Guest

Cisco VG200 Gateway

NOTE: This product is no longer being sold and might not be supported. View the End-of-Life Notice to learn:
  • End-of-sale and end-of-life dates
  • What replacement products are available
  • Information about product support

The Cisco VG200 allows customers to connect Cisco IP telephony solution products such as IP phones to the PSTN or to a PBX. Analog telephones or fax machines can also be connected. The compact Cisco VG200 chassis with a single 10/100 BASE-T Ethernet port would contain a network module (NM) that provides digital signal processor (DSP) resources, and VICs and/or VWICs, which are used to provide the physical voice interfaces.

A typical configuration includes a NM-2V network module and two VICs. These VICs can be any combination of foreign exchange station (FXS), foreign exchange office (FXO), ear and mouth (E&M), or Basic Rate Interface (BRI) (both user and network sides) for a total of four channels.

In another common configuration of the Cisco VG200, the digital T1/E1 packet voice trunk network module is used. The module can support up to 60 voice channels (two E1 interfaces in a single network module). This packet voice trunk module supports both on- and off-premise connections to PBXs and PSTNs.

With 12.2(13)T, the NM-HDV card can be used to support not only digital voice termination, but also concurrent support for transcoding and conferencing services.

Let Us Help