Cisco Aironet 1570 Series Outdoor Access Points Ordering Guide
Available Languages
Contents
2. Cisco Aironet 1570 Series Outdoor Access Points
3. Cisco Software Subscription
4. Cisco Aironet 1570 Series Components
Accessory Kit and Optional Items
RF Cables and Lightning Arrestors
Cisco Tools for Quoting and Ordering
This document describes the Cisco Aironet® 1570 Series Outdoor Access Points listed in Table 1. It also describes the various packaging structures and configurations available for different models. In this document, you’ll also find part numbers and other information necessary to help you choose and order products.
Table 1. Cisco Aironet 1570 Series Access Points
| Model |
Antenna Type(s) |
Power Option(s) |
| AP1572EAC |
E: External antennas |
AC: AC power |
| AP1572IC |
I: Internal antennas |
C: Cable backhaul and power-over-cable |
| AP1572EC |
E: External antennas |
C: Cable backhaul and power-over-cable |
For more detailed information on Aironet 1570 Series access point products, visit:
http://www.cisco.com/c/en/us/products/wireless/aironet-1570-series/index.html.
2. Cisco Aironet 1570 Series Outdoor Access Points
Aironet 1570 Series Outdoor Access Points (APs) are ideal for both enterprise and carrier-class network operators. They are the industry’s highest-performing outdoor APs and support the latest Wi-Fi standard, 802.11ac. The 1570 Series APs provide high throughput over a large area with pervasive coverage. A fully operational system contains the following items:
1. Access point
2. Cable modem right-to-use (RTU) license (1572IC and 1572EC models only)
3. Software
4. External antennas (1572EAC and 1572EC models only)
5. GPS (optional)
6. Mounting brackets
7. Power source
8. Small Form-Factor Pluggable (SFP; optional)
9. Accessories (optional)
Table 2 lists the part numbers for 1570 Series access points in a variety of configurations.
Table 2. Cisco Aironet 1570 Series Models
| Part Number |
Description |
| AIR-AP1572EAC-x-K9 |
E: External Antenna, AC Power |
| AIR-AP1572IC1-x-K9 |
I: Internal Antenna, C1: Power-over-Cable; NA-DOCSIS 42/ 88 MHz |
| AIR-AP1572IC2-x-K9 |
I: Internal Antenna, C2: Power-over-Cable; NA-DOCSIS 85/ 108 MHz |
| AIR-AP1572IC3-x-K9 |
I: Internal Antenna, C3: Power-over-Cable; Euro-DOCSIS 65/ 108 MHz |
| AIR-AP1572IC4-x-K9 |
I: Internal Antenna, C4: Power-over-Cable; Japan-DOCSIS 65/ 108 MHz |
| AIR-AP1572EC1-x-K9 |
E: External Antenna, C1: Power-over-Cable; NA-DOCSIS 42/ 88 MHz |
| AIR-AP1572EC2-x-K9 |
E: External Antenna, C2: Power-over-Cable; NA-DOCSIS 85/ 108 MHz |
| AIR-AP1572EC3-x-K9 |
E: External Antenna, C3: Power-over-Cable; Euro-DOCSIS 65/ 108 MHz |
| AIR-AP1572EC4-x-K9 |
E: External Antenna, C4: Power-over-Cable; Japan-DOCSIS 65/ 108 MHz |
Use Table 2 and the remainder of this guide to identify the items that you need for your deployment. Note that some components are available as a “configurable” option or as a “spare.”
● A “configurable” option ships in the same main box as the AP. For example:
AIR-ACCPMK1570-1 is a “configurable” option and, if so ordered, is shipped alongside the AP in the same box.
● A “spare” option is denoted with an equals (=) sign at the end of the part number. For example:
AIR-ACCPMK1570-1= is a “spare” and, if so ordered, is shipped in separate packaging.
If making a return or trade-in, you might need to remove any option you installed before returning your access point to Cisco. Consult your Cisco representative for additional assistance in ordering mesh and other networking equipment.
Table 3 lists the standard items that could be included with each specific model.
