco NX-OS Software release and the earliest release that fixes the vulnerabilities that are described in each advisory (“First Fixed”). If applicable, the tool also returns the earliest release that fixes all the vulnerabilities described in all the advisories identified (“Combined First Fixed”).
Customers can use the Cisco Software Checker to search advisories in the following ways:
- Choose the software, platform, and one or more releases
- Upload a .txt file that includes a list of specific releases
- Enter the output of the show version command
After initiating a search, customers can customize the search to include all Cisco Security Advisories or one or more specific advisories.
Customers can also use the following form to determine whether a release is affected by any Cisco Security Advisory by choosing the Cisco NX-OS Software and platform and then entering a release—for example, 7.0(3)I7(5) for Cisco Nexus 3000 Series Switches or 14.0(1h) for Cisco NX-OS Software in ACI mode:
By default, the Cisco Software Checker includes results only for vulnerabilities that have a Critical or High Security Impact Rating (SIR). To include results for Medium SIR vulnerabilities, customers can use the Cisco Software Checker and check the Medium check box in the drop-down list under Impact Rating when customizing a search.
Additional Resources
For help determining the best Cisco NX-OS Software release for a Cisco Nexus Switch, see the following Recommended Releases documents. If a security advisory recommends a later release, Cisco recommends following the advisory guidance.
Cisco MDS Series Switches
Cisco Nexus 1000V for VMware Switch
Cisco Nexus 3000 Series Switches
Cisco Nexus 5500 Platform Switches
Cisco Nexus 5600 Platform Switches
Cisco Nexus 6000 Series Switches
Cisco Nexus 7000 Series Switches
Cisco Nexus 9000 Series Switches
Cisco Nexus 9000 Series ACI-Mode SwitchesTo determine the best release for Cisco UCS Software, see the Recommended Releases documents in the release notes for the device.
-
The Cisco Product Security Incident Response Team (PSIRT) is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory.
-
This vulnerability was found during the resolution of a Cisco TAC support case.
-
To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.
-
Show LessVersion Description Section Status Date 1.0 Initial public release. — Final 2021-AUG-25
-
THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.
A standalone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy and may lack important information or contain factual errors. The information in this document is intended for end users of Cisco products.