Cisco Security Advisory
Click Icon to Copy Verbose Score
CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:N/I:N/A:H/E:X/RL:X/RC:X
-
Multiple vulnerabilities in Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.
These vulnerabilities are due to lack of proper input validation of the HTTPS request. An attacker could exploit these vulnerabilities by sending a crafted HTTPS request to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition.
Note: This vulnerability affects only specific AnyConnect and WebVPN configurations. For more information, see the Vulnerable Products section.
Cisco has released software updates that address these vulnerabilities. There are no workarounds that address these vulnerabilities.
This advisory is available at the following link:
https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-asa-ftd-vpn-dos-fpBcpEcDThis advisory is part of the April 2021 Cisco ASA, FMC, and FTD Software Security Advisory Bundled Publication. For a complete list of the advisories and links to them, see Cisco Event Response: April 2021 Cisco ASA, FMC, and FTD Software Security Advisory Bundled Publication.
-
Vulnerable Products
These vulnerabilities affect Cisco devices if they are running a vulnerable release of Cisco ASA Software or Cisco FTD Software and are configured for termination of AnyConnect VPN Client connections.
For information about which Cisco software releases are vulnerable, see the Fixed Software section of this advisory.
ASA Software
In the following table, the left column lists the Cisco ASA features that are vulnerable. The right column indicates the basic configuration for the feature from the show running-config CLI command. If the device is configured for one of these features, it is vulnerable.
Cisco ASA Feature Vulnerable Configuration AnyConnect IKEv2 Remote Access (with client services) crypto ikev2 enable <interface_name> client-services port <port #>
AnyConnect SSL VPN webvpn
enable <interface_name>FTD Software
In the following table, the left column lists the Cisco FTD features that are vulnerable. The right column indicates the basic configuration for the feature from the show running-config CLI command. If the device is configured for one of these features, it is vulnerable.
Cisco FTD Feature Vulnerable Configuration AnyConnect IKEv2 Remote Access (with client services)1,2 crypto ikev2 enable <interface_name> client-services port <port #>
AnyConnect SSL VPN1,2 webvpn
enable <interface_name>1. Remote Access VPN features are enabled through Devices > VPN > Remote Access in the Cisco Firepower Management Center (FMC) or through Device > Remote Access VPN in Cisco Firepower Device Manager (FDM).
2. Remote Access VPN features were first supported as of Cisco FTD Software Release 6.2.2.Products Confirmed Not Vulnerable
Only products listed in the Vulnerable Products section of this advisory are known to be affected by these vulnerabilities.
Cisco has confirmed that these vulnerabilities do not affect Cisco Firepower Management Center (FMC) Software and web browser-based VPN connections.
-
There are no workarounds that address these vulnerabilities.
-
Cisco has released free software updates that address the vulnerabilities described in this advisory. Customers may only install and expect support for software versions and feature sets for which they have purchased a license. By installing, downloading, accessing, or otherwise using such software upgrades, customers agree to follow the terms of the Cisco software license:
https://www.cisco.com/c/en/us/products/end-user-license-agreement.htmlAdditionally, customers may only download software for which they have a valid license, procured from Cisco directly, or through a Cisco authorized reseller or partner. In most cases this will be a maintenance upgrade to software that was previously purchased. Free security software updates do not entitle customers to a new software license, additional software feature sets, or major revision upgrades.
When considering software upgrades, customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories page, to determine exposure and a complete upgrade solution.
In all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.
Customers Without Service Contracts
Customers who purchase directly from Cisco but do not hold a Cisco service contract and customers who make purchases through third-party vendors but are unsuccessful in obtaining fixed software through their point of sale should obtain upgrades by contacting the Cisco TAC: https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html
Customers should have the product serial number available and be prepared to provide the URL of this advisory as evidence of entitlement to a free upgrade.
Fixed Releases
In the following table(s), the left column lists Cisco software releases. The second and third columns indicate whether a release is affected by the vulnerabilities described in this advisory and the first release that includes the fix for each vulnerability. The right column indicates whether a release is affected by any of the vulnerabilities described in the collection of advisories and which release includes fixes for those vulnerabilities.
Cisco ASA Software
Cisco ASA Software Release CVE-2021-1445 (CSCvv56644) CVE-2021-1504 (CSCvv65184) Fixed Release for all Vulnerabilities Described in the Bundle of Advisories Earlier than 9.71 Not vulnerable Not vulnerable Migrate to a fixed release. 9.71 Migrate to a fixed release. Migrate to a fixed release. Migrate to a fixed release. 9.8 9.8.4.34 9.8.4.35 9.8.4.35 9.9 9.9.2.85 9.9.2.85 9.9.2.85 9.10 Migrate to a fixed release. Migrate to a fixed release. Migrate to a fixed release. 9.12 9.12.4.13 9.12.4.10 9.12.4.18 9.13 9.13.1.21 9.13.1.21 9.13.1.21 9.14 9.14.2.8 9.14.2.4 9.14.2.13 9.15 9.15.1.7 9.15.1.7 9.15.1.15 1. Cisco ASA Software releases 9.7 and earlier, as well as Release 9.10, have reached end of software maintenance. Customers are advised to migrate to a supported release that includes the fix for this vulnerability.
Cisco FTD Software
Cisco FTD Software Release CVE-2021-1445 (CSCvv56644) CVE-2021-1504 (CSCvv65184) Recommended Release for All the Vulnerabilities Described in the Bundle of Advisories Earlier than 6.2.21 Migrate to a fixed release. Migrate to a fixed release. Migrate to a fixed release. 6.2.2 Migrate to a fixed release. Migrate to a fixed release. Migrate to a fixed release. 6.2.3 Migrate to a fixed release. Migrate to a fixed release. Migrate to a fixed release. 6.3.0 Migrate to a fixed release. Migrate to a fixed release. Migrate to a fixed release. 6.4.0 6.4.0.12 (May 2021) 6.4.0.12 (May 2021) 6.4.0.12 (May 2021) 6.5.0 Migrate to a fixed release. Migrate to a fixed release. Migrate to a fixed release 6.6.0 6.6.4 6.6.4 6.6.42 6.7.0 6.7.0.1 6.7.0.1 6.7.0.2 1. Cisco FMC and FTD Software releases 6.0.1 and earlier, as well as releases 6.2.0 and 6.2.1, have reached end of software maintenance. Customers are advised to migrate to a supported release that includes the fix for this vulnerability.
2. The First Fixed Release for the 6.6.0 code train was 6.6.3; however, due to upgrade issues associated with CSCvx86231 the recommended release is 6.6.4.
To upgrade to a fixed release of Cisco FTD Software, do one of the following:
- For devices that are managed by using Cisco Firepower Management Center (FMC), use the FMC interface to install the upgrade. After installation is complete, reapply the access control policy.
- For devices that are managed by using Cisco Firepower Device Manager (FDM), use the FDM interface to install the upgrade. After installation is complete, reapply the access control policy.
-
The Cisco Product Security Incident Response Team (PSIRT) is not aware of any public announcements or malicious use of the vulnerabilities that are described in this advisory.
-
Cisco would like to thank Nikita Abramov of PT Security for reporting these vulnerabilities.
-
To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.
-
Show LessVersion Description Section Status Date 1.0 Initial public release. — Final 2021-APR-28
-
THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.
A standalone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy and may lack important information or contain factual errors. The information in this document is intended for end users of Cisco products.