Table 3. Standard Items Included with Each Specific Model
| AP1572EAC |
AP1572IC |
AP1572EC |
|
●
Access point
●
Sealant tape for the antenna connections
●
Fitting dome/gland: liquid-tight adapter for sealing the cable ingress connection
●
Grounding lug
●
Antiseizing compound for the mounting brackets
●
DC power connector
|
●
Access point
●
Grounding lug
●
Antiseizing compound for the mounting brackets
|
●
Access point
●
Sealant tape for the antenna connections
●
Fitting dome/gland: liquid-tight adapter for sealing the cable ingress connection
●
Grounding lug
●
Antiseizing compound for the mounting brackets
|
3. Cisco Software Subscription
The cable modem (CM) license applies only to the two Aironet 1570 Series models that have built-in cable modems, the AP1572IC and AP1572EC. These two AP models come with CM hardware capable of operating with up to 24x8 channel bonding on the downstream (DS) and upstream (US), respectively. However, there is a right-to-use (RTU) license (see Table 4) that must be selected in association with this hardware for the user to have the right to operate these AP models. At a minimum, license option LIC-CM1570-08CH shall be selected in association with AP1572IC and AP1572EC, even if the operator chooses not to use the CM. The RTU authorizes the user to operate the CM hardware with up to 8, 16, or 24 bonded channels on the downstream. This RTU can be selected as a “configurable” option at the time of the AP order, or as a “spare” at a later date. Note, however, that there is no CM RTU upgrade part number available for this RTU license, and thus the user may want to consider purchasing a 16- or 24-channel license at the time of ordering if planning to upgrade the CM operation at a later time.
Table 4. Cisco Aironet 1572IC and 1572EC Cable Modem RTU Software License
| Part Number |
Description |
| LIC-CM1570-08CH |
License: Cable Modem (RTU), up to 8 Downstream Channel Bonding |
| LIC-CM1570-16CH |
License: Cable Modem (RTU), up to 16 Downstream Channel Bonding |
| LIC-CM1570-24CH |
License: Cable Modem (RTU), up to 24 Downstream Channel Bonding |
The 1570 Series requires, at a minimum, AP software release 8.0MR or later (see Table 5). Traditionally, additional functions are available for the AP with more recent releases. Please see the applicable release notes for more information about features available with the latest software releases. You can specify the AP to be loaded and shipped with the default unified software as either “unified mesh” (SW1570-UM01A01-K9) or “unified local” (SW1570-UL01A01-K9) mode during the ordering process.
Table 5. Minimum AP Software Releases
| Part Number |
Minimum Software Release |
| SW1570-UM01A01-K9 |
SW Cisco AP1570: Unified Mesh (e.g., 8.0.xxx) + IOS (e.g., 15.2.4-yyy); IOS added when available |
| SW1570-UL01A01-K9 |
SW Cisco AP1570: Unified Local (e.g., 8.0.xxx) + IOS (e.g., 15.2.4-yyy); IOS added when available |
4. Cisco Aironet 1570 Series Components
The Aironet 1572IC access point has four internal dual-band (2.4- and 5-GHz) antennas that reside under a sealed random and cannot be accessed or configured by the user.
The Aironet 1572EAC and 1572EC access points are equipped with four separate N-type female connectors that carry dual-band signals or, through software control, can be configured such that the bottom pair of connectors carry only 2.4-GHz signals and the top pair carry only 5-GHz signals. This gives users multiple configuration options, as shown in Figure 1.
Table 6 describes the antennas available for the Aironet 1572EAC and 1572EC access points. The table lists part numbers for the antennas as well as gain and other details.
Table 6. Antennas for the Cisco Aironet 1572EAC and 1572EC Access Point
| Part Number |
Frequency Band |
Gain |
Type |
Required Quantity and Note |
| AIR-ANT2568VG-N |
2.4/5 GHz |
6/8 dBi |
Omnidirectional |
4; default recommended for maximum omni performance |
| AIR-ANT2547VG-N |
2.4/5 GHz |
4/7 dBi |
Omnidirectional |
4 |
| AIR-ANT2588P3M-N= |
2.4/5 GHz |
8/8 dBi |
Directional |
1; 3x cables and lightning arrestors may be needed |
| AIR-ANT2513P4M-N= |
2.4/5 GHz |
13/13 dBi |
Directional |
1; 4x cables and lightning arrestors may be needed |
| AIR-ANT2480V-N |
2.4 GHz |
8 dBi |
Omnidirectional |
2 |
| AIR-ANT2450V-N |
2.4 GHz |
5 dBi |
Omnidirectional |
2 |
| AIR-ANT2413P2M-N= |
2.4 GHz |
13 dBi |
Directional |
1; antenna mount kit may be used to attach directly to AP |
| AIR-ANT5180V-N |
5 GHz |
8 dBi |
Omnidirectional |
2 |
| AIR-ANT5114P2M-N= |
5 GHz |
14 dBi |
Directional |
1; antenna mount kit may be used to attach directly to AP |
For additional antenna specifications, see the Cisco Aironet Antenna and Accessories Reference Guide.
