Introduction
This document describes how to overcome when no netflow data and application statistics are shown as MACE is not enabled on ISR 2951.
Background Information
There is no Netflow data and application statistics shown for few of our devices.
For example:
Product : Cisco 2951 Integrated Services Router G2 Version : 15.1(4)M4
following cisco recommended way of configuring net flow for ISR Devices -
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-0/user/guide/pi_ug/setup_monitor.html#77453
Trying to enable AVC / MACE on 2900 ISR , mace command is not available, following G2 configuration
TAC Analysis and Recommendation
Evaluation license for datak9 package that needs to be applied on the router as it is not in use at this time.
Index: 5 Feature: datak9 Version: 1.0
License Type: EvalRightToUse
License State: Active, Not in Use, EULA not accepted
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 4 days
Period used: 0 minute 0 second
License Count: Non-Counted
License Priority: None
Store Index: 2
Store Name: Built-In License Storage
To apply it, accept the End User License agreement (EULA) using this command and then change the boot level to datak9 and reload the router:
Router(config)# license accept end user agreement
Router(config)# license boot module c2900 technology-package datak9
After enabling the datak9, you can see the flows.
how do we make evaluation license as permanent > It will automatically be permanent after time period stated under the feature.
Related Information
Feedback