Email action fails when using special characters

Available Languages

Download Options

  • PDF     (5.3 KB)
    View with Adobe Reader on a variety of devices
Updated:November 4, 2011
Document ID:113309

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Introduction

This document provides information about the solution to this problem:

Email action fails when using special characters: #, &, x, 8

Prerequisites

Requirements

Cisco recommends that you have knowledge of Tidal Enterprise Scheduler 5.3.1.x.

Components Used

The information in this document is based on the Tidal Enterprise Scheduler 5.3.1.x.

Conventions

Refer to Cisco Technical Tips Conventions for more information on document conventions.

Problem

Email actions fail if the customer uses a joboutput variable which is evaluated to include one of these special characters: #, &, x, 8 .

Solution

Complete these steps in order to download the latest version of the master:

  1. Go to http://www.cisco.com/cisco/software/navigator.html?i=!ch (registered customers only) .

  2. Select Products > Network Management and Automation > Data Center Management and Automation > Workload Automation > Cisco Tidal Enterprise Scheduler > Cisco Tidal Enterprise Scheduler Base Products.

Related Information

Revision History

Revision Publish Date Comments
1.0
04-Nov-2011
Initial Release

Was this Document Helpful?

FeedbackFeedback

Contact Cisco