The access points are provided with a sealant tape to protect the antenna connector from weather. Consult the installation guide for proper installation.
All Aironet 1570 Series access points have a built-in GPS receiver. To use the GPS functionality, you should order and install a GPS antenna (see Table 7). The GPS antenna can be selected as a “configurable” option at the time of the AP order or as a “spare” at a later date.
Table 7. GPS Antennas for the Cisco Aironet 1570 Series Access Points
| Part Number |
Description |
| AIR-ANT-GPS-1 |
GPS Antenna |
Aironet 1570 Series outdoor access points can be mounted on a cable strand, poles, or walls. Table 8 provides the mounting options for each model.
Table 8. Mounting Options for the Cisco Aironet 1570 Series
| Part Number |
Description |
AP1572EAC |
AP1572IC |
AP1572EC |
| AIR-ACCSMK1570-1 |
Accessory, Strand-Mount Kit 1 (SMK1) |
|
√ |
|
| AIR-ACCSMK1570-2 |
Accessory, Strand-Mount Kit 2 (SMK2) |
|
√ |
√ |
| AIR-ACCSMK1570-3 |
Accessory, Strand-Mount Kit 3 (SMK3) |
|
√ |
√ |
| AIR-ACCPMK1570-1 |
Accessory, Pole-Mount Kit 1 (PMK1) |
√ |
|
√ |
| AIR-ACCPMK1570-2= |
Accessory, Pole/Wall-Mount Kit 2 (PMK2) |
√ |
|
√ |
| AIR-ACCPMK1570-3= |
Accessory, Pole/Wall-Mount Kit 3 (PMK3) |
|
√ |
|
| AIR-ACCAMK-1= |
Accessory, Antenna Mount Kit 1 (AMK1) |
√ |
|
√ |
Table 9 provides a fuller description of each of the mounting options.
Table 9. Mounting Brackets for the Cisco Aironet 1570 Series
| Part Number |
Description |
| AIR-ACCSMK1570-1 |
Default SMK. Does not offer any allowance for data cable under the steel strand. |
| AIR-ACCSMK1570-2 |
Fixed-height SMK. Offers approximately 1.7 inches of clearance for data cable below steel strand. |
| AIR-ACCSMK1570-3 |
Adjustable-height SMK. Offers approximately 2.7 inches of clearance for data cable below steel strand. |
| AIR-ACCPMK1570-1 |
Vertical pole only (2 to 6 inches in diameter). |
| AIR-ACCPMK1570-2= |
Wall or pole (2 to 16 inches in diameter) with tilt adjustment. |
| AIR-ACCPMK1570-3= |
Wall or pole (2 to16 inches in diameter) with tilt adjustment. |
| AIR-ACCAMK-1= |
Attaches certain directional antennas directly to the AP (e.g., AIR-ANT2413P2M-N= or AIR-ANT5114P2M-N=) |
Aironet 1570 Series Outdoor Access Points can be powered by AC, DC, power over cable (PoC), and Power over Ethernet (PoE). Table 10 shows the powering options for each model.
Table 10. Powering Options for the Cisco Aironet 1570 Series
| Powering Option |
AP1572EAC |
AP1572IC |
AP1572EC |
| AC (Alternating Current) |
√ |
|
|
| PoC (power over cable) |
|
√ |
√ |
| PoE (power over Ethernet) |
√ |
|
|
| DC (Direct Current) |
√ |
√ |
√ |
To power the AP1572EAC from an AC power source, an AC cable is required. When powering the 1572EAC from streetlight power, note that the maximum voltage is 277 VAC and requires the power adapter and the streetlight tap. The Aironet 1570 Series also offers an option of a field-installable AC power cable connector kit to give the user the option to source the AC cable locally and terminate the AP end with this compatible connector. Check the hardware installation guide for these options. Table 11 lists the AC cable, tap, and field-installable connector kit part numbers.
Table 11. AC Cables, Streetlight Tap, and Connector Kit
| Part Number |
Description |
| AIR-CORD-R3P-40NA= |
AC power cord, 40 ft (12m); North American plug; 1520/1550/1570 Series |
| AIR-CORD-R3P-40UE= |
AC power cord, 40 ft (12m); EU unterminated end; 1520/1550/1570 Series |
| AIR-ACC15-AC-PLGS= |
Accessory, AC-Power Connector Kit, Field-Install, bag of 5 units |
| AIR-PWR-ST-LT-R3P= |
Power cord, 4 ft, Streetlight Tap |
The AP1572EAC can be powered over the Ethernet connection. Power can be sourced directly from an appropriately powered Universal Power over Ethernet (UPoE) switch port or from the inline power injector listed in Table 12.
Table 12. Power Injector for Use with PoE
| Part Number |
Description |
| AIR-PWRINJ1500-2= |
1520/1550/1570 Series Power Injector; for indoor environments only |
You must also specify the country type AC power cord for the power injector.
The Aironet 1570 Series access points use a standard RJ-45 Ethernet connector. Cisco does not provide an Ethernet cable for the 1570 Series. You will need to source an outdoor-rated, Category 5 or better Ethernet cable and shielded RJ-45 connectors from a local supplier. A liquid-tight gland is provided with the access point to seal this cable entry point from weather.
The Aironet 1570 Series access points support power from an external DC power supply. Check the data sheet for the associated voltage, current range, and power consumption. A DC terminal block is included with the AP1572EAC for this purpose. While not common, the cable-powered AP1572IC and AP1572EC can also use DC power. For that, an accessory kit is available to provide DC terminal block connectors (see the accessories section/table). Note that these DC connectors are specifically for the Aironet 1570 Series and should not be interchanged with DC terminal blocks for the previous AP1520, AP1550, or 1530 models. When using DC power, please consult the hardware installation guide for instructions on how to correctly assemble the connector.
All the Cisco Aironet 1570 Series Outdoor Access Points support fiber backhaul. The SFP is built into the AP, but the mechanical interface is external to the AP. A special SFP adapter/gland kit is needed to interface the fiber cable to the AP. Table 13 lists the SFP and the adapter/gland accessory kit, and Figure 2 illustrates them.
Table 13. SFP Components for use with AP1570
| Powering Option |
Description |
| AIR-ACC15-SFP-GLD= |
Accessory, SFP external Gland/Adapter, bag of 5 units |
| GLC-LX-SM-RGD= |
1000BASE-LX single-mode Rugged SFP |
| GLC-SX-MM-RGD= |
1000BASE-SX multi-mode Rugged SFP |
Accessory Kit and Optional Items
RF Cables and Lightning Arrestors
For customer convenience, Cisco offers RF cables to remotely attach external antennas to the Cisco Aironet 1572EAC and 1572EC access points. When you use cables between the antenna and these access points, Cisco recommends that you add lightning arrestors to each port, particularly when the deployment is in an area with high lightning activity. The lightning arrestor listed here, when properly grounded, provides robust protection against induced currents in the RF cabling generated by nearby lightning strikes. The lightning arrestor does not protect against direct lightning strikes on the access point. Table 14 lists and describes the RF cables and lightning arrestor parts.
Table 14. RF Cables and Lightning Arrestor
| Part Number |
Description |
| AIR-CAB005LL-N= |
RF Cable, 5 ft Low-loss, N connectors |
| AIR-CAB010LL-N= |
RF Cable, 10 ft Low-loss, N connectors |
| AIR-ACC245LA-N= |
Accessory, 2.4 and 5 GHz lightning arrestor, N connector |
A number of additional accessories are provided with the Aironet 1570 Series to facilitate the completeness of certain applications and installation. Table 15 lists the accessory parts and kits.
Table 15. Cisco Aironet 1570 Series Accessories
| Part Number |
Description |
| AIR-BAND-INST-TL= |
Accessory, Band installation tool (used for PMK2 and PMK3. Need one per installation crew) |
| AIR-ACC15-DC-PLGS= |
Accessory, DC-Power terminal plug/connector, bag of 10 units |
| AIR-ACC15-GLANDS= |
Accessory, Metal Cable Glands, bag of 10 units |
| AIR-ACC15-AC-CAP= |
Accessory, Cover-cap for AC-Power connector, bag of 10 units, for AP1572EAC/AP1552E |
| AIR-ACC15-N-CAP= |
Accessory, Cover-cap for N-connector, bag of 10 units, for AP1572EAC/AP1552E |
Tables 16, 17, and 18 list the part numbers for the Aironet 1570 Series Outdoor Access Points.
Table 16. AP1572EAC Part Numbers
| Product |
Description |
| Access Point |
|
| AIR-AP1572EAC-x-K9 |
AP 1572EAC, E: External Antennas, AC: AC power |
| Software |
|
| SW1570-UM01A01-K9 |
SW Cisco AP1570: Unified Mesh (8.0.xxx) + IOS(15.2.4-yyy); IOS added when available |
| SW1570-UL01A01-K9 |
SW Cisco AP1570: Unified Local(8.0.xxx) + IOS(15.2.4-yyy); IOS added when available |
| Antennas |
|
| AIR-ANT2568VG-N |
Antenna, Omni, 2/5GHz, 1-port, 6/8dBi (need 4x/AP1572E) |
| AIR-ANT2547VG-N |
Antenna, Omni, 2/5GHz, 1-port, 4/7dBi (need 4x/AP1572E) |
| AIR-ANT2588P3M-N= |
Antenna, Directional, 2/5GHz, 3-ports, 8/8dBi (need 1x/AP1572E), 3x Separate cables |
| AIR-ANT2513P4M-N= |
Antenna, Directional, 2/5GHz, 4-ports, 13/13dBi (need 1x/AP1572E), 4x Separate cables |
| AIR-ANT2480V-N= |
Antenna, Omni, 2GHz, 1-port, 8dBi (need 2x or 4x/AP1572E) |
| AIR-ANT2450V-N= |
Antenna, Omni, 2GHz, 1-port, 5dBi (need 2x or 4x/AP1572E) |
| AIR-ANT2413P2M-N= |
Antenna, Directional, 2 GHz, 2-ports, 13dBi (need 1x or 2x/AP1572E), cables built-in |
| AIR-ANT5180V-N= |
Antenna, Omni, 5GHz, 1-port, 8dBi (need 2x or 4x/AP1572E) |
| AIR-ANT5114P2M-N= |
Antenna, Directional, 5GHz, 2-ports, 14dBi (need 1x or 2x/AP1572E), cables built-in |
| AIR-ANT-GPS-1 |
Antenna, GPS |
| Mounting Kits |
|
| AIR-ACCPMK1570-1 |
Accessory, Pole-Mount-Kit 1, Basic (2-06 inch pole) |
| AIR-ACCPMK1570-2= |
Accessory, Pole-Mount-Kit 2, Advanced (2-16 inch pole, cobra-arm pole, Wall mount) |
| AIR-BAND-INST-TL= |
Accessory, Band installation tool (used for PMK2. Need 1x/Installation crew) |
| AIR-ACCAMK-1= |
Accessory, Antenna Mounting Kit (AMK); (used for AIR-ANT2413P2M-N= or AIR-ANT5114P2M-N=) |
| Power |
|
| AIR-CORD-R3P-40NA= |
AC pwr cord, 40 ft (12m); NA plug, for AP1572EAC/AP1552E |
| AIR-CORD-R3P-40UE= |
AC pwr cord, 40 ft (12m); EU unterminated end, for AP1572EAC/AP1552E |
| AIR-PWR-ST-LT-R3P= |
AC Pwr cord, 4 ft (1m); Street light pwr tap, for AP1572EAC/AP1552E |
| AIR-PWRINJ1500-2= |
PoE-In Power Injector Brick, for AP1572EAC/AP1552E |
| AIR-ACC15-AC-PLGS= |
Accessory, AC-Power plug/connector, Field-Install, Bag of 5, for AP1572EAC/AP1552E |
| AIR-ACC15-DC-PLGS= |
Accessory, DC-Power plug/connector, Bag of 10 units, for AP1572EAC |
| Fiber-SFP |
|
| AIR-ACC15-SFP-GLD= |
Accessory, SFP external Gland/Adaptor, Bag of 5 units, for AP1572EAC |
| GLC-LX-SM-RGD= |
1000BaseLX single-mode Rugged SFP, for AP1572EAC/AP1552E |
| GLC-SX-MM-RGD= |
1000BaseSX multimode Rugged SFP, for AP1572EAC/AP1552E |
| Accessories |
|
| AIR-ACC15-GLANDS= |
Accessory, Metal Cable Glands, Bag of 10 units, for AP1572EAC/AP1552E |
| AIR-ACC15-AC-CAP= |
Accessory, Cover-cap for AC-Power connector, Bag of 10 units, for AP1572EAC/AP1552E |
| AIR-ACC15-N-CAP= |
Accessory, Cover-cap for N-connector, Bag of 10 units, for AP1572EAC/AP1552E |
| RF Cables |
|
| AIR-CAB005LL-N= |
RF Cable, 5 ft Low-loss, w/N connectors for AP1572EAC/AP1552E |
| AIR-CAB010LL-N= |
RF Cable, 10 ft Low-loss, w/N connectors for AP1572EAC/AP1552E |
| AIR-ACC245LA-N= |
Accessory, 2.4 & 5 GHz lightning Arrestor, N-Connector |
Notes:
● For official pricings, check the Ordering Tool on the Cisco Web Site
● AP PIDs, "x" represents generic Regulatory Domain (RD). For proper RD assoc. w/ a country,
visit: http://www.cisco.com/go/aironet/compliance
● Some accessories can be ordered as an "option" in that they get shipped in the same box package in which the AP is shipped. These items are identified by the absence of an "=" at the end of the PID.
Table 17. AP1572IC Part Numbers
| Product |
Description |
| Access Point |
|
| AIR-AP1572IC1-x-K9 |
AP 1572IC1, I: Internal Antennas, C1: Cable Backhaul; NA-DOCSIS 42/88 MHz |
| AIR-AP1572IC2-x-K9 |
AP 1572IC2, I: Internal Antennas, C2: Cable Backhaul; NA-DOCSIS 85/108 MHz |
| AIR-AP1572IC3-x-K9 |
AP 1572IC3, I: Internal Antennas, C3: Cable Backhaul; Euro-DOCSIS 65/108 MHz |
| AIR-AP1572IC4-x-K9 |
AP 1572IC4, I: Internal Antennas, C4: Cable Bachhaul; Japan-DOCSIS 65/108 MHz |
| Part Number |
Description |
| CM RTU License |
|
| LIC-CM1570-08CH |
License: Cable Modem Right-to-Use (RTU), up to 8 Downstream Channel Bonding |
| LIC-CM1570-16CH |
License: Cable Modem Right-to-Use (RTU), up to 16 Downstream Channel Bonding |
| LIC-CM1570-24CH |
License: Cable Modem Right-to-Use (RTU), up to 24 Downstream Channel Bonding |
| Software |
|
| SW1570-UM01A01-K9 |
SW Cisco AP1570: Unified Mesh (8.0.xxx) + IOS(15.2.4-yyy); IOS added when available |
| SW1570-UL01A01-K9 |
SW Cisco AP1570: Unified Local (8.0.xxx) + IOS(15.2.4-yyy); IOS added when available |
| Antennas |
|
| AIR-ANT-GPS-1 |
Antenna, GPS |
| Mounting Kits |
|
| AIR-ACCSMK1570-1 ($0 "option") |
Accessory, Strand-Mount-Kit 1, Short, no data-cable clearance, for AP1572IC |
| AIR-ACCSMK1570-2 |
Accessory, Strand-Mount-Kit 2, Tall, approx. 1.7" data cable clearance, for AP1572IC |
| AIR-ACCSMK1570-3 |
Accessory, Strand-Mount-Kit 3, Adjustable, approx. 2.7" data cable clearance, for AP1572IC |
| AIR-ACCPMK1570-3= |
Accessory, Pole-Mount-Kit 3, Horizontal, 2-16' pole, cobra-arm, Wall mount),for AP1572IC |
| AIR-BAND-INST-TL= |
Band installation tool (used for PMK3. Need 1x/Installation crew) |
| Fiber-SFP |
|
| AIR-ACC15-SFP-GLD= |
Accessory, SFP external Gland/Adaptor, Bag of 5 units, for AP1572IC |
| GLC-LX-SM-RGD= |
1000BaseLX single-mode Rugged SFP, for AP1572IC |
| GLC-SX-MM-RGD= |
1000BaseSX multimode Rugged SFP, for AP1572IC |
| Accessories |
|
| AIR-ACC15-GLANDS= |
Accessory, Metal Cable Glands, Bag of 10 units, for AP1572IC |
| AIR-ACC15-DC-PLGS= |
Accessory, DC-Power connector, Bag of 10 units, for AP1572IC |
Notes:
● For official pricings, check the Ordering Tool on the Cisco Web Site
● AP PIDs, "x" represents generic Regulatory Domain (RD). For proper RD assoc. w/ a country,
visit: http://www.cisco.com/go/aironet/compliance
● Some accessories can be ordered as an "option" in that they get shipped in the same box package in which the AP is shipped. These items are identified by the absence of an "=" at the end of the PID.
Table 18. AP1572EC Part Numbers
| Product |
Description |
| Access Point |
|
| AIR-AP1572EC1-x-K9 |
AP 1572EC1, E: External Antennas, C1: Cable Backhaul; NA-DOCSIS 42/88 MHz |
| AIR-AP1572EC2-x-K9 |
AP 1572EC2, E: External Antennas, C2: Cable Backhaul; NA-DOCSIS 85/108 MHz |
| AIR-AP1572EC3-x-K9 |
AP 1572EC3, E: External Antennas, C3: Cable Backhaul; Euro-DOCSIS 65/108 MHz |
| AIR-AP1572EC4-x-K9 |
AP 1572EC4, E: External Antennas, C4: Cable Bachhaul; Japan-DOCSIS 65/108 MHz |
| CM RTU License |
|
| LIC-CM1570-08CH |
License: Cable Modem Right-to-Use (RTU), up to 8 Downstream Channel Bonding |
| LIC-CM1570-16CH |
License: Cable Modem Right-to-Use (RTU), up to 16 Downstream Channel Bonding |
| LIC-CM1570-24CH |
License: Cable Modem Right-to-Use (RTU), up to 24 Downstream Channel Bonding |
| Software |
|
| SW1570-UM01A01-K9 |
SW Cisco AP1570: Unified Mesh (8.0.xxx) + IOS(15.2.4-yyy); IOS added when available |
| SW1570-UL01A01-K9 |
SW Cisco AP1570: Unified Local(8.0.xxx) + IOS(15.2.4-yyy); IOS added when available |
| Antennas |
|
| AIR-ANT2568VG-N |
Antenna, Omni, 2/5GHz, 1-port, 6/8dBi (need 4x/AP1572E) |
| AIR-ANT2547VG-N |
Antenna, Omni, 2/5GHz, 1-port, 4/7dBi (need 4x/AP1572E) |
| AIR-ANT2588P3M-N= |
Antenna, Directional, 2/5GHz, 3-ports, 8/8dBi (need 1x/AP1572E), 3x Separate cables |
| AIR-ANT2513P4M-N= |
Antenna, Directional, 2/5GHz, 4-ports, 13/13dBi (need 1x/AP1572E), 4x Separate cables |
| AIR-ANT2480V-N= |
Antenna, Omni, 2 GHz, 1-port, 8dBi (need 2x or 4x/AP1572E) |
| AIR-ANT2450V-N= |
Antenna, Omni, 2 GHz, 1-port, 5dBi (need 2x or 4x/AP1572E) |
| AIR-ANT2413P2M-N= |
Antenna, Directional, 2 GHz, 2-ports, 13dBi (need 1x or 2x/AP1572E), cables built-in |
| AIR-ANT5180V-N= |
Antenna, Omni, 5GHz, 1-port, 8dBi (need 2x or 4x/AP1572E) |
| AIR-ANT5140V-N= |
Antenna, Omni, 5GHz, 1-port, 4dBi (need 2x or 4x/AP1572E) |
| AIR-ANT5114P2M-N= |
Antenna, Directional, 5GHz, 2-ports, 14dBi (need 1x or 2x/AP1572E), cables built-in |
| AIR-ANT-GPS-1 |
Antenna, GPS |
| Mounting Kits |
|
| AIR-ACCSMK1570-2 |
Accessory, Strand-Mount-Kit 2, Tall, approx. 1.7" data cable clearance, for AP1572EC |
| AIR-ACCSMK1570-3 |
Accessory, Strand-Mount-Kit 3, Adjustable, approx. 2.7" data cable clearance, for AP1572EC |
| AIR-ACCPMK1570-1 |
Accessory, Pole-Mount-Kit 1, Basic, (2-06 inch pole) |
| AIR-ACCPMK1570-2= |
Accessory, Pole-Mount-Kit 2, Advanced, (2-16 inch pole, cobra-arm pole, Wall mount) |
| AIR-BAND-INST-TL= |
Band installation tool (used for PMK2. Need 1x/Installation crew) |
| AIR-ACCAMK-1= |
Accessory, Antenna Mounting Kit (AMK); (used for AIR-ANT2413P2M-N= or AIR-ANT5114P2M-N=) |
| Fiber-SFP |
|
| AIR-ACC15-SFP-GLD= |
Accessory, SFP external Gland/Adaptor, Bag of 5 units, for AP1572EC |
| GLC-LX-SM-RGD= |
1000BaseLX single-mode Rugged SFP, for AP1572EC |
| GLC-SX-MM-RGD= |
1000BaseSX multimode Rugged SFP, for AP1572EC |
| Accessories |
|
| AIR-ACC15-GLANDS= |
Accessory, Metal Cable Glands, Bag of 10 units, for AP1572EC |
| AIR-ACC15-N-CAP= |
Accessory, Cover-cap for N-connector, Bag of 10 units, for AP1572EAC/AP1552E |
| AIR-ACC15-DC-PLGS= |
Accessory, DC-Power plug/connector, Bag of 10 units, for AP1572EC |
| Part Number |
Description |
| RF Cables |
|
| AIR-CAB005LL-N= |
RF Cable, 5 ft Low-loss, w/N connectors for AP1572EC |
| AIR-CAB010LL-N= |
RF Cable, 10 ft Low-loss, w/N connectors for AP1572EC |
| AIR-ACC245LA-N= |
Accessory, 2.4 & 5 GHz lightning Arrestor, N-Connector |
Notes:
● For official pricings, check the Ordering Tool on the Cisco Web Site
● AP PIDs, "x" represents generic Regulatory Domain (RD). For proper RD assoc. w/ a country,
visit: http://www.cisco.com/go/aironet/compliance
● Some accessories can be ordered as an "option" in that they get shipped in the same box package in which the AP is shipped. These items are identified by the absence of an "=" at the end of the PID.
Table 19 lists Cisco Technical Services for the Aironet 1570 Series Outdoor Access Points.
Table 19. Cisco Technical Services
| Service |
Description and Features |
| Cisco Smart Net Total Care™ Service |
●
Next-business-day, 8 x 5 x 4, 24 x 7 x 4, and 24 x 7 x 2 advance hardware replacement1
and onsite parts replacement and installation available
●
Global access to the Cisco Technical Assistance Center (TAC) 24 hours a day
●
Unrestricted access to the extensive Cisco.com resources, communities, and tools
●
Ongoing operating system software updates
2
within a software licensed feature set, if any
●
Proactive diagnostics and real-time alerts on Smart Call Home-enabled devices
|
| Cisco Smart Foundation Service |
●
Next-business-day advance hardware replacement as available
●
Business-hours access to SMB Cisco TAC (access levels vary by region)
●
Access to Cisco.com SMB knowledge base
●
Online technical resources through Smart Foundation Portal
●
Operating system software bug fixes and patches, if applicable
|
For more information about Cisco Technical Services, visit http://www.cisco.com/go/ts.
Cisco Tools for Quoting and Ordering
To place an order, visit the Cisco ordering website at http://www.cisco.com/en/US/ordering/index.shtml
The significant benefits offered by the Aironet 1570 Series Outdoor Access Points make them the natural choice for outdoor Wi-Fi connectivity. As with any technology investment, you have to consider the affordability of the new system. Financing from Cisco Capital® can make this easier. Whether through flexible repayments matching expenditure to benefit, mitigating cash flow issues, or negating capital expenditure with an operating lease, we can give you access to the right technology for your business, when you need it.
Cisco Capital can usually help remove or reduce barriers preventing you from obtaining the technology that can most benefit your business. Cisco Capital can:
● Remove cash flow issues, allowing you to spread the cost of your investment over a number of years
● Offer you flexible repayment terms matching expenditure to benefits, which means that payments can be timed to coincide with business benefits that may be seen later in the project, or deferred to meet your budget cycle
● Turn capital expenditures into operating expenditures through an operating lease that enables you to benefit from the value of the technology up-front
● Offer you a sale and lease-back arrangement (where available) that softens the initial costs by taking on existing commitments that may be attached to legacy equipment
For more information about Cisco Capital Financing, visit: http://www.cisco.com/web/ciscocapital/americas/us/index.html
Feedback